Audio headphones problem

Good morning,
unfortunately I'm here to ask your help.
When I plug my headphones in the jack connection, I continue hearing the sound from speakers. If I go to settings, then audio I cannot see headphones listed in output.
This is strange because there's no red light in the jack port, when I plug the cable I can hear some "connection sound", but then no audio from headphones.
It's like the system does not recognize the headphones. Of course I tried with different headphones, the problem still remains.
My macbook pro is early 2008 and runs Lion.

I would not force the headphones into the ipod if there is difficulty doing so. If you read line number 5 in the link below then you can request replacement headphones if you find yours faulty.
http://depot.info.apple.com/ipod/
Or take your nano to the local apple store and talk to someone at the genius bar if you have a local apple store.
GFF

Similar Messages

  • Skype Audio Headphone Problem

    So I use headphones on my laptop for just about everything. I am able to make Skype call audio go through my headphones but it makes all of my other audio (music, netflix, youtube, etc...) go through the laptop speakers. I have tried for about a week now to get both the audio from my Skype calls and my music to be played through my headphones, but I have been unable to make any progress whatsoever. My friend that I am usually Skyping with has it setup so that he can listen to music and our skype call all through his headphones, so I know it is possible. I just can't figure out how to achieve these settings for the life of me. Any help is greatly appreciated because Skype has been absolutely no help to me

    I have no doubt you either have an HP computer or another brand computer with the IDT chipset.   Whatever setting that gets it to work will not make any sense.  Here's an example of a person who resolved the problem on his computer:
    http://community.skype.com/t5/Windows-desktop-client/Skype-keeps-switching-to-the-speaker/m-p/287550...

  • T500 + Vista Ultimate Audio (Headphones) problem

    My new T500 running windows vista ultimate seems to be having some audio issues. The inbuilt speakers work fine and I hear everything well. However, if i plus any external speaker or headphones to the computer's headphones jack, there is no effect. The sound still comes from the inbuilt speakers instead if the headphones.
    I tried uninstalling the audio driver but it does not solve the problem. When I look into the device manager, it reports that the audio device is working properly.  I still tried to install the driver but the driver installation fails.
    any ideas or suggestions?

    Too bad Apple can't write software to run on Windows.
    iTunes is s h i t.
    I guess they don't care about Vista uesers

  • HP g6-1201tx audio headphone problem

    HI when i insert my headphones then i dont hear any sound in the headphones and the speakers make noise.Headphones are finr i have checked them. Plzz tell me whats the solution for it...

    Hi Ankitg6,
    If that is not an option let's work on the drivers then. I will get you to uninstall the sound driver and reinstall it. Below are a couple of links. The first is on how to uninstall the drivers and the second will be a link to the driver for your computer.
    Uninstalling driver in Device Manager:
    http://msdn.microsoft.com/en-us/library/windows/hardware/ff553572(v=vs.85).aspx
    Driver Download:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103089-1&cc=us&dlc=en&lc=en...=
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Location Of Audio Headphone Jack

    Hello, I have a Toshiba Laptop Satellite L875D-S7332. I want to buy an Audio Head Phone so that no one else but me hears the laptops audio sound. Problem is i don't know what head phone to buy and where on my laptop is the jack to connect it to! Can Someone help me! Thank You, heaven5733

    Hi heaven5733,
              cbwilsha is right. Now I just want to support cbwilsha. Here is the actual view and location of the audio headphone jack. See the image below.
    Hope this will work for you. ^_^
    BTW IF YOU THINK IT HELPS ALOT. PLEASE DONT BE AFRAID TO CLICK KUDOS star ^_^
    - cokies

  • Audio sync problem - simultaneous HDMI and analog output

    I'm currently running my audio out through my Geforce 460 via HDMI to my A/V receiver. I have a simultaneous stereo analog output running through my ASUS Xonar D2, using Pulseaudio & Amarok as the player (VLC-gstreamer backend).
    I use the HDMI and A/V receiver to power my main stereo in my living room, but on occasion when I want music around the house, I use the analog line out to send audio to an FM transmitter.
    The problem is, I'm running into audio sync problems. The audio starts out synchronised (at least to the naked ear) but within 20-30 seconds it is noticeably out of sync, with the analog audio (form my FM radio) running around a half second ahead of the HDMI output (my main speakers).
    So - where to begin finding where the sync problem is? The receiver? Conversions between 44Khz and 48Khz?
    Any help much appreciated - google-foo hasn't turned up anything obvious so far.

    Yeah - that was my thought - a very difficult, and probably insoluble problem as it stands. I can't just mute one of the devices as that would defeat the purpose of having multi-room music! Fortunately it's not too noticeable usually, as you can't usually hear the main stereo and the FM radios at the same time, unless you're standing in the right part of the house
    The analog splitter cable not really a goer, since running clean, crisp multi-channel HDMI with pass through when needed is the essential goal of the HTPC. So unless I was to switch inputs and or unplug cables...
    What I will end out doing, in the absence of a software solution, is hooking the FM transmitter directly to my receiver. I was going to just use the headphone-out jack of the receiver to feed audio to the FM transmitter, but the stoopid receiver can't output audio to external speakers at the same time as the headphone is plugged. To overcome this, I'll probably run a headphone amp off the receiver's RCA outputs, into the FM transmitter. Like this one: http://headamp.com/portable_amps/ae2/, or this one: http://www.amazon.com/Rolls-HA43-Headph … B00102ZOQC
    Last edited by sultanoswing (2013-11-13 06:15:11)

  • Audio boost problem

    i have a bb curve 8520, i pull in headphones to listen to music however everytime i answer calls or i make a call the sound cut off and i have troubleshooting on the phone it also occures to me when i watch videos or listen to music i desactived the audio boost many times but i still have the same problem .. so please can anyone help me??? thanks

    Welcome to the forum, s.destination. Sorry to hear you're having "audio channel problem." Perhaps if you gave us just a little more information, someone here might be able to help. Your decidedly terse first post doesn't give us much to go on.

  • M57 audio quality problem

    Hi everyone,
    I have 3 M57's with onboard Soundmax sound devices that have been downgraded to Win XP Pro w/SP3 and all of them are exhibiting audio quality problems.  It seems like that audio is distorted most of the time.  As an example, if a wave file is played 5 times it may sound distorted 3 out of the 5 playbacks.  The only way to describe the distortion is it sounds like the audio is being downsampled to 1kHz.
    I've also tried using speakers, headphones, etc.
    Any help would be appreciated.

    stmay wrote:
    Well, at least it's not just me.  We've got over 100 of these workstations to roll out and I can't get the audio to work either.  It's the exact same problem that mlieberum is having.  I've tried about every single thing I can possibly think of.  Everytime I think I've got it working, all of a sudden the sounds starts distorting.  Something weird that I've noticed is that if Windows Media Player is open and playing music, the audio works all the time.  As soon as you close media player, the sounds starts distorting again.
    I've contacted Lenovo twice and they were absolutely no help at all.  I've got to have 40 of these workstations done by the second week in January so I need to figure something out.  If anyone has any ideas, I'd certainly appreciate it.
    Thanks,
    Steve
    Well since you said any ideas, the guy I helped out with his A52 sound drivers got good results from this site here
    http://www.drivermax.com/index.htm
    Linux Registered User # 475019
    Linux: Ubuntu 8.04,AntiX 8.2,Xandros 4

  • Itunes wont launch due to audio configuration problem

    Itunes won't launch saying there is a audio configuation problem, this started all the sudden no new software added no updates, no configuration changes. I've tried uninstalling and reinstalling without improvement and all other audio programs work fine. any ideas?

    This is usually a Quicktime problem, see this article:
    http://docs.info.apple.com/article.html?artnum=304424

  • How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

    How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
    To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips.  This operation has been stalled by the spinning ball. Shut down restart has not helped.
    The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
    What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

    How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
    To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips.  This operation has been stalled by the spinning ball. Shut down restart has not helped.
    The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
    What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

  • CS4 Audio Export Problem

    Hi
    I'm fairly new to CS4 and have picked up an audio export problem, more than likely with a setting of sorts. For some reason when I export to MPEG2 -DVD via the Media Encoder, the video portion is fine as well as any audio that has been placed and edited on tracks audio 1 and 2 in PP. However, if there is additional audio placed on tracks 3 or 4 for example (say a music MP3 overlay) then this does not come out ... only audio placed on tracks 1 and 2 in PP come out. I have checked the obvious like making sure the tracks aren't muted etc but to no avail. Also tried changing from PCM audio to MPEG ... Stereo to 5.1 mixdown ... nothing doing.
    Any help would be greatly appreciated.
    Thanks and regards
    Videoman 1
    SA

    Thanks Harm ... got SnagIt and with a few helpful YouTube tutorials ... am in business. Hunt and John, also thanks ... the other method equally as good. Now, I have attempted to attach my screen shot which should display my CS4 timeline and associated audio monitor windows above. By the way, this was for a wedding and as indicated, you will notice an MP3 lying in audio track 3 which as mentioned is my problem as it is not audible after render via Media Encoder. But remember, the moment I slip this MP3 up into audio track 1 or 2 above ... problem solved. I know there must be something small like a setting gone wrong or incorrect. As mentioned, any help would greatly appreciated.
    Thanks to you all.
    Regards Paul ( Vryheid, South Africa )

  • Audio sync problem with videos imported from iPod Touch

    I have an iPod Touch 4th Generation that I used to shoot video at a family birthday party. When I imported the footage into iMovie '11, the audio is not in sync with the video (video is about two seconds behind audio) and there is only the left channel of audio. I verified that the video on the iPod plays just fine--no audio sync problem, both left and right channels work. I just upgraded to iOS 5 on the iPod Touch. The iMac is running Snow Leopard 10.6.8.
    As a workaround, I can import the video into iPhoto instead. When I play the video in iPhoto, there are no audio sync problems and both channels of audio can be heard. I have imported other iPod Touch videos successfully into iMovie '11 in the past few months, but this has been the first time these problems have occurred. Any help would be appreciated.

    Premiere cannot handle clips with variable framerate.
    Your converted clips need to have constant framerate.
    Otherwise use a converter like Handbrake.

  • When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can you please help me?

    When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can anyone please help me?
    Sincerely,
    Eric

    Run this when you have the problem and post the results here.
    EtreCheck
    This will tell us what is loaded

  • Mac mini audio output problems

    This is similar to a problem that appeared before, but with a different twist.
    On 4 July all was well. On 5 July I switched on and there was no "chord" from the Mac. When I collected my mail - no sound from my speakers (which are part of my screen). Logged on to a couple of sites - no sound.
    The System Profiler, under the "Audio (Built In)" category, says: "No Built-in Audio." I know that's wrong because it's always worked before and when I plug my headset in it works fine.
    When I go to the Sound preferences panel in System Preferences, it finds the headset but if I unplug that it finds nothing.
    I tried running the hardware test (by putting in the OS X install disc and holding D during startup.) It couldn't find a problem.
    So, as far as I can see, audio output is fine for the USB headset output but not for the others. Is there a simple fix? The nearest Apple store is about 200 miles away and I don't fancy the idea of posting the Mac off.
    (And I think it's still under warranty for a couple more weeks.)
    Mac mini   Mac OS X (10.4.10)  

    hello mini users with the "no audio output" problem
    it seems that there are faulty output jacks in the macbook and the mac mini
    there are two things you can try:
    i tried everything and began thinking about what new software i had installed. it was "macam" which enables you to use older webcams on OSX. i needed that to use my webcam on skype.
    macam installs a file called "macam.component"
    if you have the same, do this - take that file out of:
    (your hard drive)/library/quicktime - macam.component
    and just put it on your desktop
    restart, then in your sound pref's choose your audio output (if doesn't work restart again)
    the first time i took it out, i had my sound back instantly, another time i had to choose audio output in sound prefs. you kind of have to try different things. after you get your sound back, you can put back "macam.component" to use your webcam.
    it seems macam causes the problem, the two can not work at the same time.
    the second thing: if you dont have "maccam" try plugging and unplugging output jack a few times and restarting until you have sound.
    the problem still could be with the OSX 10.4.10 update / quicktime...or maybe even a hardware problem like others with macbooks were saying (with the red light), not sure.
    people with macbooks and who have the red light on, say to use a paperclip to turn off the switch inside.
    my mini does not have a red light on. i tried using a paperclip but it doesnt work.
    hope this helps, beleive me i feel your pain!!!!
    what good is a computer without sound?
    extremely annoying problem that i hope apple looks into and fixes
    -andrew

  • Itunes can't run bc of audio configuration problem

    Well I've been using itunes for about 2 years now and just recently i installed the newer version. It was working fine until today when my computer told me ther was some kind of computer error and that i should do a system restore. So i did a restore to about 2 weeks ago which was before i updated my itunes. And then i was getting the message that my itunes was missing files and could not run. So i ran a repair on it and still got the same error. Then I deleted it adn reinstalled and I got the error "Itunes cannot run because it has detected a problem with your audio configuration.
    So then I undid the system restore and tried itunes to see if it would work. And I was still getting the same message that itunes cannot run because it has detected a problem with your audio configuration. So then I uninstalled it and reinstalled it and still getting the same message.
    Can someone help me out? What problem would it be with my audio configuration? I haven't changed anything. Is there something i can adjust to fix the problem? I'm clueless....

    the message is typically produced by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
    perhaps let's start with the following document:
    iTunes 7 for Windows: iTunes had detected an audio configuration problem
    ... but if no joy there, try this alternate technique for swapping out your QuickTime:
    head into your Add/Remove programs. uninstall QuickTime.
    Next, we’ll manually remove any leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
    7. Restart your computer.
    next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    switch off antivirus and antispyware applications prior to the repair install.
    go into Add/Remove and select itunes. click "Change" and then click "Repair".
    if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

Maybe you are looking for