Audio Hijack & Screensaver(s) [Not Working]

I am having a problem with Audio-Hijack PRO & my screensaver, and, I am hoping maybe someone here has come across this.
If I have a recording in Audio Hijack scheduled to go off at 3:00am, it has no problem bringing the monitor out of sleep, however, the screensaver or monitor sleep never kicks back in, and, I am a bit worried that this may do damage to my monitor.
Has anyone ever come a across any problems like this with audio-hijack ?
Another thing that happens is, if I start a manual record of the sound of the system, the screensaver never kicks in, and, the monitor never goes back to sleep.
This is really becoming frustrating, and, i am hoping I can get some answers here. if not, i appreciate you taking the time to read this.
Is there a setting in MAC OS X that you can set so programs running will still allow screensavers?

Hi,
Did you burn a set of the HP Recovery Disks? You mentioned that the reformat failed. Is that correct? Did you try a full HP Recovery? If not, then backup your data to external media. Boot up to the HP Blue screen and first try diagnostics and see how that goes. If that is successful, then boot again up to the HP blue screen and try Recovery.
If you don't have a set of the HP Recovery Disks and the Recovery process fails from the HP blue screen then you need to order a set of the HP Recovery Disks from HP. HP Recovery Disks.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

Audio CD import is not working the cd is ejected before itunes can read it

audio CD import is not working the cd is ejected before itunes can read it. Does anyone know how to fix this?
Lainey

Does this happen with all cd's or one in particular?
Reset the SMC http://support.apple.com/kb/HT3964
Reset the PRAM http://support.apple.com/kb/HT1379
Try a cleaning disc. You can get them at places like Radio Shack.
If nothing helps your optical drive has probably failed. You can replace it or purchase an inexpensive external drive. Don't buy the Apple SuperDrive as it won't work with macs that have a built in drive.

Screensaver is not working in OSX Yosemite

Hi,
My screensaver is not working in OSX Yosemite on my macbook pro late 2008
Can't solve it by my self..

I had noticed I was having this issue too, and my screensaver never kicking in, and just going to sleep with it never kicking in.
I had gone in and checked to see if any of the settings had got changed or deleted in the system upgrade, but they were all still set at what I had them at prior... so, did as some attempted above also, and adjusted the times for it to kick in, and still nothing. Worked when I would hit 'Preview', but still not kick in at the interval time.
What I just did to get it to work, was just to simply go into System Preferences>Desktop & Screensaver, and just reselected the folder of images that I want to be used, in my case, a folder of images in my iPhoto. And it now works.
Apparently, it wasn't working, because, even though it was still selected to use that folder in iPhoto, something must have changed in the upgrades, which might of had something to to with the iPhoto update too, where it had to update my iPhoto library upon relaunch... and my screensaver settings were set to access that older directed to folder within Library, that was updated in the new release... and so, just repointing it to that folder now in iPhoto, got it to work.
At least, that is my figurin', and I'm stickin' to it!

Beats Audio Control Panel software not working after Windows 10 upgrade.

Beats Audio Control Panel software not working after Windows 10 upgrade. the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device? IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?

Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver. I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update. After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.

HT6114 my audio midi setup is not working correctly since the install of maverick os

my audio midi setup is not working correctly since the install of maverick os

The upgrade may have reset to default settings ..
Check System Preferences > Sounds > Output
Make sure the correct device is selected and the Mute box is not checked.

Audio Jack in front not working.

Hi, when I bought my HP Pavilion p6823w Desktop PC, from walmart I hooked it up correctly. When I booted for the first time, I got a Blue Screen of Death, and the problem system repair said it was my IPOD cord was plugged into a USB port. Without the IPOD hooked up to it. I couldn't boot up, so I ran the system repair. the reason I didn't take it back to Wal-mart was because it worked fine without the Internet when I booted up again. I also bought a Belkin Wireless N Adapter for my Router. It worked fine with the internet.
Please read the whole thing, because this is all relative to why my audio jack isn't working. Thank you.
Until I started using the internet for long periods of time, I received problems.
For instance, it would disconnect me from the internet without telling me on the bottom side bar, it would tell me it's still working, when I keep getting web pages that are telling me the Internet Server is not found.
Another instance, when playing League of Legends, my latency would go up to 10,000. This is not normal.
The third instance, it would let me still play the game, but have high latency and lag out eventually.
The fourth instance, I cannot download any files on the computer anymore, even if the internet is connected.
The fifth instance, my monitor when it goes to sleep, will only display the background image, without any icons.
This must be a hardware problem, if the monitor won't load the desktop icons or start menu.
To make it work again, I have to turn it off manually with the button, and turn it back on again. And then it works.
I didn't notice this problem till after the 30 days of returning policy to walmart, because I turned off my computer when I was done using it.
The sixth instance, I can disable the network adapter, and re-enable it to make the internet work for a very short period of time, with the same errors of not being able to display web sites.
The seventh instance, I reformatted my computer because I thought it was a virus that norton couldn't find. It still had the same problems, but after the first few days it started up again.
The eighth instance, I received w WinSAT repair, because my game was freezing completely for about one second or two seconds.
The ninth instance, I contacted HP Support VIA Phone, and they could not fix the problem.
I enabled High Performance Power Supply.
I reset the IP Address.
I cleaned my temporary files.
I ran Norton Anti-Virus, found nothing.
I ran Hijack This, a program to see what program files are being used.
I ran HITMAN PRO. Found nothing.
I ran firmware updates for my router, is was up to date.
I changed the settings to WEP after, to see if it was the router.
I checked all my other computers to see if it was the internet, it is not the ISP.
I also changed the network name, so the interference with temporary files, wouldn't interfere.
I used other browsers, and had the same problem.
Some websites would load halfway, and need a refresh.
I have not opened the desktop.
I tried exchanging the Belkin Wireless N Adapter, I had an older one I bought before, and when I plug it in, it doesn't recognize the device.
I re-plugged the new one in the USB port, and it worked for a few minutes before returning to the same errors of Internet Server Not Found.
I am confused, because it's not the Wireless N Adapter. My browser, my ISP, my router, my USB port, because the other's work and so does this one.
My reformat didn't work, and I experience this problem everyday, but now downloading files doesn't work even when all other web pages load. This means, there is something wrong with my hardware. Because the other browsers won't download either.
I'm also using my laptop right now, to make this post, so my internet on all my other computers works fine.
I'm interested if there is a problem with the hardware when I bought the computer, because there is no real fix for this problem. Each time I get on the phone with TECH SUPPORT, they ask if it's working. And sometimes it does, but then after a few hours it goes back to the same errors. I can't keep calling Tech Support, telling them it's not working when it starts working randomly, then going back to the same errors. Please help!
Also, TECH SUPPORT ignored my monitor problem. They didn't say anything about how to fix this problem. I hate having to turn off the monitor and turn it back on because this is a brand new computer. I still have the receipt, warranty and I'm tired of explaining the problem to different people from TECH SUPPORT.
Also, my audio jack in the front doesn't work.

Hi,
Did you burn a set of the HP Recovery Disks? You mentioned that the reformat failed. Is that correct? Did you try a full HP Recovery? If not, then backup your data to external media. Boot up to the HP Blue screen and first try diagnostics and see how that goes. If that is successful, then boot again up to the HP blue screen and try Recovery.
If you don't have a set of the HP Recovery Disks and the Recovery process fails from the HP blue screen then you need to order a set of the HP Recovery Disks from HP. HP Recovery Disks.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

I have audio trouble,right output not working

I have an Iphone 4s..
At first i thought that my headphone jack is not working good,because the left earphone is working and the right one isn't,when i jack it in...
I tryied many headphones just to make shore that it's not something else,but after many tries i realised that the jack is out..
and this evening i went to iStyle to try some Audio Docks,and when i put the phone on it it does play music,but only on the left speaker...
I thought maybe it's the dock,but then i tried three more and it was the same on all of them.. only the left one was working..And now i would like to know please what could be the trouble,and how can i solve it?
Thank you!
PS: the problem with the jack was there even before i updated to 7.0....

Well it sounds like a hardwrae issue to me but you could troubleshoot the software
Reset the phone first by holding the power button and the home button until it shuts down then turn it back on and try again.
If it persists then backup your phone to iTunes and set it up as new.
If it still happens then it is a hardware issue, and you will need service.
If it does NOT happen when you set up as new, then restore from your backup. if the issue comes back then there is something wrong with your backup and you need to set it up as new again and start from scratch.

Audio Line-In Port Not Working

I plugged a Shure mic into the Audio-In Port and is doesn't work. I'm using FCP Voice-Over but I get no audio on Soundtrack either. Worked with all the settings and preferences for audio. Also tested a second mic which also doesn't work. I read some people had problems with Audio-In Port after upgrading to 10.4.10. I ran a check for audio updates, there are none that I haven't installed. Why can't I seem to make a simple mic work when it's been so simple previously?

Your Mac does not have a microphone input, only a line-level input (in fact, no Mac has included a microphone input in quite a while). So you'll need 1) a self-powered microphone that outputs line level, 2) a USB microphone, or 3) an external audio device that supports microphone inputs, either a mixer that will give you line-level output or a USB audio input device. One possibility for a USB device that works for many people and that is relatively inexpensive (ca $40.00 US) is the Griffin iMic. It works with any standard personal computer microphone.

M-Audio MIDISPORT UNO USB Not Working With Snow Leopard

My Snow Leopard installation worked fine except until I plugged in my MacBook to my Casio Privia with the M=Audio MIDISPORT UNO USB cable to run GarageBand. I'm getting a MIDI error which states it can't work with the latest operating system. It doesn't surprise me though for all the software and hardware driver updates that have to catch up to such a new OSX 10.6. I went to the M-Audio site to download the latest driver, but the drivers only were compatible with OSX10.5.8.
This is an alert at the site
Mac OS X 10.6 Snow Leopard Support Coming Soon
Avid/M-Audio working closely with Apple to offer support for OS X 10.6
Avid/M-Audio is pleased to hear that Apple has released Mac OS X 10.6 Snow Leopard. We’ve been working closely with Apple to bring Snow Leopard support to the M-Audio® product line, as well as the Pro Tools® product line and extended product families. We ask that all existing Mac users please wait to upgrade until we officially announce Snow Leopard support. Stay tuned for more information in the coming weeks.
This is a bit of a concern, because I need to get GarageBand running again with the MIDI hook ups. Is there a work around anyone knows about to get MIDI working with Snow Leopard.
Thanks Steve

I ran into a similar problem. I discovered one thing which may help you out though. It works OK with my Yamaha P200 keyboard but it does not work with my Yamaha NP30 keyboard. I looked at the MIDI stream and the only difference seems to be that the NP30 sends a continuous stream of MIDI clock, whereas the P200 does not. My theory is that this clock stream is somehow confusing the driver. I can't seem to disable the MIDI clock on my NP30 but if your Privia has the ability to disable MIDI clock, then it may be worth a try as it will probably fix the problem until they come out with the proper drivers.

DTS (5.1) Audio Through Airport Express: Not Working

I imported some DTS-encoded WAV files into iTunes, to stream to my audio system via an Airport Express. The AE is connected to the preamp via optical, the WAV files were not converted or modified in any way, and the volume is @ 100% in iTunes.
The preamp receives the files and the DTS icon lights up, so all seems to be good... except the audio output is 2.0 only. As a test I converted the files to Apple Lossless (since I know the AE has to make that conversion), same result.
As another test I turned down the volume in iTunes and the audio became white noise, another indication that the files are DTS.
If I burn an audio CD using iTunes and the same WAV files, and play them on my OPPO player I get 5.1, the final and conclusive proof that the files are properly encoded.
I know I've read that streaming DTS-encoded audio via the Airport Express is possible, so I'm not sure what I might be doing wrong.
Any ideas?

Hi,
I experienced some DTS files in iTunes, with my AirPort Express some months ago, it was working fine on my Marantz receiver. A few days ago I wanted to listen to them again, only white noise... I wanted to rip by myself a DTS-CD, therefore I found this out. Apparently since AirTunes has been turned to AirPlay, it's not working anymore (?) / the same way.

Album Art Screensaver does not work after iTunes 9 upgrade

After I upgraded to iTunes 9 my album art screensaver no longer works. I get the message saying "Your iTunes library does not contain any songs with artwork". I have tried deleting the plist files per another support topic, but this doesn't fix the problem. Ideas?

This is the Tiger forum - you are running Snow Leopard!
But I would suggest you post your question in the iTunes forum:
http://discussions.apple.com/forum.jspa?forumID=789

Satellite P745 Audio Jack / Headphone jack not working

Good day to all,
I have recently performed a fresh install of Windows 7 Ultimate on my Toshiba Satellite P745, and manually installed only important drivers (NVDIA and Intel Graphics, Realtek HD Audio Manager, etc.). I do not prefer the built-in restore factory settings of Toshiba, because I have tried using that before and it only degraded the performance of my laptop. I am using an external speaker instead of the built-in speakers of my laptop, because my harman/kardon is already broken, and after installing Windows 7, everything is working. 3 days after the installation, I cannot hear anything anymore from my external speaker. I tried reinstalling the Realtek HD Audio Manager (its version is 6.0.1.6305), but it still did not work. I tried as well to use other versions of the driver such as 6.01.7368, still it did not work. Lastly, I tried to perform system restore to the date when my speakers were still working, but it did not help at all.
I was also able to verify that my external speaker is not broken, because I was able to use it on my personal desktop, and alternative OS for my laptop which is Ubuntu 14.04.
I would greatly appreciate any help.
I've read on some queries posted here that people are asking for the id of the driver for some reason.
Here is mine:
HDAUDIO\FUNC_01&VEN_10EC&DEV_0269&SUBSYS_1179FC88&REV_1001
HDAUDIO\FUNC_01&VEN_10EC&DEV_0269&SUBSYS_1179FC88
Thank you to those who will help!

Hashtanksale,
Not sure about Win 7 ,however, I had a similiar problem with Win 8.1. I wanted to upgrade from a Gateway netbook running XP. I bought a HP x2-k010nr running 8.1 from OfficeMax and it stopped working,died, after 8 hours. Well took it back and exchanged it for another HP x2-k010nr and it lasted two days. The software would listen to the external combo jack mic, however, mostly to the internal mic. Exchanged it for an Asus Transformer and it lasted two days and had the same problem. Returned it and got a full refund. Seems there is a conflict between Microsoft and their vendors. If possible return your machine ASAP and wait for this issure to be resolved.
Ham123

HT2494 my Audio in port is not working

I have opened Apple preferences. and set audio in to line in, not getting a meter reading, But if set to mic, I get a good meter level?
I think, maybe my line in is not working ?

Reset PRAM. http://support.apple.com/kb/PH4405
Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
Best.

Audio from motion file not working in DVDSP

I created a DVD menu in motion. There is a 4 second intro, and then the music begins. I have set the loop to happen after the 4 second intro, and it is working properly in DVDSP, however the audio is not working. In the manual it says that "If you assign a video asset to the menu’s background by dragging it to the Menu Editor, DVD Studio Pro can automatically assign its companion audio file to the menu" pg. 279. I check the track preferences and it is set to find matching audio when dragging, so I don't know why the audio isn't working.

I think I resolved this! I had the same issues you have been having for a few months. I am actually running Vista. Here is what I did...
1. While booted to Windows I uninstalled boot camp
2. Re-installed boot camp from Leopard DVD
3. Installed boot camp update 2.1 (downloaded from Apple support, i know this is for XP only, but I updated anyway.)
4. Downloaded the realtek drivers (high definition audio codecs) from http://www.realtek.com.tw/downloads/
5. DO NOT use the Realtek installer to install the drivers...instead extract the contents to a folder.
6. Go to the device manager, locate the High Definition Audio device and updated the drivers from here (point to the folder where you extracted the drivers).
I now have sound out of the rear jack!! Hope this help someone
Regards,
Blaine

M-Audio Micro USB soundcard not working

I've recently got this audio card bundled with an M-Audio Keystudio 49.
It works flawlessly on Windows but on Linux it doesn't. I don't have any other things to try, I've tried configuring an /etc/modprobe.d/alsa.conf but it doesn't work. The snd-usb-audio module is loaded. Can anyone help me?
Here's some outputs:
lsusb
Bus 001 Device 003: ID 064e:a117 Suyin Corp.
Bus 002 Device 003: ID 05ac:1294 Apple, Inc. iPhone 3GS
Bus 003 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600
Bus 006 Device 004: ID 0763:201a Midiman M-Audio Micro
Bus 008 Device 006: ID 046d:c05f Logitech, Inc. M115 Optical Mouse
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
lsusb -v
Bus 006 Device 004: ID 0763:201a Midiman M-Audio Micro
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0763 Midiman
idProduct 0x201a M-Audio Micro
bcdDevice 0.08
iManufacturer 1 M-Audio
iProduct 2 M-Audio Micro
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 390
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 3 G7 2006/06/08 16:08
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 1 Audio
bInterfaceSubClass 1 Control Device
bInterfaceProtocol 0
iInterface 0
AudioControl Interface Descriptor:
bLength 10
bDescriptorType 36
bDescriptorSubtype 1 (HEADER)
bcdADC 1.00
wTotalLength 124
bInCollection 2
baInterfaceNr( 0) 1
baInterfaceNr( 1) 2
AudioControl Interface Descriptor:
bLength 12
bDescriptorType 36
bDescriptorSubtype 2 (INPUT_TERMINAL)
bTerminalID 10
wTerminalType 0x0201 Microphone
bAssocTerminal 0
bNrChannels 2
wChannelConfig 0x0003
Left Front (L)
Right Front (R)
iChannelNames 0
iTerminal 0
AudioControl Interface Descriptor:
bLength 12
bDescriptorType 36
bDescriptorSubtype 2 (INPUT_TERMINAL)
bTerminalID 11
wTerminalType 0x0603 Line Connector
bAssocTerminal 0
bNrChannels 2
wChannelConfig 0x0003
Left Front (L)
Right Front (R)
iChannelNames 0
iTerminal 0
AudioControl Interface Descriptor:
bLength 12
bDescriptorType 36
bDescriptorSubtype 2 (INPUT_TERMINAL)
bTerminalID 12
wTerminalType 0x0101 USB Streaming
bAssocTerminal 0
bNrChannels 2
wChannelConfig 0x0003
Left Front (L)
Right Front (R)
iChannelNames 0
iTerminal 0
AudioControl Interface Descriptor:
bLength 13
bDescriptorType 36
bDescriptorSubtype 6 (FEATURE_UNIT)
bUnitID 2
bSourceID 10
bControlSize 2
bmaControls( 0) 0x02
bmaControls( 0) 0x00
Volume Control
bmaControls( 1) 0x00
bmaControls( 1) 0x00
bmaControls( 2) 0x00
bmaControls( 2) 0x00
iFeature 0
AudioControl Interface Descriptor:
bLength 13
bDescriptorType 36
bDescriptorSubtype 6 (FEATURE_UNIT)
bUnitID 3
bSourceID 11
bControlSize 2
bmaControls( 0) 0x02
bmaControls( 0) 0x00
Volume Control
bmaControls( 1) 0x00
bmaControls( 1) 0x00
bmaControls( 2) 0x00
bmaControls( 2) 0x00
iFeature 0
AudioControl Interface Descriptor:
bLength 8
bDescriptorType 36
bDescriptorSubtype 5 (SELECTOR_UNIT)
bUnitID 7
bNrInPins 2
baSource( 0) 2
baSource( 1) 3
iSelector 0
AudioControl Interface Descriptor:
bLength 13
bDescriptorType 36
bDescriptorSubtype 6 (FEATURE_UNIT)
bUnitID 1
bSourceID 12
bControlSize 2
bmaControls( 0) 0x55
bmaControls( 0) 0x01
Mute Control
Bass Control
Treble Control
Automatic Gain Control
Bass Boost Control
bmaControls( 1) 0x02
bmaControls( 1) 0x00
Volume Control
bmaControls( 2) 0x02
bmaControls( 2) 0x00
Volume Control
iFeature 0
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 3 (OUTPUT_TERMINAL)
bTerminalID 20
wTerminalType 0x0301 Speaker
bAssocTerminal 0
bSourceID 1
iTerminal 0
AudioControl Interface Descriptor:
bLength 13
bDescriptorType 36
bDescriptorSubtype 6 (FEATURE_UNIT)
bUnitID 6
bSourceID 7
bControlSize 2
bmaControls( 0) 0x03
bmaControls( 0) 0x00
Mute Control
Volume Control
bmaControls( 1) 0x00
bmaControls( 1) 0x00
bmaControls( 2) 0x00
bmaControls( 2) 0x00
iFeature 0
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 3 (OUTPUT_TERMINAL)
bTerminalID 13
wTerminalType 0x0101 USB Streaming
bAssocTerminal 0
bSourceID 6
iTerminal 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 12
bDelay 0 frames
wFormatTag 1 PCM
AudioStreaming Interface Descriptor:
bLength 14
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 1
bSubframeSize 2
bBitResolution 16
bSamFreqType 0 Continuous
tLowerSamFreq 6400
tUpperSamFreq 48000
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 9
Transfer Type Isochronous
Synch Type Adaptive
Usage Type Data
wMaxPacketSize 0x0064 1x 100 bytes
bInterval 1
bRefresh 0
bSynchAddress 0
AudioControl Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x01
Sampling Frequency
bLockDelayUnits 2 Decoded PCM samples
wLockDelay 1 Decoded PCM samples
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 12
bDelay 0 frames
wFormatTag 1 PCM
AudioStreaming Interface Descriptor:
bLength 14
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 2
bSubframeSize 2
bBitResolution 16
bSamFreqType 0 Continuous
tLowerSamFreq 6400
tUpperSamFreq 48000
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 9
Transfer Type Isochronous
Synch Type Adaptive
Usage Type Data
wMaxPacketSize 0x00c8 1x 200 bytes
bInterval 1
bRefresh 0
bSynchAddress 0
AudioControl Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x01
Sampling Frequency
bLockDelayUnits 2 Decoded PCM samples
wLockDelay 1 Decoded PCM samples
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 13
bDelay 0 frames
wFormatTag 1 PCM
AudioStreaming Interface Descriptor:
bLength 14
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 1
bSubframeSize 1
bBitResolution 8
bSamFreqType 0 Continuous
tLowerSamFreq 6400
tUpperSamFreq 48000
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 9
Transfer Type Isochronous
Synch Type Adaptive
Usage Type Data
wMaxPacketSize 0x0032 1x 50 bytes
bInterval 1
bRefresh 0
bSynchAddress 0
AudioControl Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x01
Sampling Frequency
bLockDelayUnits 2 Decoded PCM samples
wLockDelay 1 Decoded PCM samples
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 2
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 13
bDelay 0 frames
wFormatTag 1 PCM
AudioStreaming Interface Descriptor:
bLength 14
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 1
bSubframeSize 2
bBitResolution 16
bSamFreqType 0 Continuous
tLowerSamFreq 6400
tUpperSamFreq 48000
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 9
Transfer Type Isochronous
Synch Type Adaptive
Usage Type Data
wMaxPacketSize 0x0064 1x 100 bytes
bInterval 1
bRefresh 0
bSynchAddress 0
AudioControl Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x01
Sampling Frequency
bLockDelayUnits 2 Decoded PCM samples
wLockDelay 1 Decoded PCM samples
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 3
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 13
bDelay 0 frames
wFormatTag 1 PCM
AudioStreaming Interface Descriptor:
bLength 14
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 2
bSubframeSize 2
bBitResolution 16
bSamFreqType 0 Continuous
tLowerSamFreq 6400
tUpperSamFreq 48000
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 9
Transfer Type Isochronous
Synch Type Adaptive
Usage Type Data
wMaxPacketSize 0x00c8 1x 200 bytes
bInterval 1
bRefresh 0
bSynchAddress 0
AudioControl Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x01
Sampling Frequency
bLockDelayUnits 2 Decoded PCM samples
wLockDelay 1 Decoded PCM samples
Device Status: 0x0000
(Bus Powered)
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
/etc/modprobe.d/alsa.conf
options snd-usb-audio index=-2
alias snd-card-0 snd-hda-intel
alias snd-card-1 snd-usb-audio
options snd-hda-intel index=0 model=acer
# ID 0763:201a Midiman M-Audio Micro
options snd-usb-audio index=1 vid=0x0763 pid=0x201a
Last edited by Gianfrix (2012-12-18 15:56:05)

I even tried on a fresh install and aplay -l shows the exact same output of my first post here...
Anyways the udev rules it installs are:
# madfuload.rules - udev rules for loading firmware into M-Audio DFU devices
# Audiophile
ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="0763", ATTR{idProduct}=="2803", RUN+="/usr/sbin/madfuload -l -n -f /usr/share/usb/maudio/ma003101.bin -D $env{DEVNAME}"
# MobilePre
ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="0763", ATTR{idProduct}=="2804", RUN+="/usr/sbin/madfuload -l -3 -f /usr/share/usb/maudio/ma004103.bin -D $env{DEVNAME}"
# Sonica
ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="0763", ATTR{idProduct}=="2805", RUN+="/usr/sbin/madfuload -l -n -f /usr/share/usb/maudio/ma005101.bin -D $env{DEVNAME}"
# Transit
ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="0763", ATTR{idProduct}=="2806", RUN+="/usr/sbin/madfuload -l -3 -f /usr/share/usb/maudio/ma006100.bin -D $env{DEVNAME}"
# Ozone
ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="0763", ATTR{idProduct}=="2808", RUN+="/usr/sbin/madfuload -l -3 -f /usr/share/usb/maudio/ma008100.bin -D $env{DEVNAME}"
While the id on my card is 0763:201a, and it does not match any rule here

Audio Hijack & Screensaver(s) [Not Working]

Similar Messages

Maybe you are looking for