Audio Host Missing
Hi,
the host audio is missing in our recordings, the participants audio is on but Host audio is off.
The host audio is missing in a point of recording meeting.
The problem is only in the recording, in a meeting we don't have audio problems.
Thanks
Was your meeting host on computer running Windows 8.1? We see recordings with missing audio and video (when it was present and fine during the live meeting) all the time. The meeting hosts with the missing A/V always seem to be on Windows 8.1. These recordings can typically be fixed using JAYDEEP's Recording Repair Assistant, but it's quite a hassle to fix many of these each week.
In September 2014, we also reported to Adobe Support an intermittent issue where the screenshare from a Windows 8.1 computer occasionally freezes for the remote Connect participants. If this issue is not resolved during the live meeting (by the Host exiting the meeting, rejoining, and sharing his screen again), it isn't possible to fix the recording to restore the screenshare. Adobe acknowledged this issue and told us it will be fixed in 9.3 (not), 9.4 (not), and now 9.5.
I don't know how anyone uses Adobe Connect from a Windows 8.1 computer. More importantly, I can't imagine how Adobe can afford to take almost a year to resolve an issue with such a popular client operating system.
Similar Messages
-
Audio Filter missing: Internal Volume Stereo - corrupt project?
Hi,
I am getting this error when I open my project. In addition, no media will play in the project either in the sequence window or the source window.
It all appears and will scrub (with no audio), but will not play.
I dug around a bit and I found that there is a known bug with audio from XML's and that is what I am using (convinced my client to migrate from FCP to Premiere - please don't tell me I made a mistake).
Everything worked brilliantly for a week, including the addition of audio filters, and then all of a sudden - bang. No more.
I have painstakingly deleted every audio filter and I am still getting this error. I have also tried a re-install.
Another oddity is that when I try to quit Premiere, it will not quit all the way without a force quit!
I'm running CC 2014 on a brand new mac pro.
Desperate,
dwSteve and Bill,
I follow your advice, but it did not solve the problem. It is true that problems began when I used ZOOM recorder at 98kHz/24 bit in my current project (I already changed ZOOM mode to 48kHz/16 bit), but could this be just a coincidence?
In the meantime I checked the rest of my 16 projects (.prel), which were fine before. To my surprise I found that although all of them were made using EXACTLY the same method, some of them are still OK, but most I can not Playback. The messages appearing are of three types:
1. "Audio Filter missing: Internal Balance".
2. "Audio Filter missing: Internal Volume Stereo".
3. "This type of file is not supported or required codec is not installed".
In one case, when I opened a project the first time, the message was "This type of file is not supported or required codec is not installed", but when I opened it second time it said " Audio Filter missing:Internal Volume Stereo". It seems to be random.
Some projects can be opened, but when I try to Playback there is no sound.
I am completly lost. Please help.
Andrew -
PPro CS4 - half of audio is missing from exported files
Hi all.
I'm currently working on a project in PPro CS4, and by that I mean that I've already completed the project. It was exported and uploaded to youtube for my boss, no problems. Then he asked me to combine the two videos, so I copied the second half of the video and pasted it onto the first half's sequence. The settings I used for the two sequences were the same. When I play the video in PPro everything works fine. When I export the video, however, the audio is missing from the second half of the video (the half I copied). The second half audio is on the same track as the first half of the audio, so the audio levels on the exported video should be exactly the same.
I've been browsing the forums and looking at troubleshooting pages but I still haven't found a solution to the problem. The video is intact; only the second half of the audio is missing. I have no idea why it's doing this or how to fix it.
I'd appreciate any input.
-RDYes, if he is exporting one file of video and audio then either the entire track is exported
or only the work area bar is exported for both video and audio. If he is exporting video and audio separately THEN they might be different lengths.
You might right-click the audio for the second section and select Audio to see if it is muted.
Try exporting the audio alone without video, listen to the audio in Windows Medica player and listen if all or only half of it exported. If all of it exported, then that narrows the problem.
You might try creating a new Sequence and pasting the video and audio into the new Sequence (don't just duplicate the sequence, that may just duplicate the problem). Then export and see if that circumvented the problem.
What format are you exporting to? -
Audio file missing from MOV when exported as a quicktime movie.
Using Keynote 9, I imported video into presentation that was edited in iMovie 9. When I export the presentation to quicktime movie the audio is missing from the video file. The audio file plays fine in the standard keynote presentation mode.
This is STRICTLY a work around! Official fix will come from Apple as an update more than likely.
Duplicate item first (File > Duplicate). On newly duplicated project change file association type (File > get info). Under name and extension section take out .key). Close Get Info and save with removing .key. Double click to open the file (now a compression). Open uncompressed folder (same name as original file, now shows as a folder). Now in the Data folder find a .mov file named "Recording" with randomly generated letters and numbers behind it. Drag .mov file to desktop or any other directory. Open extracted .mov file with QuickTime to verify integrity. Save as audio file only. Get Info on file again and place .key value at end of file/extension for project. Open project. Under Play menu option delete the recording. Under Audio inspector drag the .mov of audio only to recording back in. Test play project to see if its accurate. Export to QuickTime and see if issue is resolved.
If issue persists:
Export with corrupted audio as QuickTime. Separate the audio from video track. Delete audio. Import the extracted .mov audio file. Share > File. Enjoy. -
Oc4j-island:default_island, ajp-host:-missing-, ajp-port:-missing
I installed oracle report server 10.1.2.02
I tried the following url and it display the page properly that ask Test run Job:
http://xxx/reports/rwwebservice?operation=runJob
When I tried the url:
http://xxx/reports/rwservlet/showJobs?server=rep_xxx_oracleas3
It is suppose to redirect me to an url to login.
It did the first time. I was able to login using the id:orcladmin.
It gave me the page Report Server Queue Status.
Please note, my oracle report server is installed on windows 2000 SP4 in a vmware guest operating system workstation 6.5.1. I have internet connection in my guest operating system and I am trying the url inside
the guesting operating system.
But after I restart the operating system when I tried the url http://xxx/reports/rwservlet/showJobs?server=rep_xxx_oracleas3, it try to redirect me to the login page:
New url:
http://xxx:7777/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=v1.4~E5DE4992~5CFF563A653986204B9B04019AE4D129CF0BB1A298D032A11FDF68ACD637E48672F62C4B6E8A048E4C55BFBB01AF2F93CB1065AE73753291E19C8CF7FCD1DDF1D52C1D525F9A107176E14356A4815260A8B856690E26B59ACCD09C6A1DB666807227D7870A4D15DFD9CBA473EAEF0F0001B8A44C8B683138B240C6A8CC44D730DB090B330C1057E39715ECC56E5395B6F89EDC185287720F00DECCF03E796F20470A1732CB419AF416475AFCA066946B655BA5CD8425CC4BD478FA2BCF44AC58
But I get the following error on the page.
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server Server at xxx Port 7777Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server Server at xxx Port 7777
More information about this error may be available in the server error log.
Here is the contents of my apache server log
C:\OraHome_3\Apache\Apache\logs\error_log.1249732800:
[Sat Aug 08 09:47:38 2009] [error] [client 192.168.2.136] [ecid: 1249739258:192.168.2.136:2768:3016:1,0] MOD_OC4J_0013: Failed to call destination: OC4J_BI_Forms's service() to service the request.
[Sat Aug 08 09:47:50 2009] [error] MOD_OC4J_0191: Missing information from OC4J notification. ias-cluster:C_192.168.2.136.910040.121a94bcb04.-8000, ias-instance:jadeite1000.xxx, hostname:xxx, opmnid:18677962, oc4j-instance:home, oc4j-island:default_island, ajp-host:-missing-, ajp-port:-missing-
C:\OraHome_3\j2ee\home\log\home_default_island_1\server.txt
09/08/08 10:10:47 Published an event: C_192.168.2.136.910040.121a94bcb04.-8000#jadeite1000.xxx#18677962#D#home#default_island&xxx&HTTP:xxx#12503&RMI:xxx#12403&JMS:xxx#12603
How can I tell what version of Oracle report server did I installed. Is there a command I can run to give me feedback what version of oracle report server.
I went to the following url:
//xxx/reports/rwservlet/showJobs?server=rep_xxx_oracleas3
and it redirects to a login page.
But when I tried to login using the id:orcladmin it tells me the password for the id has expired. So I login into the userid ORASSO.
And ran the following command:
execute WWSSO_OID_INTEGRATION.reset_passwd('ORCLADMIN',null,'mychau1');
Than I was able to login using the id:ORCLADMIN.
Before I did this change of the orcladmin 's password.
When I run the opmnctl status, I get the following:
C:\OraHome_3\opmn\bin>opmnctl status
Processes in Instance: jadeite1000.xxx
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
OC4J | home | 0 | NONE
OC4J | OC4J_BI_Forms | 0 | NONE
WebCache | WebCache | 1948 | Alive
WebCache | WebCacheAdmin | 1696 | Alive
HTTP_Server | HTTP_Server | 980 | Alive
After the change of the password for the id:orcladmin and after rebooting the computer, I get the following:
C:\OraHome_3\opmn\bin>opmnctl status
Processes in Instance: jadeite1000.xxx
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
OC4J | home | 4048 | Alive
OC4J | OC4J_BI_Forms | 784 | Alive
WebCache | WebCache | 2020 | Alive
WebCache | WebCacheAdmin | 2012 | Alive
HTTP_Server | HTTP_Server | 2048 | Alive
Basically HOME AND OC4J_BI_FORMS ARE NOW BOTH ALIVE AND BEFORE THEY WERE NOT ALIVE.
I also did comparison of the original and new ias.properties and the opmn.xml file and it shows no change.
This means that since HOME and OC4J_BI_FORMS ARE NOW BOTH ALIVE AND because of that I cannot get into the login page.
//xxx:7777/sso/jsp/login.jsp?
Here is the contents of my apache server log
C:\OraHome_3\Apache\Apache\logs\error_log.1249732800:
[Sat Aug 08 09:47:38 2009] [error] [client 192.168.2.136] [ecid: 1249739258:192.168.2.136:2768:3016:1,0] MOD_OC4J_0013: Failed to call destination: OC4J_BI_Forms's service() to service the request.
[Sat Aug 08 09:47:50 2009] [error] MOD_OC4J_0191: Missing information from OC4J notification. ias-cluster:C_192.168.2.136.910040.121a94bcb04.-8000, ias-instance:jadeite1000.xxx, hostname:xxx, opmnid:18677962, oc4j-instance:home, oc4j-island:default_island, ajp-host:-missing-, ajp-port:-missing-
Does this mean the port for
OC4J | home | 4048 | Alive
OC4J | OC4J_BI_Forms | 784 | Alive
conflict with some server. Example maybe with the apache server or the oc4j application server.
If so, where can I find the port number used by the apache or oc4j application server.
Here is a a small detail of the C:\OraHome_3\opmn\conf\opmn.xml
<ias-component id="OC4J">
<dependencies>
<OID infrastructure="true"/>
</dependencies>
<process-type id="home" module-id="OC4J" status="enabled">
<module-data>
<category id="start-parameters">
<data id="java-options" value="-Xrs -server -Djava.security.policy=$ORACLE_HOME/j2ee/home/config/java2.policy -Djava.awt.headless=true"/>
</category>
<category id="stop-parameters">
<data id="java-options" value="-Djava.security.policy=$ORACLE_HOME/j2ee/home/config/java2.policy -Djava.awt.headless=true"/>
</category>
</module-data>
<start timeout="600" retry="2"/>
<stop timeout="120"/>
<restart timeout="720" retry="2"/>
<port id="ajp" range="12501-12600"/>
<port id="rmi" range="12401-12500"/>
<port id="jms" range="12601-12700"/>
<process-set id="default_island" numprocs="1"/>
</process-type>
<process-type id="OC4J_BI_Forms" module-id="OC4J">
<environment>
<variable id="DISPLAY" value="localhost:0"/>
<variable id="LD_LIBRARY_PATH" value="C:\OraHome_3\lib32:C:\OraHome_3\lib:C:\OraHome_3\jdk\jre\lib\sparc"/>
</environment>
<module-data>
<category id="start-parameters">
<data id="java-options" value="-server -Xrs -Djava.security.policy=C:\OraHome_3\j2ee\OC4J_BI_Forms\config\java2.policy -Djava.awt.headless=true -Xmx512M -Xms128M "/>
<data id="oc4j-options" value="-properties -userThreads "/>
</category>
<category id="stop-parameters">
<data id="java-options" value="-Djava.security.policy=C:\OraHome_3\j2ee\OC4J_BI_Forms\config\java2.policy -Djava.awt.headless=true"/>
</category>
<category id="urlping-parameters">
<data id="/reports/rwservlet/pingserver?start=auto" value="200"/>
</category>
</module-data>
<start timeout="900" retry="2"/>
<stop timeout="120"/>
<restart timeout="720" retry="2"/>
<port id="ajp" range="12501-12600"/>
<port id="rmi" range="12401-12500"/>
<port id="jms" range="12601-12700"/>
<process-set id="default_island" numprocs="1"/>
</process-type>
</ias-component>
Here is small detail of my C:\OraHome_3\config\ias.properties:
Version=10.1.2.0.2
InstallType=Business
Components=Apache,J2EE,WebCache,JServ,Portal,Wireless,Discoverer,Personalization,Reports,Forms
IASname=jadeite1000.xxx
InstanceNamesList=jadeite1000.xxx
IASpassword=054f9a3f737c07b9aaf21c08faf054b3296933e30edcbaa752
IASSvcpassword=051e39b076c2b7e24f97428fb001c5c752b316f1d391863b18
UserName=Administrator
InfrastructureUse=true
DatabaseManagedClusterSupport=true
OIDhost=xxx
OIDport=389
OIDsslport=636
On another forum someone posted this reply to my question:
"I support Oracle Application Server. I'm not exactly sure where your problem is but you might want to check if there's a ajp port conflict. You can find your ajp port setting at $OH/opmn/config/opmn.xml. Search for ajp. Then check if your box is using that port or just try another port number and restart your app srv.
Sat Aug 08 09:47:50 2009] [error] MOD_OC4J_0191: Missing information from OC4J notification. ias-cluster:C_192.168.2.136.910040.121a94bcb04.-8000, ias-instance:jadeite1000.xxx, hostname:xxx, opmnid:18677962, oc4j-instance:home, oc4j-island:default_island, ajp-host:-missing-, ajp-port:-missing-
MOD_OC4J_0191
If OracleAS 10.1.3 has been integrated with OracleAS 10.1.2 the OPMN / ONS will invoke a ping request via the 10.1.2 HTTP Server to check on the availability of the 10.1.3 OC4J instances. The ping request will only succeed if the default-web-site protocol is set to ajp.
The error - MOD_OC4J_0191 - occurs because the OracleAS 10.1.3 default instance - typically labelled Home - has default-web-site protocol set to HTTP. The Home OC4J instance by default has this protocol set to be HTTP as it is this instance which typically hosts the OracleAS 10.1.3 ascontrol application. The error is harmless and can be ignored.
Also,
Try this:
Edit your $OH/opmn/conf/opmn.xml (Just change the protocol from http to ajp
from
<port id="default-web-site" range="7777" protocol="http"/>
To
<port id="default-web-site" range="12601-12700" protocol="ajp"/>
Run the update config for command for opmn.xml if you're not using the asconsole.
You can find your version number defined in the $OH/config/ias.properties set in the Version variable.
Always take a backup before making changes. You won't regret it.
Good luck."
In the reply " Then check if your box is using that port or just try another port number and restart your app srv."
How can I check what port number is my box using?
In the reply "If OracleAS 10.1.3 has been integrated with OracleAS 10.1.2 the OPMN / ONS will invoke a ping request via the 10.1.2 HTTP Server to check on the availability of the 10.1.3 OC4J instances. The ping request will only succeed if the default-web-site protocol is set to ajp."
How do I ping a request via the 10.1.2 HTTP server to check on the avilability of the 10.1.3 OC4J instances?
I checked my opmn.xml file I cannot find this tag:
<port id="default-web-site" range="7777" protocol="http"/>
Can you please tell me which url and where can I login in with Oracle support.
Thank you for your help!!! Greatly appreciated it!!! Any hint would be great.
Yours,
Frustrated.
Yours,
Frustrated.I installed oracle report server 10.1.2.02
I tried the following url and it display the page properly that ask Test run Job:
http://xxx/reports/rwwebservice?operation=runJob
When I tried the url:
http://xxx/reports/rwservlet/showJobs?server=rep_xxx_oracleas3
It is suppose to redirect me to an url to login.
It did the first time. I was able to login using the id:orcladmin.
It gave me the page Report Server Queue Status.
Please note, my oracle report server is installed on windows 2000 SP4 in a vmware guest operating system workstation 6.5.1. I have internet connection in my guest operating system and I am trying the url inside
the guesting operating system.
But after I restart the operating system when I tried the url http://xxx/reports/rwservlet/showJobs?server=rep_xxx_oracleas3, it try to redirect me to the login page:
New url:
http://xxx:7777/pls/orasso/orasso.wwsso_app_admin.ls_login?Site2pstoreToken=v1.4~E5DE4992~5CFF563A653986204B9B04019AE4D129CF0BB1A298D032A11FDF68ACD637E48672F62C4B6E8A048E4C55BFBB01AF2F93CB1065AE73753291E19C8CF7FCD1DDF1D52C1D525F9A107176E14356A4815260A8B856690E26B59ACCD09C6A1DB666807227D7870A4D15DFD9CBA473EAEF0F0001B8A44C8B683138B240C6A8CC44D730DB090B330C1057E39715ECC56E5395B6F89EDC185287720F00DECCF03E796F20470A1732CB419AF416475AFCA066946B655BA5CD8425CC4BD478FA2BCF44AC58
But I get the following error on the page.
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server Server at xxx Port 7777Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server Server at xxx Port 7777
More information about this error may be available in the server error log.
Here is the contents of my apache server log
C:\OraHome_3\Apache\Apache\logs\error_log.1249732800:
[Sat Aug 08 09:47:38 2009] [error] [client 192.168.2.136] [ecid: 1249739258:192.168.2.136:2768:3016:1,0] MOD_OC4J_0013: Failed to call destination: OC4J_BI_Forms's service() to service the request.
[Sat Aug 08 09:47:50 2009] [error] MOD_OC4J_0191: Missing information from OC4J notification. ias-cluster:C_192.168.2.136.910040.121a94bcb04.-8000, ias-instance:jadeite1000.xxx, hostname:xxx, opmnid:18677962, oc4j-instance:home, oc4j-island:default_island, ajp-host:-missing-, ajp-port:-missing-
C:\OraHome_3\j2ee\home\log\home_default_island_1\server.txt
09/08/08 10:10:47 Published an event: C_192.168.2.136.910040.121a94bcb04.-8000#jadeite1000.xxx#18677962#D#home#default_island&xxx&HTTP:xxx#12503&RMI:xxx#12403&JMS:xxx#12603
How can I tell what version of Oracle report server did I installed. Is there a command I can run to give me feedback what version of oracle report server.
I went to the following url:
//xxx/reports/rwservlet/showJobs?server=rep_xxx_oracleas3
and it redirects to a login page.
But when I tried to login using the id:orcladmin it tells me the password for the id has expired. So I login into the userid ORASSO.
And ran the following command:
execute WWSSO_OID_INTEGRATION.reset_passwd('ORCLADMIN',null,'mychau1');
Than I was able to login using the id:ORCLADMIN.
Before I did this change of the orcladmin 's password.
When I run the opmnctl status, I get the following:
C:\OraHome_3\opmn\bin>opmnctl status
Processes in Instance: jadeite1000.xxx
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
OC4J | home | 0 | NONE
OC4J | OC4J_BI_Forms | 0 | NONE
WebCache | WebCache | 1948 | Alive
WebCache | WebCacheAdmin | 1696 | Alive
HTTP_Server | HTTP_Server | 980 | Alive
After the change of the password for the id:orcladmin and after rebooting the computer, I get the following:
C:\OraHome_3\opmn\bin>opmnctl status
Processes in Instance: jadeite1000.xxx
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
OC4J | home | 4048 | Alive
OC4J | OC4J_BI_Forms | 784 | Alive
WebCache | WebCache | 2020 | Alive
WebCache | WebCacheAdmin | 2012 | Alive
HTTP_Server | HTTP_Server | 2048 | Alive
Basically HOME AND OC4J_BI_FORMS ARE NOW BOTH ALIVE AND BEFORE THEY WERE NOT ALIVE.
I also did comparison of the original and new ias.properties and the opmn.xml file and it shows no change.
This means that since HOME and OC4J_BI_FORMS ARE NOW BOTH ALIVE AND because of that I cannot get into the login page.
//xxx:7777/sso/jsp/login.jsp?
Here is the contents of my apache server log
C:\OraHome_3\Apache\Apache\logs\error_log.1249732800:
[Sat Aug 08 09:47:38 2009] [error] [client 192.168.2.136] [ecid: 1249739258:192.168.2.136:2768:3016:1,0] MOD_OC4J_0013: Failed to call destination: OC4J_BI_Forms's service() to service the request.
[Sat Aug 08 09:47:50 2009] [error] MOD_OC4J_0191: Missing information from OC4J notification. ias-cluster:C_192.168.2.136.910040.121a94bcb04.-8000, ias-instance:jadeite1000.xxx, hostname:xxx, opmnid:18677962, oc4j-instance:home, oc4j-island:default_island, ajp-host:-missing-, ajp-port:-missing-
Does this mean the port for
OC4J | home | 4048 | Alive
OC4J | OC4J_BI_Forms | 784 | Alive
conflict with some server. Example maybe with the apache server or the oc4j application server.
If so, where can I find the port number used by the apache or oc4j application server.
Here is a a small detail of the C:\OraHome_3\opmn\conf\opmn.xml
<ias-component id="OC4J">
<dependencies>
<OID infrastructure="true"/>
</dependencies>
<process-type id="home" module-id="OC4J" status="enabled">
<module-data>
<category id="start-parameters">
<data id="java-options" value="-Xrs -server -Djava.security.policy=$ORACLE_HOME/j2ee/home/config/java2.policy -Djava.awt.headless=true"/>
</category>
<category id="stop-parameters">
<data id="java-options" value="-Djava.security.policy=$ORACLE_HOME/j2ee/home/config/java2.policy -Djava.awt.headless=true"/>
</category>
</module-data>
<start timeout="600" retry="2"/>
<stop timeout="120"/>
<restart timeout="720" retry="2"/>
<port id="ajp" range="12501-12600"/>
<port id="rmi" range="12401-12500"/>
<port id="jms" range="12601-12700"/>
<process-set id="default_island" numprocs="1"/>
</process-type>
<process-type id="OC4J_BI_Forms" module-id="OC4J">
<environment>
<variable id="DISPLAY" value="localhost:0"/>
<variable id="LD_LIBRARY_PATH" value="C:\OraHome_3\lib32:C:\OraHome_3\lib:C:\OraHome_3\jdk\jre\lib\sparc"/>
</environment>
<module-data>
<category id="start-parameters">
<data id="java-options" value="-server -Xrs -Djava.security.policy=C:\OraHome_3\j2ee\OC4J_BI_Forms\config\java2.policy -Djava.awt.headless=true -Xmx512M -Xms128M "/>
<data id="oc4j-options" value="-properties -userThreads "/>
</category>
<category id="stop-parameters">
<data id="java-options" value="-Djava.security.policy=C:\OraHome_3\j2ee\OC4J_BI_Forms\config\java2.policy -Djava.awt.headless=true"/>
</category>
<category id="urlping-parameters">
<data id="/reports/rwservlet/pingserver?start=auto" value="200"/>
</category>
</module-data>
<start timeout="900" retry="2"/>
<stop timeout="120"/>
<restart timeout="720" retry="2"/>
<port id="ajp" range="12501-12600"/>
<port id="rmi" range="12401-12500"/>
<port id="jms" range="12601-12700"/>
<process-set id="default_island" numprocs="1"/>
</process-type>
</ias-component>
Here is small detail of my C:\OraHome_3\config\ias.properties:
Version=10.1.2.0.2
InstallType=Business
Components=Apache,J2EE,WebCache,JServ,Portal,Wireless,Discoverer,Personalization,Reports,Forms
IASname=jadeite1000.xxx
InstanceNamesList=jadeite1000.xxx
IASpassword=054f9a3f737c07b9aaf21c08faf054b3296933e30edcbaa752
IASSvcpassword=051e39b076c2b7e24f97428fb001c5c752b316f1d391863b18
UserName=Administrator
InfrastructureUse=true
DatabaseManagedClusterSupport=true
OIDhost=xxx
OIDport=389
OIDsslport=636
On another forum someone posted this reply to my question:
"I support Oracle Application Server. I'm not exactly sure where your problem is but you might want to check if there's a ajp port conflict. You can find your ajp port setting at $OH/opmn/config/opmn.xml. Search for ajp. Then check if your box is using that port or just try another port number and restart your app srv.
Sat Aug 08 09:47:50 2009] [error] MOD_OC4J_0191: Missing information from OC4J notification. ias-cluster:C_192.168.2.136.910040.121a94bcb04.-8000, ias-instance:jadeite1000.xxx, hostname:xxx, opmnid:18677962, oc4j-instance:home, oc4j-island:default_island, ajp-host:-missing-, ajp-port:-missing-
MOD_OC4J_0191
If OracleAS 10.1.3 has been integrated with OracleAS 10.1.2 the OPMN / ONS will invoke a ping request via the 10.1.2 HTTP Server to check on the availability of the 10.1.3 OC4J instances. The ping request will only succeed if the default-web-site protocol is set to ajp.
The error - MOD_OC4J_0191 - occurs because the OracleAS 10.1.3 default instance - typically labelled Home - has default-web-site protocol set to HTTP. The Home OC4J instance by default has this protocol set to be HTTP as it is this instance which typically hosts the OracleAS 10.1.3 ascontrol application. The error is harmless and can be ignored.
Also,
Try this:
Edit your $OH/opmn/conf/opmn.xml (Just change the protocol from http to ajp
from
<port id="default-web-site" range="7777" protocol="http"/>
To
<port id="default-web-site" range="12601-12700" protocol="ajp"/>
Run the update config for command for opmn.xml if you're not using the asconsole.
You can find your version number defined in the $OH/config/ias.properties set in the Version variable.
Always take a backup before making changes. You won't regret it.
Good luck."
In the reply " Then check if your box is using that port or just try another port number and restart your app srv."
How can I check what port number is my box using?
In the reply "If OracleAS 10.1.3 has been integrated with OracleAS 10.1.2 the OPMN / ONS will invoke a ping request via the 10.1.2 HTTP Server to check on the availability of the 10.1.3 OC4J instances. The ping request will only succeed if the default-web-site protocol is set to ajp."
How do I ping a request via the 10.1.2 HTTP server to check on the avilability of the 10.1.3 OC4J instances?
I checked my opmn.xml file I cannot find this tag:
<port id="default-web-site" range="7777" protocol="http"/>
Can you please tell me which url and where can I login in with Oracle support.
Thank you for your help!!! Greatly appreciated it!!! Any hint would be great.
Yours,
Frustrated.
Yours,
Frustrated. -
When importing clips to iMovie11 the audio is missing. I have been able to successfully to this in the past and all of the sudden it is not working. Any help to solve the problem would be appreciated.
Thank you for your help!Download/install an app is a know possible solution.
3. Install another app from the App Store
If all user-installed apps are not launching, it could be an Apple ID authorization issue. Download and install an app that isn't already installed on your device to reset this information.
Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
Above from Apple's :
iOS: Troubleshooting applications purchased from the App Store -
I have experienced a number of crashes (iMac OS 10.75) in my Premiere Pro project + the warning "Audio Filter missing: Internal Volume Mono" How do I resolve this? It seems to be a 'project' problem.
Thanks for your help.
Nola
Message was edited by: Nola SchiffI wish I could supply some help; I am having the same problem (newest version of Premiere Pro CC, just reinstalled in hopes of solving this problem, on a Macbook Pro i7 running 10.8.4 with 16GB RAM. It is rendering my project unusable. Help anyone?
-
Audio Filter missing: Internal Volume Mono
All of a sudden this error message started popping up
Audio Filter missing: 4:1635083896 1278365011 1802721110 Audio Filter missing: Internal Volume Mono
Also now my timeline is not working, some tracks are missing volume envelopes and when I scroll up and down it's all messed up and I can't do anything.
What's happening?
I tried re-installing the latest update CC 2014.1 but no go...
Help!!OH man, Im also having loads of other audio issues with this update. Clicks, pops, audio often mutes on it's own. No audio comes through and there's screeching huge noise...ng
Really disappointed with this! Im paying good money for the CC and today alone Ive spent 4 hours trying to figure out these massive issues.
Im using multiband compressor and EQ and the instant I add those to the timeline the troubles begin. -
Audio Filter missing:Internal volume stereo
I am unable to back play a Pre project I am working on in the moment. When I open it, there is a message as in the subject of this post (Audio Filter missing: Internal volume stereo). Can someone help please.
AndrewSteve and Bill,
I follow your advice, but it did not solve the problem. It is true that problems began when I used ZOOM recorder at 98kHz/24 bit in my current project (I already changed ZOOM mode to 48kHz/16 bit), but could this be just a coincidence?
In the meantime I checked the rest of my 16 projects (.prel), which were fine before. To my surprise I found that although all of them were made using EXACTLY the same method, some of them are still OK, but most I can not Playback. The messages appearing are of three types:
1. "Audio Filter missing: Internal Balance".
2. "Audio Filter missing: Internal Volume Stereo".
3. "This type of file is not supported or required codec is not installed".
In one case, when I opened a project the first time, the message was "This type of file is not supported or required codec is not installed", but when I opened it second time it said " Audio Filter missing:Internal Volume Stereo". It seems to be random.
Some projects can be opened, but when I try to Playback there is no sound.
I am completly lost. Please help.
Andrew -
A portion of the audio is missing on the end of clips?
Using Adobe Premiere Elements 7 a portion of the audio is missing on the end of clips after I bring it in. The files are motion JPEG AVI .
Welcome to the forum.
I do not recall seeing any issue with muxed MJPEG files, regarding truncated Audio. First, take a look at this ARTICLE on MJPEG files.
Next, all Audio files (muxed or elemental streams) must be Conformed, which converts them to 32 bit, floating point files for editing. If one does not allow the Conforming to complete 100%, the Audio can be truncated. See this ARTICLE.
Good luck,
Hunt -
I just purchased my firt MacBook and am having some trouble running Adobe. I'm trying to view an enhanced video presentation using Adobe Flash Player. I can see the slideshow, but the audio is missing. I've downloaded a recent flash player and reader but I get nothing. Any ideas?
If your computer is running Snow Leopard, and is not at 10.6.8, you could use
Software Update to get final Combo Update 10.6.8 v. 1.1 for Snow Leopard.
Aside from that (you may have already done so) here is a free-running
application that may help your line-in audio, by the name of LineIn
http://www.rogueamoeba.com/freebies/ and it suggests possibilities.
There also are USB input methods using those for audio; not sure what
is still available, a few great ones no longer were. One from Belkin a few
years ago, called the iMic, offered great options over USB.
Hopefully the free application can help.
Good luck & happy computing! -
IMovie: Some parts of audio is missing when export?
When I play it inside iMovie, it works.
But then when it is export, either to iTunes, YouTube or MP4 format,
some parts of the audio is missing.
What should I do?Looks like the 8.0.4 update to IPhoto may have broken its "share to iDVD" and Export functionality. There are a few Apple.com discussions on this topic.
I found that if I chose "Play each slide for a minimum of x seconds" and altered the duration of showing some slides, the audio would be missing when I exported the slideshow to iDVD.
However, using exactly the same music track from iTunes, if I chose the option to "Fit slideshow to music" then the audio worked perfectly when I exported to iDVD.
Dear Apple, can this please be fixed? -
Print to Video - Audio is missing
Hi guys,
I'm attempting to print/Copy to tape a standard mini dv project iv'e completed.
When checking what i recorded on the the tape through my camera, the audio is missing.
I have tested a separate project and printed to tape and the audio works fine.
This tells me something is prob set wrong on the project.
Any ideas what it could be? Anything i need to check?
Thanks,
MazTry trashing your preferences and reopen FCP, and set the "easy setup" to DV...
Jerry -
AVI files audio is missing in iPhoto library
Suddenly all my audio is missing from my avi files in my iPhoto library.
The only thing that has changed is I recently updated to the latest version of iMovie, which now
shows thumbnails of iPhoto video. It took about 30 minutes to generate the
thumbnails and since then the audio is gone. Anyone know what could have happened and what I can
do to restore the audio to my avi files? ThanksWhat version of Quicktime are you running? If you haven't update to QuickTime 7.5 updater and then try the movies again.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard. -
Beats audio software missing after I installed windows 8.1
Beats audio software missing after I installed windows 8.1
my laptop: HP pavilion p011svHi @Boukou ,
Thank you for your inquiry.
I understand that after updating to Windows 8.1 you no longer have the Beats Audio software.
You should be able to download an updated audio driver from HP Pavilion 15-p011sv Software & Drivers page .
This should reinstall your Beats software.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
Maybe you are looking for
-
Cant get on firefox to reset it so I can get online. What can I do to fix the problem
-
Safari doesn't open many websites
I discovered that Safari si unable to open quite few websites while IE can. Why Apple has this limitations, even with iChat, cannot be used with PC users for example. Is there a browser who can handle all sites ? Your suggestions welcome
-
Hi Experts Iam getting a problem in lsmw when i try to uplaod leave encashments to 0416 infotype,in the step read data iam getting following message. Transactions Read: 0 Records Read: 0 Transactions Written
-
just installed i works. want to fill out existing form. opens in pages and can not fill in form . Please help
-
My Mac shuts down when I close the lid. Why??
I want my screen/Mac to sleep, how do I do that? Heeelp!