Audio in Acrobat - embedded in each page, not as user triggered event?

Hi,
I'm an audio professional doing  voiceovers for a company.  The company wants to have audio that plays -  without a user trigger - on each page of the pdf training document.
Possible using scripting or  not??   I'm using Acrobat Pro 8 on a mac.
Thanks!

HI Shawn,
Was this message meant for me? if so, I too do not see it in
my Email, or any other Email from you - not even in my junk/spam
mail folder. If so, could you please Email me directly at
[email protected]? If it wasn't meant for me, then could someone
pick this issue up?
Thanks,
Ofer.

Similar Messages

  • Laserjet 6P won't stop printing - prints a line of junk on each page -not connected to network or PC

    My HP Laserjet 6P won't stop printing.  It prints a few lines of symbols and characters at the top of each page.  The printer is not connected to a network or computer.  I tried shutting the printer off for a long time.   This started when I tried printing from a MAC to the printer, but now there is nothing connected to the printer.
    Any suggestions for resetting, etc.?   I don't know how to reset this printer so I haven't tried anything with the various buttons, etc.

    Disable the "Enable bidirectional support" in the P1102w Properties > Ports.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • Repeat Group Header On Each Page not working

    Hi,
    I have a report that have 3 subreport, and in the Subreport, there is Group Headers that enabled the option "Repeat Group Header On Each Page". It works fine in the CR10 preview. However, the header won't repeat in the PDF generated by JRC.
    Any Idea?
    Thanks a lot!!

    Hi,
    Doesthe JRC engine uses CR10 jars or XI\R2 jars? Can you possibly try it with latest set of Eclipse jars? You can download it from Diamond.
    Thanks
    Aasavari

  • Flash exported from Keynote and embeded in iWeb page not working in IE

    using the "html snippet" widget and swfobeject code generated here: http://www.jeroenwijering.com/?page=wizard I placed a swf file generated by Keynote in an iWeb page.
    It seems to work fine except for folks using IE in Windows. They get to the first page, but the "Next" link doesn't work. My problem page address is here: http://shortpoem.org/readings/Selected_Poems.html
    Can anyone help me see what needs to change?
    This is the generated code (I also tried using the html generated by Keynote and had the same problem):
    <script type="text/javascript" src="http://www.jeroenwijering.com/embed/swfobject.js"></script>
    This text will be replaced
    <script type="text/javascript">
    var so = new SWFObject('http://shortpoem.org/readings/SelectedPoemsfiles/thoughts.swf','mpl','800','600','8');
    so.addParam('allowscriptaccess','always');
    so.addParam('allowfullscreen','true');
    so.addVariable('height','600');
    so.addVariable('width','800');
    so.addVariable('file','/upload/player.flv');
    so.write('player');
    </script>

    The code in your first post is not what you pasted in the Snippet.
    http://shortpoem.org/readings//SelectedPoems_files/widget0markup.html
    You simply exclude IE users.
    Have a look here for some inspiration:
    http://web.mac.com/wyodor/iFrame/
    http://web.mac.com/wyodor/Ajax/
    http://web.mac.com/wyodor/Ajax/Ajax_2.html
    And here:
    http://web.mac.com/wyodor/_Demo/defaultSWF.html
    It's the nested object code you need.

  • Create many pages is too slow, is there a way to format each page, not all?

    i'm creating hundreds of pages of report (very complicated report)
    when i using cliend/server version of oracle report, it created only the page
    user is viewing, and rest is not yet formatted.
    so even it has thousands of pages, since not all the pages were formatted,
    performance was not an issue,
    but now, using 10G, report is created using browser as html page instead
    of oracle's own cliend/server thing,
    if the report has thousands of pages, it is very slow since whole report is
    created and it has to wait till every page is formatted before displaying the
    first page.
    pagestream just changed the way it's displayed but still it formatted all the
    pages before displaying first page
    is there any way to format pages only when it's being viewed?
    or any other way to boost the performance?
    now it's pretty much unacceptably slow
    thanks

    i'm creating hundreds of pages of report (very complicated report)
    when i using cliend/server version of oracle report, it created only the page
    user is viewing, and rest is not yet formatted.
    so even it has thousands of pages, since not all the pages were formatted,
    performance was not an issue,
    but now, using 10G, report is created using browser as html page instead
    of oracle's own cliend/server thing,
    if the report has thousands of pages, it is very slow since whole report is
    created and it has to wait till every page is formatted before displaying the
    first page.
    pagestream just changed the way it's displayed but still it formatted all the
    pages before displaying first page
    is there any way to format pages only when it's being viewed?
    or any other way to boost the performance?
    now it's pretty much unacceptably slow
    thanks

  • When converting word to pdf, why does it pdf each page?

    I have a 3 page word document.  When I convert it to pdf, it converts each page & not the whole document.  Why does it do that & how can i convert all 3 pages to pdf?

    Empty the TEMP folder or print to the Adobe PDF printer. The latter might be worth trying to be sure things are working.
    You may have to uncheck a lot of the options in the PDF Maker preferences, particularly tags. Keep in mind that large graphics require a lot of disk space in the translation as the PS format is not very memory efficient for graphics (at least from what I have seen). You might also make a copy of the DOC file and then select a graphic and choose format. In the lower left corner of the general tab is a compress button. Try that to reduce the graphics resolution and see if that solves the problem.

  • Question: Is there a way to create a PDF from outlook e-mail that does not embed the attachment? better, is there a way to convert the e-mail with attachement (not embeded) as pdf pages? - Problem: I have 1400 e-mails with attachments that need to be conv

    Is there a way to create a PDF from outlook e-mail that does not embed the attachment? better, is there a way to convert the e-mail with attachement (not embeded) as pdf pages?
    - Problem: I have 1400 e-mails with attachments that need to be converted into pdf and the attachments cannot be embeded.
    System: PC Windows 7 using Acrobat X Prof. - Thank you!

    Hi ,
    There is an option of embedding index for faster search while converting email to a PDF .
    However I am not sure that will serve your purpose or not .
    I would recommend you to get in touch with Microsoft support as well .
    Meanwhile I'll work on it and get back to you in case I get a desired solution .
    Regards
    Sukrit Dhingra

  • Hello.  May I ask:  I am using Acrobat 6.0.2, and having trouble formatting a PDF created from multiple (jpeg) files.  Each page is formatted to A4 size, portrait.  But when I create the PDF, each sheet appears as tiny, in the middle of a huge white page.

    Hello.  May I ask:  I am using Acrobat 6.0.2, and having trouble formatting a PDF created from multiple (jpeg) files.  Each page is formatted to A4 size, portrait.  But when I create the PDF, each sheet appears as tiny, in the middle of a huge white page.  I cannot seem to find any controls to adjust this.  Any advice appreciated.

    Thanks CtDave, for the further info.  Unfortunately, those suggestions are not working, which is strange.
    ....Until last week, I used to make multi-page PDFs straight from Photoshop: File > Automate > Make PDF.  One simply choses the files, orders them, and creates a PDF.  (Resolution doesn't matter; 300 DPI is no problem.)  However, my new Photoshop CS5 does not have the option in Automate.
    What I've done, seeing as Acrobat is letting me down, is use Bridge (new to me) to create the PDF.  It worked without a problem, but seems like more work than the old PS method.  I will download a newer version of Acrobat to see if that makes any difference.
    .....Also, thanks Test Screen Name:  I agree with you that jpeg is irrelevant, and that one can make a PDF from Photoshop (Print > Save As - pdf).  But that only works for SINGLE PAGE pdf, not multiple pages as far as I can tell.
    Kind regards,
    Prince Nuada

  • I am using a code based typesetting program (not WYSISYG) that outputs PDFs. I am producing 100 plus pages that have multiple graphics on each page. I need to know how to format a PDF command that I can incllude in my programming that will tag my graphics

    I am using a code based typesetting program (not WYSISYG) that outputs PDFs. I am producing 100 plus pages that have multiple graphics on each page. I need to know how to format a PDF command that I can incllude in my programming that will tag my graphics with "Alternative Text".
    I know that with a Microsoft product graphics can be tagged before a PDF is made. I need to know how to do this with my programming.

    The Acrobat SDK might be a starting point.
    From there, perhaps a plug-in (built with C+).
    Perhaps with a licensed release of a PDF Library (this could be $$).
    The viable and cost effective alternative is use the tried and true.
    Authoring in an appropriate authoring application with appropriate tag management.
    Example:  Adobe InDesign; Adobe FrameMaker or MS Word with PDFMaker (comes with install of Acrobat).
    This way you place "Alternative Text" when mastering content in the authoring file.
    Going the route and with some look-see (research) you may find programmatic approaches to placing the alt txt in the authoring file.
    Note: as discussed in the Matterhorn Protocols there is no programmatic method that provides a fully accessible PDF (specifically, that is an ISO 14289-1, PDF/UA-1 compliant PDF).
    Regardless, here you have a sub-forum for discussions on Acrobat usage.
    Consequently discussions on/of 3rd party software is rather out of scope eh.
    Be well...

  • Header and Footer in not displaying correctly on each page in Adobe Forms

    Hi experts,
       I need your little help on Adobe Form.  I have develop a customer account statement and facing problem.
         In header and footer part I have to display customer address. It is ok if data is of one page. But when data is overflowing, customer address is showing only at first page in header, and not displaying address neither in header nor in footer(footer section will print on last page, it may be either first page or third page ) on other pages. (Address is table type data )
           Header and footer Section address has been designed on Master Page.
    Please help me to resolve these two problems as soon as possible.
    Regards
    Piyush

    I found this post which I hope helps:
    This can be done by bit of tweaking using JavaScript. 
    Actually the problem was, the header was printing continuously in subsequent pages and once the header data was over the rest of the pages contained blank header. But we need have to print same header for each group of items till that group of items finish in the specific page. And for new group of items different header will be filled and so on.
    So to overcome this issue, create the item table in such a way that the header data is also included in the item table for each group of items. In the layout, select your header field and the event READY LAYOUT and write the below JavaScript code. This event is called for each page for that header field, so you can directly map the item table value and put it in your header field.
    // Get the current page
    var currpage = xfa.layout.page(this);
    // variable to store number of fields in that page.
    var fields = 0;      
    // Get the number of fields
            fields = xfa.layout.pageContent(currpage-1, "field", 0);
    // Loop on each field on the page
            for ( i=0; i<= fields.length-1; i++ )
    // Check if the field is in the item table column (it will be actually header data column in your item table)
                if ( fields.item(i).name == "TL" ) 
    // Fetch that value and store in your header field.
                           this.rawValue = fields.item(i).rawValue;

  • Have a gap in detail of first page and not display group footer on each pag

    Please help me about Memo field in SubReport in CrystalReportXI. I have a SubReport that need to display pageheader, detail, page footer, and  in detail of subreport contains memo field and set the property of this text box to "Can Grow" = Yes .However, CrystalReportX does not support to display  pageheader, pagefooter in SubReport. So. I have created a formular FakePageHeader that has code  as
    "WhileReadingRecords;
    true"
    and group in this field and checked option repeat group header on each page and right click Section Expert->check print at Bottom of page for Group Footer.
    This problem is when I preview Subreport. It display text in group header and a gap in detail of first page and view next page, the subreport display right data of memo field. But the report still not display group footer on each page.
    How do I can remove a gap in first page and display group footer on each page?
    Thanks

    in subreport in format for the memo field uncheck keep object together.
    You can not force group footers to repeat on each page.
    I have not tried this but you might be able to capture the data you want to show in SR page footer and display in main report page footer, using shared variables.
    Ian

  • Page Header not repeating on each page of Subreport

    I made a crystal report whose record detail is opening in a subreport. I want to make Page header to be present on each page of my subreport but i am not able to do it. what setting i should apply for that?
    Regards
    Jitendra

    Hi Jitendra,
    You need to create fake page header in subreport.
    For more information, check out this link
    https://boc.sdn.sap.com/node/19833
    Hope this helps.

  • Prior to updating the iphone 5 to ios.7, i used to be able to go to Notes and scroll through all listings until I found what I wanted.  Now i am only able to view one page at a time and have to back and forth between the main menu and each page.  Help?

    Prior to updating my iPhone5 to the "new and improved" ios.7, I used to be able to go to my Notes app and scroll through the various categories until I found the item I was looking for.  Now, under the "improvements" I have to open each page, one at a time, until I find the desired category.  This strikes me as a big step backword.  Any solutions in the community?

    Have you tried restarting or resetting your iPhone?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
    Also consider deleting and reinstalling the Mail Account in question.

  • How do I set the zoom at a particular level as the default to ensure pages are not too small and that i don't have to change the zoom for each page? in English

    How do I set the zoom at a particular level as the default to ensure pages are not too small and that i don't have to change the zoom for each page? in English
    == This happened ==
    Every time Firefox opened
    == From the beginning

    Some add-ons:
    Default FullZoom: https://addons.mozilla.org/en-US/firefox/addon/6965 (I use this one)
    No Squint: http://urandom.ca/nosquint/
    Also:
    http://support.mozilla.com/en-US/kb/Page+Zoom
    http://support.mozilla.com/en-US/kb/Text+Zoom
    http://kb.mozillazine.org/Browser.zoom.siteSpecific

  • When I open a pdf in Adobe Acrobat xi pro it is not displaying correctly. If a file is all black with orange writing, I will see only the orange writing. Its not until i print it or open crop pages dialog box that i see the background. i am on a Windows 7

    When I open a pdf in Adobe Acrobat xi pro it is not displaying correctly. If a file is all black with orange writing, I will see only the orange writing. Its not until i print it or open crop pages dialog box that i see the background.
    i am on a Windows 7 professional PC, 64-bit.

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

Maybe you are looking for