Audio in iChat not working?

I have been trying to have an audio chat with a friend of in Germany using iChat, and he can here my audio, but I can't hear him.
We check the various audio settings, and everything looked OK, so I thought it might be a hardware problem with the mic.
As a test, he recorded a video of himself with Photo Booth – and the audio did work!
So, as a further test, he installed Skype and we did an audio call with that... and it worked.
So, any ideas why the audio would not be working with iChat? Same result with video chat, too, not surprisingly.

Hi Tor,
I need to know more that "It looked OK"
Could you get some Specific answers please ?
In iChat.
In the Video Menu is the Microphone Enabled item Ticked ? (selecting it will toggle it Off or On)
In the View Menu is Show Audio Status similarly ticked ?
In System Preferences
In Sound > Input tab is the Mic or input device he wants to use selected ?
If it is, when he talks does the Blue Bar more over Halfway ? (3/4s is better but NOT Banging in to the right hand end)
Back in iChat > Preferences > Video/Audio Settings is the same Mic chosen ?
For Some Headsets particularly Bluetooth ones the iChat items needs setting "Last"
Workaround.
In both iChat and System Preferences chose any other Input device.
Then set the device/Volume in System Preferences.
Then Select the device in iChat.
(Do the same for Output)
If these things are as OK as you first thought then what is his Internet Speed ?
http://www.speedtest.net/ (Use Yellow Star and any sub menu that has)
In your Connection Doctor (Video Menu of iChat) during a Chat, what does his Bitrate say ?
Anything close or lower than 100kbps is going to be a problem.
Does his Audio bar say he is sending you Audio ?
Is he using iChat 5.x ?
Does he have any iChat Add-ons ? (Showmacster, iUSBCam are the most likely for Audio Issues.)
IS he using an mAudio or MoTU device ?
Has it the most recent Update ?
Has he set that up in MIDI Audio Setup ? (it might pay to change the Sample rate to 44100)
9:33 PM Friday; November 12, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Similar Messages

Ichat not working

I just got the macbook about a week ago and tried connecting with my sister and it would work but after a couple minutes it was freeze and the error message said that no data was received in the last 10 seconds. I live in Orlando and she lives about 2 hours south in Port St. Lucie. A couple days after that, I connected with my friend who lives in the same town and it worked perfectly fine until we started a chat again with my sister and we are now getting the same errors....the screen will freeze and the same error message will come up. We contacted apple support and change our port settings but nothing has worked. Our computers are brand new and we figure that cannot be the issue. The audio chat does not work as well. It freezes as well. We have also gotten information that it could be the different internet connections or the specific time of day we are using it. If there is any other solution, please help. Thanks.

I changed all those settings and have been even trying other ones but the problem still exists. I am bringing my computer home with me this weekend so maybe being connected to the same wireless network will help the ichat work a little better. If there are any other suggestions as to why this problem keeps recurring and solutions, please let me know. Thanks!!!

Audio output will not work on external speakers. Internal speakers will work. What do i do to replace audio output slot

audio output will not work on external speakers. Internal speakers will work. What do i do to replace audio output slot

Right click your volume icon in the notification area and select "volume control options". From there, you should be able to select the external speakers.
I hope that helps!
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Audio captcha is not working in mac safari 5.1.7. We used below code snippet that is working in other browser like IF 7,8,9, crome and firefox. Audio refresh is also not happening. When submit Audio Captcha then jcapcha framework giving InvocationTargetEx

Audio captcha is not working in mac safari 5.1.7.
We used a code snippet that is working in other browser like IF 7,8,9, crome and firefox.
Audio refresh is also not happening.
When submit Audio Captcha then jcapcha framework giving InvocationTargetException.
<Edited By Host>

Audio captcha is not working in mac safari 5.1.7.
We used a code snippet that is working in other browser like IF 7,8,9, crome and firefox.
Audio refresh is also not happening.
When submit Audio Captcha then jcapcha framework giving InvocationTargetException.
<Edited By Host>

Audio Service is not Working.

HI everybody,
So today i just turned my pc on after a few days and noticed that there was RED CROSS "X" on my volume icon. It says that Audio Service is not working. i opened services(service.msc) searched for it and when i tried to start
it gives me this ERROR! I searched for solutions over the net as well as here. Recommendations that i found were
>Reinstall the drivers
>Unisntall drivers from Device Manager and then reinstall. (WHEN I TREID TO INSTALL DRIVERS IT GAVE ME ERROR THAT "AUDIO SERICE IS NOT RUNNING AND COULDNT BE STARTED" )
>Run "RPC" service and "Endpoint service". Currently both are running !
Last but not least, u must be thinking that why i posted such a big post, this is because others problems were solved and issue was also a bit different. :D
(I tried to post two images but the site said that u are not allowed to post images and links!)
Thank you all in advance, and please help me quick to solve this problem. I cant play games without sound for long ! :"(

Hi
Are you installing new drivers downloaded from the manufacturer website or letting windows install it for you?
Try disabling the sound card in the bios, reboot and then enable it again, reboot and see what windows does.
Can you also run a sfc scan and see if there are any corrupted files?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

IPad audio output is not working properly, except on Siri. Any ideas on what is wrong and how to fix it?

iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help. The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't. Any ideas on what is wrong with it and how to fix it?
my iPad is a 3rd gen, 16GB wifi only model, if that helps
I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!

Godly19 wrote:
iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help.
iOS 8 isn't even out yet. If you are running iOS 8, I assume you are a developer and if you are, you are in the wrong forum to try to get help. If you are not a developer and you're running iOS 8, maybe that's why you are having problems on the iPad.
The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't. Any ideas on what is wrong with it and how to fix it?
The type that I made bold doesn't make sense. Is this a typo and you mean that " headphones are not in"?
I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!
And you know they are incorrect because you get sound here and there from time to time? That fact doesn't prove that something isn't working correctly inside. You could very well have a bad connection inside the device causing this, but somehow you seem to know that's not the case.

Multicam source sequence - audio offset does not work when syncing via audio

Working double sound with Canon 5D footage and syncing via audio is a big help, but the camera sound is one frame ahead of the video.
Merge clips requires each v/a clip pair be selected individually AND can't be slipped after merging - so that's no good.
Create multi-cam source sequence works a treat AND offers an audio offset BUT that does not appear to work when syncing via audio (I understand why you might think we wouldn't need it but...)
Unlesss I'm missing something?

I have the same problem. Syncing video via audio in multicam works perfectly on my 3 cam shoot but audio offset does not work. Had to do that on the sequence timeline afterwards.

Microphone speaker and audio jack is not working?

hi i buy a I phone 5 S in march from E max UAE . Its been 3 month only but my phone audio jackpot is not working ,microphone and speaker is not working moreover if i open some app for longer time and during charging it get hot. I took the phone to the store tell them the problem and the phone is in warranty also but they didn't change the device they say we cant change and just repair the device. its been two days my phone is back again i am facing the same problem .can anybody suggest me where should i go for complain and what i will do to change the device.

I've asked the hosts to relocate your post to the iPhone forum -> Using iPhone - this is the MacBook Pro forum.
Good luck,
Clinton

Front panel audio jack is not working on K9N Neo V2

My front panel audio jack is not working on K9N Neo V2. I check the JAUD1 cable and it appears to be connected to the front panel audio jack. My soundcard driver cannot detect any gadgets when I plug it in the front panel. My audio drivers and BIOS are up to date. Is there any known solution to this? My computer is only a few months old and I have not tried the front audio jack until recently. I'm on Vista home premium btw.
Also, I've got another problem, my processor is AMD 64x2 4400+ overclocked to 2.63Ghz. I've been using that clock value ever since I built this computer and stress tested the processor and found that it would not cause any problems like hanging or overheating. However, I recently decided the need for AMD's Cool & Quiet technology and enabled it. It caused BSODs every few days or per week that didn't happen before. I tried it with the default clock value and it still causes BSODs. Can someone help me?

Quote
Thanks. Its ironic that disabling it actually enables it.
It has to day with the front panel audio wiring of your case. How many wires are there that can be connected to the board's pin header?
Quote
Sound quality isn't very good
Can you be more descriptive? Is the quality better if you plug the headphone into one of the jack at the back panel? (Also, make sure you tell the Realtek HD Audio Manager, that a headphone is connected (and not regular speakers).

Audio device is not working, i have installed proper drivers, but audio device is not working

hi,
I have installed registery mechanic last week and made a system run in my laptop. After re starting my laptop, my audio devices are not working fine. I have installed the drives correctly and they are reflecting in program lists, how ever the audio device is not working. If I am reinstalled the system, My audio device is working fine, I have installed a fresh OS, but sitll its not working fine, could you help me to fix this one.

Tecra A8
Model No = PTA83L-04C02N
Can you please tell me from where I need driver so that my "Fn" key will be operation? Right now I tried to use "Fn" with F6 and F7 which suppose to change screen resolutions but nothing is happening.
Can you please tell me if I reinstall New OS (Windows XP - Sp2) then in which order which driver and Toshiba software I should install?
Hard to find XP drivers and utilities for that machine, Manoj. But you're in luck because the Asian part-number family PTA83L corresponds to the European PTA83E.
Go to the European download site and look up the Tecra A8 with Short Model No. PTA83E. You'll find 40 XP drivers, utilities, and BIOS updates.
Install the Chip Set Utility first, then the Display Driver, and then the other major drivers. Install the Common Module prior to Toshiba utilities and other programs.
Good luck!
-Jerry

My audio device is not working

hello
I don't know the reasone behind it but my audio device is not working but I rember accedentally i uninstail my IDT audio device.

Hello rasfunkey,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you have uninstalled your audio drivers and require assistance. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

My Internal Microphone Array (IDT High Definition Audio Codec) is not working

Hi,
My Internal Microphone Array (IDT High Definition Audio Codec) is not working.
I cannot do Skype calls.
I have already tried everything but still I'm not able to fix the problem.
Could you please advice me what to do?
Could you please provide me with a link with the drivers I may need to reinstall.
My computer is HP, Windos 8.1, 64-bit operating system, Intel i-7 processor.
I would really appreciate your quick answer to resolve this issue.
Many thanks,
Antonio
This question was solved.
View Solution.

Hey,
Try installing this driver: IDT High-Definition (HD) Audio Driver
If that fails, try using the HP Recovery Manager to roll back to the factory installed driver.
Test after both. Let me know if either option worked.
I worked on behalf of HP.

"Itunes has detected a problem with your audio configuration. Audio/Video may not work properly".

Turned my Dell running windows 7 off 2 days ago. Turned on today. Launched ITunes and got message "Itunes has detected a problem with your audio configuration. Audio/Video may not work properly".
All my albums are there but won't play.
Deleted Itunes and reinstalled. Same as before.
Any ideas ??

Hey MrCurwen,
I was able to find an article that included the same error message you're experiencing:
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371
According to that article, if you see the error message "iTunes cannot run because it has detected a problem with your audio configuration," QuickTime may need to be reinstalled. Please follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
On the Start menu, click Control Panel.
Follow the steps appropriate for your Windows operating system below.
Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
During the download:
If you choose to run the installer, proceed to the next step.
If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
Follow the on-screen instructions to install QuickTime.
Reopen iTunes.
Cheers,
David

Camera (Skype, FaceTime, iChat) not working after installing Maverick OS

camera (Skype, FaceTime, iChat) not working after installing Maverick OS

kwmaclean wrote:... same problem...
If How to Troubleshoot iSight doesn't help, Reinstall OS X.
Message was edited by: EZ Jim
Mac OSX 10.9

My ichat not working

since this afternoon, my ichat not working in my macbook pro, the error massage is as below, yet the ichat on my iphone also not working

HI,
If you are using Mountain Lion (OS X 10.8.x) then you will have Messages and not iChat.
Messages can do everything that iChat can do and more.
The More is the iMessages bit.
This uses the "registration" of an Apple ID with the iMessages servers
You can use the same ID on your iPhone or iPad in the iOS version of Messages.
iMessages are then displayed across all devices. (Generally refered to as "Syncing" but it is display only)
However Messages does come with a large interface window that also doubles as a tabbed Chat window.
In Messages Menu > Preferences > Accounts you should have your AIM, AIM Valid and Jabber IDs set up if you migrated from Lion.
This will give you a Keystroke in the Window Menu of CMD + 1 for the "Buddies" option.
This is a combined Buddy list.
You can unlink them in the General Section of the Messages preferences.
10:12 PM Tuesday; October 30, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Audio in iChat not working?

Similar Messages

Maybe you are looking for