Audio in Premiere Pro CS3 appears on one PC, not the other
Hi everyone,
I'm the Network Administrator for a high school and we have a digital media lab here using Adobe Creative Suite 3: Master Collection. All systems here are running Windows XP Professional and are on a Windows domain. All users are standard users, with no administrative rights for obvious security reasons. When I originally did the deployment of the lab by running sysprep on a reference computer and using ghost to deploy the rest of the computers, I noticed a problem with Premiere Pro CS3 after the deployment. In that lab, none of the computers would capture video via firewire and the built in capture function in Adobe Premiere CS3. I believe I have a post about this on these forums that was never resolved. To get around this, I'd capture the footage for students in my office and then transfer it over to their network drives so they could import it into Premiere Pro CS3 and edit the footage.
Recently, the school purchased some HD cameras that record to a built in hard drive or an SDHC card. The idea here was that the .MTS files could be copied from the camera to the computer running Premiere Pro CS3, the media files in .MTS format [at 1280x720] could be converted using KoyoteSoft's Free HD Converter using the settings MPEG2 [a preset], MPG2 as the format, 1280x720 // 16/9, 29.97 FPS, 9000 video bitrate, and 224 audio bitrate, and then the new media files could be imported into Premiere Pro CS3 and edited using the HDV 720p30 preset within Premiere Pro CS3.
This works great...on my office computer.
The problem is that if any student tries to import their footage on a computer in the digital media lab, the converted media files, the exact same ones that just imported into my Premiere Pro CS3 installation on a computer in my office with identical hardware as the computers in the digital media lab, fail to import the audio. I can see the video with no problems in the lab, but no audio layer appears. If I right click the video file and choose Open With> VLC or another media player, the media plays fine with audio. All audio/video codecs that are installed on my machine are also installed on the digital media machines. If I right click Adobe Premiere Pro CS3 from within a student account on those computers and choose Run As and use the local administrator account, Premiere Pro CS3 does the exact same thing, it still can't see the audio. Adobe CS3 is fully up to date on both my office computer and all digital media computers.
Any help fixing this would be greatly appreciated, spring break is coming up here this coming week and I'll be here all week. Hoping to get this resolved during that time so students can edit their own movies. Again, video imports, audio doesn't. No audio layer appears.
Thanks!
See if this helps... To work with AC3 sound files in Premiere CS3, copy the ad2ac3dec.dll file from the Encore CS3 directory into the Premiere directory
Similar Messages
-
I have 2 older iPod touches and 1 computer. It will reconize one but not the other. How do I sync music on both?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar -
I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other
If you want Bridge CS6 to open when using Photoshop CS6, you must quit Bridge CC.
Then File menu > Browse in Bridge will bring up Bridge CS6.
If Bridge CC is already open, The File > Browse in Bridge for Photoshop CS6 will use Bridge CC and Bridge CS6 will not open.
I hope that's the answer you were looking for.
Gene -
I have 2 email accounts for 2 people. TB will download mail for one but not the other. It can't authenticate the password. Passwords are both the same. Worked fine until today.
The amount of information makes it somewhat hard to give a specific answer. I could only recommend:
* Can you log into the account using the webmail service from your provider?
* Have you verified the settings for the account to be correct (protocol, port number, password encoding)?
The following page gives you a good start with resolving this issue:
https://support.mozilla.org/en-US/products/thunderbird/fix-slowness-crashing-error-messages-and-other-problems/fix-problems-email-providers-gmail-yahoo-etc
Hope this helps! -
HT5622 How do I set icloud on 2 ipads.It recognises one,but not the other one?
How do I set up icloud on 2 ipads? It recognises one but not the other one.
Hi Leora Beisly,
Thanks for visiting Apple Support Communities.
Before setting up iCloud on your devices, I recommend updating to the latest iOS software version. This will ensure that you can use all of the iCloud features on your devices. See this article for information on updating your iPads:
Update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
Next, see this page for iCloud setup instructions:
iCloud: Set up iCloud on your devices
http://support.apple.com/kb/PH2609
Before you can use iCloud on each of your devices, you need to sign in to iCloud using your existing Apple ID or a new one, then turn on the iCloud features you want to use.
You may have set up iCloud on your iOS device or Mac when you first used it. To make sure it’s set up correctly, or to set up your iCloud account on another iOS device, computer, or Apple TV, go to the set up iCloud website listed below.
Important: Be sure to use the same Apple ID when you set up iCloud on each device.
Best Regards,
Jeremy -
I have 2 iPads, I can only download some apps to one device not the other one?
I have 2 iPads, but can only download some apps to one and not the other?. How can I get the same app on both iPads?
Thanks1. Make sure iPad is using the latest software
2. Settings>General>Date and Time>Set Automatically>On
3. Make sure Time Zone is correct
4. Reset iPad. Hold the Sleep and Home button down until you see the Apple Logo. -
Premiere Pro CS3 (Version 3.0) will not start following upgrade to Windows 8-- rest of CS3 is fine
Recently upgraded from Windows 7 Ultimate to Windows 8 Pro;
next time I tried to open Premiere Pro 3.0 (Adobe Master Collection CS3), splash screen scrolled normally through files being loaded until "SolidComposite.AEX", where it white-screened & crashed.
Tried removing that file, it crashed on the next ".AEX" file; removed all ".AEX" files, it began crashing on ".dll" files;
kept removing THEM, just for the heck of it, until the software loader couldn't even start.
I popped in the CS3 disc to repair the installation-- on the entire suite, for good measure;
re-booted & started Premiere-- crashed at the exact same point.
Uninstalled and then re-installed Premiere-- the entire suite in fact, since there are so many common processes;
couple of hours later, re-booted & started Premiere-- same exact thing at the same exact point.
I found this same problem in at least a half-dozen threads, going back to '07--
and several of them even mentioned the same exact file as the trigger for the crash!
Unfortunately, not one of those threads has ever ended with an accurate diagnosis of the problem,
nor a solution more insightful than reinstalling both the CS & the OS.
I don't want to abandon Windows 8...
but on the other hand, I just can't afford to pony up another grand to upgrade the CS Suite again, either...
Besides: CS3 is everything I need, and it has worked wo well for so long--
even now, Premiere Pro is the only software in the suite with a problem!!
(I used Photoshop to create the above screencap)
So I'm hoping against hope that one of you techno-gurus may have come across this ITRW--
and actually SOLVED IT!!Thanks for your prompt reply, John-- and for NOT simply advising me to spend my kid's tuition on more of your company's products...
Actually, I had tried the "Run as Administrator" option already, having found it in one of those other threads;
there was no change in the sequence described above.
I decided to try another possible solution which I read about in one of those other threads: opening Premiere from a different account.
Incredibly, it WORKED-- sort of...
I got a couple of popups advising me that missing codecs had to be installed-- and upon completion, Premiere opened!
Here's an interesting note: the last file to load was still "SolidComposite.AEX"-- and the "White Screen" I kept seeing was Premiere opening normally. The next thing that displayed was the normal dialog box "Open/New Project"-- I entered a new project name, and Premiere started normally. I even added a few video files as a test... all opened normally.
I returned to the Admin account to see if the fix was in here, too;
but clearly the war wasn't over, over here...
It now appears that some personal setting in the Admin account is causing Premiere to close itself;
I've been reading about the layered security measures embedded into Windows 8-- I'm suspecting the conflict lies there...
I ran the Windows Troubleshooter & got this:
both MS & Adobe confirm that CS3 is fully compatible--here's my sytem info:
Since I seem to have established a fall-back position that lets me use Premiere, my crisis becomes a mere conundrum;
but I know this is gonna gnaw at me anyway, & I'm hoping that this new information might suggest further troubleshooting options to someone who understands the Adobe software and/or the Windows software better than I do!
Speaking as someone who has found many solutions on forums like this over the years, I assure you:
for every person whose post you reply to, there are many more whom you will never know you have helped!!! -
"Media Offline" in Premiere Pro CS3 .. but it's not offline!
If anyone is able to advise on a technical problem in Adobe Premiere Pro (CS3), I'd be most appreciative I'm hoping someone will be around anywhere to help solve this...
Please look at:
http://www.thepfjstudios.com.au/images/PremiereProblem.jpg
to understand my issue better. (Img 1440x900, approx 210kb)
In the upper left box are the videos in the project. This issue is with all videos in the project, but for the example, I'm looking at the highlighted video, MOV03C_03.mpg. The thumbnail at the top of the list shows the video is working, I can play it fine by pressing the play button next to the thumbnail.
The same video, MOV03C_03.mpg, is in the timeline at the current point of the cursor. The current timecode is 00:00:55:22 (hh:mm:ss:ff). I don't understand why the monitor on the upper right corner is showing the video (and all videos in the project) as "media offline", when they're all in the project and able to be played, therefore *not* offline.
Is there some way I can fix this? It's for a university project that I'm needing to deliver to our customer this week...The guy that said "if an Asset appears as Off-line, it is because the Asset IS Off-line" obviously hasn't seen this problem before.
You are absolutely correct here. Most users have not seen this problem before. In my search of these fora, I found only this, and one other thread where this behavior was reported. In all others, the problem came about because of things like Paths changing (external drive letter changes were the most common). There were cases where the Path was changed by Renaming, Moving and Deletion, but only this, and one other instance, where something else intruded.
Now, it appears that you also encountered the issue, so that runs the count up to three. There are possibly others, who have never posted here, but we cannot count them, unless one searches every possible forum on the Internet.
It is good that you have found a way to get around the issue, and thank you for posting that.
I do, however, have a little problem with your attitude. A forum respondent can only comment of problems that they have had, observed from others, or have read about. If few users have encountered this issue, it might seem that it is related to but a few Projects, systems, or users' actions. If it were a universal Bug, it would seem most logical, that many others would have encountered it, and reported it.
You are correct. I have not encountered this problem, and it appears that most other users are in the same exact position. Maybe we do something differently, or our systems and Projects are different enough, that we have just been spared. I am not sure that is a bad thing.
Again, thanks for posting your keystrokes to handle the problem, when it arises. I hope that will help others, when they show up.
Good luck,
Hunt -
Premiere Pro CS3 Crashes when I right click the timeline
I have Premiere Pro CS3, and it runs fine most of the time. But as soon as I right click on one of the video clips on the timeline, it crashes and gives me an error: "A serious error has occured that requires Adobe Premiere Pro to shut down." This happens pretty much every time; but only when I right click on timeline clips. I'm using Windows 7. I also have it on my laptop (Also windows 7) and I don't have any trouble running it there. No crashes even once. Any ideas?
More information needed for someone to help... click these links and provide the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406
Does this happen will ALL types of video?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
Are you running CS3 in compatibility mode?
PPro before CS5 NEEDS to be run in compatibility mode with Windows 7, which means right click the program icon and select WinXP compatibility mode from the popup
http://windows.microsoft.com/en-us/windows7/help/compatibility
OR
If you have Win7 64bit PRO or higher, try Microsoft's Virtual XP
This is only ONE example of using Virtual XP http://forums.adobe.com/thread/702693
-And a Tutorial http://windowssecrets.com/newsletter/using-windows-7s-xp-mode-step-by-step/
What is your EXACT brand/model graphics adapter and driver number?
Example... I have an nVidia GTX285 with driver 296.10 -
2 Apple TV's; Mirroring to one but not the other
Help me Apple Communities you're my only hope.*
I have 2 Apple TV's on the local network, bothe with Airplay enabled. One labelled AppleTV, the other labelled TV Upstairs.While I can happily stream music and video to both devices from iOS or the MacBook Pro, Mirroring is another matter.
On my iPad 2 when I select Airplay to the Apple TV it comes up with the option for Mirroring. However selecting the TV Upstairs Apple TV does not provide this option, and only sound output only, with quite a delay. The iPad 2 is iOS5, and both Apple TV's are latest stable release. The Time Capsule is upstair with the Upstairs AppleTV.
Any ideas for this?
* guess what I was testing video streaming with.I think you may be suffering from the same issue as many others in that case.
The situation over the current update seems a little unsure at the present time.
4.4 was released, it was then replaced by 4.4.1, which itself was removed and then made available again, it seems from the number of related post that it may have been removed again.
Some posters are still reporting success by updating via iTunes but I can't confirm that these posts weren't simply referring to other times when the updates were available.
I'd be inclined to sit tight and try again at a later time. -
I bought a 5th Gen Touch. I use iTunes 12 on my two computers. I first connected the Touch to my desktop and it allows me to drag and drop mp3 files from my old Classic, which is backed up to a directory. Unfortunately, that computer has gone down before I got a chance to fill the Touch. I have the files on another computer but when I connect the Touch to it, it doesn't allow me to drag and drop the files. I have iCloud set on both systems and I have manual management check marked. I'm not understanding why it allows drag and drop on one PC and not the other when they are both set the same way. My question? What do I need to do to be able to drag and drop in iTunes 12? I didn't do anything special on the computer that allows it so I am at a loss.
Thank you!Oh, also want to add that the PC I'm currently using is:
Windows Vista Home Premium Service Pack 2
My other PC was:
Windows 7 Ultimate
My MacBook is:
Max OSX 10.5.something (the last update available for it. .8 maybe? haha)
Not sure if this stuff is important, but I thought I'd add it. -
Script works on one site, not the other... why?
Could someone tell me why this prototype-based lightbox seems
to work on one
site but not on the other?
I literally took the exact same .js & css files, copied
them over from one
site to the other, but it's only partially working on the new
site.
http://www.vilverset.com/sample.html
And the original fully-functional one :
http://www.roxanacampagiorni.com/
Been troubleshooting this one for days, and I'm stumped.
Script wants
nothing to do with lightboxing HTML files on the new site.
Only straight
JPGs."Michael Fesser" <[email protected]> wrote in message
news:[email protected]..
> .oO(Mark A. Boyd)
>
>>Strange. I don't think I've ever seen these headers
before:
>>
>>
http://www.vilverset.com/tn_posters.html
>>POST /tn_posters.html HTTP/1.1
>>HTTP/1.x 405 Method Not Allowed
>>Allow: GET, HEAD, POST, PUT, DELETE, CONNECT,
OPTIONS, PATCH, PROPFIND,
>>PROPPATCH, MKCOL, COPY, MOVE, LOCK, UNLOCK
>>
>>I suspect a server configuration - or version.
>
> I consider it a script problem. Why does it send a POST
request instead
> of GET? IMHO the server's response is correct, because
it doesn't make
> much sense to POST something to a static .html page.
That's what I told a helper friend of mine, but he told me
the POST is done
by the server, not the JS files. That's why, according to
him, he couldn't
tell me what code to change in the .js files.
But here they are, if you would be so kind as to tell me WHAT
to replace
with WHAT so the call is made properly. :-)
http://www.vilverset.com/scripts/control.modal.2.2.3.js
http://www.vilverset.com/scripts/effects.js
http://www.vilverset.com/scripts/prototype.js
Those are the 3 files needed for the script.
Should I be banging on Dreamhost's door to fix something, or
not? Because
the exact same 3 files will render an HTML page just fine
over on
roxanacampagiorni.com.
Which is the guilty party? The script, or the server config? -
2 identical iPhones-Airprint works one, but not the other?!
My husband and I both have iPhone 4S 32GB. We're using an HP Photosmart 6510 which is both ePrint & Airprint ready. Here's the problem:
I can print via ePrint or Airprint, but my husband's phone will ONLY do ePrint. I don't get it! We have the printer and both iPhones on the same wireless network. He even gets a message that his print job is sending/printing, but nothing prints. I can Airprint the same file from the same e-mail and it works fine. HP is useless...they just keep telling me to reboot the phone and/or reboot the printer. This fixes the problem initially, but a day or two later, the same thing happens. it's very frustrating and I'd really like a permanent fix for this.
Can anyone help?! Please?!
Thank you!!Thanks for the feedback. It's worth a try. What's making me crazy is why would one phone work and not the other? Rhetorical question, but still making me crazy.
-
Internet broken on one OS, not the other
A few weeks ago, I was trying to fix some bug that was causing my main operating system (Mountain Lion) on my MacBook Pro (early 2011) to constantly create virtual memory, killing my battery at tremendous rates, eating up my hard drive and destroying my computer's performance. I spent forever trying to fix the stupid problem, and found somewhere that deleting certain .plist files (but not these specific apple ones) would fix the problem.
It fixed the problem! No more slow computer!
And then my internet stopped working. But only on that operating system, Mountain Lion. I have another operating system partitioned off, Snow Leopard, that I use for legacy software, and it works perfectly fine still.
A week ago I upgraded Mountain Lion to a developer version of Maverick (no comments), since Mountain Lion was screwed anyways without internet and I thought, why not? Maverick works great, and I thought the update might fix the internet, but it [I]still doesn't work.[/I]
I've deleted all my network connections, deleted all network plists and recreated everything from scratch. The connection is great, I have a local IP address—it just won't connect to any websites!
Google.com would actually work for a while and allow me to search things. Weirdest thing. It stopped working though.
Again, my Snow Leopard is getting internet fine. That's what I'm on now.
I've searched the web up and down for this specific problem and I can't find anything on it. So I finally gave up on trying to fix it myself, and here I am.
Help me please?Have you tried trashing /Library/Preverences/SystemConfiguration/NetworkInterfaces.plist ?
In some instances renaming the folder /Library/Preverences/SystemConfiguration and adding .old on the end and rebooting the mac will refresh all of the Network Interfaces and Power Management settings enough to resolve networking issues.
Have you tried to connect to a different network? Is the issue the same on all Networks? Does Ethernet work?
Are you able to use Network Utility to Ping any site? Are you able to Ping an i/p address on the internet? -
JDBC with CLOB abnomally - shows on one server, not the other
Hi have a problem.
I recently moved a web application to another server. I copied over all the same java libraries I had on the first server.
The web application queries an Oracle table - the table contains one CLOB field.
When I query the table on the first server, I can see the contents of the CLOB.
When I query the table with the other server, the query is empty for the CLOB field.
This is the code I use to query the table. I have connection pooling set up within Sun Web Server. If it works on the one server, why would it not work with the other server? This is driving me crazy!!
Any suggestions?
try{
// Get connection from configured pool
initContext = new InitialContext();
source = (DataSource) initContext.lookup("java:comp/env/jdbc/myDB");
conn = source.getConnection();
if(conn != null){
stmt = conn.createStatement();
result = stmt.executeQuery(sql);
rsmd = result.getMetaData();
while(result.next()){
Hashtable hash = new Hashtable();
for(int i = 1; i <= rsmd.getColumnCount(); i++){
if(result.getString(i) != null){
hash.put(rsmd.getColumnName(i),result.getString(i));
}else{
hash.put(rsmd.getColumnName(i),"");
returnValue.addElement(hash);
}catch (Exception e){
setErrors(e.toString());
Email.sendMail("[email protected],"subject","Exception: " + e.toString() + "\nWith: " + sql,"fromname");
}I tried that with this code:
<body>
<h1>
JSP Example
</h1>
<%
Connection dbconn=null;
ResultSet results=null;
PreparedStatement sql=null;
try{
Class.forName("oracle.jdbc.OracleDriver");
try{
boolean doneheading = false;
dbconn = DriverManager.getConnection("jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=host.com) (PORT=1521))(CONNECT_DATA=(SERVICE_NAME=theserver.com)))","username", "password");
sql = dbconn.prepareStatement("SELECT * FROM BE_STATUS_EMAILS WHERE ID='42575'");
results = sql.executeQuery();
while(results.next()){
if(!doneheading){
out.println("<table border=2>");
doneheading = true;
out.println("<tr><td>" + results.getString("ID"));
out.println("<td>" + results.getString("RECEIVED"));
out.println("<td>" + results.getString("TYPE1"));
out.println("<td>" + results.getString("FROM1"));
out.println("<td>" + results.getString("TO1"));
out.println("<td>" + results.getString("CC"));
out.println("<td>" + results.getString("SUBJECT"));
out.println("<td>" + results.getString("MESSAGE"));
out.println("<td>" + results.getString("STATUS"));
if(doneheading){
out.println("</table>");
}else{
out.println("No results");
}catch (SQLException s){
out.println("SQL Error<br>");
}finally{
if(dbconn!=null)dbconn.close();
}catch (ClassNotFoundException err){
out.println("Class loading error");
%>
</body>It produced the output, but again, the CLOB field was null. But when I query the database with that SQL using a database query tool, like Aquastudio, I can see the output. And if I run the stub on the other server, it works! This is nuts!!
Any suggestions?
Maybe you are looking for
-
Is it possible to add a backlit keyboard to an hp envy touchsmart 15
is it possible to add a backlit keyboard to an hp envy touchsmart 15?
-
I downloaded more than ten invoicing apps from the App Store yesterday to check them out for ease of use. I ended with five on my iPad to consider and entered trial info on each. This morning I noticed I had duplicate headers in my calendar for maj
-
Change the language in the display-name of a train stop
Hello, does anybody know how to use internationalization in the <display-name> of a train stop? Bye
-
Hello there, I have managed to find a send-mail script in PHP in order for site users to be able to send me their comments, questions, etc. However, I receive the email but I only receive what the user has selected in the drop down menu, I can change
-
Do we have to use FB DIMMs? Maybe it's just CAPABLE
Do we have to use FB-DIMMs? maybe it's just capable of using those DIMMs if you want to dish out for the top of the line RAM. Will my current RAM work in the new MacPro? DESCRIPTION: 2GB PC2-4200 (533MHz) non-ECC DDR2 240-pin DIMM memory upgrade kit