Audio interface and external hard drive config for new imac 21"

Hi. Just got the new imac 21" and I'm considering using it as my main daw with Logic Studio as an upgrade from my old sonar mobo. I usually run up to 40 tracks of recorded audio with fx plugs. I hope to do this at 24 bit 96 instead of 24bit 44 like I did on the old system. I also run the occasional softsynth and sequencer which I don't mind bouncing down to .wav to conserve cpu.
I really like the specs on the m-audio profire 2626 (I need the 8 mic inputs for recording drums) which needs firewire. But at the same time I'm reading a lot of recommendations about using an fw800 external drive for audio. I've read a little about daisy chaining and I'm wondering if anyone's gotten this type of configuration to work. I'm also open to any other configuration options you have to share that would enable my goal of successfully using this mac with logic.
thanks in advance for the help,
dave

I run three firewire audio interfaces daisy chained together, 2 Presonus FP10's and an Alesis Multimix8.
This gives me 24 simultaneous inputs. I normally record 24 bit at 88.2 . My iMac has a FW800 and a FW400 port. What I tried to do was run all the interfaces through the 400 and record to a FW800 external hard drive but I it kept dropping out interfaces, even if I used only one interface. I switched firewire cables on the hard drive to a 800/400 so that the hard drive was now operating as a 400 and I did not have any more interface drop outs.
Even though the iMac has 2 firewire ports, they connect to a single cable to the i/o inside the Mac. If I try recording to an external hard drive, that is 24 tracks going into the Mac, back out to the hard drive, back in to the Mac and then back out to the interfaces and on to the monitor speakers. That is a lot to ask of a firewire connection.
So, I record to the internal drive and use the external for backing up and saving the projects.

Similar Messages

I connected my external hard drive to my new imac to put all of the information from my macbook onto it. i have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done?

I connected my external hard drive to my new imac to put all of the information from my macbook onto it. I have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done? or is it possible?

As I said, I don't use Time Machine, so it'd be best to wait for an "expert" answer, but, with my very limited knowledge, I'd say: probably not - so, for now, I'd suggest you read up on Time Machine:
http://web.me.com/pondini/Time_Machine/Home.html
http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=time%20machine
And, you might be attracting more knowledgeable answers if you were to post this question in the Time Machine Forum (part of the Snow Leopard forums).

How can i view and upload photos from an older version of iPhoto which are on an external hard drive to my new iMac? i currently have copied the application version 9.4.2. on my lacie backup and want to view and upload this to my new iPhoto version 9.5.1

our old iMac died suddenly, but i had backed up the iPhoto application to a lacie external hard drive. however, when i try to open it in my new iMac which is installed with version 9.5.1 and is upgraded to maverick, it comes up with “cannot be opened, to open you must upgrade to latest version” and then makes you press the quit button.
the iPhoto version on the external hard drive is iPhoto 9.4.2 which i upgraded on 29/11/12 onto our old iMac (early 2007 version)
my new iMac is running on version OSX 10.9.1
i have looked at buying iphoto library manager and have emailed them about whether this would work, but any advice would be gratefully received as i cannot be the only person that has had this problem but i cannot find any answers that work.
thanks
Julie

YOu can rebuild with Library Manager and this does not require a purchase:
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

Can't access my external hard drive on my new iMac

Hello All,
I just purchased a brand new iMac and am unable to access my Iomaga external hard drive. It's plugged in thru a usb port and the only way it pops up is if I unplug it from the outlet and plug it back in. When it shows up in the device list and I click on it to try and access my info, the computer gets hung up for a few minutes and then says the the drive was improperly ejected. The computer is running Mac OSX 10.7.2. I have a bunch of info on this drive that I need immediate access to. Thanks in advance for any help.
Alex-

It sounds like the hard drive is on its last leg. I would try my best to backup the data on the disk. Then find a replacement for it.
Allan

Transfering files and folders from an external hard drive to my new iMac Lion

I recently bought an iMac Lion and today attempted to transfer applications folders and files from my old computer( tiger) using migration assistant.I was though only partially succesful in as much as my applications and office files were copied, but not so iTunes, iPhoto and iMovies content .I then decided to attempt transfering the files and folders using my external hard disc(La Cie).I have activated Time machine and can certainly see the two partitions i had originally set up in my old computer but cannot figure out how I can the User Files which contain the media i want.? I originally used Super Duper to do my backups but its not recognised on this new computer so i am inclined to think I need to re buy it
Can someone please advise me? Thank you

I have found the files and made the transference succesfully except iMovie as i except they are not compatible with Lion

I have an external hard drive with my new iMac. I am trying to load Age of Empires III on the new computer. I am supposed to drag the icon onto my hard drive icon. Where is that?

New iMac and not a computer whiz. I have a new iMac with an external drive. I am trying to load an old Mac game on it. The Age of Empires icon tells me to drag it to the hard drive icon. Where is that? I have tried finder and launch pad. No luck.

Choose Computer from the Finder's Go menu and find the internal drive.
(82444)

External hard drive used for Time machine is full and having a hard time backing up. what should I do?

External hard drive used for Time Machine is full and having a hrad time backing up. What is my best option moving forward? NAS?

For All things Time Machine see Pondini's Excellent Infirmation here...
http://pondini.org/OSX/Home.html
Start with FAQs and Troubleshooting.

Trying to copy ANY file from my MacBook Pro to an external hard drive spins for 45 minutes then fails. I hate this computer and WISH I never would have wasted my money. Any ideas? WD My Passport 2TB Drive, had to buy a program to make the POS write

Trying to copy ANY file from my MacBook Pro to an external hard drive spins for 45 minutes then fails. I hate this computer and WISH I never would have wasted my money. Any ideas? WD My Passport 2TB Drive, had to buy a program to make the POS read files. Copies that would take seconds from a Windows based machine never complete. I have to close the transfer or shut off the machine half the time. Worst computer I have EVER owned, crashes non-stop, constantly freezes, and seems like EVERY operation is more complicated with this thing. Literally, my 1997 Compaq was FAR MORE reliable and user friendly.

This is one of the messages I keep getting; The Finder can’t complete the operation because some data in -- File Whatever -- can’t be read or written.(Error code -36)
I have copied things to the hard drive in the past, but it has always been incredibly slow, and now just seems to freeze and fail

Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

Hi, Can anyone recommended software to import dvd to iMovies. I need to import about a dozen homemade DVD's and edit them into a single DVD comprising the 'best bits'. How best can I do this. I have an external hard drive available for the job

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion or later:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion onwards, however MPEG Streamclip still needs it. See this:
http://support.apple.com/kb/HT3381
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. (The same applies to Mountain Lion even though that has it preinstalled.) You don't have to install QuickTime 7.

How to scan my computer and external hard drives for pictures with out importing duplicates.

how do i scan my computer and external hard drives for pictures with out importing duplicates.

iPhoto doesn't scan anywhere. It imports files offered to it. If it spots a duplicate it will warn you.

My iTunes appears to be installed on my laptop (25%) and external hard drive (75%). To get it all in 1 place is it simply a copy-paste exercise for the folders?

My iTunes appears to be installed on my laptop (25%) and external hard drive (75%). To get it all in 1 place is it simply a copy-paste exercise for the folders?

Most probably, you have a 'private'-folder = part of an AVCHD-structure on your root-level of that drive.
Put it back into its folder (or any folder) - done.
Don't rip AVCHD-folders apart!

Using IMOVIE '08 to import from DV camera to 'BUSLINK' external hard drive( formatted for MAC ) but no success and kept getting this message: The import was canceled. You may not have permission to write to /Volumes/BUSLINK/iMovie Events.localized. Thanx

Using IMOVIE '08 to import from DV camera to 'BUSLINK' external hard drive( formatted for MAC ) but no success and kept getting this message: The import was canceled. You may not have permission to write to /Volumes/BUSLINK/iMovie Events.localized. Thanx in advance!

I finally got a representative that was able to help me, she had me go to Get Info, by right clicking iMovie from the finder, and I had to click on Sharing & Permissions>Everyone>Read & Write

Backup internal and external hard drives-TC and offsite

I now have Mavericks 10.9.3 on my iMac with a 2TB (1.25 TB used) internal hard drive.
I also have some external drives attached to my iMac with older iPhoto libraries and other files (total file sizes 940 GB and 505 GB). I primarily use Aperture now on my internal hard drive, but still access those iPhoto libraries on my external drives on occasion. I have Time Machine backup my iMac internal hard drive on my 2TB Time Capsule regularly.
My primary question is in regards to getting another copy onto a larger external drive that covers my internal and external drives so I can have a backup off-site. Online backup services seem to always exclude external drives. So a physical drive I can have offsite seems to be the best option.
A year ago I changed the destination of my Time Machine backup to be on a 3TB external drive (backed up iMac internal hard drive and the two externals). However, when I changed the destination of the backup back to the Time Capsule, the TM initiated a brand new backup (it did not recall that I had backed up prior to that on my Time Capsule).
I want to backup monthly, if not quarterly for my off-site storage. But, if every time I change the destination drive for TM, a new backup profile is created, it will overwork my drives unnecessarily.
Is there a backup program or a process on "disk utility" I could run parallel to TM that I just use quarterly capturing only the changes/additions in those few months for both the internal and external hard drives? Also, is there a way to add an external drive to my Time Capsule that is solely used to wirelessly backup the two externals on a regular basis (i.e. keep the internal 2TB drive backing up to the Time Capsule; and the external hard drive attached to Time Capsule via USB used as the backup drive for the external hard drives)?
Summary: I need to backup regularly to the local Time Capsule/additional external hard drive. The data will come from my internal hard drive and my two external hard drives. I also want to do quarterly backups of the additions/changes to all three drives to have on an offsite external drive that I manually backup to quarterly. Any help is greatly appreciated.

Carbon Copy Cloner is not on the App store.
Correct.. it is not approved because Apple do not like the fact that CCC (and most likely superduper) which are the most popular backup software for Mac because it makes a bootable clone. Apple will never approve of that. But let me assure you that is the genius of it. If the internal disk fails, you simply boot from the external. It is $40 but you can use on all the computers in your home.
CCC is a clone.. ie when it does the backup, any changes on the drive are changed on the clone. It does not work like Time Machine which simply piles up incrementals until the drive fills up. The idea of CCC is a backup of the drive as it exists at any point in time. TM btw is also not a reliable archive, ie it thins backups constantly.. so you should never rely on it to archive old versions.. but in the middle of a project it does a good job to keep various versions of your files. That is why I specifically said in my last post do not stop using it.
and you can keep using the TC just for the internal drive.
Keep TM running to the TC.. that will then keep a current hourly incremental of your drive. You can set CCC in a way which is a lot more flexible. ie backup just at the end of the day. There is no need for constant hourly backups. So to answer the second question.. you are still using your TC and TM.. but I suggest you only backup the internal drive.
Please read a bit from forum expert Pondini on the value of clones and TM.
http://pondini.org/TM/Clones.html
That's why many folks use both Time Machine and a bootable clone, to have two separate, independent backups, with the advantages of both. If one fails, the other remains.
Now the ports issue.
You can of course continue to use USB2. Just that moving large volumes around will be slow.. as doubtless you already know.
On your particular Mac since you missed out on USB3 which is a pain.. you can buy a Thunderbolt to USB3 adapter like the belkin.
http://www.belkin.com/au/p/P-F4U055/
I suggested the Thunderbolt to Esata (it is an older interface and the adapter is rather cheaper but I hear more reliable.. check reviews for both).
http://store.apple.com/au/product/H8875ZM/A/lacie-esata-hub-thunderbolt-series
Sata is the interface of the hard disk.. Esata just means external sata.. so it is native and without conversion.
I was merely suggesting ways to speed things up. But as long as you don't run CCC on more than daily basis then I think you will be fine just with USB 2. It will take a while on the day you do the swap over for the archive volume, but if you turn off the power saving in the Mac and leave it run overnight it should be able to do most of it.. you need to realise it will have to deep scan both the disks.. to compare files.. but CCC is based on Rsync and it is extremely fast and efficient. I am just not sure I know how long it will take to do. Anyway.. there is a plan.. tweak and adapt as you see fits your needs.

I am trying to gather all of my music into one place, but it is scattered throughout my computer and external hard drive, how can I put it all in one folder and then create one library off of it?

My first problem is that I need to get all of my music files in one folder, they are scattered throughout my computer and external hard drive and I am trying to get them all together. Afterwards I want to send this music to my microsd hard in my Samsung Galaxy s4, is there a way to proceed through this? Or at least one part of it?

Consolidate your iTunes Library
As for the other part of the question, iTunes syncs with Apple devices.
Simply copy the media desired from the computer to the microSD card. This has nothing to do with iTunes.

Can time capsule back up an external hard drive attached to my imac and the iMac internal Harddrive

Can time capsule back up an external hard drive attached to my imac and the iMac internal Harddrive

In addition to Kappy's comments, the external drive must be formatted in Mac OS Extended (Journaled) in order for Time Machine to be able to back it up.

Audio interface and external hard drive config for new imac 21"

Similar Messages

Maybe you are looking for