Audio Interface that works for the new 10.6.7 Mac software?

I just bought a new Macbook Pro and I am having trouble finding an Audio Interface for recording vocals/guitars that will actually work!!  Most of these companies have not worked out the driver for them yet....Thanks

In addition to Stedman's spot-on reply --
When you buy an upgrade disk, all updates in that OS can be found on Software Update.
For instance, I bought Snow Leopard at 10.6.
All other updates have been free and downloadable.  So I'm not a 10.6.7.
10.4 (Tiger) went to 10.4.11.
10.5 (Leopard) went to 1.5.8
10.6(Snow Leopard) is currently at 10.6.7.
Now, when Lion come out (the next major upgrade of OSX), I will have to pay to go to 10.7.
After that, updates are free til 10.8 comes out.

Similar Messages

  • Fix that works for the new 21inch 27 inch Imacs Choppy Video Issue. ******

    I found the fix on the World of Warcraft forums. The problem is with Air Port. Disable Air Port and plug your computer directly into your Router. My games and video run great. I'm getting 60fps in World of Warcraft and all the flash videos work great. Its the best solution until they fix the issue.
    Message was edited by: Scrudd

    It sure did work... Hard wired to AirPort extreme, turned AirPort off and connected through Ethernet in network system preferences. Able to play videos from YouTube Hulu everywhere....Where is our update??

  • Mics and audio interfaces that work with Camera Connector

    FYI: After playing with the Camera Connector I have been able to connect USB recording gear for use with MultiTrack DAW app on the iPad. The Blue Yeti, Samson's GTrack and Roland's Cakewalk Audio Interface all work for inputting audio. All three have internal headphone jacks which work for monitoring both the input and multitrack recordings.
    One caveat with the Yeti: it appears to be almost at the limit of the power that the iPad's USB Camera Connnector can supply. Some headphones and earbuds shut down the mic. Sennheiser HD280 phones work fine, but some of the Sennheiser buds don't.

    It has been reported before that a lot of USB audio devices (e.g., headsets, microphones). As an example see:
    http://www.electronista.com/articles/10/04/24/ipad.has.native.usb.support.for.ma ny.devices/

  • Is there a blu-ray writer that works for the mac

    Is there a blu-ray writer that works for the iMac?

    The biggest problem is software, Toast Titanium 11 will work...
    http://eshop.macsales.com/shop/blu-ray

  • HT1414 is there a ios downgrade that works for the 4s?

    is there a downgrade that works for the iphone 4s from ios 6 to 5.1.1

    I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums, but you can use Google to find information on how to install an older version of iOS on any iDevice.

  • Any avi to mp4 programs that work on the new iMac DC?

    Handbrake doesn't work yet. Anybody find something that works in the meantime?
    Thanks.

    Wow, you guys and gals with the Core Duo might be interested to know that I believe Handbrake is not supporting the 2nd core. Why do i think that?
    All the quick tests below are MP4 @ 1000 kpbs.
    Here at work we have a Pentium M 1.7GHz, it's averaging about 36fps, a Core Duo averages around 38fps. Becuase the Core Duo is built of the Pentium M line I think it's safe to guess that the 2nd core is not even being used. Imagine Handbrake using the 2nd core.
    Now if I am wrong and Handbrake is indeed using the 2nd core, it's a sad day for us all.

  • Any Voice Recorders That work for the IPod Touch

    I have an IPod Touch and am starting school in august. Are there any voice recorders that work with the IPod touch? I know there are some that work with the others but any info would help! Thanks

    All ipod microphone adapters should work!

  • My iphone5 unlock button is not working. Can I get a new iphone 5 and then trade that in for the new iphone 5s?

    Exactly what the title says.
    My unlock button got to the point where it does not work literally 80% of the time. I've dealt with it throughout the past couple of months and I've been too lazy to lazy to go to the apple store.
    I was planning on visiting the apple store about this issue and I've been told that I would be able to receive a brand new iphone 5 as long as I'm still under the warranty. I purchased the iphone 5 last year sept 10 (pre-order) and got it on Sept 21 i think....so I'm not sure which date is when my warranty will be over.
    Is it possible if I can get a new iphone 5 and trade that in + the difference of iphone 5 and 5s and receive the 5s?
    Just wondering. If I cant, then I guess I will stick with the iphone 5 for another year.

    Hi jehims,
    You will only be able to get a replacement for the iPhone 5.....
    But sounds like you need to get to the Apple Store soon, like yesterday.....
    Cheers,
    GB

  • Computer Interface (That works) for Garage band?

    Hello All...I am new to G/B-I am wanting to record (sperate) tracks (at the same time) in G/B. I think 8 channels would be perfect, that way I can record varoius drums, a bass and a guitar at the same time. Then I can record other real instruments later, one at a time. I have seen a slew of computer interfaces to acomplish this task, however i would like to purchase one that (I know) (will work) well in garage band. Could any of you vetren G/B producers advise me as to what 8 channel audio interface you use with G/B (that works well) for you? And should it be a firewire or USB based one? I tried a friends (a 8 channel Behringer mixer with a USB, but i could get my mac to recongnize the mixer?
    Thanks so much for any response
    Steve

    I Use the PreSonus FireStudio Mobile. http://www.presonus.com/products/Detail.aspx?ProductId=58
    The FireStudio Project also works. http://www.presonus.com/products/Detail.aspx?ProductId=43
    If you have a FireWire input then use it for your interface rather than USB.
    Cheers

  • Audio interfaces that work well or poorly with Logic

    I know asking what everyone thinks is the best audio interface for Logic (Express or Pro - I currently have Express 8) is highly subjective. What I want to know is if anyone feels that certain interfaces work particularly well or particularly poorly with Logic. I'm mostly interested in firewire interfaces with 8 analog inputs under $600 (a la Motu 8 pre, Presonus Firestudio Project, Focusrite Saffire Pro 10, etc). Driver problems? Latency issues? etc?
    I'm new to Logic and home recording in general, so any help would be greatly appreciated!

    Hey,
    you said you are using Edirol FA-66 with Logic Express 8? i have the same set up but it will only record for 1:17 minutes before giving me a error message... "Logic Express: (-10005) Disk is too slow. (record)" and "Logic Express: (-10004) disk is too slow. (record)".
    i as you can see have a ultra fast and big HD with over 70GB free. nothing besides Logic is running to compensate for the low ram. and it doesnt matter what setting i use it gives me the error... by increasing the buffer it only lengthens the time before it gives me the error again... with the bigger buffer i can get 3:38 minutes out of it.
    i've called apple support and they couldnt help me... and thats with pro audio care. and i called edirol and they couldnt do anything but tell me to call apple again.
    my wife has a Core dueo Mac book Pro 2Ghz 2Gb ram and a slow 5400rpm HD with a lot of room too and i get the same error... using both external and internal HDs.
    i'm getting the same error with her computer as well as mine using Logic Express 8 and All Versions of GarageBand. I had a Demo of Ableton Live 6 and my edirol FA-66 worked fine recording with it.
    the problem is with recording and not with anything else.
    any help would be appreciated,
    Jordan

  • Encoding Audio - Solution that worked for me

    Hi all,
    As some of you may or may not have known, i was having trouble with my iDVD project hanging at the encoding audio stage for about 24 hours.
    Yesterday i decided to try out a suggestion that i had seen on another thread somewhere. Appologies as i cannot recall where i saw it. However it worked for me.
    This is what i did
    I saved my iMovie project as normal (containing 160 clips and 5 songs from my iTunes library) and then closed iMovie.
    I then opened up iDVD and chose 'new project'. I selected the theme i wanted, and then i opened up the 'DVD map' function. I then clicked the plus sumbol and chose 'add new movie'. I then opened up finder, browsed to my iMovie project file and dragged it into the tile i had just created.
    All the scene menus populated as it would have done if i had 'exported' to iDVD from iMovie. I then added some background pictures etc, and burnt the project to 'disc image'.
    The audio encoding part hung for about 2 hours as normal with the beach ball of death but i could see that the iDVD project file in finder was getting larger (a helpful tip that several of you taught me).
    Then the beachball dissapeared and the encoding bar began to fill up blue. And then the image was created.
    All in all it took 4 hours which, for a workaround is fine by me (although a fix would make me happier)
    So i think the trick was to not use the 'export/share to iDVD' option in iMovie.
    On a side note. This method also eradicated the audio lagging that i was experiencing before where the songs at the end of the project were suddenly 2 seconds behind the film when viewed in iDVD.
    I hope that this method works for others experiencing this frustrating problem.
    Kind regards
    LJ

    Hi M
    Thank You for stating an advice I often give as so many else does.
    Nice to see that it works for You to.
    And a good and well writted description !
    All Good Luck !
    Yours Bengt W

  • Slider bar that works for the iPad

    Hi guys
    Im not new to Edge however my knowledge of code is basic (Animation, basic functionality and design is my thing). My question is this, I have been able to use code so the bar in my example (LINK) is able to drag in a browser via
    using some code I found on a discussion on this forum, however my problem is that this doesn't translate onto the ipad.
    Please could I receive some direction in where to put this code wether it be on stage level or on the actual item level. The slide that managed to work on the browser
    was entered at stage level under 'compositionReady'
    Im guessing that I will need to introduce 'touchstart' 'touchend' 'touchmove' at some point in the process and again where to drop this in would be really appreciated.
    As you can see I have the relevant JS folder collected within the folder too.
    Once again thanks to anyone who can help and guide me
    Kind regards
    John

    Hi resdesign
    Thank you so much  for your guidance its been awesome. It works really well, the only small thing now is how to contain the slider as it can disappear
    now from view. I have noticed that in one of your links it does describe a containment value so the slider stays within a parameter/box.
    How would this instruction look and fit within the current code im using below
    var dragme = false;
    $(function () {
       var element = sym.$("Divider");
        element.mousedown(function() { dragme = true })
        $(document).mouseup(function() { dragme = false })
        $(document).mousemove(function(e) {
                if(dragme){
                    //Drag left side to the value of x.pageX (direction horizontal)
                    element.offset({
                    //top: e.pageY,
                    left: e.pageX
                //Or use css property values
                //element.css('left', e.pageX);
                //Drag right clip side to the value of x.pageX (direction horizontal)
                //clip values top, right, bottom, left
                var directionX = e.pageX - (clipper.offset().left);
                    clipper.css('clip','rect(927px '+directionX+'px 156px 0px)');
    thanks for any guidance or help you can give me

  • What is the best sound interface to use for the new Imac 27 inch

    I am going to purchase teh new iMac 27 inch and I wanted to know what is the best soundinterface to buy with a price range up to 300 -700 dollars

    Check out the M-Audio website, as well as Amazon for better pricing on M-audio interfaces
    http://www.m-audio.com/index.php?do=products.family&ID=recording

  • Audio INTERFACE that works with Garage Band??

    Any suggestions for a good inexpensive audio interface? Fast Track is awful.... Something about 250 or under?
    Want to plug guitar into device, device into MAC - and lay down tracks.

    ZoohGirl wrote:
    Do the second two in the top row work with Garage Band
    there isn't such a thing as "working with GB", if it works on a mac it will work with GB
    and ProTools?
    i know very little about protools, though they tend to be more proprietary
    can we plug them in (to guitar and MAC) and roll?
    yes
    Or is a mic needed??
    "needed", no. there are both 1/4" as well as XLR jacks, as you can see in the pics. you can use either.

  • A Financial Management App that works for the UK??

    I've been running a MacBook Pro for some five years and have also used a Parallels partition to run some legacy Windows programs such as Quicken Deluxe 2000!
    I am now determined to dump the Parallels partition and now need a money management app that runs under Yosemite and is suitable for a UK user - we cannot (easily) buy the US/Canada Quicken software anymore - so I need a package that will run UK£ and can handle multiple accounts but I do not need any stock market look up capability etc.
    Yours hopefully,
                   george                   

    I ran Quicken Deluxe 2002 for years and now I use Quicken 2007 for Mac, since it is now compatible with Snow Leopard through Yosemite.
    You can obtain it for $15 using the Intuit online chat function, and I assume they will sell and ship to the UK.  Try it:
    Use the chat feature for Quicken for Mac: Quicken 2007 for Lion: Shopping and Buying: Buying Quicken on this page:
    https://quicken.custhelp.com/app/contact/plvl1/win
    Since you are using Quicken Deluxe 2000 you first need to convert the data files while still running in Tiger/Leopard/Snow Leopard:
    Download Quicken 2006 (PPC) from Intuit:
    https://quicken.intuit.com/support/help/patching/quicken-2006-manual-updates--ma c-/GEN82200.html
    Open your data file in Quicken 2006 (PPC) and it will automatically convert it to Quicken 2005/6/7 data file. 
    NOTE: I know this procedure worked for my Quicken Deluxe 2002 data files, I have not personally tried it on a Quicken Deluxe 2000 data file.

Maybe you are looking for