Audio is cut off when I make a dissolve

I often will expand a clip to "lengthen" the audio portion so I can fade in the sound slightly before the video is seen. But then, if I want to create a video dissolve, my audio fade is ruined because creating that dissolve will only allow the audio portion of the clip to be as long as the video. How can I solve this?
Thank you!

I'm not seeing that. I get this

Similar Messages

  • Beginning of audio cut off when using digital optical out

    Hi all,
    This is my first post here since switching to Mac earlier this year.
    I'm having problems with the first second or so of audio being cut off when commencing playback using the Mac's digital optical out.  This happens with any source of audio in a variety of different applications (e.g. video, iTunes, even system sounds for notifications and the like).   I have used a mini Toslink to Toslink optical cable to connect from the Mac's audio out jack to the receiver of my digital speakers (Logitech Z906).  Once playback has commenced, audio plays fine; it's just the very first second or so which is usually clipped.
    The problem does NOT happen when using the built-in speakers.  I've also noticed that if I unplug the cable from the receiver end (leaving it connected at the Mac end) I can see the red LED light shining the optical signal down the cable, but this goes out exactly 30 seconds after audio stops playing.  If I start another audio playback within 30 seconds, there is no loss of audio at the beginning, but if I wait longer than 30 seconds (i.e. after the LED has gone out) I encounter the problems with the initial audio being clipped.   I therefore suspect that this is an OS issue which is shutting down the digital optical out when audio is not actually playing (presumably to save power or something).  I wouldn't have a problem with this if it actually worked properly when audio playback recommences, but it seems that there is a slight delay whilst the optical out service 'wakes up' again and this is leading to the clipped audio.
    I've done some searching of the internet (and these support communities) for this problem and there seems to be little information about it.  It does seem to affect a few other people though and some have resorted to third party applications or scripts which play silent audio at regular intervals to keep the optical output running permanently (e.g. SoundStay (https://www.macupdate.com/app/mac/39833/soundstay) - no longer maintained and the download link is dead).  However, these amount to a kludge at best which treat the symptoms rather than the underlying cause, which I would rather resolve.
    I tried to log a support case with Apple in order to have them call me, only to have the system tell me that my support has already expired, despite having purchased the Mac only 4 months ago.  It seems that my Apple One-Year Limited Warranty is actually only 90 days when it comes to telephone support.  So here I am! 
    Does anyone else have this problem with optical out, and how can I resolve this?  Any help would be gratefully appreciated.
    Thank you.

    Hello kcore66,
    Would it be possible for you to upload one of the files in
    question so that I can take a look. In Captivate 1.01 there is an
    intermittent problem where sometimes the audio is either cut off or
    just doesn't play when you publish / preview. To get around this
    simply moving the audio object back and forth along the timeline
    and then positioning it back in it's original position works 9
    times out of 10.
    HTH
    Regards,
    Mark

  • Audio randomly cutting off on T410

    I have a Thinkpad T410 and the audio randomly shuts on and off all the time. It never cuts off when there are headphones or speakers attached and when it does it can easily be turned on for a short period of time by hitting the volume button - sometimes up and sometimes it has to be the down. This makes me think it is some sort of software and not hardware or short in the computer. I have tried to reinstall all the audio and that doesn't work and have run several performance scans from Lenovo and diagnostic tools and nothing comes up. Any advice?

    My speakers will kick back on if I press the mute button, either up or down volume, or click the mute bottom from the sound window.
    The Hotkey software is made of the System Interface Drive (1.02)r, the On Screen Display (6.10.01), the Fullscreen Magnifier (2.15), and the Auto Scroll utility(1.0).  I had a spare HD, so I installed it and used my Lenovo recovery disks to get my laptop back to the state from when I first got it. The versions for Hotkey are listed above. On my original HD, I updated to the latest Hotkey software and still had the problem.
    I was originally thinking this was a software issue but now am leaning toward a hardware issue. I did have to send this laptop to Lenovo in May 2011 under warranty because the left speaker crackled and went out. It worked fine when it came back up until 3-4 months ago. I've ordered some new speakers from ebay and will install them to see if that fixes the problem. I found lots of hits from "W" thinkpad owners where the left speaker wire was placed on top of the heat sync and was being shorted out, but haven't seen any "T" owners reporting that.
    I'll post an update after I replace the speakers.

  • Titles get cut off when playing after the burn

    The title created in the movie are too wide and get cut off when playing it in a DVD player into a TV. Is there a setting I should use before burning?
    Any help is appreciated.

    You should turn on the TV Safe Area and make sure that everything that you care about is within this area. Anything outside the area is subject to the over-scan of TV sets.

  • Captivate 5: Audio is cut-off at the end of the published file

    Hi,
    I'm using Captivate 5. I published my projects to Flash 10 (SWF/HTM) format and the audio is always cut-off at the end. For example, if my last slide has this audio "Thank you for time and have a good day.", what you will hear is only "Thank you for your ti" or "Thank you for your time and have". This only happens on the published file. The audio is not cut-off when you preview the project.
    Here are additional observations:
    -> If I published with playback controls, the audio is cut-off the first time i view the output; however, the second time I view the output or if I drag the playhead, the audio is no longer cut-off. The timing of the elements (mouse, highlights, audio, etc.) is also way better when I view it the second time versus the first time.
    -> If I published without playback controls, the audio is always cut-off no matter how many times I view the flash file.
    -> I have tested publishing to Flash with different # of slides (10 slides, 50 slides, 100 slides) and the result is the same. So I don't think it has something to do with the number of slides.
    > Note also that the last slide has enough audio to match the slide's length. So I don't know why it's cut-off.
    Thank you in advance for your assistance.
    Regards,
    Rose

    Hi MagicBBB,
    A patch to address this issue is available. Check for updates from the application through Help >> Updates.
    Also have a look at the release notes here. http://kb2.adobe.com/cps/881/cpsid_88142.html
    Please try out the patch and let me know.
    Thanks,
    Ashwin Bharghav B
    Adobe Captivate Team

  • Why iphone centre in malaysia always get cut off when i call.

    i always get cut off when i call iphone centre on malaysia,
    need explaination from centre.

    so why are you asking us users?  That makes absolutely no sense at all.

  • IM names cut off when using larger font

    I switched my IM windows to use a 12pt font instead of the default 10pt font. Now it cuts off the bottom half of all that names. But hey, at least I'm still wasting 50% of my screen real estate on whitespace and bubbles! 

    read about it here
    Characters become cut off when font size is set larger than 8 on the BlackBerry 10 smartphone   
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Text getting cut off when printing to PDF from Excel

    Hello,
         I've seen a lot related to this subject but nothing that shows a real solution.
         Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
         It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
         Any assistance is appreciated.
    Thanks,
    Kevin Murphy

    please delete me from your mailing list.  tks.
    Date: Wed, 10 Feb 2010 11:20:28 -0700
    From: [email protected]
    To: [email protected]
    Subject: Text getting cut off when printing to PDF from Excel
    Hello,
         I've seen a lot related to this subject but nothing that shows a real solution.
         Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
         It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
         Any assistance is appreciated.
    Thanks,
    Kevin Murphy
    >

  • Characters are cut off when they don't fit in the pdf report output.

    Hi All,
    I understand that Forms 6i and Oracle 9 iAS have been de-supported for years. Meanwhile we do still run a small application in the 9 iAS environment.
    We have forms and reports running on Windows 2000 server, I am able to successfully clone the same 9 iAS from Windows 2000 to a Virtual Server Windows 2003 x32 and all runs fine, the only problem is that the fonts in the pdf reports are larger in the new Windows 2003 environment as compared to the original Windows 2000 and characters are cut off when they don't fit in the pdf report output in 2003 env.
    Any advice is most appreciated.
    Thanks.

    You may want to check on the printer driver and paper size selected

  • Bottom margin gets cut off when I try to print

    bottom margin gets cut off when I try to print

    Not being able to check it out on Pages 5 I have tosay how it works in Pages 4 (09). When Show Layout is checked/on you should see a grey border which is the area that the printer can't print on. Do you see a grey boder in your Pages 5?
    If you need a smaller margin on your document than the printer seems being able to do check if you don't hae a "borderless" option for the paper sizr you use. You check it in File > Page Setup
    Also go to HP and check if there is a newer printer driver if yours has some years on it.
    I hope this will help you

  • I have layed out a site with 2 rectangles (one on top of the other) in the footer and the one is being cut off when I publish the site

    The depth of the rectangle is fine when I view in muse but only cuts off when published

    Hello,
    Issue is because of the text box in the middle of the rectangle (In MAIN Master page), Please increase its width and then try to preview it.
    Please take a look at the screenshot. I increased it to 311 px and its working form me.
    Please take a look at the screenshot for better understanding.
    Regards
    Vivek

  • Re: Broadband cutting off when calls come through ...

    My broadband cuts off when my phone rings, did not always happen only in the last 6 months

    Welcome to this customer to customer forum.
    To enable forum members to help you, could you please read the web page that is shown below, which asks you to do a few checks first, and has some helpful hints.
    When you have done that, please follow the instructions at the end, and post the results here, so members can offer advice. Thank you.
    Speed and disconnections
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Toshiba Portege S100-S1133 Laptop - Intenet (Cable or Wireless) cuts off when phone rings

    Toshiba Portege S100-S1133 Laptop, Intel(R) Pentium(R) M, processor 1.73GHz 795MHz, 512 MB of RAM.  Internet (cable or wireless - COMCAST service) cuts off when the house phone (AT&T service) rings.  The HP Laptop in the house doesn't have this problem.  COMCAST can't fix the problem.

    The only way to fix the problem entirely is to not have any 2.4GHz cordless phones in the house. You can try to change the wireless channel on your router but it probably won't be far enough from the 2.4GHz phones to help. I assume when you say it shares internet you mean that your home computer is connected in the back with ethernet and that is why the internet stays up on it. Your MBP connects wirelessly so it disconnects when the phone is in use.
    Go to 192.168.1.1. Log in by leaving username blank and password is admin. [Follow these instructions|http://www.tutorial5.com/content/view/155/79> to change anything you need to (such as if you have unsecured wireless). Click wireless and under basic wireless settings you probably have channel 6 by default. Try channel 1. (Though you can also get into problems with wireless networks of neighbors interfering so download [Airport Radar|http://www.apple.com/downloads/dashboard/networking_security/airportradar .html] and try to avoid channels that are nearby).
    As I said the only solution is not using 2.4GHz phones.

  • Does the battery charging in the macbook pro retina automatically cut off when the battery is fully charged?

    Does the battery charging in the macbook pro retina automatically cut off when the battery is fully charged? or does it continue charging?In which case,is it better for the battery life to switch off the power supply or leave it on while using the macbook?

    Yes, and the pilot light on the MagSafe2 connector changes from orange to green. If you unplug, you will start draining the battery again, whereas if plugged the Mac will take power from the brick and leave the battery in a charged state.

  • Phone Cuts Off When Answered And Can Not Make Outg...

    Problem only stared today,and BT Infinity is working fine.On incoming calls the phone rings and when answered it cuts off.
    When we try to dial out we have a dial tone ok and it dials the number then we get the message 'This number can not be recognized' and we have tried about 10 numbers.

    Do you have the phone plugged into the bottom socket of the master socket?
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Maybe you are looking for