Audio is muted in Premiere Pro CC 2014

I've been working on a couple of projects over the past week in PPro CC2014 with no problems, and yesterday the audio was completely mute when I opened one of them. There were no levels/signal showing up in the audio meters. I re booted PPro and all was well. It later happened on a different project. Today I've opened them and even upon re boot, project 1's audio is mute and project 2's will go on and off with each re boot. I tried a new project and it's audio is mute also. Any suggestions?
Message was edited by: Kevin Monahan. Title was too long.

today i opened my session and have no audio at all in my PPRO CC2014 project. I do however have meter levels from the timeline just no sound. I've tried everything i can think of but no sound. I've been searching all day for answers but with no help

Similar Messages

  • Audio-Problem with Adobe Premiere Pro CC 2014 by using long Clips in AVC-Intra Codec (4Gb Border)

    Hello
    We own a Panasonic camera (AJ-PX5000G) and we film in 1080p50 with the AVC-Intra100 Codec. When importing longer clips in Premiere Pro, the video is fully loaded, but the waveform of the sound ends at the Time Code 00:02:28:35.
    Sometimes the sound could be played after this Timecode but otherwise there is no audio. Even if we use the same clip several times we see that it works sometimes and sometimes not. It looks random.
    We also tried to import the Clips with Adobe Prelude directly from the P2-Card but there are the same problems.
    The Clips in 1080p50 AVC-Intra100 have a bitrate of 227Mbps. After 2 Minutes and 28 Seconds 4Gb are written on the P2-Card and the Camera starts a new picture file and 4 sound files..
    It looks like Adobe Premiere Pro has problems with the correct relation of the files that all get together to one clip.
    Is there anybody who can confirm this problem? Can anybody help me with this Premiere Problem?
    Dennis
    (Workstation:  Dell Precision T3600, Intel Xeon E5-1620 @ 3.60 GHz, 16 GB RAM, Windows 7 Professional 64-bit, Service Pack 1, Premiere Pro CC 2014.1 (Build 8.1.0)   )
    Mediainfo of the P2-Cards:
    General
    Complete name                            : \CONTENTS\VIDEO\0068T7.MXF
    Format                                   : MXF
    Format profile                           : OP-Atom
    Format settings                          : Closed / Complete
    File size                                : 3.92 GiB
    Duration                                 : 2mn 28s
    Overall bit rate                         : 227 Mbps
    Encoded date                             : 2014-10-15 13:33:41.000
    Writing application                      : Panasonic P2 2.0
    Writing library                          : Panasonic P2 2.0
    Video
    ID                                       : 2
    Format                                   : AVC
    Format/Info                              : Advanced Video Codec
    Format profile                           : High 4:2:[email protected]
    Format settings, CABAC                   : No
    Format settings, GOP                     : N=1
    Format settings, wrapping mode           : Clip
    Codec ID                                 : 0D01030102106002-0401020201323104
    Duration                                 : 2mn 28s
    Bit rate                                 : 227 Mbps
    Width                                    : 1 920 pixels
    Height                                   : 1 080 pixels
    Display aspect ratio                     : 16:9
    Frame rate                               : 50.000 fps
    Standard                                 : Component
    Color space                              : YUV
    Chroma subsampling                       : 4:2:2
    Bit depth                                : 10 bits
    Scan type                                : Progressive
    Bits/(Pixel*Frame)                       : 2.193
    Stream size                              : 3.92 GiB (100%)
    Color primaries                          : BT.709
    Transfer characteristics                 : BT.709
    Matrix coefficients                      : BT.709
    Mediainfo Audio-Datei P2-Card:
    General
    Complete name                            : \CONTENTS\AUDIO\0068T700.MXF
    Format                                   : MXF
    Format profile                           : OP-Atom
    Format settings                          : Closed / Complete
    File size                                : 13.6 MiB
    Duration                                 : 2mn 28s
    Overall bit rate mode                    : Constant
    Overall bit rate                         : 770 Kbps
    Encoded date                             : 2014-10-15 13:33:41.000
    Writing application                      : Panasonic P2 2.0
    Writing library                          : Panasonic P2 2.0
    Audio
    ID                                       : 3
    Format                                   : PCM
    Format settings, Endianness              : Little
    Format settings, wrapping mode           : Clip (AES)
    Codec ID                                 : 0D01030102060400
    Duration                                 : 2mn 28s
    Bit rate mode                            : Constant
    Bit rate                                 : 768 Kbps
    Channel(s)                               : 1 channel
    Sampling rate                            : 48.0 KHz
    Bit depth                                : 16 bits
    Stream size                              : 13.6 MiB (100%)

    Hi,
    we have the same problem!
    It is not possible to play audio with the AVC-Intra100 Codec fluently.
    Can anybody help?
    Thanks,
    Anja

  • Audio rendering problems in Premiere Pro CC 2014

    Hi
    I'm rendering a very small project in Premiere Pro (just some cut and music). I tried to render it in H.264 but when I open it in windows media player there is no audio, when I copy it to my mobile phone I can't hear the audio neither. When I import the rendered file into premiere I can see the audio waveform. When I render the project in mpeg I can here the audio and when I clik the "match sequence settings" button I can hear it to (AVI) but I need H.264. What is the problem or what am I doing wrong.
    Thanks in Advance
    Michiel

    Windows Media Player sucks.  That's about the best 'why' I have for that.
    I don't own a smart phone, so I can't help with that one.  (I'm one of those old fashioned types who only uses a phone to make phone calls, and the proper tool for all the other activities the 'phone' has co-opted lately - like a computer for playing back computer media files. )

  • Can't Move Audio Clips in Timeline After Expanding to View Waveforms (Premiere Pro CC 2014.2)

    So, this seems to be a bit of a weird one, and I'd be pretty stoked if it ended up being something silly that I'm doing wrong, but I can't for the life of me figure out what that might be.
    As the title suggests, I can't use the mouse to move some audio clips in a timeline once I expand the track to view the waveforms. This appears to only happen with independent audio clips (WAV. AIFF, MP3, etc), and not with clips attached to video. Also, it's worth noting that I don't have track keyframes turned on. I was hoping that was it, but it wasn't.
    So, what happens is this:
    1) I drag an audio clip down to the timeline (I can drag it onto an existing track, or drag to the bottom of the sequence and create a new track. Neither option seems to get a different result.).
    2) So long as the track isn't expanded and the waveform isn't visible, I can move the clip left, right, or up and down to a different track.
    3) As soon as I expand the track to view the waveform this functionality goes out the window. When this issue happens I can use the keyboard to nudge left and right, but that's about all the movement I have.
    4) It's almost as though the track becomes corrupt. The lanes for the track don't redraw properly, and the track is pretty much unusable. I can't put anything into it, and I can't take anything out. All I can do is delete the track and start again.
    Complicating issues is that this doesn't always happen, but instead is one of those "vast majority of the time" issues. I can't see any rhyme or reason for why it works or doesn't. I seem to do the exact same thing, but occasionally get different results. It doesn't matter what type of file I'm using (WAV, AIFF, etc), and this only happens with independent audio clips.
    Once again, I don't have track keyframing turned on when this happens. Believe me, I wish that was it.
    I have already filed a couple of bug reports about this over the last month or so, but haven't heard anything yet. I was wondering if anyone else was having the same issue, and if so, whether they had any workarounds.
    Mandatory system info:
    Windows 7 Professional SP1 (64-Bit)
    Intel i7-3820
    32GB RAM
    Nvidia GTX 980 (350.12)
    Premiere Pro CC 2014.2

    Update:
    I was just looking to post a screenshot of the timeline when I discovered something interesting. As soon as I use the vertical scroll bar to the right of the sequence, the tracks start to work again. Close off the waveform and the clip goes haywire. Move the scroll bar a tiny bit (or a lot), and suddenly the clip starts working.
    Pretty bizarre.
    The good news is that for the time being that could be a workaround, though it would be great for this to not happen at all.

  • Why is Dynamic Link between Premiere Pro CC 2014 and After Effects CC 2014 not syncing audio changes?

    When I try to use a Dyamic Link between something I've cut in Premiere and a composition in After Effects, if it is simply an audio level change it will not update in AE.  Only if I alter the Video track does it then take the changes reflected.  Any suggestions as to what is causing this?
    Running Adobe Premiere Pro CC 2014 and After Effects CC 2014.

    As Dave alludes, AfterEffects is all about the visual changes ... or at least, mostly. For changes to the audio outside of PrPro's internal controls, highly suggested you use Audition instead. It is all about the sound ... and yes, will update PrPro when used correctly.
    Neil

  • When clicking an audio clip on the timeline in Premiere Pro CC 2014, it duplicates it on a different track and makes it impossible to work.

    I'm experiencing a disturbing issue as it actually prevents me to do the work in Premiere. I will put as much info as possible:
    1) Project started on a different computer (the editor), PC with Premiere Pro CC,
    2) Now opened on my Imac with Premiere Pro CC 2014,
    3) I am not editing, simply trying to move audio clips on different tracks to export audio tracks only,
    THE ISSUE:
    1) Here is my timeline:
    2) When I select an audio clip to highlight it, Premiere creates a duplicate on a different track:
    Note that the clip highlighted in the previous screen cap is the duplicate and I didn't click it, Premiere highlights it as soon as it is duplicated.
    3) When I click out of the timeline or scroll up or down on the timeline, the duplicates disappear. However, when I try to move the original clips, it doesn't do anything, they are stuck in place.
    ANTICIPATED ANSWERS:
    1) You work on 2 different computers with 2 different versions of Premiere Pro CC, what do you expect? --> The amazing thing about Adobe CC is that it shouldn't be an issue and now I have to deal with it in this way,
    2) Try and save an updated version of your project from your computer. --> Already done that.
    Thank you for your help. I usually use the customer support chat but I am on the other side of the globe and it is now closed. This issue prevents me to work so I need to solve it quickly.
    Kind regards,
    Aurelien

    This sounds to me like it could be a graphics related problem are you on the latest driver. Something else you could try, start a new project and import the one from the PC into that rather than directly opening it in the MAC

  • Premiere pro CC (2014) problems with audio on .mts files

    Hi,
    This is a recent problem I have been having when trying to play certain clips in Premiere Pro CC (2014), I import the entire private folder and some of the clips play as normal and others seem to have skipping audio. This causes the second half of the clip to not have any audio in it at all because it is bunched up at the beginning. I don't even know where to start with trying to fix the problem, the only thing I have done is re import the files and put them in new folders to change the destination it has been imported from.
    Any advice would be extremely helpful as it is mostly stopping me from getting on with any work,
    Thanks!

    Hi amber1992,
    I will suggest you to go ahead and clean the Media cache and Media cache files folders manually.
    MAC OS: Click on Go menu>Go to Folders>type ~/Library and click ok. This will open User Library folder and then navigate to Application Support>Adobe>Common>Media Cache and Media Cache files. Delete all the files from these folders.
    Windows: C:\Users\username\AppData\Roaming\Adobe\Common or you can Click on Start button and in search type %appdata% and open Roaming folder>Adobe>Common>Media Cache and Media Cache files.
    Once done launch the project again and check.
    Regards,
    Vinay

  • Premiere Pro CC 2014 QuickTime Audio and Video Syncing problem

    Hi everyone,
    I am having and issue when I import QuickTime video into Premiere Pro CC 2014. I've just started doing some editing so I am very new to all of this. I recorded video in Photo Booth on my mac. I exported the file to a .mov file and imported it in to Premiere. When I play the file in premiere everything is fine up until halfway through the video. The video starts to play faster than the audio and everything is off. When I play the video in QuickTime everything is fine. I don't know if I did something wrong when I imported the file but I am hoping for some help. Thank you.

    I would be willing to bet the video is recorded as VFR, variable frame rate ... in other words, it creates more frames per second when it needs to for keeping up with screen changes, and less when it doesn't see much changing on your screen. This saves bandwidth of course, BUT ... PrPro is not setup to work well with VFR footage, it really needs CFR, constant FR. So ... highly recommended if your capture program doesn't allow setting CFR is the free program "Handbrake", which you can google for. Use that to convert the footage to CFR, then import that into PrPro.
    Neil

  • Premiere Pro CC 2014 - audio frame repeating while scrubbing

    In 2014 and CC, I often run into an issue where an audio frame will repeat while scrubbing.  It stops when I hit play or move the cursor to another part of the timeline.  Obviously, this makes audio editing a nightmare.  I've checked all the settings and I'm at a complete loss.  I've unchecked "maintain pitch while shuttling", but the problem persists.  Is there something I'm missing?
    I've searched the forum, but haven't found any answers.  Any info would be greatly appreciated.
    Premiere Pro CC 2014 (8.0.1)
    Mac OSX 10.9.5
    2 x 2.4 Quad-Core Intel Xeon
    24 GB 1066 MHz DDR3
    NVIDIA GeForce GTX 680 2048 MB
    KONA LHe+ (5/14/13 firmware)
    ProRes LT (.mov)
    No third party codecs

    Apparently this only happens when holding down the next or previous frame keys.  Individual clicks don't seem to cause the repeated frame.

  • Audio Gain Crash - Premiere Pro CC 2014

    Working in Premiere Pro CC 2014 I'm experiencing an instant crash when using the Audio Gain function on a clip or any selection of multiple clips in a sequence.  The clip(s) in question come from a TASCAM DR-100 audio recorder I've used dozens of times without issue.
    ASUS G75
    Windows 7, 64-bit
    Intel i7-3630qm
    16GB RAM
    NVIDIA GTX-670MX

    I found it strange that this was happening only on two of my sequences (timelines) in the project, while other sequences have no issue with Audio Gain.  It's either the sequence, or one-or-more clips—not Premiere, right?  First, I ran CCleaner and re-launched Premiere.  Clearing system crud with CCleaner seems to have aleviated the problem for *some* of the clips.  I could now perform Audio Gain functions on some of the clips.
    So my next thought:  Clean the Media Cache in Premiere.  I tried that next.  When I re-launched Premiere and the conform process begain to do it's thing, building new files.  When it was done, ALL of my clips could be selected and Audio Gain performed.  SUCCESS!  The answer to Audio Gain crashing Premiere Pro, in my case, was to clean the media cache.
    Interestingly, that's not the end of the story; there's still some funky issue with one single audio clip in this sequence.  But since the Audio Gain crash isn't happening anymore, I'll present the new issue in a new thread.

  • Adobe Premiere Pro CC 2014 Crashing very often! Please Help!

    Hello,
    I am currently editing my first feature on Adobe Premiere Pro CC 2014 and it is currently up to date.
    I am editing on a iMac 27in, late 2013 brand new computer.
    Processor: 3.5 GHz Intel Core i7
    Memory 32GB 1600 MHz DDR3
    Graphics: NVIDIA GeForce GTX 780M 4096MB
    System: OSX Yosemite V 10.10.1
    The project is located on a 8TB G Drive
    7200 RPM
    High Performance ThunderBolt drive.
    Details of the project:
    I am currently working on a fine cut of 5K Red Footage that is being cut in the RAW.
    I work at 1/2 quality settings and have no lag.
    The timeline includes limited stacked video files and various mp3 audio files.
    The Problem:
    Lately, the program will randomly quit or freeze up 4-5 times during an 5-6 hour edit session.
    Many times it is random, however, it seems to happen often if I accidentally click on the end of a clip on the timeline and it goes to switch into trimming mode. 
    Also, it will randomly go into the "pinwheel of death" out of nowhere followed by "Adobe CC is not responding."
    My project file is just about 15MB now.
    What is causing this reoccurring problem?
    How can I make it happen less?  I have scoured the forums and found similar articles but no helpful solutions.
    I have recently turned auto save on to save every 2 minutes because there have been more than one occasion where I lost A LOT of work because of this issue.
    I am about two weeks out from picture lock delivery and this issue is driving me crazy and loosing me a ton of time.
    Please help or let me know if any more additional information can help solve the issue.
    I have sent in well over 25 error reports already.
    Thanks,
    Thomas.

    I think I may have found the solution...
    I completely removed the Premiere Pro folder under User > Documents > Adobe and so far it seems to have solved the problem.
    I of course backed up my projects and than deleted this folder. So far it seems it worked.
    I'll know for sure in a day or two, but after constantly crashing, Premiere hasn't crashed for the last 4-5 hours of work.
    Goran

  • Exporting to Media Encoder crashes Premiere Pro CC 2014

    Greetings,
    I am experiencing a problem with premiere off and on. Right now it is an on problem. When I am exporting from Premiere Pro CC (and CC 2014) it will intermittently crash Premiere. I have tried this with several different audio and video formats (AVI [Lagarith and uncompressed], WAV, H.264, MPG2, AAC, etc). At the moment, every time I go to export to queue it locks up and hangs on the "Preparing data for export..." Media Encoder Launches and then it just freezes. I get "Problem Even Name: AppHangB1" over and over. Sometimes a full restart will fix this temporarily and sometimes it goes away for a long while. I managed to get a few sequences exported and then it just kept freezing on every PP CC restart.
    Here are my system specs:
    Premiere Pro CC (up to date)
    Win 7 64bit (up to date)
    i7 970
    24GB Ram
    NVIDIA 470GTX (driver up to date)
    3 x 1.5TB internal
    4TB internal
    3TB internal
    12TB RAID 5 via USB 3.0
    USB 2.0 and 3.0 drives
    FireWire audio device (M-AUDIO FireWire1814)... although, I am not using it for playback. It is connected.
    Footage is from C100 H.264 .MTS, H.264.mov from 7D, and H.264 .MOV from iPhone.
    All stock video plugins with a few third party audio plugs.
    This problem happens with and without third party plugs, but it happens that this project uses them.
    I have chatted with Adobe help twice about the matter and nothing has come of it. Log out, log in = same. Restart = same (sometimes), create new user account = same, and so on. The only thing I haven't done is completely re-install premiere, which seems a bit overkill. One of the reps said he would get back to me in a few days after he watched the issue via screen share. Never heard back.
    I get the sense that this has something to do with PProHeadless.exe not launching or not running properly. When the crash happens on a fresh restart of PP CC 2014 PProHeadless is not running. I can start PProHeadless and it will send sequence to media encoder. When I try to export another sequence from the same project it crashes and I see another instance of PProHeadless launched.
    Also, once the projects are exported to Media Encoder, I can encode them to any format with no problem. The problem is getting the sequences there!
    Is there anything that I am overlooking here?
    Thanks for the help!

    Hi
    Premiere pro cc 2014  8.0.1 (21) build
    Encoder CC 2014 8.0.1.48
    I use CC for Teams so it updates all the time.
    Again when I tried to use it today by letting premiere open it by sending an output into Queue it crashed both Encoder and Premiere.
    In order to shut down Encoder and Premiere I had to go into Task Manager and "End Process Tree" on everything adobe I could find because just ending Encoder did not work it would not close. I remembered that years ago when Premiere would crash we had to end a photoshop process. I found photoshop open even though it was not "alive" on my task bar. I had used it yesterday but had closed it. I also had to close dynamiclinkmanager.exe *32 as well as one of the three Adobe CDF Helper.exe*32. They popped back on but Encode closed and then I got a message that Premiere needed to close and did when I clicked the button to let it close.
    After all this I re-opened Encoder by itself and checked the Preferences finding that Import Sequences Natively option was again checked.
    By the way for me, "Launch AME manually, then drag the sequence from PPro's Project panel to AME's Queue (or to a preset in the Preset Browser). That uses a different code path than the File>Export>Media workflow." won't work most of the time because I do live events of panel interviews that may run 2 or more hours. I need to break them down to chapters for the web
    Also I know this isn't part of this problem but I and many others would still love dynamiclink to work to Encore because the DVD is not dead yet. The current work path is a drag.
    Looks like some programers and engineers have some work to do.
    Thanks
    Dennis
    My computer:
    Self built PC windows 7 Professional 64 bit Build 7601 SP 1 I use auto update so it is up to date.
    ASUS P6x58D Premium Motherboard
    Intel (R) Core i7 930 @ 2.80 Ghz
    Installed Memory  12 GB
    NVIDIA GeForce 9500 GT
    NVIDIA GeForce GTX 580
    2 Apple Monitors and a HP full HD Monitor
    With a BlackMagic Intensity Pro Capture Card

  • Adobe Premiere Pro CC 2014.2 (8.2) freezes up constantly on Mac OS X Yosemite

    After the latest update (no idea which one but the latest update) Premiere Pro cc just keeps freezing up constantly. There's no indication what brings it up but after different periods of time I just get the apple wheel and the entire program freezes up. I force quit and get the "sorry, a serious problem has occured", blabla. Sometimes it's in the middle of cutting a clip, sometimes it's while trimming. There isn't a single indication what causes it. At first I thought it was only because of using a multicam clip, but that's not the case anymore. I tried reducing memory to other apps, deleting preview files, deleting autosaves, turning off autosave altogether, deleting Adobe Premiere 8.0 preference file, changing permissions, basically everything in this post: Re: Adobe Premiere Pro CC keeps crashing... (Which now also seems totally neglected by Adobe).
    Believe me, there's hardly a thing I haven't tried.
    It's getting REALLY frustrating now and it's time something is done about this. Yes I know, "don't just say it's frustrating, explain the problem", but that fase has passed now. I'm paying for this product and it needs to work like it should.
    Also I know I'm not the only one who's having these problems.
    My specs are:
    OS X Yosemite 10.10.1
    MacBook Pro (Retina, Mid 2012)
    2,3 GHz Intel Core i7
    16 GB 1600 MHz DDR3
    NVIDIA GeForce GT 650M 1024 MB

    Hi JJ,
    JJ Millen wrote:
    It is not about the past times you may or may not have participated, but about the latest message from rob654 and my last messages in that thread (which are clearly not about Windows).
    One great reason to get a Mac only version of the post. It is never a good idea to post on a Windows post with Mac problems. And when threads get so long and unruly, the team can't focus on the actual issue so it doesn't get the attention it needs.
    Now that we have that sorted out...
    JJ Millen wrote:
    I checked that and it says 8.2.0. (65) build.
    Thanks for the verification. You are running Premiere Pro CC 2014.2 (8.2). It helps to have that absolutely clear.
    JJ Millen wrote:
    Here are all the checkpoints mentioned in that thread, applicable to my project:
    - Version 8.2.0;
    - My Creative Cloud says Premiere Pro is up-to-date;
    - Operating system is OS X Yosemite version 10.10.1 (14B25);
    Very well, did things operate any differently on Mac OS X 10.9.x? Or did you have the same problem?
    JJ Millen wrote:
    Type: MPEG Movie
    File Size: 4,0 GB
    Image Size: 1920 x 1080
    Frame Rate: 25,00
    Source Audio Format: 48000 Hz - 16 bit - Stereo
    Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
    Total Duration: 00:12:35:16
    Pixel Aspect Ratio: 1,0;
    So is this H.264? What is the camera that you are working with? DSLR?
    JJ Millen wrote:
    - I do not get any error messages, except for the "Sorry, a serious problem has occurred"-message after I have to force quit my Premiere because of the freeze;
    What kind of drives are the media files stored on?
    Are the permissions set correctly (as Read/Write) for the Mac HD and your media drives?
    Are the permissions set correctly for all the Adobe folders as I outlined in my blog?
    JJ Millen wrote:
    - The problem mostly occurs when cutting a clip with the razor tool, regardless of the kind of clip;
    When you import clips, are you using File > Import, or are you importing via the Media Browser?
    JJ Millen wrote:
    - Yes this has worked before, the problems started either after creating a submix (which I've deleted, without result) and/or after updating to a newer version of Premiere CC;
    Definitely do not update Premiere Pro or OS X when in the middle of a project. Wait until it's complete. If you did either or both of these things, you can cause your project to become corrupt. After your current project is wrapped, test with a brand new project.
    JJ Millen wrote:
    - The only software I run actively besides Premiere is Apple's Mail program, Safari and/or Chrome, sometimes Wire, sometimes Spotify;
    - I currently have no third-part effects or codecs installed in Premiere;
    - I installed the latest CUDA Mac Driver, version 6.5.37 (release date 01/14/2015);
    - The problem just happens while working in my sequence, not in any final output. I don't know what is meant by "previews", but I have the yellow bar indicator in my sequence, if that's info you need.
    I have heard of others having issues with OS X 10.10 and NVIDIA GPUs. My advice is to consider downgrading your OS if you continue to have issues. I believe I have avoided a lot of trouble by sticking to OS X 10.8.5.
    Previews AKA the Media Cache are your "render files." They can become corrupt, so it's a good idea to trash them when troubleshooting. You can locate them via your Preferences > Media. Click the Browse button.
    JJ Millen wrote:
    Okay I went through that menu (which I'm not eager to do, I prefer direct contact) and came across the CUDA setting inside the project settings. I've now enabled the "Mercury Playback Engine GPU Acceleration (CUDA)", which might help.
    So were you set to "Mercury Playback Engine Software Only" or "Mercury Playback Engine GPU Acceleration (OpenCL)" prior to changing it to "Mercury Playback Engine GPU Acceleration (CUDA)?
    JJ Millen wrote:
    Testing with a brand new project is not an option. I have a deadline for my current project and it's impossible to start from scratch. What I did try is start a new project and importing the existing one, which didn't help so far.
    I was just wondering if you experienced the same issues in a new project. Any project you update to a new version is suspect, in my opinion. In the future, try to avoid doing that. If your current project is corrupt, I could see why you are having certain issues.
    For what it's worth, we had another user that exhibited similar issues until they started with a brand new Premiere Pro CC 2014.2 (8.2) file.
    Since importing your 8.1 file to a new 8.2 project isn't working, make sure to triple check permissions on all the Adobe folders I laid out in my blog post: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)
    It's the #1 reason Mac users experience freezing and crashing. The other one I'd look at is that NVIDIA drivers are not working well with Yosemite. Finally, if you update a project across versions, it can become corrupt. Not much you can do about that except start a new project ASAP.
    Thanks,
    Kevin

  • Adobe premiere pro cc 2014 - constantly crashing

    Naturally, my project is under deadline..
    My system is running OS X 10.9.4 (13E28)
    late-2012 MacBook Pro Retina
    2.6 GHz Intel Core i7
    16GB 1600 MHz DDR3
    Intel HD Graphics 4000
    NVIDIA GeForce GT 650M
    768Gb Flash Hard Drive
    My project consists of DSLR footage (h.264 compressed files) and Zoom H4N Audio (.WAV files)
    Even after spending most of Thursday and Friday on the phone with Adobe support; deleted all files from media cache, re-imported project, waited for premiere to re-conformed footage, etc..
    ...I still find my project loading sluggishly.. like it takes 15 minutes until video clips in the sequence will fully loads & appear in the project window... it becomes momentarily operable before quickly becoming inoperable as the video and audio no longer playback or respond to the cursor.
    At that point  (when playback no longer works) I can still save the project.
    It seems as though the software loses the dynamic link between the footage as it completely goes black.
    Then when I try to exit Premiere CC 2014.. the program locks up and crashes with no report.
    The crash reports I have are from a few days ago when they first began and before they stooped generating reports.
    Majority of the errors were:
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: EXC_I386_GPFLT
    It also crashed a few times with the following errors:
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x00007fff5fbfdef0
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000018
    Any help would be greatly appreciated!

    First I must say.. ADOBE PREMIERE PRO CC 2014 is glitchy as hell (and in my three weeks editing a documentary or rather two weeks bc I lost an entire week due to this issue) I have come to learn and identify some workaround solutions..
    Here is what I originally wrote after speaking to five different Adobe engineers...
    It is only an issue with PrCC2014 and the temporary solution before the upcoming update is to...
    1) Go into Preferences... Audio... and UNCHECK the box next to "Maintain pitch while shuttling."
    [this is a new feature in PrCC2014 that is processor intensive, causes audio dropouts, and is a major player in why the playback suffers]
    2) Go into your sequences settings for each sequence you have for DSLR footage and change the Editing Mode preset to "CUSTOM"
    3) Next scroll down to Video Previews and change the preview file format to "QuickTime" and the codec to "Animation."
    4) Uncheck the box  next to "Composite  in Linear Color (requires GPU acceleration or max render quality).
    [this is another new feature that is also processor intensive & is also a key suspect to the problem]
    THE KEY TO FIXING (temporarily) THE BEHAVIOR
    When your computer begins to show signs of the glitchy - sluggish playback behavior..
    Stop.. go back into your SEQUENCE SETTINGS and change it to a different EDITING MODE (only temporarily) and click OK.
    You could change yours from ProRes to CUSTOM (as indicated in step #3)
    Next a prompt will pop up asking you...
    Click okay then immediately go back to SEQUENCE SETTINGS and change it back to your original setting, in your case, ProRes.
    Somehow, by DELETING those PREVIEW FILES it essentially resets the issue... until the dreaded glitchy behavior returns.
    I have had luck with this trick and hopefully you will too..
    Cheers!

  • How do I get audio back on single clip that loses audio when imported into Premiere Pro CC?

    I've got one clip out of many that for some reason won't play any audio when imported into Premiere Pro.  I am new to Premiere Pro so am hoping it's something stupid I've done, but this is a problem with just a single clip exported the same way as all my others, the original audio is loud (not quiet) and none of the FAQ issues seem to apply (ie I haven't muted the audio or anything stupid like that)
    The clip was exported from Plural Eyes into a "master" Premiere Pro project where the audio is fine. I exported it as a short MP4 clip and if I play the clip in Windows Media Player the audio is there loud and clear.
    But when I import the clip into a fresh Preimiere Pro CC project this clip appears with just the "film strip" icon on the far left in the Timeline panel, unlike other clips which have an icon that shows "film strip" in the background and "audio wave" in the foreground.
    I'm hitting so many glitches with the CC editions of Premiere Pro and After Effects which have annoying inconsistencies between them I'm tempted to just go back to Sony Vegas Pro (single program, no hassle) but hoping most of these issues are down to "newbie incompetence". Very hard to understand why this one clip out of many should be giving me this specific problem though. Any ideas?

    I'm getting so many weird results. Most go away by simply closing the project and re-opening and I only have 6GB memory but even so, I'm disappointed by what I thought was supposed to be more "world class" video editing software than Sony Vegas Pro which I found to be a lot more stable. Also struggling with differences between Premiere and After Effects. Every time I want to do something in Pro I seem to need to go to After Effects and vice-versa. After Effects lets me do more of what I could "just do" in Vegas Pro timeline, but it's hideous for lining up audio and having to render anything in RAM to even get a clue as to what a change has done.  Need to add Audition to the long list as well I suspect. Fun times!

Maybe you are looking for