Audio is not synchronized with video

When I play a video that I have imported into Itunes the audo is not syncd. There is "Chattering"?. The file plays fine in VLC. How do I fix this?

Hello bacohen8,
For playback issues with iTunes for Window, please check out this article:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
Note one of the symptoms addressed is, "audio that is out of sync with the image on-screen".
Best Regards,
Nubz

Similar Messages

Audio does not fit with video FCPX 10.1.3

Hi, I have a little bit unusual (at least for me) problem. I have old video from camera (maybe 20 years) on my HDD and I would like to edit it. Problem is the audio does not fit with video - when somebody talks it is apparently delayed. Can you give me a hint how to fix it in FCPX? I tried to detach audio and move just audio line but it is not possible.
Thanks

I tried it again from the beginning and now I can move audio to the right. I would just need to move video to the right, so audio stays still.. I need to delay audio so one option is to delete part of beginning of audio track or somehow move video to the right but it is not possible, i guess video track in the beginning cannot be empty....
It is difficult to explain

Audio does not load with video

The audio does not load with video in 12?

Welcome to the forum.
Can you provide us with a bit more information, please?
What OS version are you using?
What are the full specs. of the AV file, that is not Importing with Audio?
What Project did you set up, at New Project?
Exactly what steps were used to Import that AV file?
Did you allow adequate time for PrE 12 to Conform the Audio portion of your file?
Good luck,
Hunt

PVC2300 recorded audio is not sync with video

Hi all,
I have a big big problem with my new PVC2300 network camera:
when I recording (from browser interface) the audio of the .avi file is not sync with video... in details in a record of 12-13 minutes the audio ends 8-10 seconds before the video... and I suppose that more lenght is the recorded file and more lenght is the desync between audio and video.
I use MPEG4 video stream at 640x480 30 fps and audio G.711 A-Law in mode "simplex - listen only".
For my usage this is a very big isssue... I hope there is a way to fix it.
Thanks in advice
Robert

I tried for 2 days for all possible configurations, editing: frame rate, quality, resolution. and type of stream (MPEG4 or MJPEG).
The only case that the recorded audio and video is sync is setting the SMB protocol to autorecord to a NAS.
But this mode have a lot of problems (.asf format, large file size and continuos recording without the ability to start and stop the recordings).
I think that the desync is a bug (a very big bug) of yours activex control that makes the recording.
I have find more or less a workaround using the Cisco Client... the program get an error on start (after unintall and install few times, and a lot of test, I understand that the only way to use the Cisco Client is running it as administrator.
Ok finnaly the cisco program works, but using it I found another problems:
after recorded, I tried to export a part of recording for testing the audio-video sync... the program gives me 2 format: AVI (without the ability to choose any other options) and ASF (with quality options). I tried first AVI format... the result sucks: bad video quality, 1,8 GB every 20 minutes and audio desync... no comment! ...then I tried the second export format: ASF...thats OK, the result is good... audio finally is syncronized with video.
My system is Windows Vista SP2 (32bit) and Internet Explorer 8... I tried also from an other pc with Windows 7... same problems recording from browser interface. I have installed on my system the lastest video codecs (for example: divx etc.).
For my usage I can use the Cisco Client but my ideal usage will be recording from browser.
I think these problems are very serious for a product as is this camera.
I hope there is a way to resolve they... maybe with a future firmware update or installing an other software.
Thanks
Robert

Isight audio does not record with video

isight audio does not record with video

Welcome to the forum.
Can you provide us with a bit more information, please?
What OS version are you using?
What are the full specs. of the AV file, that is not Importing with Audio?
What Project did you set up, at New Project?
Exactly what steps were used to Import that AV file?
Did you allow adequate time for PrE 12 to Conform the Audio portion of your file?
Good luck,
Hunt

ITunes 11.01 on Windows 8 audio will not sync with video

I have a new computer that is running Windows 8, and I have had no issues with iTunes 11.01 thus far on it other than the fact that when playing videos, the audio will not sync up with the video.
With the ineptitude that seems to define Apple as of late, there does not seem to be any actual support for Windows 8, and the "support" channels do no good at all.
Any ideas as how to fix this problem?

I think Microsoft made the Windows 8 incompatible with Apple products on purpose, they want windows users to have to download apps from their paid service which is more expensive than Apple's App/iTunes Store

Audio does not sync with videos

Sometimes when I download videos from iTunes, the audio and the video are not in sync. This has only started to happen since I upgraded to iTunes 7. Is there a way to fix this or is it a problem with the download process?

David, I'm monitoring the audio through the line out of my Mac Pro, using a small pair of powered computer speakers.
It's a system I've been using for years, and haven't had a problem w the audio waveform not matching the audio I hear, until now.
Thanks for your response!

Audio does not import with video

When I drag my clip to the time line the audio is gone!!! Help

It would be quite helpful to know what format the footage is, what camera it came from.
First thing to try is this, assuming AVCHD or similar footage type from SD card -
Copy ENTIRE card contents to hard drive, not just video clips. In Premiere, Import using the "Media Browser". See if that helps
Thanks
Jeff Pulera
Safe Harbor Computers

Audio is not synced with video after Exporting QuickTime Movie

I have Canon DSLR footage shot 24p/1080p on the timeline. Timeline settings are the same as the Canon footage settings.
When I Export a QuickTime Movie, the audio is out of sync...
Can someone please help with this issue...
Thanks,

Don't tell me...you edited the files the camera shoots without converting, right? The camera shoots H.264...FCP doesn't like to work with H.264. The problem is that it SEEMS like it will work, but really is rife with issues when trying to work with it. You have encountered one...loss of sync.
The proper workflow is to convert the footage first...
#51 - Canon 5D MkII / Canon 7D footage into FCP
Shane's Stock Answer #51 - how do you bring in footage from the Canon 5D and 7D cameras into FCP to edit?
You need to convert all of the Canon 5D MkII footage from the H.264 format that it records, to ProRes 422 (ProRes HQ is unnecessary...no quality difference) Yes, the file sizes get drastically larger. H.264 is an acquisition and delivery format, not an editing one.
You can use the Canon EOS Log and Transfer plugin that works with the 1D, 5D and 7D cameras. This plugin is great because it brings in the camera's TIME OF DAY as timecode, instead of starting each clip at 00:00:00:00 like Compressor or other conversion software will do.
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=139&mo delid=17662#DownloadDetailAct
Here is a tutorial on how to use it:
http://provideocoalition.com/index.php/ssimmons/story/canon_releases_a_dslr_plug _in_for_final_cut_pros_log_and_transfer_tool/
And the workflow for tapeless ingest into FCP:
http://library.creativecow.net/ross_shane/tapeless-workflow_fcp-7/1
But for a quick fix...change your SEQUENCE SETTINGS to ProRes...render, and then export.

On export audio does not align with video

So I am learning pre for school and we have to place audio and video together. When I view this in Pre it plays fine but when I export it as quicktime they don't match ie audio 1 and video 1 are playing and it fades to video two and still playing audio 1 rather then audio 2. Now the teacher is no help (go figure), the school support says its adobe issue and I can't pay adobe to help me pass my assignments. lol. Any help is appreciated.
thanks

Here are the requested images; also I don't want the audio to start exactly at start this the tiny space from video start to audio clip but then the output is all off.

Itunes audio is not synched with video, how do I fix it?

When I play a movie or a music video in iTunes the audi becomes farther from the vidoe as the file plays. There is also a scrtatchiness to the audio track. I can no longer play any video of any kind on itunes becaasue of this.
any hints as to the problem and how to fix it?

Where do you live?

Audio not sync with video using photo booth since os moutain lion was installed

Since OS Moutain Lion was installed my photo booth no longer function well, audio is not sync with video, the sound delay is obvious with the video outut wha can I do to correct this?

I've seen that problem in several threads, both here and in the Mountain Lion forum. I tried to replicate the problem but was unable to do so... so it's not a problem effecting all Macs. Try posting here - in the Mountain Lion forum - and see what you get as a search. There's one specific "More Like This" to the right on this thread but there doesn't seem to have been a solution posted.
Good luck,
Clinton

Audio not synced with video on movie downloads

The audio is not synced with video on movie downloads from the ITunes store. I have downloaded many movies in the past from the same PC with no problem.

Hi Jimmyjoefl,
I understand that you are having playback issues with videos you have purchased from the iTunes Store. After doing some research, I found the following resource that describes your exact symptoms:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Here are some things to check if, when viewing a movie in iTunes for Windows Vista or Windows 7, you notice that a video appears distorted, intermittently pauses, or has audio that is out of sync with the image on-screen.
Thanks,
Matt M.

Video and audio tracks not synchronized after importing

When I try to watch a video in quicktime or itunes video and audio tracks not synchronized. If I wach on another player they are synced. Anyone help?

John:
Thanks for your reply. Excuse my referring to you as "Kevin". I'm new to the Adobe Community. I have also referenced another article which is seemingly a bit easier to fix for such a non-technical woman like myself. I'm going to try both solutions. Whichever works I'll be sure to reply to the thread with my findings. I found this article which provides the following solution: http://blog.flickharrison.com/2012/04/problem-solving-in-adobe-premiere-audio-glitches-and -sync/

I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie. Any suggestions to fix?

I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie. Any suggestions to fix?

Thanks for the reply. I tried playing with detaching the audio in iMovie, but with 20+ hours of video to correct, it would take too long. After 28 hours, Corel/Roxio tech support replied that it is a known bitrate mismatch problem and they have no real fix. I strongly suggest not to buy this product.

Audio is not synchronized with video

Similar Messages

Maybe you are looking for