Audio is slurred and distorted in my movie

About a month ago i tried to compress my movie due to it taking up too much hard drive space and now im reviewing the movie and the sound is distorted. Was wondering if the compression had anything to do with it or is it another problem. Also movie is about 30mins long and it doesnt play smoothly its all choppy- Help please.

If you're using OS 10.3.9 + iMovie 5 + Quicktime 7.x, you may want to read my post here:
http://discussions.apple.com/thread.jspa?threadID=361416
My problem seemed to be with Quicktime 7...

Similar Messages

Audio is garbled and distorted.

dv4 2040us HP Pavilion Notebook. Windows 7. When playing a DVD or itunes my audio is all garbled and distorted. I have disabled the Enhancement under Sound, and I have downloaded audio driver updates. What can I do to fix this problem? Only 2yrs old.

my audio is all garbled and distorted. I have disabled the Enhancement under Sound

Mystery audio performance changes and distortion

I listen to a lot of rock, hard rock, and heavy metal on my 80GB Video iPod. In the past two months, I’ve been having problems with distortion and equalization. I do have the latest iTunes and iPod software updates installed and I have re-instaled iTunes and re-initialized the iPod.
Originally, I was using the iPod earbuds and upgraded to vModa Vibes. Most of my music sounded great with an EQ setting of “Dance” with the vModas.
After a while, I started to experience distortion and loss of detail, especially on the left side (crackling). I thought I had damaged the vModa Vibes, so I purchased a pair of Ultimate Ears Super.fi 5 Pro Earphones.
The Ultimate Ears Super.fi 5 Pro earphones sounded terrible with no highs or midrange detail and way too much low range. They seemed to distort easily and overload in the-mid range if there was a lot guitars playing (drowning the details out). I tried all sorts of EQ settings to no avail. The problems remained, even on treble boost, but I didn't have a problem specific to the left side.
I returned the Ultimate Ears Super.fi 5 Pro earphones and switched back to the vModa Vibes for a while and finally decided, on the recommendation of a friend, to try the Bose TriPort IE earphones.
The Bose TriPort IE earphones were much better than the Ultimate Ears Super.fi 5 Pro earphones, but still lacked high frequency and mid-range detail as compared to the vModa Vibes.
While switching back and forth between the vModas and the Bose earphones, the sound performance (or equalization) seemed to change at random, even though I kept the EQ set to off.
At one point, the vModas suddenly had incredible bass, while maintaining the other performance characteristics, with the EQ still set to off. Later, I played the same song again, and the bass was normal (all I did was charge the battery with the Apple USB AC adapter).
I’ve been using the vModas again for about a week now, and every time I listen to the same song, it plays differently, sometimes great, sometimes with extra bass, sometimes muddled and distorted. The same thing happens with Bose TriPort IEs, except they aren’t as clear as the vModas.
The performance issues seem to somewhat track battery charging (i.e. – after I charge the iPod up, audio performance changes and it sometimes improves as the battery drains).
I figure that either there is a hardware problem with the iPod or there is some type of EQ virus going around.
Anyone having similar problems or have a solution??

I went out and bought a 2 GB iPod Nano and loaded some songs onto it.
Everything sounds great with the vModa Vibe earphones so I guess my 80 GB video iPod might have a few twisted transistors.
I'll have to try to clear out the 80 GB video iPod and reinitialize/restore it again to see if it corrects the problem.

Perfect audio in FCPX timeline, distorted after export to QuickTime mov

Anyone experiencing distorted audio with a QuickTime movie file exported from Final Cut Pro X? The audio sounds great in the timeline, but muffled and distorted after exporting it. Here's the kicker, I took that same file and opened it using QuickTime 7 and the audio is fine. I took that same file and converted it to a WMV file using Flip Player, and the audio is fine. So it would seem that the problem is the newest version of QuickTime (v10.4). If any of you have come to a similar conclusion, is there a way to remedy this? It's problematic because when I upload the file to YouTube, the distortion is present. Thanks in advance to everyone who can assist with this.
MY SYSTEM:
MacBook Pro (Retina, 13-inch, Late 2013), 2.8GHz Intel Core i7, 16GB RAM
OSX Yosemite 10.10.2
FCPX v10.1.4
QuickTime v10.4

Hi Al,
Here are the steps I use to export:
From the File menu, I select 'Share' and select 'Master File'
In the pop-up dialog box I click on 'Settings' and select 'H264' as the CODEC
I open the rendered file with QuickTime Player and the audio is distorted.
I open the rendered file with QuickTime Player 7 and the audio is fine
I convert the exported file to a WMV file using Pro version of Flip Player. The audio in the resulting file is fine.
I'm no expert but this would on the outset appear to be a problem with QuickTime v10.4. I can't seem to find a way to resolve this. Thank you for your assistance.
FYI - the audio file for the project is pulled in to FCPX as an mp3 directly from the iTunes library via the 'Music and Sound' browser.

HT5287 If DVD Movies, Audio CD's and even burning CD and DVD's are not supported, what is the point of DVD & CD Sharing then? Wouldn't it just be better to remote in or use a thumb drive if it's only able to be used for data transfer?

If DVD Movies, Audio CD's and even burning CD and DVD's are not supported, what is the point of DVD & CD Sharing then? Wouldn't it just be better to remote in or use a thumb drive if it's only able to be used for data transfer?
Or am I missing the bigger picture?

As long as you have a Superdrive or an external burner/drive, burning, watching, installing, etc. from CD or DVD will work just fine. And so will sharing.

Imported analog video successfully and it is normal in the "Event" pane but when I move a clip into the "Project" pane, it enlarges it slightly and distorts it. How can I keep that from happening?

Imported analog video successfully and it is normal in the "Event" pane but when I move a clip into the "Project" pane, it enlarges it slightly and distorts it. How can I keep that from happening?

Hi
Turn off analyze/image stabilization.
Yours Bengt W

Distorted audio in iTunes and other apps after 10.8.4 ?

Hi
Listen. After i installed the latest 10.8.4 i have distorted audio in iTunes and other music applications.
I have tested this on 3 mac's all with the same result. distorted audio when playing loud
Anyone else got this new problem after installing 10.8.4 ?
I already filled in a bug report to Apple at https://bugreport.apple.com
We need to get this fixed NOW... Please write your situation if you discovered the same bug.
Thanks.
Have fun.
Erik

Ask on the Microsoft forums, as it's their software you're having problems with:
http://answers.microsoft.com/en-us/mac

HT4016 How to extract audio from a movie that is already in my project without having to delete and re-import the movie?

The article is
"How to extract audio from a movie file"
But it only tells you how to extract when you first drag the movie file into the project. This much is obvious when a dialog presents you with a checkbox asking if you want to "Extract the audio track" ... Duh
Here was my workflow:
Dragged the movie file into my project
I checked "Extract the audio track"
I shifted the "Movie Start Time"
Extracted audio track did not shift with the movie
I deleted the extracted audio and played the audio directly from the movie
Now, I need the audio extracted again at the current movie position
I knew where this option was in the Logic 9 menus, but I'm having trouble finding it in Logic X
Is this option still available, or has it been removed?

Solved:
I found the menu option for extracting or re-extracting the movie audio. BTW, the original article:
Logic Pro 9.1: How to extract audio from a movie file in 64-bit mode
should really also state the menu command for extracting the audio, not just the procedure when first adding the movie to the project.
Here's the menu command:
File>Movie>Import Audio from Movie
Cheers

4.2.1 was supposed to fix problems, but it only created new ones. No video on some movies, no audio on others, and can't even play some movies. Can you please provide a means to restore 4.1.1?

4.2.1 was supposed to fix problems, but it only created new ones. No video on some movies, no audio on others, and can't even play some movies. Can you please provide a means to restore 4.1.1?

Let me try again, Chenks. I'm a technical person by profession, and so can get deeper into things like this, but I have not attempted to use these methods of communication in the past. I'm trying to get some feedback to Apple on their worsening a product and really messing with existing customer configurations. I'll try to break things up below.
1. Configuration:
Existing Apple TV and Mac Mini configuration in place since December 2010.
Three Apple TVs, one in Family Room for music and movies, one in Master Bedroom for music and movies, the third one in the Living Room for music only.
I'm using iTunes as library. (Probably an obvious statement, but wanted to mention that.)
2. Pre 4.2.1
No problems at any location since configuration finalized and all equipment installed in December.
Since December, Family Room entertainment equipment was updraded to a new Sony Bravia 3D, and a new Pioneer receiver. The Master Bedroom still has the original Toshiba 32HLC56 TV. That unit has only one HDMI input. I'm using the built-in speakers. This TV/Monitor is about fives years old.
3. Problem
I updated the software in two of the Apple TVs to 4.2.1. I updated the Family Room device and the Master Bedroom device. I had not updated the Living Room device.
After updating to 4.2.1, the Family Room equipment works fine. That's the location with the newer TV and receiver.
The Master Bedroom has different problems with different movies: e.g. "The Little Mermaid:" video, no audio. "The Lion King:" movie wont start at all.
Additionally, in the Master Bedroom some movies work fine, other movies start but immediately go into pause mode. Pressing pause button on Apple remote will not initiate start of movie, screen does "flicker" for a moment but movie does not start to play, showing only the last frame that had been streamed.
4. Not really a problem for me.
Fortunately for me, I had not updated the Apple TV in the living room so I used it to troubleshoot the problem. Initially I thought it was a defective Apple TV in the Master Bedroom. I took the unit to the Apple Store in town and they exchanged it for me. I brought the replacement Apple TV home but I did not install it immediately.
While testing the Master Bedroom set up once again to make it was working for our afternoon movie watching, I was again reminded that a software update was available. That message came up because it was the unit I had brought over from the Living Room. I proceeded to update the Apple TV to the new software version (4.2.1).
As soon as I "updated" the software in the Apple TV to the new 4.2.1, the same problems manifested themselves. At that point I suspected that the problem was with 4.2.1, and not with the hardware.
I called Apple Support and went through a series of troubleshooting techniques. We tested the Apple TV with the new 4.2.1 installed in it. This is the unit which originially in the Living Room. Under the direction of the Apple TV support technician, I used the Family Room gear and the Master Bedroom gear to try and isolate the problem to hardware or software.
We eliminated the following as potential problems:
a. TV speakers in the Master Bedroom
b. HDMI cable
c. Ethernet connection
5: Conclusion:
Fortunately for me, again, the Apple TV that the Apple Store had given me that morning still had 4.1.1. So I installed that unit in the Master Bedroom and everything started working normal again.
6. Side note:
An interesting observation: In early March I copied several movies from the Mac Mini to my iPad and some to my wife's iPad. All movies worked fine on our flight out and while we were away.
My wife recently (about a week ago) updated the software in her iPad. and now some of the movies that played just fine on her iPad are exhibiting the same problems as the Master Bedroom TV when it is connected to an Apple TV with software 4.2.1.
Apple has been trying to fix some problems in 4.2 when it released 4.2.1. I make that observation based on recent articles I found on the web. Most likely the Apple engineers were trying to fix things in one place and broke them in another.
Clear as mud, isn't it?
7. In closing:
I'm good to go, I just need to remember not to update the software in the Master Bedroom Apple TV. I want to keep that unit at 4.1.1. It's possible that Apple might come to the realization that they hosed things for some of us. Because I do have three units in my home, I can experiement with the other two units should a "fix" come out. I can then update one of the two devices, connect it to the Master Bedroom TV, and see if the problem was corrected. If not, I stay with 4.1.1. But I'm not convinced that Apple will see this as their problem, it's always easier to point elsewhere.
Regards,

My apple TV is connected to a DTV with an HDMI cable and to my Yamaha receiver via optic cable. We rented a movie on Apple TV and.found that the movie played, but we only got audio for music tracks. Voice tracks were silent using both TV and receiver.

My apple TV is connected to a DTV with an HDMI cable and to my Yamaha receiver via optic cable. We rented a movie on Apple TV and.found that the movie played, but we only got audio for music tracks. Voice tracks were silent using both TV and receiver. This only occurred on the rented video and on recorded shows on my cable DVR. previews and other content on Apple TV are fine. Any ideas??

Previews and trailers do not contain 5.1 audio.
If you have recently moved your setup, you may have inadvertently changed some of the settings on your receiver. It certainly sounds as though it is unable to play the 5.1 audio from the Apple TV.

Audio Issue - Using Logic Pro and iMovie to Create Movies for Youtube

I am trying to use a combination of Quicktime, iMovie and Logic Pro 9 to create videos of me playing/singing songs to post on Youtube. Before I can ask the question, I think it would be best to briefly explain my process, so here's one example:
One thing I try to do is video myself playing piano and singing at the same time. What I do is open up Logic Pro and load my piano sound and arm an audio track that my microphone is plugged in to; I also go to "System Preferences" and click on "Sound" and make sure that my audio interface is selected for the input method. Then, I open up Quicktime and select "New Movie Recording". Finally, I open up my software for my interface and set it up for "loopback"...there's a picture below.
If you look at the bottom of the interface, you'll see it says "DAW 1: Loop Back 1" and "DAW 2: Loop Back 2". Ideally, this means that whenever I start recording in Quicktime, all of the sounds that I am making in Logic (the piano playing and the singing) will loop back into the computer and be recorded by Quicktime. This does actually happen, but my question is this:
I've noticed that the sound quality of software instruments is drastically reduced once they have been recorded by Quicktime (or iMovie) and I play the movie back. Actual audio files, like me singing or playing a real instrument aren't really affected, but for some reason the software instruments sound very thin once I listen to the audio in the movie. Why is this happening? Is there a way to preserve the audio quality to be the same during video playback as it is when I am playing the instruments live in Logic?

Interesting and convoluted way to get something done.. from what you're describing it almost sounds like the software instruments are somehow getting recorded twice but slightly out of phase.
When you record your singing are you monitoring through headphones or speakers?

My audio is really slow and distorted whenever I try and play a video sent through an emails

The audio of any video Link in my emails that I receive,when clicked on to play it, the vocals are very slow and distorted. It sounds like the monotone sound of vocals being distorted to make it unrecognizable. It has been this way ever since I downloaded and installed it.

Currently there is no Flash support for Firefox on Android. Fret not though, there are mobile developers working on front-end Flash support currently and if all follows through you will see Flash support in the near future in a future release of Firefox Aurora.

Adding Menue Audio Track selection and soubtitles on/off

Hi,
with some help from replies to other questions I managed to get a working DVD/BR with cool 2.0 / 5.1 sound and subtitles.
But for now I do have to select the audio track manually and also I do have to enable subtitles from the DVD/BR players menu.
So I wanted to add a DVD/BR menu where you can choose the audio track which should be played and to switch on and of subtitles.
I edited a nice PS PSD File with some buttons and they show up in Encore and I can do some "encore" editig like moving tham arrond or link to some other elements.
My question: How do I get e.g. the Button "2.0 Stereo" to select the stereo track and the button "5.1 Surround" to select the 5.1 track. An other button should switch on/off the right subtitle
Than I'd like to have a button which starts the video with the selected audio and if selected subtitle on.
At the end of the movie I like to be back in the menu.
I bet thats simple
I thought to create different timelines and add the audio/video/subtitle, but that i have a lot of timelines in all sort of combinations; e.g. video ON, 5.1 sound ON, subtitle OFF ..... video ON, 2.0 sound ON, subtitle ON etc ....
Thansk for any suggestion . and BIG thanks. Götz

Thanks for your posting, but there is the higlight Layer.
I opend the menue in photoshot once more and enabled the layers.
For me a button has the following different states:
Normal, no highlight,just "plain" text. e.g. "English Subtitle". in that state, the Subtitle is NOT selected/enabled.
Mouse Over, the highlight shows up, so you can see where you are with your mouse. e.g. "English Subtitle √"
Mouse left click, the highlight "sticks" to the menue item and when moving the mouse avay it is still highlighted, e.g. "English Subtitle √"
So I'd liked to indicate which audio track is enabled/selected and if subtitles are off or on.
I thought, the highlight button states are markend with (=1) & (=3) ....
BTW. in encore menue edit mode, if I click the show selected/activated Subpicture Highlight, the right layer shows up (with my √-symbol)
But in preview mode or on a burned dvd this did not work
Regards . Götz

Can I download to Apple TV in my office next to my iMac and latter move the Apple TV to the room with my HD TV and watch a downloaded movie?

Can I download the movies in my office into a Apple TV unit and where I have my 27 iMac and latter move the Apple unit to my bedroom and watch the downloaded movie in my HD TV?
I am presently watching movies in my 27 iMac downloded from itunes but would love to see them in my hd tv.
Another question would be if i can connect the Apple Tv via the HDMI into my Onkyo hometheater and so i would get the full sound? Or do I have to connect to the hd tv directly?
Best regards

If it's a first-gen Apple TV (white box), content is stored locally, on its internal HD. You sync it with iTunes just like an iPod or iPhone, and the files go where the unit goes.
If it's an ATV 2 (black box), content is streamed over the network from any connected computers' iTunes libraries. In that case, it shouldn't matter where in the house it is, as long as it and the target iTunes library are on the same network and set up for Home Sharing.
As for connecting it to your HDTV or Home Theater, either should work fine, though I believe the HDMI only outputs video, in which case you'll also want to use the Optical output for the audio as well.
Good luck!

No sound and meters do not move with the new Motu Traveler

I recorded four channel of audio with the built in sound on my power book G4 1.6 until I got a Motu Traveler fire wire audio interface. I got to preference/Audio in Logic and switch to Motu. Then when I play the song, there is no sound and the channel meters do not move. I have Logic Pro 7 version 1.0.1. I updated the OSX Tiger to 10.4.2 and the Motu fire wire to 1.2.5.2.
I can here audio throe head phones on the Motu if I plug a mic in to it but it will not show up in Logic.
Yes the fire wire cable is connected. It reacts to logic start up (click,click etc,.)
What am I doing wrong.
I'm an ex Cubase user whom switched to Logic and thought it would be easy.

I dont use logic but I have had some similar audio routing issues with my mac and my traveler. if you can hear audio out your phones see if the default stereo output for the traveler is set to phones, that could cause this problem. click on the motu fire wire icon (not the cue mix dsp) and make sure you default outs are set to whatever you have speakers plugged in, also go into your audio midi set up for OSX and make sure every thing is for the traveler to be the default output. you might have to re-launch logic to make it see the changes, not sure though i dont use it.

Audio is slurred and distorted in my movie

Similar Messages

Maybe you are looking for