Audio issue H264 - MPEG-4 AVC / audio PCM U8 (u8 ) 12000 khz

Hi all
I have this issue with pp cs5 - 5.0.3
Importing a 720p .MOV clip from a compact camera "canon powershoot a3300 is", the video preview, editing and quality is ok but the first 3 second of audio is looped along the clip duration.
All the player, quicktime 7.6.9, Vlc, play the clip and the sound is good.
Gspot say: codec avc1 - H.264 audio raw 8-bit unsigned 12000 hz
Vlc say: H264 - MPEG-4 AVC (part 10) (avc1) audio PCM U8 (u8) mono 12000 hz
Qt say: H264 1280x720 - 8 bit - mono - 12.000 khz
With other clip from my sony xdcam ex1 or other format... premiere cs5 go fine
Another system with premiere cs4, the import and the editing is ok.
Any ideas?
thanks

thanks
I had already tried but not working
The video is ok with all the preset that match 720p ...but not the audio
...i think is a codec issue

Similar Messages

Video compression h264/MPEG-4 AVC

hi guys,
I need to export a file in mp4 container with h264 compression. The result shows h.264/MPEG-4 AVC compression which is h.264, right? If I undestood it right h.264 and MPEG-4 AVC compression is the same thing, right? just wanted to be sure...
thanks and have a nice day!

thanks
I had already tried but not working
The video is ok with all the preset that match 720p ...but not the audio
...i think is a codec issue

X230 audio issue, cannot record or hear audio intermittently.

We have 209 x230 laptops with windows 7 64bit. A good number of these laptops are having intermittment audio issue. You cannot hear anything or record anything. Sometime the system sound will work but other application such as the web browser will not work.
EDIT: All drivers are updated.

Hi there
Have you tried what is outlined in the link below?
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Tips for Users with Audio Issues in MPEG Files

I have seen a lot of users expressing issues with getting audio to export correctly in their videos, and I thought I would share what's worked for me.
Whenever I'm converting MPEG videos, I have found it useful to open the video with an audio editor (I use GoldWave) and export the audio as a WAVE file. I can then open that WAVE file in QuickTime, copy it to the clipboard, and choose the "Add to Movie" option in the player with the video. Once that's done I'm able to export the video along with the audio.
For DVD's with Dolby Digital audio, I've had success with DVD2AVI. Using that program I can decode the Dolby Digital audio to a WAVE file and use the same method of opening it in QuickTime and choosing the "Add to Movie" option. This has proven invaluable for transferring videos captured with my DVD recorder.
Basically, my solution has always been to extract the audio as a separate WAVE file and adding it to the video using the "Add to Movie" option.

I have sensory issues involving bright lights, flashing lights, loud noises, high-pitched noises, proprioception, and some other stuff. I don't have colorblindness.
I also have a fix to use bigger font sizes to reduce eyestrain. I tried using zoom, but too many websites broke with zoom, it kept reverting, etc. If nosquint does zoom better than the default, nosquint might help with that.
But... I still have sensory issues involving bright lights, flashing lights, loud noises, high-pitched noises, and a lot of other stuff everywhere and online, and I still need fixes ...and I also need people to stop beating me to the ground, but that's beyond Firefox.

X120e audio issues

Greetings,
I have an x120e that I bought in August (8GB Ram upgade). I have been having some audio issues whilst doing some light audio editing in Audobe Audition (CS 5.5) and listening to music.
When my internal speakers are playing sound, it frequently occurs that the sound quality turns to crap. It sounds like the bitrate has fallen to the lowest possible setting. It sounds like it is only playing out of the right channel mainly, and is similiar to if my computer was inside of a metal bucket. I've tried updating the sound driver, but even after I downloaded it, and installed it, the driver date for the device is still old.
The music files I am playing back and editing are large and generally uncompressed. Could this have something to do with it?
Any help would be much appreciated as I am editing videos on this machine, and it is difficult to edit if the sound quality is poor.
Cheers,

Hi El_Capitan
1. How about playing the sound with an external speakers or headphone?
2. Go to Start, Control Panel, Sound, under Playback tab, double-click Speakers, go to Advanced, under Default Format, choose the highest, click Apply and OK. (Repeat the steps for Headphones and Microphone)
Does the following steps help?
Have a nice day!
Peter
W520 (4284-A99)
Does someone’s post help you? Give them kudos as a reward, as they will do better to improve | Mark it as solved if the solution works for you, so it could be reference for others in the future
=====================================
Sound Enthusiast and Enhancement (Post comments, share mixes, etc.)
http://forums.lenovo.com/t5/General-Discussion/Dolby-Home-Theater-v4-for-most-Lenovo-Laptops/td-p/6...
http://forums.lenovo.com/t5/IdeaPad-Slate-Tablets/IdeaPad-Tablet-Sound-Enhancement-Thread/td-p/7150

MPEG Layer-3 Audio not playing in IE - Plugin problem?

Please can someone advise me how to rectify the following issue. I updated Quicktime last night to 7.6.2. Since then I have been unable to play quicktime audio files in IE, where previously (yesterday), this would work.
Audio links for MPEG layer-3 files now do not work, and instead I get a blue Q with a question mark, and a red cross where the quicktime logo should be. The page informs me that audio requires quicktime 7, though I aleady have this installed and have the audio files associated with Quicktime.
Also, when I go into the MIME settings within Quicktime preferences (Vista Platform), it does not bring up the expected window and directs me to Windows file association.
Is anyone able to help. I have made no changes to my system other than updating Quicktime.
Thanks in advance.

I apologise if there is an obvious solution to this. I am no expert when it comes to this sort of thing.
If anyone has any ideas I would be grateful. It is quite frustrating when you do the recommended (i.e update) and things stop working.
Please help.

HTML5 Audio Issue Workarounds

I have spent the better part of a week working on problems with a project played back fine in Flash but had audio problems with HTML5. Here are some of the issues and workarounds I came up with:
Custom buttons muting audio
The playbar buttons are too small for smartphones and most tablets so I created larger navigation buttons. Unfortunately, the audio would mute whenever I used the TOC and CC buttons.
Created user variable currentFrame
"Assign currentFrame with cpInfoCurrentFrame" at beginning of button Advanced Action
"Assign cpCmndGoToFrameAndResume with currentFrame" as last action.
iOS devices repeating audio from first slide after a "Loading..." of other slides
Made the audio files as small as possible (use 32kbps as Audio Preference). Be sure to record as WAV and make this a publish preference to minimize audio artifacts.
Delayed audio start time at least 200-300 ms from slide start. I had originally added silence to the beinning of all my files so CC would appear from beginning of slide. Deleting the silence and delaying the audio minimized "Loading..." and eliminated the first audio repeat problem.
Placed end of mouse movements outside of audio content to avoid iOS dual audio file issue.
MobilePlaybar lacking TOC and CC buttons
This one's actually another way around the audio muting problem. I initially didn't use the MobilePlaybar becasue of it not having TOC and CC buttons. I prefer having the Playbar outside of the content area so I went with a modified MobilePlaybar.
Created TOC.png and CC.png. Added to assets\playbar\PlaybarIcons.
Edited assets\playbar\playbarScript.js
     Replaced 'Exit' in playbarAssetArr = with 'CC' and 'TOC'
     Changed var left = 8; to var left = 9;
\assets\js\CPPlaybar.js already has CC and TOC code so does not need to be modified.
I have one last issue that others may have an answer for. The MobilePlatbar Back and Forward buttons don't always work with i iOS. Any ideas?

Hi there,
same issue here.
A workaround, far from perfect, is to request the base64 encoded data using an Ajax call
and set the src attribute of the audio element to 'data:audio/mpeg;base64,' + base64encodedaudio.
Regards

Audio missing when saving a project from PE13 to a mpeg file the audio is missing.

Hi All,
As always thanks in advance for the help.
I have been saving a small video project of short clips into a movie and every time I complete the save to my computer as an MPG video when I go into playback the audio is gone.
IF I re-open PE and play the sections where the music should be it is still there. I am stumped and tried multiple times to save with no success

OINH
I have tried to force loss of audio for a Premiere Elements 13 Publish+Share/Computer/MPEG NTSC DVD Standard export and cannot. So let us try this
approach...
With Premiere Elements 13 Publish+Share/Computer/MPEG NTSC DVD Standard, click on the Advanced Button.
Do your Video Tab, Audio Tab, and Multiplexer Tab look like the following?
Video Tab
Audio Tab
Multiplexer Tab
See if your settings are the same as mine. I have no problem with the MPEG2.mpg from the NTSC DVD Standard.
If we agree on the settings, then look at the situation when you change the Multiplexer Audio Format Settings from Dolby Digital
to MPEG and lastly try PCM.
Looking forward to your results.
ATR

[solved] Strange Audio Issue

I am experiencing a strange audio issue with my Intel-HDA ICH7:
# lspci -v
00:1b.0 Class 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
Subsystem: Hewlett-Packard Company Unknown device 30a5
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at d2400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access>
when I installed Arch linux the first time a mounth ago on this computer, I had a sound problem that was solved in a very strange way.
Everything worked fine until a week or so (I believe from Alsa 1.0.12). Now sometimes sound works and sometimes it doesn't. For example sometime I boot the computer and have no sound, then I reboot it without doing anything, and then sound works.
I have tried messing with the modprobe.conf:
# /etc/modprobe.conf (for v2.6 kernels)
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.11 ---
#alias snd-card-0 snd-hda-intel
#alias sound-slot-0 snd-hda-intel
# --- END: Generated by ALSACONF, do not edit. ---
#options snd-hda-intel model=F1734
options snd-hda-intel model=z71v
options snd-hda-intel position_fix=1
but it was useless. If I put back the modules in rc.conf everything is worse: sound doesn't work at all.
A diff between lsmod in a "working boot" and a "without sound boot" showed that the same modules where in kernel memory.
A diff between dmesg showed this difference:
< hda_intel: azx_get_response timeout, switching to single_cmd mode...
was present in the not working boot. This line is absent in a working boot dmesg.
The only way to make the sound card working everytime is to remove the snd* modules load from the boot sequence and load the modules "by hand" after the login.
Any ideas?
PS : If something is unclear due to my poor English please tell my and I'll try to explain it better.

phrakture wrote:snd-hda-intel is screwed up - on my thinkpad I had to go into the bios and enable the modem for sound to work. Oddly enough, the modem was off by default.
Also, mine has no PCM listed, I need to use "front" as my PCM level... not to mention the UI is way off with 'tpb' (if you have a thinkpad)
Yes it's not an Arch Linux related problem: I had problems with Debian (Etch and Sid based distros like ubuntu) too (but there I had no modprobe issue on the init sequence. Maybe is a problem of shared IRQs, but I have to study the existing documentation as I am a newbie). The difference is that Arch is simple enought for me to try something like modprobing "by hand" in the init sequence. PCM seems to work, however the volume is very low and I have found no way to make the mic work. Under Mepis I was able to make it work only if I plugged it in windows xp and then reboot into Linux. But I can't try it with Arch as I have erased the windows partition...
I will try the new kernel, study the documentation and then report. Hoping this will be usefull to others too.

QT Pro 7 Copy Paste .mov audio issue

I am copying a .mov movie file and pasting it to the end of another .mov file. The video pastes into one continuous video track. The audio is pasting into a second stereo track starting at the end of the first stereo track. So, one video track and two stereo audio tracks.
The entire .mov file plays fine in iTunes. When I stream it or sync it to my Apple TV (1st gen), or stream it to my Apple TV 2, the audio quits at the 2nd stereo track.
Amy ideas on how to merge (so to speak) 2 .mov files of exactly the same type into a single video track and a single stereo audio track?
Thanks...

QT Pro7        Format:    AVC Coding, 720 x 400, Millions
                    Format:    AVC Coding, 720 x 400, Millions
                                   AAC, Stereo (L R), 48.000 kHz
                                   AAC, Stereo (L R), 48.000 kHz
                    Data Rate: 2,082.01 kbit/s
                    Data Rate: 2,281.72 kbit/s
QTPlayer 10 Format:     H.264, 720 x 400, Millions
                     Format:    H.264, 720 x 400, Millions
                                    AAC, 2 channels, 48000 Hz
                                    AAC, 2 channels, 48000 Hz
                    Data Rate: 2,064.05 kbit/s
                    Data Rate: 2,311.58 kbit/s
Interesting that the two QT versions report different video coding and different total data rates. Also QT Pro7 reports Stereo (L R) and QTPlayer10 reports 2 "Channels". They are different things.
With regard to the video coding, AVC Coding is the same as H.264. Either may also be referred to as MPEG-4/AVC or MPEG-4, Chapter 10 content.
Data rate information appears to be calculated differently by each application probably due to the way the data is quantified. (I.e., same difference as noted between the way the QT 7 Inspector reports the file size differently than the Finder Info window.)
While I tend to agree that "stereo" implies two independent channels of "different" data, it would seem that QT X does not choose to emphasize such a distinction.

Bootcamp 3.1 and imac windows 7 64bit update not installing. Audio issues!

After many days of work getting the windows 7 working in bootcamp in my imac 27 (still with audio issues) I eagerly awaited the bootcamp update and imac updates.
Neither will install.
Then I find that according to tech support as of now I have to reinstall Windows 7 again for the updates to work!
It took me 5 full 8 hours days to get all my scientific programs installed and working, now I find I can't even simply update the drivers I need. I don't want to reinstall.
My only issues are audio.
Here they are:
1) The headset jack works fine on the Mac side, but in Windows 7, it causes the i7 intel CPU to go crazy. There is no CPU spike on the mac side.
2) The headset jack in the imac is a trrs jack. The same as in the iphone, a tri-band jack that has three bands, two audio out channels and one mic in channel. A trrs headset works fine on the mac side with using the headset mic (as in iphone) rather than the built in mic. (this provides much better quality for sound recording). I don't want to use a usb mike.
In Windows 7 the mic part of the trrs headset does not work.
3) In Windows 7 when going into audio devices recording, no audio mixer shows up, so when I do video or audio screen capture the only way to capture the sound is through the speakers and then back through the imac built in mic, rather than directly through the unit. (terrible sound quality) On the mac side the mixer element works fine.
Now I find from other imac users that even the new updates for the imac on windows 7 don't address and fix the audio issues. I am sure not going to go through 5 more days work only to find the audio issues still don't work.
I need these audio aspects to work properly though!
I have tried to get drivers for the cirrus logic audio card, but guess what there are none available and cirrus logic doesn't even recognize the board or offer drivers.
I have many windows programs I must have for my scientific research!I bought the top of the line Imac with all the bells and whistles because Apple promised that the machine could run Windows 7 in bootcamp natively!
It doesn't. This has been a nightmare of problems.
Is Apple going to step up to the plate and make good on their promises?
Does any one have a fix for any of the audio issues, or know how to install the new drivers without a complete reinstall of Windows?
Installing a few sound drivers and software should not require a complete reinstall. Getting the proper drivers for the headset jack audio in and audio out jack should be the most basic of fixes. Making the audio mixer work should be elementary.
If you are an Apple tech person or an Apple user that can help on these issues, please do!
Thanks, Dr. Duke
An American profesor in Europe.
PS I will post this under Imac windows 7 updates without a reinstall and under
imac Sound issues.

On another thread a few people have responded saying that their imac has the same situation, the cpu is going crazy and the imac gets hot with headphones or speakers plugged in. But this doesn't happen in the mac side.
If you have an late 2009 imac and don't have these audio issues, let us hear from you. If you don't, lay out the problem here.
Here is my last two cents in to the inquiry.
Not only does the cpu run crazy but the imac 27 gets very, very hot. Since I unplugged the headphones, it runs much, much cooler.
Certainly, some Mac engineers should take care of this problem, it seems it is universal on all the imac 27's and from what I gather, the smaller screened cousins too.
Also, we certainly want a stereo mix option for audio in or out, or what is called "what you hear" or wave out. Imac is supposed to be much geared to multimedia apps.
Finally, the mic jack part of the trrs set up MUST be fixed! A lot of manufacturers are going to headset combo jacks as they call them, mic in and stereo out on the same tribanded plug. But, the old single jack for mic in and single jack for stereo out are two tiny parts of the hardware and super inexpensive for the manufacturer. Why in the **** to go to the "advanced" triplug if the **** thing doesn't work.
Mac has a great reputation. I hope they remedy these problems right away.
Anyone whose imac 27 or 24 whose headset plug is working correctly. Let us know! I don't think anyone's is, but I think that few people understand that their cpu is running so much faster with the plug in, plus few even understand the combo jack and the triband, or trrs audio jack! Out of 4 audio technicians I talked to, not one of them knew what a trrs jack was or that you even have a mic in jack as part of the headset jack!
When I told one senior that it worked on the Mac side, he didn't believe for a while, thought my sound might be recorded from the onboard mic, but I proved it to him by tapping iaudibly on my iphone mic headset and and it showing up in garage band clearly and listening to big difference in audio.
As for a usb audio adapter, I am in a neon light environment and find that those adapters are more sensitive to electrical interference. Besides I want to use the headset jack as it was meant to be used!
Thats it.
Again, if anyone using an imac 27 and windows 7 64 or 32 doesnt have these problems, let us know! We are all anxious for a fix!
Best to all!

SoftPhone over VPN audio issue

Having a "one-way" audio issue when IPC connects over VPN to any Main Office IP Phones (7960). Remote IPC (softphone) shows "0 Received" Packets, but the IP Phone shows them as being sent.
This does NOT happen if IPC contacts another IPC on a PC at Main Site, or any kind of phone at the other branch offices.
Have looked at all of the audio settings on the VPN IPC unit, they are correct.
Any ideas?

Try to sniff the Ethernet traffic during call setup at the CallManager. When Callmanager sends Call Control messages to remote party, it could send wrong IP address or UDP port as an RTP parameters.
Another components could block the traffic are firewalls. How do you have your VPN tunnel built? Do you use Cisco VPN Client? What terminates your VPN traffic at the central location? PIX, VPN3000 or Router? Traffic may go one way without a change, and some protocol FixUp may be triggered for this traffic on the way back. If you have access to firewall logs, check if you have any traffic dropped.
Good luck,
Mike
http://www.headsetadapter.com

Audio issues with ASUS G750JX

Hey Arch,
I'm having a bit of trouble with my audio and was hoping you guys could assist me with it/simplify it.
Incase no one reads all the way to the bottom, basically I'm wondering if theres a way of just using one audio system and not having to worry about the other.
Volume levels won't save no matter what I've tried so far, plus everytime the laptop gets turned on, the headphones level which controls speakers is set to 0
"HDA Intel PCH (Alsa mixer)" "Headphone" controls Bass, "Speaker" controls speakers, "PCM" controls something else as sound gets quieter when it's lowered.
If I plug headphones in, everything gets muted, although after unmuting audio is played through the headphones, however when the headphones are unpluged, the audio mutes again until I manually unmute each stream.
I'm unsure which programs use which audio system, be it Alsa mixer or PulseAudio
Gmusicbrowser - audio is controlled both by itself and by Alsa/Pulse it seems
Vlc - similar but seems to match what both Alsa and Pulse show
I've tried setting them to just use one audio system but it doesnt seem to work.
Below are what come up in the xfce4-mixer
HDA Intel PCH (Alsa mixer)*
HDA NVidia (Alsa mixer)
Playback: GK106 HDMI Audio Controller Digitial Stereo (HDMI) (PulseAudio Mixer)
Playback: Built-in Audio Analog Stereo (PulseAudio Mixer)*
*Both seem to control audio, "HDA Intel PCH (Alsa mixer)" master "somewhat mirrors" what "Playback: Built-in Audio Analog Stereo (PulseAudio Mixer)" does. Eg "Master" is lowered in "HDA Intel PCH (Alsa mixer)" it gets lowered in "Playback: Built-in Audio Analog Stereo (PulseAudio Mixer)" but doesnt exactly match it
$lspci |grep Audio
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
01:00.1 Audio device: NVIDIA Corporation GK106 HDMI Audio Controller (rev a1)
The following are packages installed relating to Alsa or Pulseaudio
multilib/lib32-libpulse
multilib/lib32-alsa-lib
extra/libao
extra/libcanberra-pulse
extra/libpulse
extra/pulseaudio
extra/pulseaudio-alsa
extra/alsa-lib
extra/alsa-plugins
extra/alsa-utils
extra/zita-alsa-pcmi
*multilib packages are primarily due to having skype (don't think I've installed anything else from multilib)
I'm set to get updates from testing and community-testing
Side note - if anyone knows how to get the XF86Backlight keys working (for the actual backlight) that would be cool, currently i control the backlight with the xfce4 power manager plugin.
Thanks to who ever is able to help.

Oh man, this is driving me nuts. First I was having the loud "pop" in the speakers, apparently the sound subsystem going to sleep to save power, heavily discussed in these forums. I applied the 10.4.10v1.1 update and these loud "pops" seemed to have gone away, but what still remains is a soft "scratch" sound before and after almost every time the computer makes sound. Includes interface sounds in the finder, quicktime movies, almost everything. It seems to only happen on my line out, and the loudness of the "scratches" is constant regardless of the mac's volume setting.
I am mostly making music with this thing, so the scratches coming out of my studio monitor speakers is very annoying. Any idea, any workarounds, please help.

Logic 9.1.8 & Mainstage 2 - crashing frequently/audio issues

I have just uprgraded to this set up (though using the same sound card as I did on my Mac Book with Logic 8 & Snow Leopard prevously) - in order to avoid overloading which was happening on my previousl set up.. only to find that this new system seems very buggy - crashes frequently on Logic (Sudden Motion Sensor error - have disabled that now) and Main Stage freezes. Then a wierd echoey sound can happen - whereby any audio is echoed back from DAW, in Logic AND Mainstage.
I have down loaded two plug-ins/VST's since starting to use this new set up - an XILS Lab L.E. verision and a Crystal synth. I've downloaded the up to date Duet drivers from Apogee. (I have an Duet 1.5 that I used with my old set).
Have looked at the Console system log to try and understand what might be happening - it is FULL of text on occasions when Logic crashes - I am not tech savvy enough to unpick it though.
If anyone has any suggestions to help I would be grateful, thanks.
I do wonder if it is a Core audio issue though - given the echoiing that seems to occur...

I have just uprgraded to this set up (though using the same sound card as I did on my Mac Book with Logic 8 & Snow Leopard prevously) - in order to avoid overloading which was happening on my previousl set up.. only to find that this new system seems very buggy - crashes frequently on Logic (Sudden Motion Sensor error - have disabled that now) and Main Stage freezes. Then a wierd echoey sound can happen - whereby any audio is echoed back from DAW, in Logic AND Mainstage.
I have down loaded two plug-ins/VST's since starting to use this new set up - an XILS Lab L.E. verision and a Crystal synth. I've downloaded the up to date Duet drivers from Apogee. (I have an Duet 1.5 that I used with my old set).
Have looked at the Console system log to try and understand what might be happening - it is FULL of text on occasions when Logic crashes - I am not tech savvy enough to unpick it though.
If anyone has any suggestions to help I would be grateful, thanks.
I do wonder if it is a Core audio issue though - given the echoiing that seems to occur...

My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested. How can there be audio issue for all these devices at the same time?
As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
Peace,
P. Dreadie

Audio issue H264 - MPEG-4 AVC / audio PCM U8 (u8 ) 12000 khz

Similar Messages

Maybe you are looking for