Audio issue with windows 10

Take a look at this: http://www.ibtimes.co.uk/windows-10-how-fix-sound-issues-after-upgrade-1513693
I think you should uninstall the driver and right click the device in device manager and select to automatically install the driver. Reboot after uninstalling the existing one.

I have upgraded my old laptop to windows 10 to test it out i have come across an issue where when i have my headphones in the audio does not work but when i have them out works fine. (pretty sure i am not the only one with this issue)
( Dell Insprion N5030, 4gb ram, Intel Pentium, 500gb HDD ) The specs are fine for windows 10
My headphones does not seem to appear in playback settings.
I have tried Updating audio driver says already at latest version reinstalled audio driverrebooted the audio services thru services.msc
Any ideas on fixing this issue don't want to put this update on my main and have no audio.
This topic first appeared in the Spiceworks Community

Similar Messages

  • RDP audio issues with Windows Server 2008

    I have a server with an M-Audio 1010LT audio card installed, running audio playback software.  This software needs to stay running and playing at all times.
    We were previously running Windows Server 2003 and when we RDPed into the box for maintenance, we simply made sure that 'Leave at remote computer" was selected under Remote Desktop's sound settings.  This allowed us to control the console of the server while the audio continued to play through the server's audio card.
    Now, with Windows Server 2008, even with this option selected when we remote into this server all audio stops and Windows shows no available audio devices.  If I end my RDP session and phyically go to the server, I see the audio devices and am able to re-start the audio playback.
    Is this a bug, or something that has changed in 2008?  Any workarounds?
    Thanks

    *****************I
    AM HAVING THIS ISSUE *****************
    (Windows Server 2008 R2)
    I
    reply to this thread to hopefully get more attention to this issue and thus a [faster] resolution. 

  • Vista 64, Latest Driver & X-Fi Elite Pro: Audio issue with Pro Evolution Soccer 2008 (Pes 20

    Hi,i have formatted XP S.P.2 and now i'm using Vista Ultimate 64.I have got an X-Fi Elite Pro and i have installed all the applications using the CD-Rom.I updated the driver, Alchemy and Mediasource to the latest version.The system is totally clean and updated (I used Windows Update when i finished to install Vista and nothing was installed). I would like to know why i cannot play Pro Evolution Soccer 2008 like in XP: when i enter in the game i have a noise (looks like the noise of the needle in old gramophones...) and i cannot use the speakers (Creative ProGamer G500).If i turn the volume to 0 i can hear it too... i have to switch off the speakers or exit the game to delete it.Is it another bug I tried to uninstall and doing a new installation of the game but... no way men... Thanks p.s.After year and 4 months (release date of Vista) is it possible to have a decent driver... The Audio Quality in Vista Ultimate 64 bit is lower than in XP and the same wave files have distortion with the low and middle-high volume (60-70).
    Problems that i have never had in XP... i cannot reinstall XP another time. I bought Vista in 2006 and i cannot use it till you'll release a good sw.
    Have we to wait till 200 for a fuc.ing working driver
    My Hw.: Intel Core 2 Quad 6600, DFI Lanparty DK, 2GB DDR800 Team Group, X800XT 52MB, Enermax Noisetaker 600W, Creative X-Fi Elite Pro, Creative ProGamer G500, Plextor PX76SA, Logitech G5 and G5.

    The problem is now official: other customers have problems with some games (Pes 2008 and Crysis in particular). I'll show u the main italian hw. forum. There is a thread of more than 500 pages just about Creative X-Fi: http://www.hwupgrade.it/forum/showth...42043&page=550 I would like to know if u test drivers before sharing... because i don't know what you did in more than year.You should meditate, people... I paid more than 400 $ for an Elite Pro and after year and 4 month i cannot install Vista 64 too for audio issues with mp3-wave files and Pes 2008 or Vista 32 bit for problems with Pes 2008. This is my latest Creative product, you can trust.

  • FMLE 3.2 and 3.1 can't detect an audio device with Windows 8.1

    FMLE 3.2 and 3.1 can't detect an audio device with Windows 8.1 x64 on an MSI GT72-2QD laptop. I tried 2 different webcams but the result was the same. Both the internal mic and the ones going with the webcams work fine with other software but when I try FMLE it looks as follows:
    It says that there's no audio device connected (although the mics work fine elsewhere), the dropout is blank and the audio parameters are grayed out and inactive even with the "audio" box checked. Both versions of FMLE work fine with the same cams on a desktop which has all the same tech specs but uses Win 7 x64. Running FMLE in Win7 compatibility mode or reinstalling with register cleaning doesn't help. What can be done about it?

    Hi Bob,
    Thanks for the advice. It succeeded.
    The steps I made was to make a disk copy of my original Windows XP disk using Disk Utilty. Then I renamed the disk copy into .iso. I copied the ISO file to my usb flash drive.
    Than I started Parallels 7, created a new VM, selected the correct drive to install from (the usb flash drive) and volia, it worked.
    Finally...
    Sytze

  • Compatibilityy issue with windows XP and windows 8.1 for adobe photoshop elements 4.0

    Compatibility issue with windows XP and windows 8.1 for adobe photoshop elements 4.0?comcom

    You are going to have to contact Adobe on this one. We are other users.
    Sounds like it's not even an Apple question? Not sure.
    But the Adobe program changed, nothing changed in iTunes, right?

  • Major Issues with Windows XP and Sound Blaster Audig

    As mentioned in the post title, I'm using a Sound Blaster Audigy 4 card (recently purchased) and am having issues with Windows XP apparently because of it. When the card is physically installed, but the drivers are not, there are no problems. However, when the drivers are installed, Windows XP's "explorer.exe" crashes on boot, locking up the start menu and any other open windows. Now, I can manually end the explorer.exe application and then reboot it, and things will work... however, I cannot imagine that that is the intended functionality of this card. Additionally, I suspect the card in the failure of a game (Eve Online) but I would assume the issues are related. I've already narrowed the issue down to the Sound Blaster drivers. I've tried booting with the SB drivers but without the video card drivers, and the problem recurred. Every time I boot with the SB drivers installed, it fails. Without them, things seem to run normally. If it helps, I'm using an Intel Core 2 Duo E6400 processor, with GB of DDR800 RAM. I've installed Windows Service Pack 2 and all the other updates. The video card is a Geforce 7950 GT, with the latest NVidia Forceware (93.7) drivers. I've had this problem with both the Audigy drivers on the CD that came with the card and the newest ones downloaded from this website. My motherboard is a Gigabyte GA-965P-DS3, which includes onboard sound hardware, but I have disabled it at the BIOS level. I can provide dxdiag information or anything like that if necessary. Does anyone have any advice, suggestions, or have you encountered a similar problem?Message Edited by DerekKatz on 2-04-200603:2 AM

    Thanks for the helpful reply Dan
    I ran the file, CTZAPXX.exe, like suggested, and it ran without a problem. It installed the files and even required me to reboot my computer!!
    However, after a computer restart, I am still in the same boat. Codecs are installed, but the location of the device is "unknown". In Device manager, there are no unknown devices; it shows the codecs in the sound tab, but no actual hardware; as if my sound card does not exist.
    I use my computer for music, and my buddy needs me tomorrow night to play some music stored on my computer. I really do appreciate the help I am offered. I do not mean to sound impatient, but I really need this device fixed, or I will have to have him buy me a sound card....

  • Weird issue with Windows Server 2008 R2 Print Server

    I have an issue with Windows 2008 R2 (VMWare Hosted) running Windows Print Server. 
    Prior to a small network change, the print server was working well, hosting about 80 different networked printers from various vendors. 
    We made a change (that we ended up rolling back) to the Client's DHCP Scope OPT 006 (DNS Servers). The DNS servers never quite worked right and broke AD authentication to different servers, and was just a mess.
    After rolling back we are not able to keep the printers online. If we ping them from the print server, the printer(s) never wake up, when a print job is submitted. If we ping them from one of the access switches, they work fine (until they fall back asleep),
    to prevent this, if we start a ping on the server AFTER waking them up from the Switch Ping, they stay online and no problems. 
    If we stop the ping, they fall back asleep at some point, and again, won't wake up without intervention/switch side ping. 
    Has anyone experienced anything like this? Any tips on how I could possibly resolve it? 
    Thanks in advance.

    Hi,
    According to your description, the issue seems to be that the printers can't keep online. Sounds like a power managerment issue. Why these printers fall into sleep? Have you consulted this issue with the manufacturer of these printers? Do these printers
    fall into sleep if them lose the contact with printer server? Have you tried to reset the printers?
    >>We made a change (that we ended up rolling back) to the Client's DHCP Scope OPT 006 (DNS Servers).
    DNS client will cache the recently queried records. If the DNS server has replied with a wrong records, communication issues will occur. To clear the DNS cache on a Windows device, please run the command below:
    ipconfig /flushdns
    Best Regards.
    Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Itunes issues with Windows having to do with Apple's patent

    I had a thought and am not sure if it's right. I was wondering if myissues with Apple Itunes store on Windows 7 has anything to do with the Patent laws and all with Apple and samsung and all that.

    I had the same issues with Windows 8 Consumer Preview. I installed on a fresh system and still had issues.
    I experienced extreme lag, with pretty much everything, and iTunes freezing once I attempted to change the currently playing song.
    I had a mess with compatibility mode and found out that running it in with Compatibility mode enabled for Windows XP (Service Pack 3) and as an administrator fixed it. It works now, however, there is a popup message that comes up on launch telling you to change the compatibility settings, but pressing "OK" makes it go away.
    How?
    Open Windows Explorer, and navigate to: "C:\Program Files\iTunes" (For 32bit) or "C:\Program Files (x86)\iTunes" (For 64bit), unless you changed it.
    Right-click on "iTunes.exe", select "Properties" from the context menu, and click the "Compatibility" tab.
    Under "Compatibility mode" check off "Run this program in compatibility mode for:" and select "Windows XP (Service Pack 3)" from the drop down menu.
    Further down under "Privilege level" check off "Run this program as an administrator".
    Click "Apply" and "OK".
    Should fix any issues, I have my default iTunes Media Folder Location within an external hard drive so unplugging all of my USB's wasn't an option.
    Hope I helped!

  • Itunes issues with windows 8... laggy?

    anyone one else having abit a of laggy issue with playing music on windows 8?
    i just upgraded to windows 8 con. preview, and its great and fast.
    i use to have windows 7 and itunes never skipped a beat.
    i have a sony viao with an upgraded ram and ssd hdd.
    and its pretty fast.
    so i dont think its my computer and windows 8 seems to be fine.
    anyone else having this issue? but it only happens now and then.......
    NOTE:
    i have my music all copied to my sdd hdd aswell
    and thats all thats really on there as i have ext. hdd's.
    i have a average size library in itunes with around about 50gb of music.

    I had the same issues with Windows 8 Consumer Preview. I installed on a fresh system and still had issues.
    I experienced extreme lag, with pretty much everything, and iTunes freezing once I attempted to change the currently playing song.
    I had a mess with compatibility mode and found out that running it in with Compatibility mode enabled for Windows XP (Service Pack 3) and as an administrator fixed it. It works now, however, there is a popup message that comes up on launch telling you to change the compatibility settings, but pressing "OK" makes it go away.
    How?
    Open Windows Explorer, and navigate to: "C:\Program Files\iTunes" (For 32bit) or "C:\Program Files (x86)\iTunes" (For 64bit), unless you changed it.
    Right-click on "iTunes.exe", select "Properties" from the context menu, and click the "Compatibility" tab.
    Under "Compatibility mode" check off "Run this program in compatibility mode for:" and select "Windows XP (Service Pack 3)" from the drop down menu.
    Further down under "Privilege level" check off "Run this program as an administrator".
    Click "Apply" and "OK".
    Should fix any issues, I have my default iTunes Media Folder Location within an external hard drive so unplugging all of my USB's wasn't an option.
    Hope I helped!

  • Qualcomm Mobile Broadband Gobi2000 compatibility issue with Windows 8 and above

    I am facing Qualcomm Mobile Broadband Gobi2000 competibility issue with Windows. Previously, after installing windows 8, I faced a problem of random shut down. But, after running registry and malware scan, it's now almost settled . But, my Broadband modem randomly stops working , and Windows Action Centre points it out as "USB Modem Qualcomm Mobile Broadband Gobi2000 is not competible with current version of Windows". It further suggest to contact HP for resolving the issue.

    I have called HP-Support and the answer was:
    «Thank you for contacting HP Active Chat Support.
    This is in continuation to our response with regards to your chat ID: 63381567
    As for the case logged in for compatibility issues after upgrading to windows 8.1, kindly try the steps below and see if that helps.
    Start the computer.
    Press the F10 key to enter the BIOS setup.
    Select Restore Defaults .
    Under Load Defaults , select Yes .
    Choose Save Changes and Exit .
    Under Save Changes and Exit , choose Yes .
    If Microsoft Windows does not recognize the external USB WWAN modem module, try the steps below:
    The Telephony Service has been disabled. Follow these steps to enable the Telephony Service:
    Open Control Panel .
    Expand View by: and select Large Icons .
    Click Administrative Tools .
    Double-click Services .
    Double-click Telephony .
    Under the General tab, expand Startup Type , then select Automatic .
    Click Apply , click Start , then click OK .
    Restart the system.
    If the issue still remains the same, kindly contact Microsoft or we would request you to be patient while we have more drivers available on the HP website.»
    The issue was not resolved.
    So I'm waiting for the release of the new driver...

  • Is there a known issue with windows 8 supporting itunes?

    each time I update itunes I lose my itunes store connection and therefore can't update apps etc. Is this a known issue with windows 8 users?

    Yes. Some are complaining.
    Search iTunes.exe. RIght Click, Properties, Compatibility, Click Run this program as Adminitrator. OK.
    See if this helps

  • Where is the forum for Windows Update issues with Windows 10 TP 9926

    Trying to find a fix to the Windows Update issue with Windows 10 TP 9926 build and can't find the correct forum to post this question?
    This will impact receiving the new build upgrades and will impact test strategy for the new supported OS in our desktop application.

    Might try them over here.
    http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1427037339534
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • URL issue with Windows 7 Internet Explorer 11 and SAP NW PI 7.

    Hello SAP community,
    I am facing a strange issue with Windows 7 - Internet Explorer 11 and SAP NW java services (I hope I am in the correct discussion) ...
    When I try to open URL http://sapserver.hosters-name:port it is working so far with Windows 7 and Internet Explorer 11.
    But when I click than on NWA (example), I am getting "http 500 server error".
    I don't have the issue, when I start-up a VMware Workstation with Windows XP and Internet Explorer 8.
    But now the strange part: In our network DNS (Domain Name Service), we can also open the URL by http://sapserver.our-dns:port.
    Than it is working without problems with Windows 7 and Internet Explorer.
    I would agree to state the comment - it is just a Windows 7/Internet Explorer 11 issue, if it wouldn't work for both URLs (http://sapserver.hosters-name:port = problem URL; http://sapserver.our-dsn:port = working).
    We are using a SAP NW PI 7.x system. Some URLs for PI are using http://sapserver.hosters-name:port/java service.
    Do you have any hints what is cause the issue - I suspect some with Internet Explorer and Firefox (because with Google Chrome at least the URL for NWA is opened, beside the issue, Google Chrome can't display NWA content)?
    Thanks for your help.
    Best regards
    Carlos

    Hi all,
    I think I found the solution.
    The reason seems to be, the domain name for http://sapserver.our-dns:port, "our-dns" was already added to the compatibility view settings of Microsoft Internet Explorer.
    That seemed to be the reason, why it was working with http://sapserver.our-dns:port.
    When I now added for http://sapserver.hosters-name:port the domain "hosters-name" to the compatibility view settings it is now working.
    Internet Explorer Options => Settings for compatibility view => Add domain
    Best regards
    Carlos

  • When will there be an itunes update that resolves the compatibility issues with windows 8

    When will there be an itunes update that resolves the compatibility issues with windows 8

    I hadn't heard there are issues.  Can you tell me what the issues you have run into are?  I just downloaded it yesterday on my new laptop and I am having issues syncing today...

  • HT4946 audio issue with iphone 4 with video recording

    audio issue with iphone 4 with video recording

    http://www.iphonebackupextractor.com/
    Basic troubleshooting steps.
    Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
     MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

Maybe you are looking for