Audio issues since Snow Leopard 10.6.8 and Lion update

My problem since the update 10.6.8 of Snow Leopard and also after updating to Lion, has been that after playing a surroundsound movie or some kind of audio 5.1 all of the audio from the (in my case) mac mini, except for another 5.1 soundsource stops working.
I know that many people experiences similar problem, some people have no audio at all and some people have the problem the other way around, after playing a 2.0 soundsource no 5.1 soundsource is audioable. And it seems that the SL update or Lion is the key to this problem.
I dont know if there is some kind of fix for this or it's just to sit back and wait for another update?

There has been an update release for 10.6.8 that
supposedly fixes things. Some have said that
some of the fixes done for 10.6.8 work for Lion.
They do require messing with system files though.
May just want to wait for an official Lion update.

Similar Messages

Aperture Upgrade Issues (since Snow Leopard Install)

I upgraded the OS on my 2007 iMAC7,1 Intel Core 2 Duo 2.4 GHz to Snow Leopard a couple of months ago. Afterwards, when I tried to start Aperture, I got a message that my version of Aperture (1.5.6) was not supported under the new OS.
So today, I went to the Apple store and bought an upgrade to Aperture 2. The upgrade version is 2.1.1. I installed this and when I start Aperture, the app appears to start, the "intro" white screen comes up with the version / serial number, etc, and then the Welcome Screen starts up.
No matter what I choose from the Welcome Screen (Usually I pick Start Using Aperture), the SW appears to be stuck. The welcome screen disappears as expected, and the command bar across the top of the screen appears, but that's it - the normal aperture screen that shows your projects, etc. never comes up. Most of the commands in the sub-menus on the command bar are grayed out.
To make matters worse, when I try to quit, nothing happens. No message, no nothing, it just sits there. I have to do the Option-Cmd-Esc sequence and kill Aperture.
I checked for SW update and updated everything that was available (OS and Aperture to 2.1.4), rebooted, etc. However, there was no change in behavior.
Everything else on this machine works fine, no other issues or even behavior changes in my machine. The only problem is with Aperture.
To summarize: Aperture 1.5.6 quit working after I installed Snow Leopard. I bought the Aperture upgrade and installed, which allows me to start Aperture but doesn't let me do anything further.
Has anyone else seen an issue like this? Any suggestions for what may be wrong?
Thanks.

You may want to try rebuilding the library or doing a consistency check. Hold command-option when you launch Aperture and choose the relevant options.
Note that Aperture 2.x will have to upgrade the library from 1.x to run. You should get a dialog box to kick this off (and it does take some time), but it sounds like you haven't even gotten that far.
You do need to be running Aperture 2.1.4 on Snow Leopard, but from your description it sounds like you're already on that version.

What happens to iweb-built site when I upgrade from Leopard (10.5.8) to Snow Leopard (10.6.3), and subsequently upgrade to 10.6.8 or even 10.7? Will fonts stay the same? Will layout change? Or anything else change? Thanks

What happens to iweb-build site when I upgrade from Leopard (10.5.8) to Snow Leopard (10.6.3) and subsequently update that to 10.6.8 or even to 10.7? Evidently iweb has been discontinued. I have version 3.0.3 of iweb now but understand that there's been an update for OS 10.6 so same question goes for this update.
Will fonts change? Will layout change? Will widgets still work? Links? Will Google Analytics PlugIn still work?
(Since MobileMe is disappearing, I now save iweb site to local folder on my computer, then upload it to GoDaddy using Cyberduck. I run Google Analytics plug in on folder before its uploaded.)
My computer, MacBook Pro came with iweb, which has been updated to 3.0.3. Since iweb is discontinued, will upgrade of operating system just ignore iweb so that iweb will run the same as before? Or will it wipe it out? Or change how it currently works (questions above).
Thanks

As you now know iWeb and iDVD have been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. HOWEVER, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
Currently if the site is published directly from iWeb to the 3rd party server the RSS feed and slideshow subscription features will work. However, if the site is first published to a folder on the hard drive and then uploaded to the sever with a 3rd party FTP client those two features will be broken.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: iW14 - Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
NOTE: the iLife 11 boxed version Is no longer available at the online Apple Store. To get a copy you'll have to try Amazon.com or eBay.com.
This may be of interest to you: Life After MobileMe.
OT

Continuing font encoding and tag issues with snow leopard and CS4oI

I am looking for help with a font handling issue with snow leopard and cs4 Indesign. Despite numerous calls and hours on the phone neither Apple nor Adobe has been helpful. I have had this issue open with Adobe since oct 5 but they remain totally unresponsive to date. I need to be able to use Type 1 fonts and do the following , export a pdf from Indesign with the following attributes: 1) xml tags for stories and objects. 2) have the fonts encoded as ansi and embedded.
Some additional information - exporting to ps is not an option as it destroys the xml tags. and doesn't guarantee that the fonts won't become CID or some other odd encoding.
As it stands now,
Leopard (10.5.8) and CS3 creates ansi encoded fonts with xml tags.
Leopard (10.5.8) and CS4 creates ansi encoded fonts with xml tags.
Snow leopard and CS3 creates ansi encoded fonts and xml tags
Snow leopard and CS4 creates custom subsetted fonts and some xml tags.
If any one has any advice on how to force specific font encodings from CS4 pdf exports so that i can preserve the tags and get the correct fonts I would be grateful.

The font encoding is not a function of the OS version, but rather of how a font is internally encoded and the content you are representing with the font.
If you are seeing a difference between MacOS 10.5 and 10.6 with the same Adobe software, it probably has something to do with use of a system font that is somehow different from one version of the OS to another. InDesign does not use any of the OS' font handling software.
Assuming that the fonts are embedded, subset or not, what is your issue with whether a font is ANSI-encoded, custom-encoded, or CID-encoded? It should make no difference for purposes of workflow beyond InDesign for software that adheres to the PDF specification (including all versions of PDF from 1.3 and up to 1.7 plus ISO 32000-1 PDF and all versions of PDF/X and PDF/A).
Neither InDesign or any other Adobe application provides user choices for the encoding since it shouldn't make a difference. The encodings chosen by Adobe's core technology components are for a combination of optimization and to support proper text search, copy, etc.
- Dov

Since Snow Leopard, Mac Pro will not sleep with Apple wireless keyboard

I have an odd problem, now on 2 Mac Pro (Nehalem) with 10.6.1:
Since Snow Leopard, the system will not sleep as long as a) the user is logged on (any users/profile) and b) the Apple aluminum wireless keyboard is 'attached'.
If I log off first, sleep works fine. If I turn the keyboard off first, it's fine. But if hitting 'sleep' when logged on, the screen turns dark, sleep process begins, but the system comes right back (with a note 'keyboard disconnected'.
It's as if the keyboard disconnects after sleep, but the system still monitors it, and wakes up.
Note: Wake for bluetooth devices IS NOT ENABLED!
Here is the console log (relevant info):
10/18/09 4:57:33 PM kernel System Sleep
10/18/09 4:57:48 PM kernel Wake reason = UHC1
10/18/09 4:57:48 PM kernel System Wake
10/18/09 4:57:48 PM kernel Previous Sleep Cause: 5
10/18/09 4:57:48 PM kernel USB (UHCI):Port 1 on bus 0x1d has remote wakeup from some device
10/18/09 4:58:53 PM kernel System Sleep
10/18/09 4:58:55 PM kernel Wake reason = UHC6
10/18/09 4:58:55 PM kernel System Wake
10/18/09 4:58:55 PM kernel Previous Sleep Cause: 5
10/18/09 4:58:55 PM kernel USB (UHCI):Port 1 on bus 0x5a has remote wakeup from some device
Does anyone have any idea? While on, the keyboard never disconnects - i.e. I don't have any other issues with BT or the keyboard (this is the 2nd I tried).
Also, my apologies for double-posting this earlier in a different forum; cheers!
Thanks,
Dan

Hi,
and thanks for posting that.
That's too bad. I am probably going to log off if needed, rather than going wired, but I can't believe that this might be more prevalent than just me and there is no 'fix'...
Anyone ?!
Thanks as always,
Dan

Fstab causes .dmg mounting issues in Snow Leopard

I am having this odd issue is Snow Leopard with fstab. If I use valid partition UUIDs in fstab to regulate mounting, then .dmg volumes do not get mounted properly (or at least get mounted in such a way that Finder has issues). After mounting, the .dmg volume is greyed out in Finder, but any subdirectory of the root directory of the volume can be accessed using the Go To option. After mounting, there also appear two alias for the volume on the desktop neither of which do anything.
Looking at mount after mounting a .dmg I get:
/dev/disk1 on /Volumes/Pacifist 2.5.2 (hfs, local, nodev, nosuid, read-only, noowners, quarantine, mounted by yarmola)
Which is normal.
I can access the volume through terminal without any issues as well. If I unmount the volume (via hdiutil or Disk Utility for example) it unmounts, but the two aliases on the Desktop remain and do not disappear.
My fstab simply looks like this:
UUID=6B12B7BA-4469-3344-8121-1939A6B0219F /Library/Mounts/Protected/SCUBA hfs rw
If I remove that, or change it to use LABEL or to a non valid UUID (i.e. one that is not a non-root partition UUID) then .dmg volumes mount fine. The actual partition filesystem does get mounted.
In system log I get the following error messages:
Oct 23 15:05:18 rdev-cl-19-imal hdiejectd[642]: running
Oct 23 15:05:20 rdev-cl-19-imal com.apple.KernelEventAgent[52]: KernelEventAgent: sysctl_queryfs: Operation not supported on socket
Oct 23 15:05:20 rdev-cl-19-imal mds[50]: (Error) Volume: sysctl_queryfs failed: Operation not supported on socket
Any ideas?

It's possible the dmgs are not compatible with your verson of SL or even with SL. The latest version is OS 10.6.7.
Did you read the system requirements of the files you are trying to download?

If you are having WIRELESS issues with SNOW LEOPARD.. update your software

the latest osX update seems to have fixed the wireless issue with snow leopard

I never had an issues with wireless before. Still don't. What was the problem?

Font Issues with Snow Leopard 10.6.1

I recently upgraded to Snow Leopard 10.6.1 and have noticed a strange thing happening in Illustrator CS4. When I edit any text in "Preview" mode, the changes don't take. But if I switch to "Outline" mode, the text has changed. Back to "Preview", it hasn't. If I save the document, close it, and reopen it, the changes reflect in the "Preview" mode. Very weird!
Is anyone else experiencing this strange thing happening?

No ! Here!

Home sharing does not work after update to snow leopard 10.6.4 and iTunes 9

I am using home sharing since about a year without any problems. After updating to snow leopard 10.6.4 and iTunes 9.2 it suddenly does not work anymore.
On my iMac and my Mac Book Pro I get error code 3259 and it tells me to check my firewall and to enable Port 3689.
I did not change anything in the firewall settings, itunes on both allows data traffic in both directions. I also do not find any option to activate a port ( also wondering why this is suddenly now necessary)
I deactivated home sharing on both machines and enabled it again. It still does not work.
On both machines iTunes displays the the library on the left side but like said it is not accessable
With Finder I can access the other computer from both machines without any problem.
Any help to solve this would be very much appreciated

first of all, if you are behind a router firewall, and have your network secured (WPA2 and a long, non-dictionary password made up of letters and numbers), you don't need the software firewall on your Mac(s).
@ least turned if off for troubleshooting purposes.
turn home sharing off on both computers, and make sure
(a) both Macs have access to the internet
(b) iTunes on both machines is authorized for the same iTunes account.
turn home sharing back on on both Macs.
does it work ?
JGG

Snow Leopard, PHP, MySQL, Apache and Wordpress!

Hi there,
It's taken me most of the day to work this out, so I thought I should post about it somewhere and here, on the Apple forum, is the ideal location.
I'm a web developer and love the fact that my MacBook works out of the box with a Unix webserver and with little effort, I was able to set up PHP and MySQL on it. I was delighted to hear that the new Snow Leopard was shipping with the latest and greatest of both. It wasn't quite that easy when it came down to running my test sites, one of which I'm working on is a Wordpress site. Far from being daunting, the solutions to the problems I had were quite simple. The issues arose from the OS not having much exposure yet and not many people having posted their experiences on the web. It was just time consuming.
I should mention at this point that this does require some tinkering with Terminal, but not so much as to cause damage if you do something wrong.
First off Apache. Thankfully this is as stable as it always has been. All this requires to activate it is to visit System Preferences > Sharing and switch on Web sharing. Bish-bosh, job done.
Next off PHP. If you open a Safari window and run your phpinfo.php file (where ever you have it saved. If you don't, they're out there, it's a tiny piece of code which you can use to find out your current php setup). You'll find that everything is superb! PHP 5.3! Excellent! Hang on, scroll down to the date and time section. Whoa! What's this big fat warning here.
That warning my friend, has been the bane of my misery all day. Wordpress hates it. HATES IT! It causes no end of grief. So what's the multi step, multi program solution?
Open your php.ini file and add the line:
date.timezone=Country/City
(do a Google search for PHP Timezones and you will get the exact settings. It's not so good that it understands every city in the world. My setting was Europe/Dublin).
That's all. This will solve your issue of the timezone error everywhere. Stop and start Apache (System Preferences > Sharing, tick off and tick back on Web Sharing) and hey presto, error is gone.
Wait a minute, where the **** is my php.ini file. Unfortunately this is where you have to get your hands dirty. Your php.ini file is a system file which resides in the /etc/ folder. Open a terminal window and type exactly the following:
cd /etc/
cp php.ini.default php.ini
This makes the php.ini file from the default. This protects the original so if you ever need to create a new copy or if you make a mistake in the next steps, you can start again.
Next I'm going to tell you how to edit this file. This uses a program called vi (there are GUI editors out there that will save you this heartache, so if anyone knows any, please post in response. I think TextWrangler is one).
First you need to set the php.ini file so you can edit it. Type in exactly as follows:
sudo chmod 777 php.ini
Sudo is the superuser commmand. It may not be needed, but stick it in anyway. If you are asked for a password, put in your normal password (that you would be asked for say if you were installing something you downloaded).
At the next prompt, type in:
vi php.ini
This will open the php.ini file. Using the up and down keys, find a blank line in the file. You will notice that alot of the lines start with ';'. These are commented lines. Once you find a blank line, press 'i' to insert text. Your screen will now say '-- INSERT --' at the bottom in red. Type the following in exactly (you will NOT be able to cut and paste):
; Set PHP Default Timezone
date.timezone=Europe/Dublin
Substitute "Europ/Dublin" with your own timezone. When you are done, press escape. Now type in the following:
:wq!
The colon is important (not a typo on my part) as this tells vi you are going to run a command. You should now be back at your prompt. Now you need to reset the permissions on the file. Type the following:
sudo chmod 444 php.ini
And that's it. That's your PHP setup and finished. If you run your phpinfo.php file now, you should see your timezone under the date and time where you were getting the error before.
Now the MySQL. This is a bit of fun because, even though MySQL ships with the system, it's not exactly set up correctly! So once again into terminal.
This time go to the local directory:
cd /usr/local/
If you type in:
ls -al
You'll get a directory listing. This has the MySQL folder listed as mysql-5.0.77-osx10.5-x86 (or something! I did that from memory!). This IS the MySQL folder but if you, like me, had previously set the MySQL Preference Pane in your System Preferences, then it won't be able to access this. Type the following command:
sudo cp -R /usr/local/mysql* /usr/local/mysql
This should copy everything into a folder called mysql. It takes a couple of seconds (first time on my machine it was a good 20 seconds) to run so be patient. Now you need to do the following:
sudo chown mysql:mysql /usr/local/mysql
This sets the owner and group of the mysql files to 'mysql'. If you go back to your MySQL preference pane in System Preferences, you should now be able to start it (something weird about it makes it require to close and reopen the System Preferences window before it can open the MySQL pref pane. This is normal, just click ok).
The bit that got me here, is that I thought that my activation of the MySQL was actually a new install. I tried everything to change the root user and password for MySQL but in fact, if you had it installed on Leopard, prior to upgrading to Snow Leopard, all your users and passwords are the same. If you HAVEN'T installed it before, I recommend you read the Post Installation Customisation (section 2.3) on the manual for MySQL 5.1 on http://www.mysql.com
So that's about it. All that remains is to test Wordpress. I have phpmyadmin installed (I've heard CocoaMySQL is very good, like iTunes for db's so I'm gonna check that out later) and was able to create the new wordpress database. I changed the settings in the wp-configure.php file to match my setup but nothing worked. I changed the host from '127.0.0.1' back to 'localhost' (a common complaint of the wordpress setup) but no joy. Then I changed the host back to '127.0.0.1' and added the port :3306 (so the full host is '127.0.0.1:3306') and bingo, the install worked, my database setup and my test site worked.
So that's it! Many of you out there will say, why didn't you just use MAMP. I did use MAMP, but I also got the Timezone issues and it took far more tinkering and hacking to make it work. I decided that, as my lovely MacBook now running lovely Snow Leopard had the lovely newest versions of PHP and MySQL installed, I'd rather get them working than use a runaround with MAMP. I'm a happier camper for it.
I hope this helps some of you out there. I don't personally have a blog yet, but when I do, I'll post this up there for all to access. I may even add screen shots!!! But seriously, I hope this helps you all out with your installs. It's so handy to have all this stuff straightaway with Snow Leopard, it's just a matter of getting it to work.
All the best now,
T

Hmmmm... I did a clean drive install of Snow Leopard because I used to do it once a year with Windows and hadn't done it in 3 with my MBP.
First, my httpd.conf file had the line enabling PHP commented out, so when I went to see my simple file with phpinfo(), I saw the source. Saw your post, thought it was the timezone, fixed that (which will probably make wordpress happy when I get it running), and it still didn't work. Looked at the httpd.conf file, found that PHP was disabled by default, fixed that line, restarted the server, and my phpinfo() worked like a charm.
Also if you want to edit config files, I use TextWrangler's "open hidden files" option.
But... I have no /usr/local directory at all. Doesn't exist on my machine. Checked the options in the base install and MySQL isn't offered as an option. Checked the optional installs and MySQL isn't there. Even letting spotlight search for hidden files, the only files with MySQL in their name were from php scripts in my web folders.
There's some stuff about installing/compiling from source.
http://hivelogic.com/articles/compiling-mysql-on-snow-leopard/
Dunno if I want to go down that road quite yet.

How can I tether via USB my iPhone 4S with iOS 7.1.1 to my MacBook with Snow Leopard 10.6.8 and iTunes 11.2.2 ?? Please note that at the same time Personal Hotspot via both WiFi and Bluetooth works perfectly!

How can I tether via USB my iPhone 4S with iOS 7.1.1 to my MacBook with Snow Leopard 10.6.8 and iTunes 11.2.2 ?? Please note that at the same time Personal Hotspot via both WiFi and Bluetooth works perfectly!

Hello, lustige luka.
Thank you for visiting Apple Support Communities.
The Personal Hotspot feature using USB should be as simple as connecting the device to your Mac via the USB cable when Hotspot is enabled. Here is some more information regarding this feature and an article that will provide some troubleshooting steps if you are experiencing an issue.
iOS: Understanding Personal Hotspot
http://support.apple.com/kb/ht4517
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/kb/TS2756
Cheers,
Jason H.

I currently have Snow Leopard 10.6.8 and I want to upgrade to Lion 7.4. I see no upgrades available to get there. Can someone help me?

I currently have Snow Leopard 10.6.8 and I want to upgrade to Lion 7.4. I see no upgrades available to get there. Can someone help me?

WZZZ wrote:
Maybe they've pulled Lion temporarily in order to clear server bandwidth for the expected feeding frenzy over ML?
There's always that possibility but I suspect that any Lion purchases today will be just a drop in the bucket. Still, there really ought to be some provision for those whose Macs can't go beyond Lion to upgrade since continued Snow Leopard support is now in question (the reason I finally moved to Lion).
There are a lot of people complaining that their free upgrade redeem codes for ML aren't working so I bet keeping Lion available is way down on Apple's to-do list.

I am running Snow Leopard on my iMac and have partitioned my hard drive to run Windows XP. If I upgrade to Yosemite, will I still be able to run XP?

I am running Snow Leopard on my iMac and have partitioned my hard drive to run Windows XP. If I upgrade to Yosemite, will I still be able to run XP?

bobfromnorth battleford wrote:
...Now what happens if I upgrade to Yosemite on either my iMac or my MBPro?
If I install VM Fusion or Parallels, does Windows run all the time? How does that affect computer performance? and how much do I need to worry about hard drive corruption?
Current versions of Fusion and Parallels are compatible with Yosemite. Both are applications which you only run when you want to run Windows within them. As such, there's no effect on computer performance when they're not in use. Like any other software, there is some additional load on your Mac when both Windows and the Mac OS are running together, but any noticeable effect depends on what each is being expected to do and what resources (e.g. available RAM and the number of CPU cores) you can devote to each.
I think there's less chance of HD corruption with a VM than there is with running Windows natively on the Mac in Boot Camp. Consider that, with a VM, you can create Snapshots of the state of your VM at a given time, and then, if something goes wrong (virus, malware, software installations), you can simply restore the Snapshot in a matter of seconds and eliminate the problems in the process. Moreover you can make a backup copy of the entire VM file, and replace a later version if you wish. Also consider that you can assign, say, 100GB of HD space to the VM, but the actual space devoted to the VM is only what's actually used; as more is needed, more is made available and Windows can't tell the difference. So, for example, my Win 7 Pro VM has an 80 GB virtual HD but only takes up 45 GB on my SSD, and that's with XP Mode in VPC installed inside it.
Microsoft no longer supports XP, though virus signature updates are still being issued. But MS has installed a pop-up message about EOL that won't go away (it's installed with KB2934207). Even if you remove that KB in Add and Remove Software, the pop-up continues. But if you have a Snapshot or a backup which is prior to it's original installation, you can skip installing KB2934207, and suppress it's reappearance on a Software Update list.

HT1338 My macbook came with snow leopard, if I upgrade to Lion will I be able to use my restore disks in the future and if I do use my disks that brings me back to snow leopard, Will itunes remember I purchased Lion or will I have to purchase a second ti

My macbook came with snow leopard, if I upgrade to Lion will I be able to use my restore disks in the future and if I do use my disks that brings me back to snow leopard, Will itunes remember I purchased Lion or will I have to purchase a second time ?

At this point, you can no longer download Lion (10.7) from the App Store, only Mountain Lion (10.8) - make sure all your applications are fully compatible if you decide to upgrade.
Yes, you can restore 10.6 using your restore disc should you wish to - and the App Store (not ITunes) will have a record of all your purchases, since it's linked to your AppleId.
Matt

Is it possible to install Snow Leopard on a PC and to run it with two Nvidia Quadro Cards and 8 Screens?

Is it possible to install Snow Leopard on a PC and to run it with two Nvidia Quadro Cards and 8 Screens?

Furthermore, all new Macs since 2006 have been able to have Windows or Linux installed on them natively with virtualization engines*:
http://www.macmaps.com/macosxnative.html#WINTEL
You may even want to consider a used Mac Pro*:
http://www.macmaps.com/usedrefurbished.html

Audio issues since Snow Leopard 10.6.8 and Lion update

Similar Messages

Maybe you are looking for