Audio issues with Recording analog source

I'm trying to connect a turntable via the input/output (headphone) jack on the side of the monitor. No luck. Why?
Connecting via USB works, but I can't monitor the incoming signal (using mic input), no matter how I tweak the Windows audio mixer (as well as the software I'm using to record.
Very very frustrating. I'm afraid the single in/out jack is the problem, as my previous HP didn't have this problem.
thanks in advance!

The click can be found on the transport bar with the play stop rewind functions etc, the transport bar is normally at the bottom of the project, with the metronome being on the right hand side
If your recording multiple tracks at the same time, you need the relevent amount of tracks open, with each one being assigned a relevent input from audio source coming.
For example you want audio track 1 to have the audio coming from the guitar which may be input 1
Hope this helps

Similar Messages

HT4946 audio issue with iphone 4 with video recording

audio issue with iphone 4 with video recording

http://www.iphonebackupextractor.com/
Basic troubleshooting steps.
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
 MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

Issue with 2LIS_02_SCL Data source

Hi Everybody,
I am facing the below 2 issues with 2lis_02_scl data source,
1) This is fetching only the records ETENR (Delivery Schedule Line Counter) value with ' 1 ', It is ignoring others ex:2,3 and 4. Hence Data is not reconciling with ECC system.
2) The standard field GLMNG is not getting any data, Data was existed in table(EKET) level. So i have written the code and data is coming now. But the problem is, This is not considering the ROCANCEL indicator it seems. All the other key figures values are coming in with Negative sign When ROCANCEL Value is ' X ' or ' R ', But this field is getting all the positive values irrespective of ROCANCEL indicator. Hence showing the incorrect values compared to the ECC.
Can anybody help me on this,
Regards,
Gopinath

Hi Gopinath:
Have you already applied any SAP Note to solve this problem?
Please check if the SAP Note below is applicable to your system.
668177 - "LIS BW: wrong quantity for documents with invoice plan"
Regards,
Francisco Milán.

Sound / Audio issues with Google Chrome

Hi guys,
I have this audio issue with a new Macbook Air (2013 base model).
When I stream audio / video (eg podcast, YouTube, NBATV) via Google Chrome, there is the static or clicking sound which you could hear both through the built in speakers and through the headset.
Brought it in to the Apple Store yesterday and they acknowledged the sound on Chrome. HOWEVER when using Safari, this clicking / static sound is no longer audible. I can probably record an audio clip to demo this further. The genius concoluded that this is probably an issues with Chrome or codecs that its using rather than the actual laptop. No replacements at this stage.
I have an old MBA 11” where this issue does NOT occur.
The hesitation in using Safari is Flash. Some video streams such as NBATV, which I watch quite frequently use Flash. Chrome handles this quite well, with no separate installs required.
Has anyone else encountered this? Not sure if I can pursue this issue further with Apple.

Chrome shockwave flash plugin issue causing sound problems on the macbook:
Shockwave Flash 11.5 r31 (old version)
Shockwave Flash 11.5 r502
disabling r31 solved it.
Many people have checked their chrome plugins and found they had two plugins enabled. They disabled the older one and audio is perfect.
-Go to chrome://plugins
-Click and expand +Details in the Upper Right
-Check over the flash files.
-One is version 11.3.31.222
-Disable the odd version and reload the flash content
For some reason, CHROME has allowed two flash plugins to be enabled at the same time, and clearly the older version is the one causing the problems.
go to "Chrome://plugins" tab. Click “Details” at the upper-right corner of the page.
Find “Shockwave Flash” listing for the integrated plug-in on the page and click the corresponding “Disable” button. To identify the integrated plug-in, see the table of plug-in filenames above.
Find the “Flash” (or “Shockwave Flash”) listing for the system plug-in on the page and click the corresponding “Enable” button. To identify the system plug-in, see the table of plug-in filenames above.
disabling Shockwave Flash 11.4 r31 resolved the problem for most people.
When people double checked: if they re-enable Shockwave Flash 11.4 r31, ....the distorted / broken audio happens again.
Hope that solves it for you

Issue with Pro Res sources when encoding in Media Encoder.

There seems to be a big issue with Pro Res sources in Media Encoder. I've noticed that when exporting using the 'software only' mode my graphics and titles look horrible, they are pixelated around the edges and the compression looks bad. This issue only happens when it's being made from a Pro Res source, if I make the exact same file Uncompressed this issue is resolved. If I use the 'Cuda' option (which I already know is the better option) this issue is resolved. The thing is, in a work environment not all of our systems are Cuda enabled and I would like to use Media Encoder as a exporting option overall. I love Media Encoder, it's fast and easy to use but this Pro Res issue is huge because the majority of the time we are working in Pro Res. I also did a test out of Avid Media Composer to Media Encoder, I sent a reference file referencing the Avid MXF material and the issue is gone, this seems to my knowledge to be a Pro Res only issue. The settings I am exporting to is 960 x 540 h.264 and also .mp4. This is coming from a 1080p source and yes I do have the 'maximum render quality' checked for best scaling. I understand that Software only vs Cuda and Open CL use different algorithms when scaling but this seems crazy to me that it would look this much worse.
Anyways if somebody can please look into this that would be great, this seems to be an issue where I can't continue at this moment to use Media Encoder. Making my source files Uncompressed every time to do an export is just not a real workflow I want to do.
On a side note I've also recently noticed on a clip that had text over a grey background that there are lines going all down the screen evenly when exporting to even a non scaled 1080p .mp4. Once again, this issue goes away with any format but Pro Res. The weird part is this happens even with Cuda enabled. This is why I am thinking Media Encoder is having some sort of issue with the Pro Res codec.
I am on a current new 27'' fully loaded iMac with the latest Adobe CC updates.
Has anyone else experienced this?
thank you

No, it is why advance users do not use the wizard.
Have a look at OpenOffice.org and its form creation. Once you add your fields in OpenOffice.org, just export to PDF and the form fields will be named just like you named in them in OpenOffice.org and the drop down values carry over.

Vista 64, Latest Driver & X-Fi Elite Pro: Audio issue with Pro Evolution Soccer 2008 (Pes 20

Hi,i have formatted XP S.P.2 and now i'm using Vista Ultimate 64.I have got an X-Fi Elite Pro and i have installed all the applications using the CD-Rom.I updated the driver, Alchemy and Mediasource to the latest version.The system is totally clean and updated (I used Windows Update when i finished to install Vista and nothing was installed). I would like to know why i cannot play Pro Evolution Soccer 2008 like in XP: when i enter in the game i have a noise (looks like the noise of the needle in old gramophones...) and i cannot use the speakers (Creative ProGamer G500).If i turn the volume to 0 i can hear it too... i have to switch off the speakers or exit the game to delete it.Is it another bug I tried to uninstall and doing a new installation of the game but... no way men... Thanks p.s.After year and 4 months (release date of Vista) is it possible to have a decent driver... The Audio Quality in Vista Ultimate 64 bit is lower than in XP and the same wave files have distortion with the low and middle-high volume (60-70).
Problems that i have never had in XP... i cannot reinstall XP another time. I bought Vista in 2006 and i cannot use it till you'll release a good sw.
Have we to wait till 200 for a fuc.ing working driver
My Hw.: Intel Core 2 Quad 6600, DFI Lanparty DK, 2GB DDR800 Team Group, X800XT 52MB, Enermax Noisetaker 600W, Creative X-Fi Elite Pro, Creative ProGamer G500, Plextor PX76SA, Logitech G5 and G5.

The problem is now official: other customers have problems with some games (Pes 2008 and Crysis in particular). I'll show u the main italian hw. forum. There is a thread of more than 500 pages just about Creative X-Fi: http://www.hwupgrade.it/forum/showth...42043&page=550 I would like to know if u test drivers before sharing... because i don't know what you did in more than year.You should meditate, people... I paid more than 400 $ for an Elite Pro and after year and 4 month i cannot install Vista 64 too for audio issues with mp3-wave files and Pes 2008 or Vista 32 bit for problems with Pes 2008. This is my latest Creative product, you can trust.

Facetime Audio Issues with Logitech Webcam

I have been experiencing audio issues with Facetime with my Apple Mac Mini A1283 and Logitech Webcam Pro 9000 ever since I upgraded to Mac OSX Yosemite 10.10. The webcam worked fine before upgrading to OSX 10.10 and 10.10.1. During Facetime calls my the video works okay, but the audio makes me sound like "Alvin and the Chipmunks" and the other person on the receiving end sounds high pitched, as well. Other apps work just fine (i.e. Skype), just Facetime. I tried upgrading to 10.10.1, but the issue has yet to be resolved. Apparently I am not the only one experiencing this issue.
Re: external usb microphone not working with FaceTime and mac mini with os x Yosemite
http://www.tonymacx86.com/general-help/144038-facetime-yosemite-audio-phone-call -issues.html
Please look into this issue as I have already contacted Logitech, as well.

conductor4609 wrote: ... Please look into this issue as I have already contacted Logitech, as well.
Submit your FaceTime feedback directly to Apple via Apple's OS X Product Feedback.
As explained in Tutorials, posting here is primarily "... to get help with Apple products from other users... "
Message was edited by: EZ Jim
Mac OSX 10.10.1

Xi-Fi Issue with recording

Im am recording in nuendo and Im using the creative asio driver. When I record a track on track one all is good. However, when I go to track two and hit record, it wants to record the play back on track one. I cannot play a track and record on a separate track without the first track being recorded also. How do I multi track record with the creative XI -FI ($199.00) setup. I also have an audigy zs sound card that I have no issues with. However my inputs seem to have stopped working after I swapped out motherboards. So I went out and purchased this creative XI-FI setup.
PLEASE HELP!

kbone wrote:
Im am recording in nuendo and Im using the creative asio driver. When I record a track on track one all is good. However, when I go to track two and hit record, it wants to record the play back on track one. I cannot play a track and record on a separate track without the first track being recorded also. How do I multi track record with the creative XI -FI ($199.00) setup. I also have an audigy zs sound card that I have no issues with. However my inputs seem to have stopped working after I swapped out motherboards. So I went out and purchased this creative XI-FI setup.
PLEASE HELP!
WHAT? Is there this "What U Hear" option on X-Fi too???
Just change the recording source to the one you're recording from (I can't say how because I do not have the X-Fi card). This can be done on Audio Creation Mode settings panel (I suppose). On Audigy .rec source shall be set to AnalogMix(...) or Microphone normally.
jutapa

Performance issue with Oracle data source

Hi all,
I've a rather strange problem that I'm stuck on need some assistance on.
I have a rules file which drags data in via an SQL data source thats an Oracle server. If I cut/paste the 3 sections of "select" "from" and "where" into SQL-Developer and run the query, it takes less than 1 second to complete. When I run the "load data" with this rule file or even use the "Retrieve" with the rules file edit, it takes up to an hour to complete/retrieve the data.
The table in question being used has millions of rows and I'm using one of the indexed fields to retrieve the data. It's as if the Essbase/Rule file is ognoring the index, or I have a config issue with the ODBC settings on the server that is causing the problem.
ODBC.INI file entry for the Oracle server as follows (changed any sensitive info to xxx or 999).
[XXX]
Driver=/opt/data01/hyperion/common/ODBC-64/Merant/5.2/lib/ARora22.so
Description=DataDirect 5.2 Oracle Wire Protocol
AlternateServers=
ApplicationUsingThreads=1
ArraySize=60000
CachedCursorLimit=32
CachedDescLimit=0
CatalogIncludesSynonyms=1
CatalogOptions=0
ConnectionRetryCount=0
ConnectionRetryDelay=3
DefaultLongDataBuffLen=1024
DescribeAtPrepare=0
EnableDescribeParam=0
EnableNcharSupport=0
EnableScrollableCursors=1
EnableStaticCursorsForLongData=0
EnableTimestampWithTimeZone=0
HostName=999.999.999.999
LoadBalancing=0
LocalTimeZoneOffset=
LockTimeOut=-1
LogonID=xxx
Password=xxx
PortNumber=1521
ProcedureRetResults=0
ReportCodePageConversionErrors=0
ServiceType=0
ServiceName=xxx
SID=
TimeEscapeMapping=0
UseCurrentSchema=1
Can anyone please advise on this lack of performance.
Thanks in advance
Bagpuss

One other thing that I've seen is that if your Oracle data source and Essbase server are in different geographic locations, you can get some delay when it retrieves data over the WAN. I guess there is some handshaking going on when passing the data from Oracle to Essbase (either by record or groups of records) that is slowed WAY down over the WAN.
Our solution to this was remove teh query out of the load rule, run it via SQL+ on a command line at the geographic location where the Oracle database is, then ftp the resulting file to where the Essbase server is.
With upwards of 6 million records being retrieved, it took around 4 hours in the load rule, but running the query via command line took 10 minutes, then the ftp took less than 5.

Audio issue with A605, RE: Input/mic monitor

I recently purchased a Portege A605-200, with Realtek HD audio and Vista.
Trying to solve a problem that I've found, in my several days of research, seems quite common with Realtek. Simply, I cannot monitor my microphone input, realtime, through my headset or onboard speakers. I can record fine, I just can't hear my voice, as you would be able to in any studio recording environment. This is a feature I need desperately, due to conference call recordings I make, via Skype, and realtime backup recordings I must make to Mini Disk.
Many solutions I've seen on the net require a registry edit, but I've not found one that works for me. Not afraid of the registry, just can't find the right edit.
Things get bleaker as I quote a Realtek technician (level one?) who wrote after several emails back-and-forth: "I'm sorry. The Microphone A-A Path function had been removed from your system . This is TOSHIBA requirement . So, you can not hear the microphone sound immediately. Best regards, PC-Tech AT ."
And I'm wondering "What the heck is the 'A-A Path function'"? Hardware/wiring issue? Software? Something to do with preventing feedback due to the onboard mic and speakers? Registry edit solution? Vista issue (never happened with XP)? Heck if I know.
I'm at a total loss and quite weary. I'm considering buying a Cakewalk Roland UA-1G USB Audio Interface or some other audio interface to replace the onboard audio. What else can I do?
Would NEVER have bought this computer had I suspected it would be impossible to record and monitor the mic input, as I have been able to do with every other computer I've ever had. I'm just praying somebody can save me some grief and money and provide a solution or suggestion.
Thanks much for reading this.
Rick L.
PS Updated the bios and loaded up the latest drivers from Realtek and Vista SP2. No luck.

No, I am using my Roland VS 1680. I am inputting audio from this recording unit to final cut using firewire. I can see the volume meter reading the input signal and when I capture, I actually record it onto final cut. Playback after capture is fine.
The issue is that I am unable to preview my audio stream through the speakers. I have gone to preferences on the apple menu checked off my input as firewire and output as built in audio.
I have noticed in my LOG AND CAPTURE screen (clip settings) the PREVIEW box is dark and not allowing me to check this off. I am assuming this might be why I cant preview audio.

X230 audio issue, cannot record or hear audio intermittently.

We have 209 x230 laptops with windows 7 64bit. A good number of these laptops are having intermittment audio issue. You cannot hear anything or record anything. Sometime the system sound will work but other application such as the web browser will not work.
EDIT: All drivers are updated.

Hi there
Have you tried what is outlined in the link below?
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Wired Headset issue with recording

Hi, I've a blackberry 9300 running on os5. When I try to speak during a call or record with the wired headset, the audio is not heard by the other person n doesn't seems to get recorded. With a high volume of audio it gets recorded and it is very feeble to listen with full volume. The speaker of headset works well when I listen to mp3. Also the headset works well with other devices where it can record the sound with minimal effort.. I donno what's wrong with it. Kindly suggest any solution. Thanks & Regards, Bhavan

Please try to isolate the issue by using another headset. If the other headset works fine, that means the one that you're using may be faulty.
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

Audio issues with HDMI connection

I just bought a toshiba 40l5200u (40'' 1080p) and I'm having issues with connecting my macbook pro to it with a HDMI cable. The picture looks fine and everything, but the audio is horrible. The bass specifically sounds terrible, very gravelly if that makes sense. Dialogue is usually fine, but when something loud, for example, happens in during a movie the audio (bass mostly) gets very distorted, scratchy, and just a pain to listen to. The audio sounds perfectly fine when I play a DVD through a dvd player, so it the speakers on the tv don't seem to be the problem.
I was originally using a "Cable Matters Gold Plated Premium Mini DisplayPort | Thunderbolt to HDMI Male to Male Cable in White 10 ft" (here's the Amazon link: http://www.amazon.com/gp/product/B004CADYDO/ref=oh_details_o04_s01_i00?ie=UTF8&p sc=1). I thought the issue might be with the HDMI cable, so I recently bought a "PNY A-DM-HD-W01 Mini DisplayPort to HDMI Adapter" (here's the Amazon link: http://www.amazon.com/gp/product/B007B6YPAM/ref=oh_details_o00_s00_i00?ie=UTF8&p sc=1) and another HDMI cable, "BlueRigger High Speed HDMI cable with Ethernet, Supports 3D and Audio Return" (here's the Amazon link: http://www.amazon.com/gp/product/B003XM9774/ref=oh_details_o00_s00_i01?ie=UTF8&p sc=1) but that didn't fix the problem at all.
What I can deduce is that the problem isn't with the tv's speakers. Other than that though I have no idea. Any suggestions on what to do? I would be very appreciative. Thanks.

It sounds like a software problem. Try updating your Flash software and your audio drivers.

10g Reports issue with XML Data Source

Hi,
Has anybody ever encountered an issue with Oracle 10g report using an XML as the data source? What happens is, some of the values in the XML are printed to the wrong column.
One of the elements in our XML file is a complex type with 10 elements under it. The first 5 are picked up properly, but the last 6 are not. Elements #6 to #9 has a minimum occurence of 0. What happens is when element #6 is present, but #7 is, the value for element #7 is passed on to element #6.
The XSD and XSL files are both valid since the reports were working when we were still using 9i. There is no hidden logic in the report which might cause this issue to come up, i.e., the report just picks up the values from the XML and prints it to the appropriate columns.
Any help will be greatly appreciated.

XSD used
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified">
 
 <xs:element name="TradeDetail">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="TradeType"/>
 <xs:element ref="TradeID"/>
 <xs:element ref="TradeDate"/>
 <xs:element ref="FundID"/>
 <xs:element ref="FundName"/>
 <xs:element ref="DollarValue" minOccurs="0"/>
 <xs:element ref="UnitValue" minOccurs="0"/>
 <xs:element ref="PercentageValue" minOccurs="0"/>
 <xs:element ref="OriginalTradeID" minOccurs="0"/>
 <xs:element ref="CancellationFlag"/>
 </xs:sequence>
 </xs:complexType>
 </xs:element>
 <xs:element name="Instruction">
 <xs:complexType>
 <xs:sequence minOccurs="0">
 <xs:element ref="TradeDetail" maxOccurs="unbounded"/>
 </xs:sequence>
 </xs:complexType>
 </xs:element>
 
 <xs:element name="InterchangeHeader">
 <xs:complexType>
 <xs:sequence>
 <xs:element ref="Instruction"/>
 </xs:sequence>
 </xs:complexType>
 </xs:element>
 
 <xs:element name="FundID" type="xs:string"/>
 <xs:element name="TradeType" type="xs:string"/>
 <xs:element name="TradeID" type="xs:string"/>
 <xs:element name="TradeDate" type="xs:string"/>
 <xs:element name="FundName" type="xs:string"/>
 <xs:element name="DollarValue" type="xs:decimal"/>
 <xs:element name="UnitValue" type="xs:decimal"/>
 <xs:element name="PercentageValue" type="xs:decimal"/>
 <xs:element name="OriginalTradeID" type="xs:string"/>
 <xs:element name="CancellationFlag" type="xs:string"/>
</xs:schema>
XML used
<?xml version = '1.0' encoding = 'UTF-8'?>
<InterchangeHeader xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="TradeInstruction.xsd">
 <Instruction>
 <TradeDetail>
 <TradeType>Purchase</TradeType>
 <TradeID>M000038290</TradeID>
 <TradeDate>20061201</TradeDate>
 <FundID>ARO0011AU</FundID>
 <FundName>ABN Fund</FundName>
 <DollarValue>2111.53</DollarValue>
 <CancellationFlag>N</CancellationFlag>
 </TradeDetail>
 <TradeDetail>
 <TradeType>Redemption</TradeType>
 <TradeID>M000038292</TradeID>
 <TradeDate>20061201</TradeDate>
 <FundID>ARO0011AU</FundID>
 <FundName>AMRO Equity Fund</FundName>
 <UnitValue>104881.270200</UnitValue>
 <CancellationFlag>N</CancellationFlag>
 </TradeDetail>
 <TradeDetail>
 <TradeType>ISPurchase</TradeType>
 <TradeID>M000038312</TradeID>
 <TradeDate>20061201</TradeDate>
 <FundID>MLC0011AU</FundID>
 <FundName>Cash Fund</FundName>
 <OriginalTradeID>M000038311</OriginalTradeID>
 <CancellationFlag>N</CancellationFlag>
 </TradeDetail>
 </Instruction>
</InterchangeHeader>
XSLT used
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
 <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
 <xsl:template match="/">
 <InterchangeHeader>
 <xsl:for-each select="InterchangeHeader/Instruction/TradeDetail">
 <xsl:sort select="FundName"/>
 <xsl:sort select="TradeDate"/>
 <TradeDetail>
 <TradeType><xsl:value-of select="TradeType"/></TradeType>
 <TradeID><xsl:value-of select="TradeID"/></TradeID>
 <TradeDate><xsl:value-of select="TradeDate"/></TradeDate>
 <FundID><xsl:value-of select="FundID"/></FundID>
 <FundName><xsl:value-of select="FundName"/></FundName>
 <DollarValue><xsl:value-of select="DollarValue"/></DollarValue>
 <UnitValue><xsl:value-of select="UnitValue"/></UnitValue>
 <PercentageValue><xsl:value-of select="PercentageValue"/></PercentageValue>
 <OriginalTradeID><xsl:value-of select="OriginalTradeID"/></OriginalTradeID>
 <CancellationFlag><xsl:value-of select="CancellationFlag"/></CancellationFlag>
 </TradeDetail>
 </xsl:for-each>
 </InterchangeHeader>
 </xsl:template>
</xsl:stylesheet>

Audio Issues with MacBook Pro (Late 2008)

I am seeing an occasional issue with my MacBook Pro (Late 2008). The Audio will go out... and instead you will just hear static-like clicking sounds when and audio even happens. For example... when you have the up/down volume notification on... and you change the audio volume.. you hear clicks. Or... when you open up a file that has audio.. you will hear the static-like click when the audio starts to try to play.
The work around per-se is to completely shutdown and turn the notebook back on. A simple restart does not seem to fix it... it looks like the system needs to have a bit of energy drain first. Which... worries me that this is a hardware issue and not a driver issue.
Wondering how many others are seeing this???

I went to and Apple Support Center last week and I asked some questions about audio because my MBP was having troubles too. The tech told me audio issues are very frequent on these machines and sometimes you have to change a part of the soundcard. He also added you have to bring the MBP to a support center if you're having the problem several times - in my case I'm waiting the next "crash" since I had only 2 issues so far... If you're under warranty go for a check up and see if it really needs assistance. Goodbye

Audio issues with Recording analog source

Similar Messages

Maybe you are looking for