Audio jack is not working

I have bought a blackberry z10 4 days ago.When I test the headset on another phone it is working fine
But when I put it into my phone it doesn't respond.i have followed many ways
..pls guys any suggestions......I want my z10 to be perfect......pls help
Solved!
Go to Solution.

Well, your phone is still under warranty. I suggest you take it back and either have it fixed or have it replaced.

Similar Messages

Front panel audio jack is not working on K9N Neo V2

My front panel audio jack is not working on K9N Neo V2. I check the JAUD1 cable and it appears to be connected to the front panel audio jack. My soundcard driver cannot detect any gadgets when I plug it in the front panel. My audio drivers and BIOS are up to date. Is there any known solution to this? My computer is only a few months old and I have not tried the front audio jack until recently. I'm on Vista home premium btw.
Also, I've got another problem, my processor is AMD 64x2 4400+ overclocked to 2.63Ghz. I've been using that clock value ever since I built this computer and stress tested the processor and found that it would not cause any problems like hanging or overheating. However, I recently decided the need for AMD's Cool & Quiet technology and enabled it. It caused BSODs every few days or per week that didn't happen before. I tried it with the default clock value and it still causes BSODs. Can someone help me?

Quote
Thanks. Its ironic that disabling it actually enables it.
It has to day with the front panel audio wiring of your case. How many wires are there that can be connected to the board's pin header?
Quote
Sound quality isn't very good
Can you be more descriptive? Is the quality better if you plug the headphone into one of the jack at the back panel? (Also, make sure you tell the Realtek HD Audio Manager, that a headphone is connected (and not regular speakers).

Speaker and audio jack is not working

My laptop speaker and headphone jack is not working.So am not able listen anything on laptop.Please give me a solution on it.

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion g series Notebook and issues with the sound. Here is a link to help troubleshoot issues with the sound. Please note remove any and all USB devices. Disconnect all non-essential devices and headphones, as these could cause some issues. Here is an automated tool for troubleshooting Windows 7. It has a built in Audio repair built into it. I hope this helps with the sound. Thanks.

Microphone speaker and audio jack is not working?

hi i buy a I phone 5 S in march from E max UAE . Its been 3 month only but my phone audio jackpot is not working ,microphone and speaker is not working moreover if i open some app for longer time and during charging it get hot. I took the phone to the store tell them the problem and the phone is in warranty also but they didn't change the device they say we cant change and just repair the device. its been two days my phone is back again i am facing the same problem .can anybody suggest me where should i go for complain and what i will do to change the device.

I've asked the hosts to relocate your post to the iPhone forum -> Using iPhone - this is the MacBook Pro forum.
Good luck,
Clinton

Audio jack does not work after 10.9.1 update

Hi folks --
I have had an issue for a while now that maybe some of you have seen.
I have a 2011 iMac 27, and upgraded to Mavericks months ago, no issues. For the holidays I bought an AppeTV 3rd gen for the wife, and after setting it up on the network, I can no longer play audio throught the audio out jack on the iMac to powered speakers.
Now, the issue is, I cannot tell if it stopped working before the AppleTV got added to the mix, or after a Mavericks update. It has been about 3 months...
The machine is out of warranty, and I have the sneaking suspicion that the audio jack on the motherboard is to blame... but not certian. Has anybody had that issue or seen it be an issue? I consider myself pretty up to date on the Mac support sites like Macintouch and iFixtit, but have not seen anything regrading this issue on this model.
I have done a deep clean with Onyx, zapped the PRAM, and done a few restarts. No joy.
Anyone have any wisdom to impart?
Thanks in advance
Michael

Raymond Rogoway wrote:
Used Software Update to update to 10.5.1. Now my install disk will not boot. Drive kicks out disk after awhile. Ran Disk Warrior which reported no changes. Repair permissions.
Ray
Does the disk also get ejected when you are running Leopard, or only when using it for booting?
Have you looked at it physically for scratches or that dirty film some DVDs had?

Audio jack port not working

i installed windows 8.1 on my laptop HP 655 and i have high definition audio device drivers installed but i cant hear any sound from my headphone or external speakers when i plug the audio jack in its port. but the internal speakers are working well... please help

Dear gbonyo -
I understand that after installing Windows 8.1, your speakers and headphones do not work. Well, that's annoying... I will try to help.
- Before going through these steps, make sure that the speakers and headphones are connected to the correct ports. (I know this sounds silly, but sometimes it happens.)
The first and simplest thing to try is the audio playback troubleshooting tool:
1. With the headphones and speaker plugged in to the laptop, type "troubleshooting" at the Start screen to open the Search charm, and then select Troubleshooting from the search results.
2. Under Hardware and Sound, click Troubleshoot audio playback and then click Next when the Playing Audio window opens.
3. A new window opens. Select the device you would like to troubleshoot. Then click Next and follow the on-screen instructions.
4. If a recommended action displays, select Apply this fix or Skip this step to continue to search for other problems.
If the above does not resolve the problem (and/or it does not find your speakers/headphones) it could be that the laptop does not know that it has speakers/headphones attached to it.
1. From the Start screen, type "sound" to open the Search charm, and then select sound from the search results.
2. Click on the Playback tab.
3. Right-click an empty area of the Sound window.
4. Click the check boxes to select Show Disabled Devices and Show Disconnected Devices.
If the device is listed as "Currently unavailable" or "Not plugged in," disconnect it, and
then reconnect it from the port.
5. Test the device by sending a signal from the sound source (For example: Play an mp3 file).
6. Look at the bars next to the device name on the Playback tab:
If the gray bars next to the line-in audio device name change to green, the device is active and an audio signal is passing through the line-in port. The issue should now be resolved.
If the bars remain gray and inactive, the computer is not recognizing a signal. Leave the Playback tab open and proceed to the next step.
7. From the Playback tab of the sound window click the port that you want to use (there could be one or more ports).
8. If the device you want to use contains a small circle with an arrow pointing down, the device is disabled. To enable the device, right-click the device name and select Enable.
9. Click Set Default to make this device the default line-in audio device.
10. Click OK to make the changes.
Please let me know if this resolves the problem. If it doesn't, we can try a couple of other things.
Sincerely,
dhtp
DH
I work on behalf of HP.
Please click "KUDOS Thumbs Up" if I have helped you, and click "Accept as Solution" if your problem is solved. Thanks for the feedback!

The right chanel in the audio jack is not working in my iphone4.

Does anyone have an idea what can it be?

yeep, tryed that already.and the headphons are fine.don't know what the **** can it be..

The second Earphone jack will not work. My DV6000 is only one month old.

The second Earphone jack will not work, but I get static when I plug my earphones into it. The other jack works ok. I need help in fixing it. My DV6000 is only one month old.
This question was solved.
View Solution.

HI,
Robert96 wrote:
The second Earphone jack will not work, but I get static when I plug my earphones into it. The other jack works ok. I need help in fixing it. My DV6000 is only one month old.
One of the jacks is for audio in and the other is for audio out. Some select versions have an S/PD/F jack. Chances are the reason you are getting static is that if you plug an earphone into a microphone jack it will attempt to behave as a microphone. It will not operate properly.
So..a recap. There is only one earphone jack
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Audio output will not work on external speakers. Internal speakers will work. What do i do to replace audio output slot

audio output will not work on external speakers. Internal speakers will work. What do i do to replace audio output slot

Right click your volume icon in the notification area and select "volume control options". From there, you should be able to select the external speakers.
I hope that helps!
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Audio captcha is not working in mac safari 5.1.7. We used below code snippet that is working in other browser like IF 7,8,9, crome and firefox. Audio refresh is also not happening. When submit Audio Captcha then jcapcha framework giving InvocationTargetEx

Audio captcha is not working in mac safari 5.1.7.
We used a code snippet that is working in other browser like IF 7,8,9, crome and firefox.
Audio refresh is also not happening.
When submit Audio Captcha then jcapcha framework giving InvocationTargetException.
<Edited By Host>

Audio captcha is not working in mac safari 5.1.7.
We used a code snippet that is working in other browser like IF 7,8,9, crome and firefox.
Audio refresh is also not happening.
When submit Audio Captcha then jcapcha framework giving InvocationTargetException.
<Edited By Host>

Audio Service is not Working.

HI everybody,
So today i just turned my pc on after a few days and noticed that there was RED CROSS "X" on my volume icon. It says that Audio Service is not working. i opened services(service.msc) searched for it and when i tried to start
it gives me this ERROR! I searched for solutions over the net as well as here. Recommendations that i found were
>Reinstall the drivers
>Unisntall drivers from Device Manager and then reinstall. (WHEN I TREID TO INSTALL DRIVERS IT GAVE ME ERROR THAT "AUDIO SERICE IS NOT RUNNING AND COULDNT BE STARTED" )
>Run "RPC" service and "Endpoint service". Currently both are running !
Last but not least, u must be thinking that why i posted such a big post, this is because others problems were solved and issue was also a bit different. :D
(I tried to post two images but the site said that u are not allowed to post images and links!)
Thank you all in advance, and please help me quick to solve this problem. I cant play games without sound for long ! :"(

Hi
Are you installing new drivers downloaded from the manufacturer website or letting windows install it for you?
Try disabling the sound card in the bios, reboot and then enable it again, reboot and see what windows does.
Can you also run a sfc scan and see if there are any corrupted files?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

TS3406 magic jack is not working properly. I can call out and hear the person i have called, but they can't hear me.

My Magic Jack is not working properly. I can make a call and the person I have called can hear me but I can't hear them. What can I do to fix this?

if it play not sound at all then it's likely the hardware issue where the headset detector gets stuck
like this the detector just is stuck in the opposite way
https://discussions.apple.com/thread/1343532?start=315&tstart=0
more
iphone stuck in headphone mode

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

bunjamin wrote:
There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
Hi bunjamin,
just go to BlackBerry World, and update all your apps including BBM.
bunjamin wrote:
Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
you can turn off the magnifying glass :
device settings >> accessibility >> magnify mode >> OFF
you can deactivate the "reset to Hub view" :
hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
bunjamin wrote:
my ringtone is much softer than it was previously
yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

IPad audio output is not working properly, except on Siri. Any ideas on what is wrong and how to fix it?

iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help. The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't. Any ideas on what is wrong with it and how to fix it?
my iPad is a 3rd gen, 16GB wifi only model, if that helps
I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!

Godly19 wrote:
iPad audio output does not work, except for on Siri. The mute button is not on, and the volume buttons have no effect/ don't work (unless Siri is open). I have reset the iPad, tried iOS7 and iOS8 resets, which didn't help.
iOS 8 isn't even out yet. If you are running iOS 8, I assume you are a developer and if you are, you are in the wrong forum to try to get help. If you are not a developer and you're running iOS 8, maybe that's why you are having problems on the iPad.
The audio output mostly works when headphones are out in, but has a tendency to cut out from time to time. Without headphones, Audio might start working again briefly from time to time, but most the time it doesn't. Any ideas on what is wrong with it and how to fix it?
The type that I made bold doesn't make sense. Is this a typo and you mean that " headphones are not in"?
I did take it to an Apple Store, but the inncorrectly insisted that my speaker was bust and it would cost £250 to replace the whole iPad!
And you know they are incorrect because you get sound here and there from time to time? That fact doesn't prove that something isn't working correctly inside. You could very well have a bad connection inside the device causing this, but somehow you seem to know that's not the case.

Multicam source sequence - audio offset does not work when syncing via audio

Working double sound with Canon 5D footage and syncing via audio is a big help, but the camera sound is one frame ahead of the video.
Merge clips requires each v/a clip pair be selected individually AND can't be slipped after merging - so that's no good.
Create multi-cam source sequence works a treat AND offers an audio offset BUT that does not appear to work when syncing via audio (I understand why you might think we wouldn't need it but...)
Unlesss I'm missing something?

I have the same problem. Syncing video via audio in multicam works perfectly on my 3 cam shoot but audio offset does not work. Had to do that on the sequence timeline afterwards.

Audio jack is not working

Similar Messages

Maybe you are looking for