Audio Jack Isn't Outputing Any Sound.. What's a fix?

how can i fix this...
when i go to setting, i can flip the connection and make it an input rather than an output. it will pick up my iPhone through an aux cable, while playing music.. but it won't out put any sound when in output mode... i've hade this mac for little over a year.. this issue occord a few weeks ago.. im a dj, i need this to work,,, help me
<Email Edited By Host>

I have and use a JVC CD Portable Boombox with the feature your looking for.
Model: JVC CD Portable System RD-HA 3
i am not sure if this model still be build, as there is a falow model?
I use an Airport Express and connected to these JVC CD Portable System RD-HA 3,
for receiving my music streaming from y iPad/iPod or computer.
when the playlist is ended, the JVC CD Portable System RD-HA 3 will automatical shut down after a few minutes. Or it will start also automatcal when there is again audio sound detected.
(This presset can be turn off via the remote control)
maybe you should ask one a JVC receiler what kind of other JVC audio product have this also build in?

Similar Messages

Audio jack from laptop outputting louder sound on the Right

My laptop which is an HP ENVY 15 Notebook PC with Windows 8.1has been outputting louder sound from the audio jack louder on the right earpud/headphone side than the left (or the left side is softer than the right). The sound outputs normally from the build in speakers though.
The speaker properties on it has both sides balanced on the volume output. I have tried resetting the BIOS and deleting the sound card drivers from Device Manager in the Control Panel. Also I've tried deleting the driver, redownload a new one, turning off the laptop, take out the battery and drain the power, then start pressing Esc...F10...F5...and so on steps (for the people that will tell me to do this).
Is there any other solution (besides resetting the laptop completely)?

Hello @danielmc4102 ,
Welcome to the HP Forums!
It is an excellent place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I see that when you connect your headphones that the audio is unbalanced, but when you are using the internal speakers it is fine.
When you connect your headphones have you gone into hardware and sound and configured the headset?
Here is a link to HP PCs - Resolving headphones and headset problems (Windows 8).
Have you tried different headsets or this headset in another computer and is the issue the same?
You can contact HP support at any time for further assistance. They can remotely access your system to aid in overcoming difficulties.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

My phone no longer outputs any sound via it's speakers

iPhone 4S, iOS 6.1.3
My phone no longer outputs any sound via it's speakers. I can hear sound with headphones and also if it is connected by the dock connector it will output sound to whatever it is connected to.
I have tried plugging and unplugging headphones several times thinking that it is stuck in headphone mode but that did not resolve the problem. I tried a factory reset in case it was software related but that didn't fix it either. The phone is out of warranty.
Thanks.

Bring your phone to Apple for out of warranty replacement. In the US this will cost $199.

I have imported videos to my lap top (Windows Vista), from my new ipad. Quick time plays them with audio, however the screen is black. What is the fix?

I have imported videos to my lap top (Windows Vista), from my new ipad. QuickT
ime plays them with audio, however the screen is black. What is the fix?

Experimental advice (in this particular context) coming up.
Open your QuickTime control panel (either via the Control panels, or by going "Edit > Preferences > QuickTime Preferences" in the Quicktime Player). In the Advanced tab, uncheck Enable Direct3D video acceleration:
... and click OK. Quit and restart the QuickTime Player prior to checking to see if the settings change has had any effect.

Do you have any idea, what makes to fix this error in creating PO.

The error is u201CDocument 101600 does not existu201D
Do you have any idea, what makes to fix this error in creating PO.The error is u201CDocument 101600 does not existu201D Here the 101600 is PO no.

Hi
Please check in t.code: RZ20 .
You can find out the nature of this error
Regards
G.Ganesh Kumar

Isn't there any sound output on HP w2558hc??

I can't find out how to get any sound OUT (for headset) of my screen...is it just me beeing silly or isn't there plugin pls help

Your HP W2558hc LCD Monitor DOES have integrated speakers. To get external sound working, you do have to connect
the sound cable from the back of the monitor to the sound output port on the back
of the computer tower. The speaker wire should have a light green colored, male, single pole mini RCA
plug which you would match with a light green colored female sound jack on the back of the tower.
In order to get sound through your headphones, you should locate the jack on the front of the computer
with the headphone symbol beside it and plug the headphone into it.
"While I am an HP employee, I am not a expert on all our products.
If I offer advice, I'm not speaking for HP on how to solve an issue,
but I'll do my personal best to help you."
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.

[SOLVED] MPD isn't making any sound while running as its own user

I can't make MPD produce any sound when it runs as its own user.
- I'm running MPD from systemctl
- If I run MPD as my own user I get sound
- I am not using pulseaudio
- mpv, for example, plays sound fine
- speaker-test -c 2 -D hw:1 plays sound fine
- journalctl -u mpd gives errors of the following type:
Jul 26 15:08:25 alexei-desktop mpd[5951]: alsa_output: Failed to open "My ALSA Device" [alsa]: Failed to open ALSA device "default": No such file or directory
Jul 26 15:08:25 alexei-desktop mpd[5951]: output: Failed to open audio output
Jul 26 15:08:25 alexei-desktop mpd[5951]: player: problems opening audio device while playing "deep_medi/releases_volume_one/01-Kalawanji.flac"
/etc/mpd.conf for sound outputs:
audio_output {
type "alsa"
name "My ALSA Device"
# device "plughw:1" # optional
# format "44100:16:2" # optional
# mixer_type "hardware" # optional
# mixer_device "default" # optional
# mixer_control "PCM" # optional
# mixer_index "0" # optional
My ~/.asoundrc looks like this:
pcm.!default {
type plug
slave.pcm "dmixer"
pcm.dmixer {
type dmix
ipc_key 1024
slave {
pcm "hw:0,0"
period_time 0
period_size 1024
buffer_size 4096
rate 44100
bindings {
0 0
1 1
ctl.dmixer {
type hw
card 0
> groups mpd
audio mpd
> aplay -l
**** List of PLAYBACK Hardware Devices ****
card 1: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
Last edited by PlasmaSheep (2014-08-02 03:45:07)

Sure, sounds good.
> aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: CODEC [USB Audio CODEC], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 1: ALC888 Digital [ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
> lsmod | grep snd
snd_hda_codec_realtek 54803 1
snd_hda_codec_generic 56366 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 40396 1
snd_usb_audio 131860 2
snd_usbmidi_lib 21428 1 snd_usb_audio
snd_rawmidi 20278 1 snd_usbmidi_lib
snd_hda_intel 22831 2
snd_seq_device 5244 1 snd_rawmidi
snd_hda_controller 22911 1 snd_hda_intel
snd_hda_codec 104665 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep 6652 2 snd_usb_audio,snd_hda_codec
snd_pcm 83207 6 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_timer 19294 2 snd_pcm
snd 61276 18 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
soundcore 5551 2 snd,snd_hda_codec
usbcore 188381 7 snd_usb_audio,ohci_hcd,ohci_pci,snd_usbmidi_lib,ehci_hcd,ehci_pci,usbhid
> cat /etc/modprobe.d/alsa-base.conf
options snd slots=snd_usbaudio,snd_hda_intel
options snd_hda_intel index=0
options snd_hda_usbaudio index=1
I'm not exactly sure what to put in ~/.asoundrc, however...

Audio jack won't detect any earphone after soaking wet on saltwater/sea

Hi!
I'm a Sony Xperia Z2 user from the Philippines. Just last week,I spent my time on a paradise. Doing island hopping for 3 straight days and that means,my Z2 is continously soaking wet in salt water for 3 days,capturing pictures and videos of corals and other life underwater. I was not having any problem at all! Amazing device I have!
And then the 4th day came. All was well,phone's working normally. But upon looking the audio jack,the walls inside it is covered by 'GREEN' particles. I was told to follow-up running tap water on it,so I did. Nothing happened. Again running lukewarm water on it then cleaned it with cottonbuds.But still,nothing. There's a part of the jack unreachable by cottonbuds,thus,leaving little green particles on it.
I was told by a friend that there's an xperia forum discussing the same fate as mine and got theirs back to normal again. I'm not sure if this is the same forum he was talking about. But anyhow,I want to hear from you if you had heard already the same problem as mine and know the solution to it. I'd be in luck if somebody can link me a thread similar to this.
Thank you in advance for responding.

@julfinch
I'm sorry to hear this, contact your local Xperia Care and request a vacuum test
http://support.sonymobile.com/global-en/contactUs/
keep in mind that although the phone it's waterproof, sea water will destroy your phone.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Audio Jack Makes fuzzy static popping sounds

So whenever I watch youtube/netflix, i plug in my earphones in the audio jack. I've realized whenever im watching netflix or listening to music, there's a fuzzy popping type sound. Its not the earphones because ive used different ones. Can somebody help me please!?

Hello @magicmikeeeeeew,
I have read your post on how your headphones make a fuzzy / popping sound when watching netflix and youtube on your notebook, and I would be happy to help you!
For further assistance, I will need to know:
If the same sound can be heard from your notebook's speakers.
If the same sound can be heard from playing a video or music file from Windows Media Player.
The Product and Model Number of your notebook computer.
The version of Windows you have installed on your computer.
If your computer has completed all of its important Windows Updates.
If you have updated your HP drivers using the HP Support Assistant.
If this is an on-going, or recent issue.
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

My phone thinks the headphones are plugged in and I can't get any sounds. How to fix?

My iphone 5 thinks that the headphones are plugged in and they are not. I used them earlier today but they are no longer plugged in to the phone. I can't get any sound (text alerts, ringing, etc) on the phone outside headphones. Any ideas on how to fix?

I have resolved my own problem thanks to reviewing other discussions. The solution that worked for me and that was suggested by an Apple store associate some time ago was to plug and unplug my headphone jack into the iPad four times. On the fourth time leave the headphone jack connected and rotate the plug clockwise, then remove and try your sound. When you use the external volume control the HEADPHONE label should be gone. It appears I have to do this now every time after I've used my headphone jack.

Why isn't my audio jack microphone not showing in sounds and output on my macbook air...?

hi guys i have recently bought a speedlink spes clip on microphone i plugged it into the 3.5mm jack on the side of my macbook air then i went into system preferences and clicked on sound. then output... but there wasn't anything showing where as if it was showing i would have been able to select my microphone output and not the actually macbook mic. but my new device plugged in isn't showing and i can't use it. i checked the packaging and it says system requirements mac. so I'm good with that because i have one. i am really confused why it isn't showing. i need help please guys. ill be so great full

just done it. still no sign of it

No audio or any sound what so ever

Hello. Recently i upgraded from Windows XP to windows Vista Home Premium. My sound has stopped working since. I teamed up with a Microsoft professional and he said to go see if there is a new driver i can download for this type of problem. My System Model is PY195AV-ABA a1110y
. If you can, please me a link for the latest driver to the lastest BIOS and the sound card. My microsoft support helper has told me that he will work closely with HP. Please help and thank you. If any HP staff would like to contact me privatly through e-mail please let me know

BIOS:
ftp://ftp.hp.com/pub/softlib/software7/COL15074/pv-40292-1/sp26760.exe
Your motherboard has Realtek onboard audio, however this is a CTO machine which could have an addon sound card.If you think you are using the onboard or just aren't sure...try the Realtek driver:
ftp://66.104.77.130/pc/audio/Vista_R214.exe
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

New iPad 2 isn't producing any sounds?

Received replacement iPad 3 weeks ago and I haven't had problems until today. Sound is not functionally properly. Sound will not work without headphones. Mute is not on and volume is turned up. Any advice?

I don't fully understand what the System Reset does but I've found that it cures many ills. It's easy, quick and harmless:
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears.
A System Reset does not remove any apps, music, movies, etc. nor does it cause any settings to revert back to default.
Also, you might wish to download the iPad-2 User Guide. Pay special attention to page 162. Note that this Guide also applies to the iPad-1 with IOS 4.3 except for those functions that are not supported by the hardware.
http://support.apple.com/manuals/#ipad
Finally, the User Guide can be downloaded at no charge via iBooks and a less comprehensive version of the Guide is included as a Safari bookmark.

I installed bootcamp 5 for my late 2012 iMac 21" and installed the latest version of windows 8, however when i boot with windows i dont get any sound, what can i do to fix this?

I'm trying to playa game called day z (not sure if many are familiar) through boot camp 5 and the newest version of windows 8 it's pretty much a must to hear everything going on around me and I can't exactly do that when the sound drivers aren't working. I've updated all of my software and still nothing is working. If anyone has a link to the newest windows 8 sound drivers it'd be greatly appreciated. Or if you have any other solutions it would be greatly appreciated!

I'd recommend reposting in the Boot Camp forum, with a few exceptions most people on this forum only speak OS X. That forum can be found at:
https://discussions.apple.com/community/windows_software/boot_camp

My iPod isn't transmitting any sound

So I picked up my iPod, and it got snagged on another powercord, it fell on the padded leather recliner, no biggie. So I picked it up, popped in my headphones, and hit play... no audio. So I pulled them off, and noticed that altough it may be annoying, there was no clicking noise coming out of the tiny speaker. So, I tried resetting it, checked my notes section, looked through all of my music, plugged it into my comp to see if it worked, and everything seems fine. I even found my old stock headphones and tried it, but still no audio. Any help? I'm trying to avoid a complete restore if possible.

See this thread for answers to your question:
http://discussions.apple.com/thread.jspa?threadID=397433&tstart=0

Audio Jack Isn't Outputing Any Sound.. What's a fix?

Similar Messages

Maybe you are looking for