Audio Jack not working on iPhone 6 plus

I  have had my Iphone for about 4 days now and just the other day I found out that my audio jack does not work. I plugged my headphones in and instead of the music playing through the headphones it just continues to play through my speakers. I have tried several different headphones and I have even tried plugging an AUX cord into it while I was in my car and still nothing. Has anyone else encountered this same issue and if so have you found a way to fix it? Or is this something that I need to fix by taking it to my local apple store?

Given that it is practically out of the box, you should take it in and make it Apple's problem. They should fix it, replace it or refund you for a new one that works.

Similar Messages

  • P6N Diamond X-Fi Xtreme, back audio jack not working after windows reinstall

    Hi everyone,
    I've been having a problem with audio since reinstalling windows. Previously under windows xp sp3 i had no issues but after the most recent reinstall of windows xp, the rear jacks for the audio aren't working despite the front headphones jack working perfectly fine. Since this was only a short term measure, i didn't bother trying to sort it out until now, when I've now installed windows 7 on the computer and the issue still exists.
    I'm using the latest driver available on the msi website http://www.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=1168 and I have also tried using the audio driver patch available on the same page.
    The fact that there were no problems before a recent windows reinstall and that the issue is mentioned on the driver download page makes me think the problem is with the drivers and not with the hardware.
    I searched through the forums and while a fair few people seem to be having the same issue or similar issues with audio jacks not functioning properly, i couldn't find a relevant solution for me.
    Cheers,
    Dave

    Yep that sounds exactly like my problem. The issue lies with the on board soundcard and their vista drivers. Creatives' vista drivers are notoriously bad. This coupled with the fact their drivers won't even INSTALL on a p6n board because their drivers do not detect the onboard soundcard adds to the problem. As far as I see it there are two ways to solve this issue:
    1.) Buy a front audio panel addition to your case.
    I am not sure on your setup but here is one with HD audio support: http://www.newegg.com/Product/Product.asp?Item=N82E16813999356
    And that will fix your back panel port, and give you the option to use the front as well.
    2.) Buy a new soundcard.
    This is what I did after learning that the onboard x-fi isn't even a real x-fi card. I opted to buy the X-Fi gamer (cheapest of the X-Fi cards) and so far the drivers have been acceptable in vista. My non-hd front ports work, as well as my back port.
    Another alternative would be to wait for MSI to release an update to the creative drivers that they provide. No guarantee on that though.

  • P965 Neo-F audio jacks not working.

    I've been having serious issues with the audio jacks on the P965 Neo-F board.  I have actually tried two boards, convinced the first board was defective since my speakers worked fine on other computers.  On both the current board and the last board, I did a complete clean XP install, formatting my hard drives and installing the latest RealTek HD drivers (5.10.0.5404 dated 4/23/2007, from MSI).  The first board never so much as peeped, while the board I have now has made some sounds, although I honestly don't know why.  On this board, I had a set of Altic Lansing 2.1 speakers, but because the speakers would pop and make static noises every now and again, generally only if I bumped one of the small stereo speakers or wiggled the cords on the back of it, I thought perhaps the problem was the speakers being old.
    On the current board, I tested a monitor that has speakers in it, and there was no sound.  RealTek's sound manager, which I have installed, did not recognize that there was anything plugged into the jacks even though I had a line in, microphone, and line out plugged in.  When it did recognize the lino out, it also recognized the microphone.  However, it only recognized them for no more than a minute.  The new speakers (also Altec Lansing 2.1) made one squeak for less than a second; other than that, there has been no sound at all.
    I've tried several different RealTek HD drivers from MSI, Microsoft, and RealTek, but none have made any difference.  I've enabled and disabled only to re-enable the audio device through BIOS with no success.  I've checked the volume, DxDiag, and played music--Winamp and iTunes are both making sound, but no sound is coming out.
    I'm pretty much out of ideas here.  The only thing I can think to do is get a sound card, but I don't see why I should have to do that when I'm not an audiophile and the board jacks should suit me fine.  I am quite at my wit's end with this, and would appreciate any help I can get.

    Quote
    It recognizes that I pluged something into the microphone jack but can't get the microne to work.
    This problem usually has to do with the fact that the computer case used, or to be more precise: its front panel audio connectors are not fully Intel HD Audio compliant.  Disable the Automatic Front Panel Jack Detection Function in the Realtek HD Audio Manager and retry.
    If your mic still does not work as it should, browse through the Realtek Program Folder and look for an executeable file named "miccal.exe".  Run it to calibrate your microphone.  Also, enable "Microphone boost" in the Mixer-tab of the Realtek configuration program. The top half part of the mixer Tab ("Playback") can be scrolled to the left via <> buttons.  Scroll left and localize the input jack your mic is plugged into (example:  "Rear Pink In").  Click on the Options button and enable microphone boost.
    Quote
    When I go into the mixer settings I can't adjust adjust any of the inputs - cd, mic, line etc. Although it shows places for a sliding volume adjusters but doesn't show a slider to be able to adjust the volumes of the inputs.
    That is totally normal and not a problem.  It is basically a limitation of the Realtek HD Audio Driver in combination with Windows XP.  It has nothing to do with the board.  Here is an Asus-example:
    There is nothing wrong here.  If you scroll through that output devices/jacks in the Mixer tab of the Realtek HD Audio Manager, you will find that you can adjust the input/output volume for each audio jack individually.  Doesn't make sense to adjust input volume in the output section?  Well, ask Realtek which genius designed the interface and ask him personally.   

  • Msi p35 neo Front Audio Jacks Not Working

    i have msi p35 mainboard and EZcool case in the front i have 2 usb,mic in and headphones jacks
    the usb jacks are working and but mic and headphone jacks doesn't work
    I instulled the driver and it Show me the jacks but the steel doesn't work
    What should I do?
    plz help me
    now you can see my promplem in video

    Deactivate the automatic front panel audio jack detection option in realtek hd audio manager.

  • HP HDX 18t Audio jacks not working

    Hello community,
    the audio jacks aren't working on my HDX 18t 1200. headphoens don't work and neither does connecting speakers. What can i do?
    Thank you,
    Thomas

    Download & Save the latest Audio driver.Go into Control Panel,Programs & Features- Uninstall IDT software.Shutdown the laptop. 
    1-remove power cord and battery
    2-press power button for 30 seconds
    3-reinstall only power cord for first startup.
    4-power on
    5-Try to install using the downloaded file.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • IOS 7 flip-up audio command not working on iPhone 5

    I updated to iOS7 on my iPhone 5. While many things seem to be working fine, I noticed that the music buttons (play, pause, FF, RW) on the newly-introduced flip-up menu do not work.  I need to go to turn on music (touch the red icon) and play/pause/FF/RW. Is it just me that is observing this?

    You must have Internet connection for Siri to work either Wi-Fi or cellular data.

  • Rear Audio Jack not Working on New Mac Pro

    Hello All,
    Here's the deal. I just pursuaded my company to buy a brand new Mac Pro to run FCP Studio 2 as a test run to see if they perform well enough to eventually replace our remaining PC's. We've had the Mac Pro for less then two weeks and I'm running into an issue that I can't resolve, and I don't want to fall on my face. The rear Audio input jack keeps failing. Meaning sometimes it works and sometimes it doesn't when speakers are plugged into. The jack on the front works fine, but the rear jack doesn't appear to recognize the speakers after the computer is shut down then restarted. You have to restart the computer 2 or 3 times before the speakers start pumping out sound. Which in all honesty is extermely dissappointing to me. And if I have to bring this thing in to get serviced, my boss will not move forward with buying anymore Mac Pro's, which I'm working hard to make happen.
    Please help me out.
    Thank you all for your time

    Try resetting the SMC: http://support.apple.com/kb/HT1806?viewlocale=en_US.
    Also try resetting the PRAM: http://support.apple.com/kb/HT1379.

  • Built In Audio jack not working for Guitar

    I'm using Garageband 6.0.2 with my new MacBook Pro.  I have a guitar plugged into my amp, and from my amp into the audio input jack on the MBP. I have the settings set to use the Built-In Input, but it doesn't pick up any sound from my guitar when I play; it's using the built-in microphone instead. (and yes, I'm using the Electric Guitar Track). All my cables are good, my amp is good, I've tried multiple different settings to make sure I'm not overlooking anything, and everything's fine until I try to get some sort of signal from the Built-In Input. It just insists on using the microphone.
    I've succesfully used Garageband plenty on my last MacBook Pro, but this one just doesn't seem to want to cooperate. Can anyone please help troubleshoot this?

    I am using GarageBand 5.1, but this should work with newer versions.
    I recently put together a simple Garageband electric guitar setup.  Here are the steps that I took to use the audio input jack.
    Required Materials:
    Guitar
    1/4" to 1/8" cable (Adapter acceptable)
    Macbook
    Headphones or External Speaker
    First, plug in the headphones or external speakers.  This will prevent any unwanted audio feedback, which could damage your macbook.
    Next, open system preferences and navigate to the Sound preference pane.  Command+Space "Sound" should get you there.
    1.)  Click the input tab and you should see two options: Internal Microphone and Line In.  Click Line In.
    2.)  Plug your guitar into the audio line in jack on your Macbook.  You should see the Input Level jump when you plug in your guitar.  Strum normally and adjust the input level.  I turned it all the way up for my acoustic-electric guitar, but if you have an electric guitar with good pickups, you may have to turn it down.
    3.)  Open GarageBand and select "New Project" subcategory "Electric Guitar".
    This is the extent of the information that I was able to aquire through Apple GarageBand documentation. Everything that follows is either third-party or trial and error. 
    4.)  Open GarageBand system preferences (Command+ , ).  Open the second tab labeled "Audio/MIDI".
    The first two settings are "Audio Output:" and "Audio Input:".
    Changing both of these options manually to "Built-In Output" and "Built-In Input" guarantees that you will be able to record and modify audio from your guitar and hear it live.  Clicking "Optimize for Minimum Delay" is useful if you want to hear your guitar with effects with minimum lag.
    I have experimented with changing these settings with limited success.  If you learn anything new please contact me on my profile.
    An Apple a Day...
    Doctah Wilson

  • Headphone and other audio jacks not working on msi GT 70

    I was wondering if anyone could tell me why the headphone jack isn't working properly on my new laptop.  When I plug them in it only works in one ear and the onboard speakers still play.  Also nothing pops up from realtek when I plug them in.  I have already tried uninstalling and reinstalling the newest version of realtek. 
    I have been having a heck of a time with the graphics cards.  It will not default to the Nvidia GTX 670MX when I am in a program such as adobe premiere pro or photoshop.  I went into Nvidia and changed the certain programs that I wanted to run the Nvidia card - still wont run off of it.  I changed the global setting to Nvidia - still nothing.  Finally I just disabled the intel driver in the device manager.  It works fine now except exported video is very glitchy on the players.  It plays the videos fine when I enable the intel driver again.
    I guess I can live with the graphics card problems, but can't live without the headphones working.  Any help is greatly appreciated
    Thanks

    be sure everybody has same problem https://forum-en.msi.com/index.php?topic=180629.0 or https://forum-en.msi.com/index.php?topic=180690.0 I found a way if you had new nvidia driver delete nvidia sound driver after delete your msi sound driver after reboot , install your msi sound driver it will be normal but if not try first msi driver after nvidia with beta or new sound driver if still not use realtek new drivers but dont forget delete nvidia sound driver , but you should always repeat it , msi couldnt fix this problem just offer to use old driver and old nvidia driver

  • Audio jack not working when cover closed and hdmi connected

    Pavillion Sleekbook 14 (14-b017cl)
    Windows 8
    I have an external monitor connected via the hdmi port.  My external monitor does not have built in speakers.  I connect an external speaker via the headphone jack.  I can play audio fine if the notebook cover is open.  As soon as I close the notebook cover, the audio stops.  How can I get the audio to still be sent to my external speakers with the cover closed?
    I have my power settings set to "Do Nothing" when lid is closed.  I don't know what else to try?
    Thanks for your help.

    What is the status of the TV when the lid is closed? Does the image remain as it should?
    Try installing this audio driver as it was released after the launch of Windows 8.
    What program is playing the audio? For example, a music player or movie program? Is there no audio in any program when this happens?
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • My Hp Laptop audio jack not working...!

    Hi Frendz,
    When ever i detach my head phones or ear phones in my laptop the audio got muted. I tried all my sound settings ...it working fine without head phones...but when i put header phones and i like to remove my head phones...the loptop got mute,....i am totally fedup ...kindly suggest any solution for the same....
    thax....!

    Hello Ashad,
    What is your product number and operating system?
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • AUDIO PROBLEMS when converting to youtube - When I export my file, parts of the audio are not working on ipads or iphones - any explanation for this?

    I am posting videos to youtube and for some reason different portions of my audio are not working both on iphone and ipads...  any thoughts on this would be appreciated

    Try using psd.  Some rerports indicate some confustion between the apps with TIFF.  See:
    https://discussions.apple.com/message/15921933#15921933
    I cannot confirm, nor test, since I use PS CS5, and not Elements.
    Ernie

  • Why docking cradle with headset jack for apple iphone 5s not working with iPhone 5s headset

    why docking cradle with headset jack for apple iphone 5s not working with iPhone 5s headset.

    don't know.  what have you done to troubleshoot?

  • Autofocus not working on iphone 6 plus, how do i fix it?

    autofocus not working on iphone 6 plus, how do i fix it?

    Since you bought it a "guy", you may be in for more unpleasant surprises.  Many of the iPhones sold through private parties are stolen, and can't be used.  Assuming that's not the case...you can make an appointment with an Apple genius, and have the IMEI and serial number checked.  The Genius can tell you what the original carrier was.  You can then check with the carrier about unlocking it.  If it is unlocked, you can use any GSM carrier.

  • Appletv remote app and airplay not working with iphone 4S

    I have the latest appleTV.  I have the remote app loaded onto my ipad3 and iphone 4S.  The app is not working with iphone 4S, nor do I get the airplay icon, hence I can't mirrior my phone on appleTV.  It used to work.  I have deleted and reloaded the app, and still nothing.  It worked fined until a month ago or so.  I have enabled home sharing.
    The app and airlplay are working just fine with the ipad3.  I have the ipad and appleTV hooked up to my router using 5Ghz, and the iphone only connects to the 2Ghz network on the same router.  I don't think this is the issue, because it worked before.
    Also, when I click on the remote app on the iphone, to add an itunes library, a code pops up on the phone, which I enter into itunes on my Win7 PC.  Nothing seems happed on the computer when I enter the code.  Could this have anything to do with recent appleTV or itunes updates?  Any possible solutions?

    It seems like I am having the same problem.
    I have the latest AppleTV 1080, imac 27", ipad, ipad2, 2 iphone 4, all with the latest iOS. After I have the AppleTV connected, a few problems showed up:
    (1) ipad plus iphones cannot airplay photo to AppleTV. After the play button and the grey screen displayed "the playing msg on AppleTV", nothing happened. it is the same for ipad/iphone.
    (2) iMac not Airplay to AppleTV
    (3) Airplay Mirroring not working
    The following are done:
    - Home sharing enabled
    - To test the devices are connected. I set a passowrd for Airplay and the ipad/iphone both requested for it so they are network and devices are ok

Maybe you are looking for

  • How can I send an email to multiple addresses for one recipient?

    I would like to send to recipient who has an "additional" email acccount, that is to both of his accounts.

  • Dynamic header based on the chosen Grid POV

    Hello, I have two grids Grid1 and Grid2. Both the grids have one editable POV and are different from each other. Either of the grids are being hidden based on a flag being input by the user. I need to display the dimension name and the member name of

  • Home video: sound but no image....?

    So I took a little 1 min. home video with my handheld digital video recorder, then I imported the video into iPhoto. Dragged the vid from iPhoto to iTunes "movies" in the Library. It's in there, no problem, able to view and listen in iTunes. I set th

  • Computer makes clunking sound after installing OS Lion

    Ever since I installed OS Lion, my iMac now makes a quiet regular clunking sound all the time in the background, as if it is processing something. ....Never noticed this before. Any ideas what this could be?

  • User and password fields vanish in login window

    Hi all I'm scratching my head. I have a managed 10.7 client, bound to a 10.7 OD, for various testing. Set login window to show user and password text fields. Sometimes (but not always, haven't found a rule yet), there is a little left/back arrow left