AUDIO JUMP AS PICTURE CHANGES

I have burned several dvd's using iDVD 5 and they all run fine on my dvd player and TV.
However I have done a couple for others and while they run perfectly well on my set up on three other dvd players and TV's the audio jumps every time the picture changes.
Has anyone any idea if there is something I can do to sort this problem.
IMAC G5 Mac OS X (10.4.5)

Sue,
Thanks for the info.
Once the 'Orange' team from about 80 miles to the East of me got knocked out of the NCAA's, the local media media lost all interest in college roundball. (It's the same during the football season.)
Fred
By the way, if you go to the webpage listed in my public profile you will find my .mac email address so we can carry out further discussions off the forum.

Similar Messages

Audio jumps in idvd slideshow

On my G4 pwrbk, I created an iDVD project with a movie from iMovie and added some photos from iPhoto to My Slideshow in iDvd. Its about 30 jpegs and I scored it to one audio track lasting about 3 minutes. I put transitions between the photos, and in preview, before I burn the disc, the slideshow is sharp. Seamless. Glorious.
After the disc is burned, I view it on a Dvd player and now there are audio glitches in the slideshow only, when the pictures change(the music pauses inbetween the picture transitions). Now all of a sudden, the slideshow is stunted and lurching! Never had this problem before, the movie itself plays without flaw.
Of course I imagined it a fluke and reburned it again. Repeat failure. Next I changed the audio track. After that I changed the transitions between photos. Now more desperate, I scratched the whole iDVD project and started over from iMOVIE and iPHOTO. After creating a whole new iDVD project it still does it. I am out of ideas and have 5 less blank DVDs.
Helplease.

as far as the 12/16 bit is concerned, i believe it is 12 bit
That could be your problem.
First reset the camera so all future filming is with 16 bit.
Look at http://docs.info.apple.com/article.html?artnum=61636
There is another workaround by taking the clips and doing extract audio from the advanced menu in iMovie.
http://docs.info.apple.com/article.html?artnum=42974

When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been. How do I do this without the document changing?

When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been. How do I do this without the document changing?
I need to be able to send it to a PC in order to print it.

Hard to say what is happening without examining the file.
If you like click on my blue name and email me both the .pages file and the the .pdf you have made from it.
Peter
ps It would help to say what version of Pages you are using and on what you are running it. iOS or Mac and what version.

How do I delay a picture change in Keynote beyond the 60seconds the build process allows from one graphic to another on the same slide?

How do I delay a picture change in Keynote beyond the 60 seconds allowed in the 'build' it procedure on the same slide?

BazzyS wrote:
I'm referring to a graphic change within the same slide not transition between slides.
In the suggestion I gave, using a transition instead of a build, has exactly the same visual effect as a build, it just uses a different tool.
in my example earlier, I have 7 coloured objects, the first 6 objects appear using a dissolve build.
The 8th object appears with the same effect, a dissolve, but is delayed by 5 minutes because it uses a dissolve transition.
I used a transition instead of a build which uses 2 slides to achieve the effect, the viewers will not care how many slides there are and what tool is used, its the end result that matters.
first 7 objects appear in a build
a transition set up using a disolve and a delay of 10 minutes
7th object appears with a disolve

My iSight is not recognized by my mac, even in the picture changing of my profile. Can anyone help?

My iSight is not recognized by my mac, even in the picture changing of my profile. Can anyone help?

http://discussions.apple.com/docs/DOC-6431

HT5517 I have enabled airplay from my ipad to my apple tv and I am only getting the audio and no picture?

I have enabled airplay from my ipad to my apple tv and I am only getting the audio and no picture?

I assume this is using an app.
Check the developer's website as many only support Audio Airplay.

Desktop Pictures: "Change Pictures" in System Prefs no longer works.

I used to have my Desktop pictures change every five minutes using a special folder of photos. This function no longer works. The setting appears to be in effect according to the System Preferences Desktop Pictures Pane but the function appears to be broken in 10.4.5. I have trashed the Destop Pictures Preferences file in the Preferences Folder, but it still will not work.
Can anyone using Tiger 10.4.5 get this to work?
Griff

OK, that was really dumb!
The reason for the problem became abundantly clear when I quit Pathfinder. Suddenly the picture change became functional again.
So, I guess Pathfinder will not follow the Finder when it comes to settings like this.
Hey Cocoatech, how about getting this into your next release?
Griff

DVR620KU DVD records audio but no picture

Hello, I have my dvr combo hooked up to both my LG TV and external device (roku box). I have all of the correct cords in place as far as I know, i have input 1 for the tv and 2 for roku box. But when attempting to record on DVD, it: 1. Shows blue screen on both input select options, and 2. Records audio but no picture. Any ideas where I may have gone wrong? Any help is much appreciated!

There may be some confusion about what is input and what is output for the DVR620.
Be very specific about how you have connected the DVR620. What is coming into L1 and L2? What is going out from HDMI, S-Video, video out, and/or component video out? What are the model numbers of the LG TV and the Roku?
If I'm interpreting what you're saying correctly, you're trying to connect your TV to L1 on the DVR620 and that's not going to work. L1 is an input signal to the DVR620, and the TV would also be expecting an input signal. The Roku could indeed be connected to L2 via composite video out from the Roku (assuming that model has that output).

Desktop Picture Changes to Solid Blue Automatically

I have never seen this problem. I have had one of Apple's standard black and white pictures as my desktop for years. All of a sudden (don't recall any changes to system) my desktop is solid "Apple" blue. If I change it to anything else it reverts back to the solid blue within a few minutes. I tried opening the console and viewing all messages to see if I could get a clue to what system call might be change it but I saw no messages occur as I observed the desktop picture being changed.
Can anyone tell me how I might track down what is changing my desktop picture?

Thanks, I should have thought of that.
I tried it and it didn't work. My desktop picture changed almost immediately after logging in. but it did lead to the solution. I noticed that the desktop picture changed at the same time as Entourage Alert's launched (this was turned on the same day that the problem started. So I turned off Entourage Alerts and logged in and out. The desktop picture has remained as selected.
I'm not interested in running Entourage so I don't care about the bug.

Picture changing effect!?

Hi there,
Does anyone know how to make this picture changing effect on a mac?
http://www.aegistraining.co.uk/
Desperate to put it on my website, but not sure how to do it! Not even sure what to call it ! Almost like a slideshow i guess!
Would be very grateful for advice, Thank you!

That's "flash".
Depending on how much of it you may need to do you might take a look
at "http://www.verticalmoon.com/"
They have a "slide" program that might work for you.
I will create an "swf" file that actually has better compatibility than QT if one's not using an Iphone or Ipad.
I imagine there are others, but I have theirs and it works well.

I want to sync my audio with my pictures

I want to sync my audio with my pictures in iDVD and can't get it to work. How can I do it manually?

All you can do in iDVD is select an audio track or playlist from iTune and set iDVD's slideshow Slide Duration to Fit to Audio:
If you have an older copy of iMovie, specifically iMovie 6 HD you can precisely set your music to yoru photos with fade outs and ins as you need:
It's, by far, the best version of iMovie for manipulating audio.
OT

Hi guys, I've been given some .mov files to use. When I play them I can hear the audio but the pictures are green. The client says they play for him. I am on mac 10.5.8 and FCP 6.0.6. Any clues as to why this is happening?

Hi guys,
I've been given some .mov files to use on FCP.
When I play them I can hear the audio but the pictures are green. The client says they play for him.
I am on mac 10.5.8 and FCP 6.0.6.
The files details are the same as a file that will play.
Apple Mpeg IMX 625/50
(50 Mbs)
720 x 576 millions
16-bit Integer (Little Edition)
I've been told this happened to somebody else last week, but didn't get a resaon why.
Any clues as to why this is happening? I suspect it's a codec issue of some sort
Cheers,
G

FC 6 supports 29.97 & 25 IMX frame rates but a third party plug-in is required:
http://manuals.info.apple.com/en_US/FCP6_HD_and_Broadcast_Formats.pdf
This plug-in costs $100
http://www.nanocosmos.de/v4/en/products/quicktimeIMX.html
This software is cheaper at $30 and will let you test drive it for free
http://www.pavtube.com/guide/working-with-xdcam-imx-media-in-fcp-avid-imovie-ppr o.html
There may be a free option available but I'm not aware of it.

When I assign an address from google map to my contact, my contact pictures changes to a map. How do I prevent that from happening??? thanks

When I assign an address from google map to my contact, my contact pictures changes to a map. How do I prevent that from happening??? thanks

It isn't. Forward it to [email protected] and then delete it.
(109195)

Frequency of desktop picture change

I have lots of photos I use as desktop pictures. I like my Mac set up so the desktop picture changes frequently, like a continual slide show. However, five seconds is too short and one minute is too long. Is there a way to "hack" the system preference so that I can set the change frequency for say, 15 seconds or 30 seconds?

The relevant key section is at the top of my file. Did you already have a value set for the slideshow? Apparently the key is created when you first run the background slideshow. So, you might first set it and run a 30 second slideshow, then open the file and look for the key value.
Mine looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Background</key>
<dict>
  <key>69473572</key>
  <dict>
  <key>BackgroundColor</key>
  <array>
   <real>0.0</real>
   <real>0.0</real>
   <real>0.0</real>
  </array>
  <key>Change</key>
  <string>TimeInterval</string>
  <key>ChangePath</key>
  <string>~/Pictures Folder/‚Ä¢Desktops</string>
  <key>ChangeTime</key>
  <real>1800</real>
  <key>ChooseFolderPath</key>
So maybe that will help you find it.
Mac OS X (10.4.7)

Why does my user account picture change to my contact picture at login?

I have my contact information in the address book with a photo of me. Then I have my account user picture a different picture. After waking the computer after sleep or screensaver the login dialogue box picture changes to the one I have set up for my contact info. It's annoying.

You are correct - it is very annoying! I haven't found a way to disable that yet - other than by deleting the picture in the Address Book.
Give Apple some feedback!
Cheers,
Rodney

AUDIO JUMP AS PICTURE CHANGES

Similar Messages

Maybe you are looking for