Audio keeps cutting randomly (but timer keeps going) in all devices (mac, android, pc and ps3).
Hi guys! Anybody having the same?? It is like i'm working with a poor connection, audio cuts every minute. I thought that might be the connection but I see the time counter running while audio is out! I've tried reinstall, but it is happening with all devices. ps: i have a nice internet connection (50mbps optic fiber) Thanks!
Hello, i have similar problem that has been disappeared when i switch back FROM 1.0.9.133 TO 1.0.4.90.g0b6df40b.
Version 1.0.4.90.g0b6df40b could be found on filehippo.
I have blocked automatic client update and at the moment all works fine.
To block automatic update put a file named Spotify_new.exe as READ-ONLY in the spotify program folder.
I think spotify developers spent too much time on social networks while write code or they could be drunk.
I dont know and i cannot accept it.
If my company works with this "quality" surely we close out of business in a day!
Similar Messages
-
I have one apple account and one apple ID. I have several devices under that ID. Why when I download and app on one device it goes on all devices?
Click here and use the instructions to turn off the automatic downloads.
(104598) -
Timeline visuals stps, but the audio keeps going?
Currently I am using using FCPHD 5.0.4, and I have noticed the Timeline seems to stop playing, the image freezes on the screen and the audio keeps going. Any ideas as to what would cause this? Rebooting seems to solve this issues..sometimes.
It's good to thank everyone, you can also reward them with points...
New Discussions ResponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...
Patrick -
when accepting the terms and conditions for the new terms of agreement of the policy, i press accept the terms and press agree and it will not allow me to purchase the music because it keeps going to the same page of terms and agreements
If you can't scroll to the bottom
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. -
When I tap on my Facebook App on my IPad it tries to open up but then it goes right back to my home page and will not open up. All my other Apps work ok.How can I fix this ?
Try deleting the Facebook App and reinstalling it.
-
can you help me, i try to import video from my gopro to final cut pro but when i play the video he become very slow and i lose qualiter ???
Right click one of yur clips in the event browser and choose Transcode Media. Make a test project and playthat clip. See whether that solves your lag.
Russ -
Hello I need some help...both my husband and I have iPhone 4 phones, we also have an iPad. We bought our son and iPod for Christmas and while setting it up I must have done something wrong as now it seems that messages are going to all devices. At this time we only have one Apple ID for all, my question is is it best if I set up a separate Apple ID for the iPod and if I do that will my son still be able to have the music and apps from the original Apple ID? Or is there a way that I can have all the devices be separate while only using one Apple ID?
Before going through the trouble of creating a second Apple ID, you should open all of your devices and go into Settings>Messages>Send & Receive. Here, you can assign everyone one and only one designated phone number (or email if the device is not a phone) to send and receive messages from. This will make life a whole lot easier than having multiple iTunes acounts to deal with.
-
I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working. I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem.
My network consists of 4 base stations set up in a roaming network - same network name and passwords. I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn. The network works pretty well since I went to a roaming set up. Good performance, yata, yata, yata.
However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address. When the AEBS is set to bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding.
I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS. I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS. In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding. However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode.
I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope. What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
I'd appreciate any insight into this that anyone might have. I've hit the wall with what I know.
Thanks.In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first. -
My photos will not sync to my Apple TV (1st generation), ipad, iphone, or itouch. They used to be there but upon recent syncs with all devices they have all gone. I am totally baffled as I have not changed settings?
I had the same thing happen to me. It's a bug in iPhoto 9.4.2.
The first time you run iPhoto after upgrading to iPhoto 9.4.2, it "updates the iPhoto library". This sometimes tickles a bug where iTunes can see all your iPhoto albums, but iTunes thinks they are empty. Since iTunes thinks all your albums are empty, it dutifully deletes any photos from your synced iOS devices.
It's easy to tell if this is the problem you are seeing. Open iTunes and go to the photos sync panel for one of your iOS devices. If you have multiple albums checked, but iTunes shows a total of 0 photos, then you have the problem.
I spent an hour with an Apple Genius. he couldn't find any mention of this problem in their internal support system. His recomendation was to reinstall the operating the system. I suspect that this won't solve it.
The only solution I have found is to restore iPhoto 9.4.1 and the corresponding iPhoto library from your backups.
I would refrain from upgrading to iPhoto 9.4.2 until Apple has a fix for this issue. -
i updated my mac which is an O X LION .7 but after the update has completed the mac rebooted itself and never stop booting
flamebliss wrote:
yes wen i try booting in Safe Mode it behave the same. i have downloaded the combo update of 10.7.5 from another laptop, so how do i run it on my mac. THANKS for helping
The goal is to mount the combo update .dmg on the desktop and then open and run it. If you can't get to the desktop to begin with, that won't work. Another approach is to treat the Mac's hard disk as just another HD by using a second Mac and then connecting the problematic one via Target Disk Mode. See http://support.apple.com/kb/ht1661. Note that both Macs will need Firewire ports and you'll need a FIrewire cable to connect them. With the combo updater, one of the steps in the process is to select the drive you want to install the update on. Once you're successfully connected in Target Disk Mode, the problematic drive should appear in the list.
If that doesn't work or Target Disk Mode isn't possible, the only other solution is to boot into Recovery Mode; see http://support.apple.com/kb/ht4718. Note that once booted into recovery mode, you have access to Disk Utility, and you should try running Repair Disk after selecting the bad drive to see if something's wrong with the directory which could be fixed. When you select that drive, you should also look at S.M.A.R.T. Status at the bottom of the window. It should say "Verified." If it says Failing or Failed, the HD needs to be replaced.
If the HD is OK, all that's left that I can think of is to reinstall Lion using Recovery Mode. I hope you've maintained current backups or at least complete Time Machine backups. Of course, if you have a backup and the backup is bootable, you could boot from that, wipe the internal HD clean, and clone the backup onto the internal HD. -
I have two external hard drives. One is my Time Machine backup drive. The other I use for external storage of files (documents, photos, movies, etc). Can I set Time Machine to backup BOTH my Mac hard drive and my other external hard drive?
Yes you can make multiple backups on one hard drive, for example if you’ve 1TB hard drive installed in your PC and you’ve two Mac Machines with 500GB drive each then you just make two backup images with size of 500GB each.
http://www.halfspot.com/use-your-pc-hard-drive-for-time-machine-backup/ -
I was logged in with a temporary profile on my pc, after restarting everything seemed to be fine. But my iTunes music is all in the cloud now, and my playlists are gone. What do I do?
My iTunes media folder shows ALL of my music still there (including all from imported CD's), but on my iTunes, it says most of it is in the cloud? As well as my playlists that I have had for YEARS, are all gone. I just recently got a new laptop and had my iTunes transferred over, when I re-downloaded iTunes onto it, everything popped up perfectly from this same file. Now after this "Temporary Profile" mishap, nothing is working properly with iTunes.
Help! Please.Do this. If all the synced media like apps and music are alread in the the iTnunes library just backup the iPod and restore from that backup
iOS: How to back up and restore your content
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities -
Dear Sirs,
I turn on the iTunes Match in my iphone3GS, but the itme of "show all musics" not show up and turn on, so when I open musics in my iPone3GS, the musics seems not be matched with iClouds.I means it doesn't work on.Hello there Jameskuo47,
In researching the issue you are experiencing I found an article that should help get your iTunes Match content to your iPhone. The name of the article is iTunes: How to add a computer or iOS device to iTunes Match and you can find it here: http://support.apple.com/kb/ht4913.
This section specifically:
To add an iOS device to iTunes Match
On your iOS device, go to Settings > Music.
Note:
iTunes Match requires iOS 5.0.1 or later; you can find the
latest iOS software here'
Tap the iTunes Match switch to On.To access your music in iCloud, open the Music Player app on your device.
Your music in iCloud will be integrated into your local music library. A download button will appear to the right of any content that you have in iCloud that doesn't already exist on your device.
Important:
When enabling iTunes Match on your iOS device, the music library on your iOS device will be deleted and then replaced with your music in iCloud.
Syncing music with iTunes will be disabled while iTunes Match is enabled on your iOS device.
By default, when adding an iOS device to iTunes Match, downloading over a cellular network is enabled1. To disable downloading over cellular for iTunes Match, choose Settings > Music > Use Cellular Data > Off.
All the best,
Sterling -
Realtek High Definition Audio keeps going out
I have a Pavillion e017 notebook the sound keep gooing off. Device manager shows all drivers are install correctly. I have upgrade to Windows 8.1 and works for a week or so than goes out again I 've also downgraded to Windows 8.0 resfreshed the computer it places new Windows files and leaves my stuff intact sound works but goes off after a few days. I have restored the PC sound comes bck on after few days is back off
Hello techky,
Thank you for posting on the HP Forums!
I understand your audio driver appears to constantly act up on you. This is definitely software related, due to the fact that it occurs after a few days of fixing the driver. This implies that a Windows Update or third-party program is breaking the driver's functionality. My suggestion would be to complete all Windows Updates, with these steps:
1. Open "Windows Update" in Control Panel.
2. Click "Settings", and then click "Install optional updates".
3. Next, click "Check for updates".
Once this is done, perform a Clean Boot of Windows, then uninstall and reinstall the driver. Let me know how this goes. Thanks!
Mario
I worked on behalf of HP. -
PC info:
Manufacture: Hewlett-Packard
Model: HP Pavilion dv6 Notebook PC
Processor: Intel(R) Core(TM) is-2410M CPU @ 2.30GHz
Installed Memory: 6.00 GB of RAM
System Type: 64-bit Operating System
Operating System: Windows 7 Home Premium
Product #: LW217UA#ABA
The problem is the sound keeps going out. An example: I'm watching a video and after a while the speakers start making a soft poping noise. The only solution that I have found to fix this is shutting the laptop for about an hour or so and when I open the laptop's speakers work for about an hour or two. It also happens with headphones. Even if I don't have a video or music playing I can still hear the poping noise. Please help me.Hi @Iconicspartan ,
Thank you for visiting the HP Support Forums and Welcome.Thank you for the detailed information very very helpful. I have looked into your issue about your HP Pavilion dv6-6150us Notebook and the popping sound or crackling noises.
Here is a document on troubleshooting sound.
Please make sure your updates have been done on the Notebook. In the device manager under sound right click and update the driver.
Hope this helps you.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!
Maybe you are looking for
-
OBIEE 10g and Workspace 11.1.1.3 integration
Hi All, I've been trying to integrate OBIEE 10.1.3.4.1 with Hyperion Workspace 11.1.1.3. I got it partially working, i.e. in Workspace Applications I can see Answers, Interactive Dashboards menu items. However, I couldn't get the single sign-on part
-
What's the best way to erase and reinstall Lion?
I'm a little confused by the various posts I've read about erasing and reinstaling lion. My MBP is about 4 years old. I upgraded to lion last summer and it never worked great, but over the last 3-6 months its been dragging. I want to start fresh.
-
USB port drawing too much power. The device that is plugged into it will be
I get this strange message every so often, sometimes more often than other times. It says: USB port drawing too much power. The device that is plugged into it will be deactivated. There are only two things plugged into the USB-The keyboard and mouse.
-
Basic question about upgrading from Mac OS X 10.4.11
Very simple - how do I upgrade my Mac to run the many apps & gadgets which now require more than 10.4.11? A friend said I'd have to change to Leopard/S Leopard. But is there another way? I think we might be confusing 2 different issues here. Thanks f
-
-------------------------------------------------------------------------------- Hi all, I have just converted 2 TV Shows and want to list them under "TV Shows" on my Ipod menu, how do I do it??? Can't find any distructons. Any help???? Thanks