Audio level is not the same

hi guys
my problem is that i have a 1h project with various materiales....some of them have high audio volume and some low
is there a way to make them all almost the same level (higest audio peak shouldnt pass the -6db threshold) without the need to do this manually?
i have cs4 version
thank you all in advance

I am not a fan of the Normalize Audio Effect, but that might be helpful. Personally, I use the Audio Mixer, and add Track Keyframes, while I ride Gain. This is best done, after one has edited everything else, as these ARE Track Keyframes, and if one changes the Clips about, the Keyframes will still be in effect.
Good luck,
Hunt

Similar Messages

Multiclips and multiple audio tracks playing at the same time

I've only just taken delivery of my first ever mac (only ever used PC) with FCP, and I'm loving it already! Done lots of reading and viewing of video etc etc, and it's not as daunting as I thought it might be. I have one question the books don't seem to answer, and I can only find one reference to this on this site, with no definitive response. FCP5 probably doesn't work this way, but just in case someone knows different......
I film and edit motorsport (karting) programmes for television in the UK, using multiple cameras. I usually lay all the video and audio tracks on the timeline, (synched) lock the audio for each (as it is engine noise, and I want it playing without abrupt changes at cuts as each kart passes each camera, whether in shot or not) then cut the video tracks and delete those video segments not required.
The most exciting aspect of FCP5 for me is the multiclip editing facility, which I have found very easy to learn and is going to save me hours of work! However, I want to know if there is a way of having each audio track from each camera used in the multiclip laid down on the timeline when you import the multiclip to the timeline from the viewer, in order that I can play each audio track from each of the cameras at the same time.
I know how to cut from angle to angle, leaving the audio from the selected angle as the one audio track playing, but I want all of the tracks to appear in the timeline and play at the same time. I know there's a bit of a workaround by locking the video and importing each audio track from each clip independently, but if you do have to re-synch one of the multiclips, this means the audio is not then synched with the original clip, which will have had an in point set before being imported in as part of a multiclip.
I can understand why you might want to keep audio from one camera only playing over the whole multiclip, or to switch between audio from each, but in my case I prefer all audio to play at the same time. The workaround is still do-able for me as I'm only talking about engine notes, which if they are a few frames out is not very noticeable at all, but I would like to know if I'm right in thinking I cannot do it the way I would like to?
Wish I'd used FCP from the start, but glad I've got it now.....especially with the 30 inch screen! It's 4.40am, been going over 19 hours straight and I'm still making comments like...."WOW, that's brilliant"...every half hour!
G5 Mac OS X (10.4.3) Quad, 8gb ram, 2 x G-Media GRaid 500gb Raids, 30 + 20 inch Cinema screens

...

Logic Express 9 Vocal Transformer Not the Same as Manual

I've searched high and low and cannot find anything. I just purchased LE 9 last week and as I was gong through the Effects manual noticed that the "vocal transformer" I have is not the same as the one shown in the manual.
The one I have with LE 9 only has 2 parameters/sliders and is the old hideous brushed aluminum interface.
Contrast this with the one in the LE 9 manual which has pitch, format, pitch base, mix, tracking, and robotize to name a few. (I also searched online and there are a few youtube videos of LE 8 with this same interface, so I know it's not new.)
I have FCS 2(Soundtrack Pro) on my machine, but as a matter of testing, I installed LE 9 on my iMac which does not contain any other audio applications and the same effect unit came up for Vocal Transformer.
Can anyone confirm that LE 9 should have the Vocal Transformer unit that I saw in the manual? It's a little frustrating to say the least.

Hi,
if I remember well, it was already like that in LE8. The manual shows theLogic Pro version.
So, unless I'm mistaken, it's simply a misprint in the manual...
Regards,
Jaap

How do you start 2+ audio files playing at the same time?

I am trying to play 2 audio files at the same time, but I cannot figure out how to start them playing at the same time without latency issues.
If someone can please explain the process for doing this using Audio Queue Services, I will forever be in your debt.
This is for iPhone, but I was getting no love in those forums on this issue.

Thanks for your reply. Apple's iPhone Application Programming Guide states the Following:
*Playing Multiple Sounds Simultaneously*
To play multiple sounds simultaneously, create one playback audio queue object for each sound. For each audio queue, schedule the first buffer of audio to start at the same time using the AudioQueueEnqueueBufferWithParameters function.
This leads me to believe that it is possible. I have just not been able to get them to play precisely the same time, there is always delay.

2010 i5 MBP USB Ports Not The Same? Griffin iMic Issue

I have a 2010 15" i5 MBP. I got one of the white iMics and it works fine on the port thats closest to the screen. However, when I plug it in to the port that's closer to the SD slot, it doesn't work. Under the audio settings screen, I see the iMic under Input, and the slider is to the right, but the VU meter doesn't register anything. However, when it's in the USB port by the power adapter, it works as it should.
I have read that certain model MBPs have USB ports that are not the same, and some people have problems with programs like Serato when it's plugged into the front port. Traktor and Serato have even mentioned that on the MBP there is one "good" port and one "bad" port.
Curious if anyone else noticed this. Again, it seems to only affect 2010 i5 MBPs.

Hi WebBrowser2,
As I understand your query its not a single doubt you are having at all, actually it’s a bunch of multiple doubt you are carrying here in your mind allied to Mac Book Pro (USB Ports are not working). There might be various reasons behind- not working of USB ports in Mac Book Pro, as you already had searched out various ways to fix all your issues. A few months ago, I faced the same issue as my USB port was suddenly stopped to respond, then I also tried to find various ways to get rid of this issue, and I found an informative blog link which has fixed this issue and make me tension free.
For more information visit at- http://www.olmtopsts.com/blogs/when-macbook-pro-usb-ports-not-working.html
And I am hoping- it will assist you in the same way as it assists me.

MB466 sound card with the MB990 is not the same?

MB466 sound card with the MB990 is not the same?
MB466 Audio Equipment ID:0x10DECB79 Audio ID:63
MB990 Audio Equipment ID:0x10DECB79 Audio ID:77

You can enable ClearType system wide for all programs to make other programs like Firefox use it.
* http://support.microsoft.com/kb/306527 - HOW TO: Use ClearType to Enhance Screen Fonts in Windows XP
Control Panel > Display > Appearance > Effects: "Use the following method to smooth edges of screen fonts"

Sleep not the same with SysPrefs as Apple menu

When I choose Apple Menu>Sleep, I can hear the computer going down, the whirring, etc. stops. This never happens with the System Preferences Computer Sleep timer. It always keeps whirring/clucking, etc. Is this normal behaviour? Why isn't the level of Sleep the same? I'm pretty sure it was the same way with my last OS (Tiger).

poflynn wrote:
bump
Are there different levels of Sleep that aren't mentioned?
No there is not different levels of sleep. Sleep is sleep.
Make sure you are on the correct tab of the Energy Saver page. there is one for AC and one for battery. If this happens when on AC make sure it is set correctly on that tab.

Log-on client 200 is not the same as BI clients "600"

Hi Experts,
My data load got failed and when i checked the error message, it says " Log-on client 200 is not the same as BI clients "600"".
Diagnosis
You are using client-dependent BI functions in client 200. However, the standard BI client is 600.
System Response
The function is terminated.
Procedure
Maintain a destination in the BI standard client. For information, see SAP Note 522569.
I went through the sap note and checked the maintenance of rfc desination. But not able to uderstand this issue. Do anyone have good idea about this issue.
Thanks in advance.
Anand

Hi,
In BW, you must work on only client. As the error said, you log on to client 200, but using 600 client as the connected one. Please check the source system conncection whether it is given for the default client in RSADMINA table BWMANDT field or not. if not change that.

Line item Ship-to Info is not the same in Header Ship-to Party During Sales Order Creation via IDOC

We have observed that during creation of sales order using idoc, the line item ship-to party is not the same with header ship-to. The ship-to party info in line item is equivalent to the header's sold to party. To give you a quick background, Sold to party info is given in idoc and ship to party is being determined using table EDPAR. In this specific scenario, sold to customer is not the same with ship to customer.
Initial checking on the code leads us in function module VIEW_KUAGV. This FM populates partner details of sales order header and line item in program LVEDAF1Z
Below is the code for Sales order Header. Notice that WE_INPUT parameter which contains Ship to party is passed as exporting parameter in FM VIEW_KUAGV. This is the reason why Ship to Party is populated correctly in sales order header but not in sales order item.
Initially, it first set to Sold-To Party. However, if WE_INPUT is given or provided, partner details is set to Ship-To Party.
Please advise on how we can make the ship to party info in header and line item be consistent. This is SAP Standard program which why we are hesitant to make change on the program. If there is a configuration to make this happen, kindly advise.
Regards,
Rommel

Hi Jayesh,
If I understand you correctly, you want that when creating SO from Quoatation
the Ship to Party also follow/copy Ship to Party from Quotation, right?
Just to confirm with you, when you creating SO reference from Quotation, you
use copy/follow-up function, am I right?
You can do this by setting in configuration of Copy Control (like mentioned by Hui).
Step as follow :
1. Go to IMG->CRM->Transactions->Basic Settings->Copying Control for
    Business Transactions
2. Create your BAdi (Business Add-In for Copying Control), such as get Ship to
    Party value from source document and use it in current document
3. Use this Rule you have created in BAdi (no. 2), in copy control transaction type
    IMG->CRM->Transactions->Basic Settings->Copying Control for
    Business Transactions-> Define Copying Control for Transaction Types
4. Here you set Copying Routine for your transaction types (put name of your Badi
    created in step no. 2)
Or alternatively, you can set it on access sequence in Partner Function
Ship to Party in configuration. You can define access sequence the Ship
to Party is taken from Preceeding Document -> Ship To Party
1. Go to Partner Function access sequence :
    IMG->CRM->Basic Functions->Partner Processing->Define Access Sequence
2. Create new access sequence with following entry :
    - Source COM_PARTNER_A (PrecedingPartner)
    - Check Mapping for Partner Being search
    - Partner Function in Source = Ship To Party
3. Assign this Access Sequence in you Partner Function used in Sales Order Transaction
   Type.
Tell me if this is what you looking for
Gun.

With iTunes match, order of the songs in my playlist of mobile devices is not the same as on my computer

In my iTunes on computer, I have several smart play lists. Within each playlist, songs are set to a certain order. Some playlist songs order are organized by name, some playlists are organized by Album, some playlists are organized by artist etc.
When I was syncing my iPhone and iPad directly with my computer, the playlists on my mobile device had same order of songs as on my itunes in computer.
Now, I signed up for iTunes match. With iCloud sync, order of the songs in my playlist of mobile devices is not the same as on my computer. In fact, order of songs within a playlist appears to be completely random. Moreover, order of songs are different in my iPhone 4s and iPad 2
How can I change the order of songs on my mobile devices or how do I make iTunes match to sync my songs such that within a playlist, my songs are in the same order as that of iTunes on my computer.

Thanks mracole. I assume this means order of songs will work with regular play lists I iTunes match. Will try it this afternoon and report.
Please let me know if my understanding is not correct.
Best regards and thanks once again.

I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able toauthorize it under your ID. In that case, contact iTunes Support.

Recording Audio and Midi at the same time in Logic 7 Express Can it be done

I am wondering if I can record audio and midi at the same time in Logic 7 Express. I am running my guitar thrugh a Roland GR 33, and a line out and using the GR 33 to trigger sounds in the Logic's synth section but cant seem to record all three tracks at once. If any one knows how let me know. Oh and I am running the GR Synth and Guitar into the Prosonus Fire Fox and have the GR 33 out midi to the Fire Box as well. So I guss the question is how do I sent up two audo tracks and one midi track to record in real time. Thanks Victor

I am wondering if I can record audio and midi at the
same time in Logic 7 Express. I am running my guitar
thrugh a Roland GR 33, and a line out and using the
GR 33 to trigger sounds in the Logic's synth section
but cant seem to record all three tracks at once. If
any one knows how let me know. Oh and I am running
the GR Synth and Guitar into the Prosonus Fire Fox
and have the GR 33 out midi to the Fire Box as well.
So I guss the question is how do I sent up two audo
tracks and one midi track to record in real time.
Thanks Victor
Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
HL

HT5312 how do i reset my admin password, my apple iD password is NOT the same as my admin login password

all ive been seeing is that i can reset my password with my apple iD, but its not the same. and it doesnt do the command R thing or the terminal/utilities thing. so what do i do??

Phil,
First of all, to log in as the HTML DB administrator, you want to use a different page, one that ends in /pls/htmldb/htmldb_admin Try logging in there. If that doesn't work, see this thread about creating a new admin account:
stupid password tricks
Sergio

My iPhone serial number and IMEI is not the same as Apple server

Hello,
My problem started when I want to unlock my iphone 3gs via Imei.
My old iphone broke about a month after i bought it (it was 2 years ago), so i sent it to Movistar to change it (i think that they sent it to appleCare). Now Movistar told me that i have to send the old iphone imei in order to unlock the iphone i have now, i ask apple for the repair order receipt, then i received an email and i could see the information about the 2 iphones: the old broken one and the new one.
Then I realized that the iphone they sent me as a replacement (the new one) is not the same iphone i have. The serial number and the Imei are different, so, should apple change this data in their server in order to unlock my iphone or what can i do to solve it?
There is any formal way to perform this data change?
Thank you in advance,
Francisco Marzabal

Here we work with repairs for devices that does not have waranty (expired or other issue). In this case, I did the screen replacement. No other ipad was on my station, the ipad arrives, i took it change the glass, put everithing back, give to customer. Thats it. The job was done by me, the customer test his ipad in front on me, works fine, everything ok. Few days pass and he came back saying that it wasn't his ipad, he brings the box that the ipad came and ask me why the serial number does not match the serial number in the box (sorry NOT in the back of the ipad).
There were no other part changed only glass. After 7 years working on this, thats the first customer complaining about a work done here. After this I was curious and look for more information and some forums, also one port here is claiming that the serial number on the device is not the same as the box where it came.
I just want to make sure that there are possibilities that there could be such mistake during the packaging process.
Thanks for the replies

HT204053 My Icloud account number is not the same as my Apple Account how can I change my I cloud account to match my apple . None of my photos are going over to my I cloud

My Icloud ID is not the same as my Apple ID how can I chamge my Icloud ID to match. Non of my photos are streaming over to my Icloud and I have been paying extra for additional storage space.

Start here, change your country if necessary and go to manage your account and request another email.

Audio level is not the same

Similar Messages

Maybe you are looking for