Audio Line-in input and BT Headset output not working

Hi,
I'm trying to run the Line-in into my MBPro and route the output to my Logitech H800 BT Headphones at the same time (a pass through), but can't get it to work.
I have tried to run the line-in to the Internal Speakers and can not get this to work either.
Steps to taken:
1. Go to the Sound window by selecting the Sound icon from System Preferences.
Next, I route the Line-in by:
2. Selecting the Input button from Sound Effects, Output, Input buttons.
3. Select "Line In" from the Select a device for sound input list.
4. Select "Sound Input" from the Use audio port for drop down list
5. you should see activity on the Input Level.
6. Next, select the Ouput button from Sound Effects, Output, Input buttons.
7. Select "H800 Logitech Headset Stereo (or Internal Speakers) from the Select a device for sound output list.
8. Verify that "Sound Input" from the Use audio port for drop down list is still selected.
9. Also, verify that the Mute checkbox is not selected in either the Input or Output window.
10. NO SOUND :-(
11. If I pull up a radio station in a webbrowser, I can listen to it without issue. So, I think audio out is set correctly.
12. If I install Audacity: 1) It shows the audio input and output to be set as above (Built-in Input/H800 Headset). 2) If I record and then playback, it records the audio going in the Line-In and plays back accross the H800. 3) Also looked for a Monitor function in Audacity but could find one to test simulataneous I/O.
Any idaes welcome ?

ahh sry, thats how the line in works on my Mac Pro, I guess the Macbook is different. This is a program I use in conjunction with another called 'soundflower' to route my audio to all the places it needs to go:
http://www.macupdate.com/app/mac/11333/linein
If you need to run multiple instances, you can open up terminal and type
open -n /Applications/[PUT PROGRAM NAME HERE].app/
It will open up another instance every time you run that script.

Similar Messages

How do I use one audio jack as input and one as output?

On my MacBook Pro, if I get a USB-headphone connector (to add another audio port), will I be able to set one audio port as input and the other as output? To use the port coming out of the USB jack as a headphone jack, and plug a mic/output device into the computer's port?
I'm thinking about buying a "Sabrent USB External Stereo Sound Adapter". I have a preamp that is NOT an interface, and I want to be able to monitor what I'm doing so I can multitrack. But my MacBook only having one audio 1/8 inch jack makes it so I have to choose either input OR output...I'm hoping if I add an extra port via USB I'll be able to have one of each.
Thank you!

Roger Wilmut1 wrote:
nategm wrote:
On my MacBook Pro, if I get a USB-headphone connector (to add another audio port), will I be able to set one audio port as input and the other as output?
Yes, either way round. In System Preferences>Sound you can set the input and output ports separately.
Roger, the System setting have -Nothing- to do with the question being asked. Do you use Logic Pro audio software? If you did you would know Logic has it's own audio settings that run independently from the System audio. There's also the fact that Maverick has problems with "some" older USB 2.0 audio hardware. Basically, this is not a slam-dunk, that's why I suggested asking someone if they've used this combination before. Although... the USB audio device is cheap ($10) it might be worth it to try. Still.............**
** I question the wisdom of using cheap audio hardware on a computer that cost $1000+, software that costs $200 and then using the internal audio chip ($2) and an external monitoring device that costs $10. Defeats the whole purpose of using professional audio software.

Audio line out port (Apple iPad Dock Connector) not working Iphone 4 os 4.2

For my new iphone4, the audio line out port (Apple iPad Dock Connector)is not working. Both using a cable to mini jack (3,5 mm) or in dockingstation.
I'm using OS 4.2.
IS this a bug?
Thanks
Hans

I just came back from the Apple store. My iPhone4 DOES have a working line out when plugged into a Apple name brand dock connector. I don't know why my SendStation refuses to work only with the iPhone4 yet works with iPods, etc..
Solution? I'm buying an Apple iPod dock connector for home and will try to find something with line out for the car - Apple says they do not make one.

Sample rate off the audio input and out devices do not match - what to do?

This is fundamental, I know, but nevertheless I can't find my way around it. I get this error message when trying to recor:
Sample rate off the audio input and out devices do not match
and am asked to do this:
Use the appropriate operating system or audio device control panel to adjust the sample rates of the input and output devices to use the same settingt.
I have defined the sample rate to 44.1/16 bit in accordance with my inbuild soundcardt.
I am trying to record from LineIn.
When running on a M-Audio sound card I don't face any problems.
HP 8560W, sound card IDT/High definition audio Codec
Any suggestions?
Knud
Copenhagen

You're sure you have set BOTH the input and output settings to 44.1 16 bit?
Which version of Windows are you running? There are a number of posts on this forum about how to fully access both the Windows Mixer and the Mixer for your soundcard. Especially, you need to ensure that all "Windows Sounds" are turned OFF.

Audio line-in input won't work

Hello,
have used Garageband several times in the past, and have had no problems setting the input as audio line-in to record my guitar. However, I tried again for the first time in a couple of years the other day and neither my Powerbook or my iMac would allow me to do it. In System Preferences, the audio line-in input option was not in the drop-down menu. I could only choose iSight or built-in microphone.
I don't think it is the mini-jack adapter that I am using that is the problem. It hasn't been damaged as far as I can see and fits in the socket fine. I tried it in the headphones socket and it clicks in place there and registers in the system preferences. Has there been some kind of bug in a recent(ish) update that has killed audio line-in inputs?
Am running Leopard on PowerPc processors. Realise that the tide has turned against these two computers and that they will need replacing in the next year or two.
Any help massively appreciated ...

Did you see the fix for this problem and did you try it? I use to do a lot of direct line in recording with my guitar and now I have the same problem. I won't be able to try to fix till tonight. I am in Oregon. So I was just curious if you got a solution.
Cause I am kind of ****** about this.
I would appreciate you feedback!
Thanks
Mat

When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille

My Siri and microphone in other apps hasn't been working lately. I've cleaned the mics, took off te case, and it's still not working. My camera only picks up audio when it's off of vibrate. And now I can't answer texts with the new pull down thing.

My Siri and microphone in other apps hasn't been working lately. I've cleaned the mics, took off te case, and it's still not working. My camera only picks up audio when it's off of vibrate. And now I can't answer texts with the new pull down thing. please help

Hello Sarahd200037,
Thanks for using Apple Support Communities.
To troubleshoot the microphone on your iPhone please follow the steps in the article linked to below.
iPhone: Microphone issues
Take care,
Alex H.

Headset does not work after latest update...

It is very "strange" that since the latest system update on my Z3 compact my headset is not working at all. I use my all time favourite iphone 4 headset. It worked flawlessly before the update but now if I plug it in, the phone is not recognizing it at all and the walkman still plays on the phone speakers. Before the update I could listen to music, use it for making calls and so on. Since the update, nothing is working. My headset is working fibe by the way, so it is not a hardware fault. Works like a charm with other phones, and on the top of that if I use the app Soundabout the music works with the headset but the calls are still not using my headset. Do not tell me to use the sony headset which was in the package because I hate it. Has poor audio quality, falling out of my ears constantly and the cable is everything but not flexible. So it is a shame that I need to use an app to get my headset work on my new phone...

I understand you don't want to use the bundled headset, however for troubleshooting purposes can you please test it and let us know if it works.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Palm Pre Headset Functions Not Working after 1.3.1

Anybody else lose the functionality in their headset (pause, skip to next song) after installing 1.3.1?
Post relates to: Pre p100eww (Sprint)

I too have this headset issue on my Pre.
I have webOSDoctored my Pre back to 1.2.1, and yet the headset still doesnt work on voice calls.
I tested the ##8378# choosing manual test on audio then phone, and this does work. I can hear out of the headset just fine.
This stricks me as odd since testing the audio works but voice calls donot...
I then re-updated to 1.3.1 hoping somthing would magicly work for me again, but nothing. The headset still not working on voice calls.
My last resort is to either get some more ideas on this forum or use my Sprint insurance and get a new Pre... which ever comes first.

Security and privacy system preferences not working after Lion install. What to do?

Security and privacy system preference not working after Lion install. Not sure if it happen with Lion installer or after updating. What to do?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

My headset is not working what should I do?

Recently I bought Iphone 4. The headset is not working. I need to do any settings for this? Please guide me.

Hey M Dilip,
The best solution is to Just take it to the Apple Store, Especialy if its new. There is no Way to Disable or Enable Audio or Audio In-Put on an iPhone 4. So Take it back to the Place you Bought it at, and explain the Problem in Full Details. They Should Be More than Happy to Exchange it for a working one.
I Hope This Helps!

Audio Jack of my HP Envy 4 is not working anymore

Hi all,
I have purchased HP Envy 4 just a 4 months ago and now something worong with its audio jack for headphone and its not working anymore. The hardware profile for this audio jack shows no error but its still not working. Is there anyone who can help me out this issue???
Regards,
This question was solved.
View Solution.

Lets start with you helping us by identifying your notebook completely.
HP has produced and brought to market more than a thousand different models of notebooks and desktop PCs over the years. It is difficult to help you if we don't know which specific model you own..
Method #1: If the notebook will boot into Windows, you can retrieve your Product Number by pressing Fn + Esc key.
Method #2:
Remove the battery and look in the compartment where the battery was installed. You should see a Service tag with printed part number and a product name. Please post the p/n (with all alphanumeric characters) here. If you live outside of North America, it helps us if you post the country of purchase. Also post the installed CPU type. (AMD or Intel)
Don't forget to post the name of the installed operating system if you haven't already done that.
If Windows 8 is installed, you can invoke the search charm and type in the word audio and then on the right hand side of the screen click on Settings. On the left hand side of the screen, you should see an option to select Find and fix audio playback problems. Try it to see if it resolves the issue for you.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

After updating my iPhone 4 to iOS7, the controls on the headset are not working anymore. However, the controls are working on my friend's iPhone 5. Is this a common issue?

After updating my iPhone 4 to iOS7, the controls on the headset are not working anymore. However, the controls are working on my friend's iPhone 5. Is this a common issue?

ofel wrote:
After updating my iPhone 4 to iOS7, the controls on the headset are not working ..
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

Drag and drop feature is not working in Maverick?

what can i do when the Drag and Drop feature is not working in my I Mac Using Maverick 10.9.4, it will not do it at all i must do copy and paste.
reading from earlier forums this has been a problem in earlier versions for the mac.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

I've bought a iphone 5c from USA but the headset is not working properly its still in warranty,can i go for replacement of headset??

I've bought a iphone 5c from USA but the headset is not working properly its still in warranty,can i go for replacement of headset??

Since it is only the headset that is the problem and not the iPhone it would be better to just buy a new set and not let yourself be frustrated over it. If you send anything to your sister before the one-year warranty is over, include the headset so she can exchange it at an Apple store.

Audio Line-in input and BT Headset output not working

Similar Messages

Maybe you are looking for