Audio Line-in Port not working after upgrading to Lion

I have recently upgraded to OS X Lion...
since then, I am trying to continue my Rosetta Stone program, and it hasn't been able to detect a mic.
So i opened system prefs and looked and it won't register any of the 3 different mics I have plugged in.
The input level never increases, showign that it doesn't even recognize something is plugged in.
I didn't have this problem until I upgraded.
Please Help!
thanks,
J

Anyone, anyone?

Similar Messages

Audio Line-In Port Not Working

I plugged a Shure mic into the Audio-In Port and is doesn't work. I'm using FCP Voice-Over but I get no audio on Soundtrack either. Worked with all the settings and preferences for audio. Also tested a second mic which also doesn't work. I read some people had problems with Audio-In Port after upgrading to 10.4.10. I ran a check for audio updates, there are none that I haven't installed. Why can't I seem to make a simple mic work when it's been so simple previously?

Your Mac does not have a microphone input, only a line-level input (in fact, no Mac has included a microphone input in quite a while). So you'll need 1) a self-powered microphone that outputs line level, 2) a USB microphone, or 3) an external audio device that supports microphone inputs, either a mixer that will give you line-level output or a USB audio input device. One possibility for a USB device that works for many people and that is relatively inexpensive (ca $40.00 US) is the Griffin iMic. It works with any standard personal computer microphone.

HDMI ports not working after upgrading my Windows 7 to Windows 10

The HDMI ports of my HP Pavillion DM4 Windows 7 was working very excellent whenever connected to my amlifier (YAMAHA RXV 477) and projector.... after upgrading my OS into Windows 10, the port doesn't work anymore. There are no signals going to the amplifier or projector..... Please help me solve this issue...tnx!

Hi,
Download and install the switchable graphics driver on the following link.
http://ftp.hp.com/pub/softpaq/sp59001-59500/sp59147.exe
When the installation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Wecam and USB mic input not working after upgrade to Lion

The audio inputs (micraphones) all show up in Syetem Preferences but if I talk into the microfones (on USB soundcard/Trust Webcam) no levels are being shown, I have tried clicking on eatch input it turh but n luck.
I am getting the impresion Lion broke lots of audio atuff so dont hold up mutch hope for a solution (Except upgrading to Snow Leperd).
Any ideas,
Ben

Beginning with Leopard, Mac OS X supports the so-called UVC web-cameras, you do not need any driver for them. I have just bought a small, pretty and cheap one, Logitech C110.
My older Genius 1321 is unfortunately unusable from SL onwards, but works with Tiger and Leopard. It is not UVC, and drivers are not available any more.
conclusion: if your camera is not UVC will not work via ‘plug-and-use’, you need an updated driver, check with the manufacturer. If they do not offer any, buy a UVC one, they are very cheap, but you do not need anything. The one I have just bought works fine, and also has internal mic.

Bash commands not working after upgrade to Lion

After upgrade, many BASH commands not working. For example, such a fundamental thing as "ls".
iMac20:bin a$ ls
Launch of "ls" failed: the PowerPC architecture is no longer supported.
What does it have to do with PowerPC? My computer is 2.66 GHz Inter Core Duo

Linc,
iMac20:~ a$ which ls
/sw/bin/ls
Also, I managed to look (using tcsh's ls-F command) into the contents of /usr/. Here's what I see there:
[iMac20:/bin] a% ls-F
[*          csh*        echo*       ksh*        mkdir*      rcp*        stty*       wait4path*
bash*       date*       ed*         launchctl* mv*         rm*         sync*       zsh*
cat*        dd*         expr*       link*       pax*        rmdir*      tcsh*
chmod*      df*         hostname*   ln*         ps*         sh*         test*
cp*         domainname* kill*       ls*         pwd*        sleep*      unlink*

Mail not working after upgrading to Lion

I have recently upgraded to Lion and my Mail program will not open. I get a message that says that "You can't use this version of Mail with this version of Mac OS X. You have Mail 4.5". I would have thought that Lion would have installed the latest verion of Mail. I have tried reinstalling Lion and I get the same result. What do I do to correct this?

I am pleased to say I was able to resolve the issue. The problem was the Lion installation did not replace the Shortcuts on the desktop. These shortcuts were linked to the older Mail program. The same was the case with my Address book. I deleted the shortcuts on the desktop and then created shortcuts to the updated programs that were in the Applications folder. Now they all work.

ITunes not working after upgrading to Lion OS V10.7

I have upgraded to Lion OS V10.7 but I lost all my playlists on iTunes. I tried restoring iTunes from my last back up, but now I am unable to open iTunes at all.

Yeah, that's happened to me a bunch, it's a pain the the arse. Delete your shortcut and create a new one.
To do this navigate to the c:\program files\iTunes folder (assuming you've selected the default location) and find the iTunes.exe file using the right mouse button right click on it and you should get a menu with an option to create a shortcut. Once the shortcut is created you can drag it and drop it wherever you need, start menu, desktop or quick launch bar.

USB 3.0 ports not working after upgrading to Windows 8.1

I have an Asus WIndows 8 laptop that I just upgraded to Windows 8.1 today. My USB 3.0 ports have started acting up. At first they recognized some of my external hard drives but not others. I tested all of the external hard drives and they work fine on my
other machines. I've tested the wires as well. Now, when I plug my external hard drives into the USB 3.0 ports, none of them work at all. All of them work fine on the 2.0 USB port though. How can I get my USB 3.0 ports working again?

my logic is like this, this motherboard is tested by Operating system that listed at download driver, you can check here
http://www.msi.com/product/mb/970AG46.html#/?div=Driver&os=Win8 64
there is an update 1.16.12 for USB ASMedia USB 3.0 Driver but for Windows 8
In order to worked with Windows 8.1, you need the updated driver, because this motherboard comes before Windows 8.1 launched
try to apply this registry trick, please don't applied hotfix since only applicable with Windows 8 and Server 2012
http://support.microsoft.com/kb/2830154/en-us
also check your BIOS setting, Disable USB selective suspend setting at power plan
Please do
http://windows.microsoft.com/en-us/windows-8/upgrade-assistant-download-online-faq

Time Machine not working after upgrading to Lion

I have a Time Machine 1.2 which worked perfectly on my old iMac OSX. A few months ago I purchased a new iMac which came with Snow Leopard, and it worked well. But when Apple came to upgrade me to Lion, the Time Machine no longer works. Is it not compatible with Lion??
At one stage I was told there was no room on the disk. I then tried to delete most of the previous backups, leaving only a handful of backups - but still no luck. I think I might have messed up things by then trying to edit the "do not back up" list. I tried to exclude some programmes applications , and now I am told there are no disks available to be backed up.
It is not very clear on the "options" screen, what one should do. What does the + and - indicate, and is it necessary to remove any files at all if I want a simple regular backup procedure on my home computer.
Lastly - if I wanted to uninstall and reinstall the Time Machine - is there a procedure?? I can't find one.
I hope someone can put me right.

I was brave and did what you said. (Thanks for being patient - I am an old lady).
I erased the external drive (called Time Machine Backups) in the diskutility.app.
Now - when I restarted Time Machine I am still told that there are no disks available to be backed up, and that this can happen if all disks are in the “Do not back up” list.
So maybe I really did mess up the list of items to be excluded from backups?
How do I restore the list now to what it should be?

Built-in Apache webserver not working after upgrade to Lion?

Since the update to Lion the built in Apache web server won't start. When I click on the box in "System Settings" -> "Sharing" the little light briefly turns yellow and the box unchecks again. I could not find any error message in the console. Any suggestions?

Take a look at https://discussions.apple.com/message/15710540#15710540
Worked for me.

Image capture not working after upgrading to lion. New MacBook pro 13".

Anybody else? Any suggestions?

I was brave and did what you said. (Thanks for being patient - I am an old lady).
I erased the external drive (called Time Machine Backups) in the diskutility.app.
Now - when I restarted Time Machine I am still told that there are no disks available to be backed up, and that this can happen if all disks are in the “Do not back up” list.
So maybe I really did mess up the list of items to be excluded from backups?
How do I restore the list now to what it should be?

HDMI Port not working after Windows 10 Upgrade

My HDMI port quit working after upgrading to Windows 10. The VGA port works fine. I have triend many of the fixes for listed for this issue for upgrading from Windows 7 to Windows 8/8.1. Here's whay I've done so far... 1) Downloaded the most recent drivers for my Intel(R) Graphics Card. Outcome: It said the drivers installed were newer than the driver I was installing. Tried anyway, didn't work. 2) Uninstalled the driver and let windows update it.Outcome: Black screen, then it restarted and installed the same driver it had before. 3) Tried installing the Windows 7 Driver for my Intel(R) Graphics Card. Outcome: Black screen, then it restarted and installed the same driver it had before. 4) At this point I tried the last resort. I spun around three times in a circle and spit in the corner.Outcome: Wife yelled at me and kids thought I had a demon. Please help, I use this computer in the office to connect to a 65" TV and I NEED my HDMI port.

Yeah, lot's of people on this forum have stated they have the same issue. It's not just people with Intel/AMD switchable cards either. I have an AMD 8650G + 8670M dual grapgics card and I am having the same issue.

Beats Audio Control Panel software not working after Windows 10 upgrade.

Beats Audio Control Panel software not working after Windows 10 upgrade. the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device? IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?

Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver. I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update. After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.

Internal speakers not working after upgrading to Maverics

internal speakers not working after upgrading to Maverics

There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. If you've installed a software equalizer called "Boom" or anything similar, update or delete it and restart.
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Reinstall OS X after backing up all data.
14. Make a "Genius" appointment at an Apple Store.

File- Export not working after upgrade from 11i to R12

Hi,
File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
Thanks and Regards,
Jagadeesha

Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 196613
In Argument 1 - Type: Number Value: 54
Out Argument 0 - Type: String Value: 12
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_MENU_ITEM Built-in:
In Argument 0 - Type: String Value: FILE.EXPORT
Out Argument 0 - Type: Integer Value: 19
Executing GET_MENU_ITEM_PROPERTY Built-in:
In Argument 0 - Type: Integer Value: 19
In Argument 1 - Type: Number Value: 79
Out Argument 0 - Type: String Value: TRUE
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.OUT
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.OUT
Out Argument 0 - Type: String Value: N
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing GET_APPLICATION_PROPERTY Built-in:
In Argument 0 - Type: Number Value: 75
Out Argument 0 - Type: String Value: IHR40P
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
# 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
# 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

Audio Line-in Port not working after upgrading to Lion

Similar Messages

Maybe you are looking for