Audio line-out gives no sound on right channel

I've a MacBook with two external speakers connected through a reciever.
After a while my right speaker stopped working. I brought the reciever back to the store, but everything was fine.
After plugging the reciever to my iPod, everything was working fine.
I found out that my line out is correctly anymore. I think because of plugging and unplugging the jack to much.
I suppose I need te go te the nearest Apple store to fix this problem?
Or maybe an external sound card is an option?

Did you check your Balance setting? Goto Preferences-Sound-Output Tab and make sure the Balance slide bar is in the middle between Left & Right. Also, make sure that the speaker plug is plugged in all the way. -GDF

Similar Messages

Connecting to audio line out freezes QuickTime!

Today for the first time I tried plugging my Apple speakers into the line out socket of my new Mac Pro instead of the headphone socket, only to discover that this prevented any QuickTime files from playing. It also caused FCPX to freeze up. Has anyone else experienced this strange phenomenon?
This was after installing the latest Yosemite update, but I cannot say whether this made any difference as I did not try this socket previously.

The Mac Pro (Late 2013) has two distinct audio ports. Audio devices you connect to the port will appear in System Preferences > Sound > Output.
Audio out: The left audio port with a speaker icon is a 1/8" stereo minijack for audio line out. It can use analog audio and digital S/PDIF fibre optic cables. Note that this port does not support headsets or microphones.
Headphone port: The right audio port with a headset icon is a 1/8" stereo minijack for headphones. When you plug in headphones to this port, sound is redirected from the internal speakers to the headphones. If the headset contains a microphone, it will appear in System Preferences > Sound > Input.
As with handling audio processing errors on a per-application basis, you can try toggling some audio format and input/output device settings in the Sound panel of System Preferences, or using the Audio MIDI Setup utility that is in your Applications > Utilities folder.
If this does not work, then you may need to reset the audio daemon, which can be done by rebooting your system; however, this may not be desired if you are in the middle of a workflow and would prefer to keep your system operating. In these cases, you can manually reset the audio daemon, by simply forcing it to quit. This can be done by opening the Terminal utility and running the following command: sudo killall coreaudiod

Faulty audio line out

The audio line out on my G5 dual-core has stopped working. There is a tiny amount of output, but not enough to drive the speakers. The headphone jack in front works. Does this mean the sound card is bad? The machine is less than one year old - should I take it somewhere to be repaired? Does the sound from the headphone jack come from the same sound card?

Yes, I am using powered speakers.

Premiere Pro CC & New Mac Pro - Audio Line Out Issue

I'm having a few issues with the audio line out on the new Mac Pro. For some reason, Line Out locks into Premiere Pro. When I switch programs, the audio line out device stays locked to Premiere Pro and the only way to get other programs to be able to output audio when Premiere Pro is not current application, is to go into System Preferences > Sound and click onto an alternative output and then click back onto Line Out.
Thanks,
Jon

Thanks.

Enabling same Line out on my sound card (XFI Music)

3Enabling same Line out on my sound card (XFI Music) Hello all,
This must be possible! My main problem here is that I cannot find anyway to clone my main output, let me explain.
I have my digital piano plugged into Line in
I have my headphones plugged into the first Line out (these work fine)
I have my TV (plugged in via 3.5mm jack) plugged into line out 2 (the one next to the green one)
My TV is setup as a second monitor so I can watch films etc. All I want to do is get what I hear in my headphones on the television at the same time. I don't want to have to plug my TV into the green lineout everytime I want to use it.
While we're on the subject, is there anyway I can remap the inputs, at the moment if I wanted to plug in my digital piano and a mic at the same time I can't. The irony is I upgraded from my absolute rubbish Realtek AC97 onboard audio device which could do all of the above. Surely this is possible?
Any help would be appreciated.
Regards,
Trinitrotoluene

Try resetting the PRAM. Info here:
http://docs.info.apple.com/article.html?artnum=2238

My external audio recording device only records to the right channel. How do I send the sound in the right channel thru the left one in Final Cut to get a full stereo sound?

My external audio recording device only records to the right channel. How do I duplicate the sound in the right channel and run it to the left one in Final Cut to get full stereo sound?
I've already copied and pasted the right channel (A2) onto the left channel (A1) but that just doubled the volume on the right channel.
For instance, when I listen to my audio with headphones it only comes thru the right one. How do I make it so that it comes thru both headphones?

Stereo is something else. It is a sound field where the individual elements are located through varying the amount of electrical energy for each element delivered to each channel.
What you have is a mono source that should be panned to center. This will equally divide the signal so it will be delivered out both the L & R channels.
Load the original clip to the VIEWER and set the PAN to 0 (zero). Delete any duplicates. They are unnecessary.
x

Problems with audio line out jack

When I connect the headphones in the audio line out inmediately change to "Digital out" and I don´t listen nothing, but when the headphones is unplugged I hear the music through the internal speakers normally. What can I do about? Thanks.

I need to change the logic board? or only the audio line out jack can be replace?

Possible to use audio line out and in simultaneously ?

In the current version of MacBook Pro Retina is it possible to use the analog audio line out and line in both simultaneously ? That is playback as well as record analog audio at the same time.
Does anyone know what is the audio hardward platform (Codec, DAC, ADC, etc..) in this machine ?
Thanks!

Air has a headset jack.
You can use a splitter
Mics should be USB capable for best results, almost all headset mics are junk quality.
then monitoring or listening thru the headphones
consider using a PRO MIC , such as an Audio Technica AT2020 USB
http://www.amazon.com/Audio-Technica-AT2020-USB-Condenser-Microphone/dp/B001AS6O YC/ref=sr_1_1?ie=UTF8&qid=1390776580&sr=8-1&keywords=at2020+usb
or better still use one of these with pro XLR mics:
http://www.amazon.com/Focusrite-2i2-USB-Recording-Interface/dp/B005OZE9SA/ref=sr _1_1?ie=UTF8&qid=1390776526&sr=8-1&keywords=2i2

Audio line out

my subwoofer dell was working on my mac, but I moved it from the room to the family room and my Dell speaker and subwoofer stoped working ,,, wonder how I can test the audio line out on the mac, or if you have any ideas
thank u

Are you sure you have everything connected properly? Are you sure that your audio designation in System Preferences is set correctly?
Describe in detail how you connect your speaker system to your iMac.

Audio line out disables periodically

Running Yosemite 1010.
Late 2013 MacPro
Audio switches from external speakers to internal speakers. Restart returns connection to external speakers.
No change is made to Audio Line Out port.
Please advise.

What speakers do you have... USB or Line ?

Audio line out buzz, clicks and ground hum all of the sudden?

I've developed a nasty, sharp, buzzing from my audio line-out on my iMac G5, and it's gets twice as loud and unbearable when I put the computer to sleep. When I plug in a pair of iPod headphones and play a song, NO AUDIO WHATSOEVER appears in the phones, just a steady endless series of audible clicks. All connections were tested with new cables, etc., and it didn't make a lick of difference. My guess is that this issue has something ot do with the "optical out" dual-purpose jack 3.5mm jack, like it's internal switch is stuck half-on or something-- I saw a red light when plugging in the audio cable. Has anyone experienced a problem like this on their machine?

I've read about the red light here before. The jack does indeed read the impedence and then ping software to let it know something's attached. Perhaps try several different plugs in addition to the cables you've already tried. I know some speakers and headphones here at my place have WAY different impedence values.
Some people have been able to trouble shoot by creating a dummy user account to verify it's a software problem (the problem is gone in the new account). Other people have been successful resetting the core audio by running the GarageBand program. Not sure these tricks will help you, as 60 cycle hum leads me to think there's a hardware problem.
Let us know if this is helpful (as I only need 5 more points to hit 1000!)
Ed

Audio line out port (Apple iPad Dock Connector) not working Iphone 4 os 4.2

For my new iphone4, the audio line out port (Apple iPad Dock Connector)is not working. Both using a cable to mini jack (3,5 mm) or in dockingstation.
I'm using OS 4.2.
IS this a bug?
Thanks
Hans

I just came back from the Apple store. My iPhone4 DOES have a working line out when plugged into a Apple name brand dock connector. I don't know why my SendStation refuses to work only with the iPhone4 yet works with iPods, etc..
Solution? I'm buying an Apple iPod dock connector for home and will try to find something with line out for the car - Apple says they do not make one.

Audio Line Out Stuck in Optical Mode Toothpick Technique

My macbook's audio line out is stuck in optical out mode. (red light and everything) Many have had this problem and many have fixed it with a toothpick. I want to know how this is done. People just keep saying that they fixed it without explaining what exactly they do with the toothpick. (I'm looking for incredibly specific instructions) Any help would be great!

Not much to say, fixing problems while the warranty is still good seems like common sense ...

Audio line-out issues

Audio line out not working. Had done up till updated Snow Leopard recently. Anybody had same problem? Any fixes?!

Problem "solved". Uncertain about why though.
Disc Repair? The verify disc did show up that it needed repairing.
Resetting PRAM?
Or the speaker cables ? I put in another cable of the same type but both cables now working fine. So...?
It may be simply how the steps are sequenced.
But a nuisance when it happens.
All part of the rich fabric of Life, The Universe and Everything? Possibly.
Thanks to iCare and X423424X

Damaged Audio line out jack

Hope to get some advice here - after messing with my MDD to get a Time Capsule up and running (while changing the ethernet connections a couple of times), I managed to thwack the audio line out cord from the box enough to damage it - I noticed one channel of the audio was gone, then after finding the jack is loose, wiggled it just enough to make it worse or better depending where the cord sits... I am using powered speakers so the apple speaker mini-jack doesn't seem to be a good option instead of the line out...
The question is, can this be repaired without replacing the logic board?
Many thanks in advance!
David

Hi, David -
Repairing that component could be not inexpensive (if done by a tech shop) or risky (if done by someone else).
As an alternative, you could consider using the Griffin iMic Adapter.

Audio line-out gives no sound on right channel

Similar Messages

Maybe you are looking for