Audio lost when importing MPEGs into Final Cut Pro

When I import MPEG files into Final Cut Pro 4.5 the audio disappears. When I play the clips in Quicktime the audio and video are present, after I import only the video is present. I have tried adjusting the sequence presets for MPEG, but that has not helped. Any advice? Thanks!!

Hi:
Check this thread:
http://discussions.apple.com/thread.jspa?messageID=4859045#4859045
  Alberto

Similar Messages

  • I am having problems importing files into final cut pro x

    I have tried several time importing files into final cut pro x but it keep say file not writable what should i do?

    WWhat exactly are you importing? From where? What version of the software are you using? Where are you trying to import the media to?

  • Importing SWF into Final Cut Pro with no Background

    Hi Everyone:
    I've created an animated macromedia .swf file and imported
    into Final Cut Pro successfully just as an .swf file. I can see the
    .swf file animate in Final Cut Pro, the only problem is there is a
    white background along with my animation. I've seen many slighly
    related threads to this problem, but no end solution or work
    around. any help? here's what i've seen in posts and other forums:
    - create another layer below your object and place a
    tranparent color swatch box the size of your stage size
    - export the flash file as .mov with an alpha channel
    transparency
    - export the flash file as a .mov with an alpha channel, then
    open in quicktime pro, then re export again as a quicktime movie
    with the "Millions +" option.
    - i've also heard something about having the right codecs, or
    purchasing some other 3rd part software.
    none of these approaches have worked for me. My Dream would
    be to just import the .swf file straight into Final Cut Pro. I've
    been exporting my flash movies as a png sequence and importing
    every image into FCP for the time being. I'm also thinking about
    just making the background bright green, because i think i just
    chroma key it out, but i'm not sure how clean this will be.
    here's the related thread:
    http://www.kirupa.com/forum/showthread.php?t=242444
    Thanks for any help.

    You need one of these: http://desktop.thomsongrassvalley.com/products/videoconversion.php to do it properly. The ADVC 300 is the best option for the money.

  • No sound on clips when importing video in Final Cut Pro X

    I recently got a new Mac Pro tower and installed Final Cut Pro X in it. I have imported 4K media into my library and since the footage was located in the same drive, I left the files in place and created proxy media to make the editing easier and faster. But every time I try to do a batch import, the video files appear to have no audio...the audio is missing within Final Cut Pro X.
    Yet, when I look into the library files (in the finder, not through Final Cut) and find the transcoded proxy files, they do have audio.
    I have had to delete the files from Final Cut, then re-imported them either one at a time or in batches of no more than five shots a a time. Very cumbersom and a waste of time.
    Is there a fix for this?

    Hi Russ. The video and audio were originally recorded with a Sony NEX FS700 R camera with its 4K Raw being transcoded to 4K Apple ProRes HQ by an Odyssey 7Q recorder.

  • Permissions problem when importing file in Final Cut Pro X 10.1.3

    Hi guys!!
    Today, like all days, I opened up my Final Cut Pro X version 10.1.3 and created a new Library and new project. Then I selected "Import Files" and I checked all the files I needed. Last I clicked on import selected files and I received this error:
    "Directory Not Writable. The chosen directory is not writable."
    This is a real tragedy. I have to start an important project and I can't use the program at all.
    This is what I tried so far:
    - Checked Macintosh HD permissions - Done - No problems
    - I use an external HD as my scratch disk - Checked - No problems
    - Tried to create a new project on a new HDD - Same error
    - Checked Read / Write permissions on Macintosh HD and on footage folders - No problems
    This is my Mac:
    - iMac 21,5" Mid 2011
    - Core i5 2,7 GHz
    - 16 GB 1333 MHz DDR3
    - AMD Radeon HD 6770M 512 MB
    - HDD 1TB
    - 2nd External HDD WD My Book 3 TB USB 3.0
    - OS Yosemite 10.10
    I'm in panic. And I really don't know how to resolve this problem....
    Thanks for every little help you will give me.
    David

    And you're using managed media?
    Did you repair permissions for the drive?
    What OS are you using? Did you update to Yosemite? Did you do a clean install?
    "drwxr-xr-x@ 10 aaron  staff    340 Oct 28 19:51 project_local.fcpbundle"
    Where are you reading this string?

  • How to Import a MPEG-3-ts (Transport Stream) into Final Cut Pro ?

    Hello All;
    I just bought Final Cut Studio and I am trying to figure out how to import some video footage that I captured using ArcSoft's totalMedia software via a HD HomeRun High Definition TV decoder. I have verified that the video is being saved in MPEG-2 Transport Stream format but I've tried everything but still can't import it into Final Cut Pro. I've purchased the MPEG 2 Quicktime component but then realized that it doesn't work with Transport Streams. Then I downloaded MPEG StreamClip for Mac which does play the clips on a Mac but I need to obtain the codec so I can import them into Final Cut Pro. Any ideas would be hugely appreciated. Thanks. Tim

    I do:
    "You need to use MPEG Streamclip to convert the files to an editable format, such as those found in Final Cut Pro's Easy Setup menu.
    For HD, your best choice is ProRes, DVCPro HD or Apple Intermediate Codec."
    And so does Nick.

  • How can I get MPEG-2 video into Final Cut Pro X?

    Hello!  I have several MPEG-2 video files on which I need to perform some edits.  When I tried to import them into Final Cut Pro, I learned that Final Cut Pro can't import MPEG files.  Okay, so I went into QuickTime and exported one as 720p.  20 minutes later, I had a video that I could load in FCP.  Awesome.  Except that when I watched the video, the audio was waaaaaaaay out of sync.  So, is there a different way I could get this MPEG-2 video into a format that FCP will like while keeping video and audio together? 
    I would keep trying a few different things without direction, but these videos are like 90 minutes long and the conversion process is lengthy.
    Thanks!

    Although I looked up the equipment, I couldn't find what kind of MPEG2. I'm assuming program stream.
    I don't know why you had the sync problem with QT. You could bring it into FCP and detach the audio and manually line it up it's off by a constant amount.
    Or you can use MEG Streamclip. You will also need the playback component, which is $20. Follow the instructions on the Squared 5 site to install it. Streamclip is worth having even if you don't use it this time around.
    Good luck.
    Russ

  • How to import unix executable files into Final Cut Pro

    A friend wanted me to create a Halo 3 Montage Video for him. He loaded the saved clips onto a flash drive for me but when I put it into my computer the information comes up as Unix Executable Files and I don't know how to import them into Final Cut Pro 7.0.2 or if it's even possible. Any help would be much appreciated. Thanks.

    Ok. Well, I plug in the flash drive. When it opens there's a folder that says XBox360. When I click on the folder there are 9 files listed that say Data0000, Data0001 etc. The preview option shows a gray folder that says Exec on it and the only information I can find is that it's a Unix Executable File. When I click on more info option everything that pops up is what I've already told you. I tried opening it in the VLC Player but nothing played which makes me think there aren't video files on the flash drive. When I click on the file to open it the Terminal Program appears and lists basic information about the file.
    Is there a program that can take these files and covert them into something that can run in Final Cut Pro? Or is that what VLC is supposed to do?

  • How can I import my xdcam files (Sony PMW200) into final cut pro

    Hi.
    I just got a Sony PMW200 but cannot figure how to import files into Final Cut Pro 6. I copied the SXS cards to my hard drive and am trying to figure out how to import it into Final Cut.
    I would really appreciate a little help.
    Thank you very much in advance.
    Brian

    Hi:
    If you own the material rights, you can use MPEG Streamclip to reencode to an editable format like DV.
    Hope that helps !
      Alberto

  • How do you import raw motion video projects into Final Cut Pro X

    How can I take a raw motion video (not a template for a transition, generator, etc.) and import it into final cut pro so I can just put it right into one of my projects.

    share, Export Movie, short cut ⌘-E
    in FinalCut: Import File

  • How Do I Import Photo to Movie into Final Cut Pro?

    Hi all - I just bought Photo to Movie for Mac and am attempting to import it into Final Cut Pro (which it says can be done). Anyone familiar with this? thanks for any help

    Maybe you should try the FCP forum, this one is FCExpress.
    Al

  • Importing issues with Final Cut Pro X. Green flash and twitches while play back

    Hello, I'm having some importing issues with Final Cut Pro X and I can't find any solution whatsoever. Perhaps my importing settings are wrong?
    Anyways, I've done a lot of recordings on eye TV and HD PVR with some videos that are about 3 hours long. I exported them into H.264 files, which turns them into mpeg-4 files with AAC audio. Then I import them into final cut pro X and I notice it takes a long time for them to render the videos and I notice that there are some green screens and twitches while I play through the video.
    Here is a screenshot of the green screen that I'm talking about:
    [URL=http://imageshack.us/photo/my-images/688/screenshot20130409at338.png/][IMG]http://img688.imageshack.us/img688/4537/screenshot20130409at338.png[/IMG][/URL]
    Could it be my 2 video graphics card that is causing this kind of issues? Or is there any solution to fix this?
    In the past, I've used iMovie 09 and it worked out perfectly. However, the new iMovie 11 is terrible because it automatically optimzie my 3 hour long videos into making the importing process to (144 hours long to import). Is there any way to get iMovie 09 back or am I stuck on dealing with this Final Cut Pro X issues?
    More information:
    My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
    My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
    I export the video as a quicktime movie. The export setting is H.262.
    The summary of the export is:
    File type: Quicktime movie
    Estimated size: 397GB
    H.264, Width and height: 1280 x 720. Framte rate: 30 fps

    My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
    My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
    I export the video as a quicktime movie. The export setting is H.262.
    The summary of the export is:
    File type: Quicktime movie
    Estimated size: 397GB
    H.264, Width and height: 1280 x 720. Framte rate: 30 fps

  • I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    at the end, you say "import preferences", which program are you describing?
    So im safer using footage that is remotely being pulled from iphoto...
    vs
    using footage that is imported into FCP from imovie?
    Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
    All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

  • I can't upload or import videos from my iphoto library, into final cut pro x.  When i click, IMPORT MEDIA in FCP, It lists iPhoto Library as GRAY, and will not let me access it.  I need the videos out of there.  I have tried every way I can think of.

    Like the title says...
    I can't upload or import videos from my iphoto library, into final cut pro x.  When i click, IMPORT MEDIA in FCP, It lists 'iPhoto Library' as GRAY, and will not let me select it.  I need the videos out of there.  I have tried every way I can think of.
    I have also tried from the iphoto side, to export the videos or share them to final cut.  I have had no luck.
    I have tried to drag and drop indidual video clips from iphoto to fcp, and the programs simply do not respond to each other
    I can see in the OLDER version of final cut pro x, where it has IMPORT FILES as an option, it was possible.  I see this on forums and youtube videos of the older versions.
    However, the newer version that i have, does not have IMPORT 'FILES' as an option, it is simply all lumped together as IMPORT 'MEDIA'
    Thank You for the Help

    at the end, you say "import preferences", which program are you describing?
    So im safer using footage that is remotely being pulled from iphoto...
    vs
    using footage that is imported into FCP from imovie?
    Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
    All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

  • Video quality changes when imported into Final Cut Pro

    I have video files that I have imported from an external hard drive that were transferred from an HD camera. When viewing the footage directly from the hard drive, the quality is great. Once imported into Final Cut Pro, however, there are small "flares" (don't know how else to describe them) that appear for split seconds across the screen. The best way to describe it is if you are watching a television that has an antenna, there will be static or interferance on the image. This is barely noticable but I can't determine what would cause the decline in quality. My video settings are set to DV NTSC 48 kHz and wonder if this is the problem or if anyone knows of something else that I should change prior to importing.

    Thank you so much for your help! I am technically challenged and STRUGGLING to say the least.
    Some files are definitely H.264 and I can convert them to ProRes. I also have clips that are
    DVCPRO HD 1080p25, 1,440 x 1,080 (1,888 x 1,062)
    Linear PCM, 16 bit big-endian signed integer, 2 channels, 48000 Hz
    Current Size: 1,440 × 810 pixels
    Will I need to do anything to those as well?
    Here is the question I'm afraid to ask because I think I know the answer already. Can I simply replace the clips in my sequence with the newly compressed ProRes files or do I have to change all of the video and sequence settings and then start all over?

Maybe you are looking for