Audio Manager will not save tracks

Hi
I am using PC Suite 6.70.22 with Windows XP SP1.
PC is PIII 660MhZ with 168Mb RAM.
Have set up connection to Nokia 6131 and is working fine. However when I tried to save tracks in Audio Manager (either to hard disk or to phone directly) I get one of the following outcomes:
Usually the first time I attempt, I get the "reading-pending" message, but the process doesn't move past that, no matter how long I wait. At other times, it reads 1 to 4% of the track before cancelling itself.
I am able to save tracks in WMP and other Media Players such as QE Player. Can anyone help?!!!
Thanks,
baba

Hi Manta
Thanks,
I already read this thread and tried converting to M4A instead of AAC format but when I try to convert to M4A Music Manager just shuts down.
This is my daughter's new phone and she has a couple of MP3s on her memory card for which the track titles read OK in MUsic Player. Apparently a friend sent them to her and she transferred them from the phone's memory to the memory card.
I tried copying MP3s to her phone , but still the same issue: Chinese characters and rectangles (actually I read Chinese and these are not meaningful titles - just random characters).
Before we started trying different means of getting the tracks onto her memory card, she used to be able to play the AAC tracks in music player, even though she couldn't read their titles. Now they won't play at all. The only way they will play is by going to Gallery, then Memory Card etc However this method does not appear to allow continuous play.
Any more ideas?

Similar Messages

  • One of my audio books will not play.  My music plays.  And my other audio book plays.  When I try a listen "the singularity is near", It does nothing.  I try and move he cursor to the middle of the track and hit play, but it moves back to the beginning.

    One of my audio books will not play.  My music plays.  And my other audio book plays.  When I try a listen "the singularity is near", It does nothing.  I try and move he cursor to the middle of the track and hit play, but it moves back to the beginning, and still does play.  How do you report a problem with a mandatory apple app?

    Audiobooks purchased from Audible.com.  They play on iTunes on my computer.  They have been playing on my iPod Classic until two days ago.  I'm in the middle of two books and now one does not keep track of where I am and the other does not play.  I also have other books not playing on the iPod that use to play.  They all play on iTunes on my computer.

  • In iOS 4, you could make separate photo slide shows with separate songs.   In iOS 5, this has changed. Now only 1 song is allowed at a time. It will not save separate song selections for each slide show.  Is there any way to fix this? This is something I

    In iOS 4, you could make separate photo slide shows with separate songs.
    In iOS 5, this has changed. Now only 1 song is allowed at a time. It will not save separate song selections for each slide show.
    Is there any way to fix this? This is something I use every day.
    I am on an iPad 2, 32gb, wifi...
    Thank you

    My Photos app works the same on iOS 5 as it did on iOS 4 i.e. I can have a different track for each album. When I select a track for a photo album I then start the slideshow so that it shows the first couple of photos with the track playing - I'm not sure it's necessary to start the slideshow but I always do and it remembers that track for that album.

  • Hello, I have a series of language cd's that I am trying to put onto my iTunes but when I download them, they will not save separately instead they are saving as the first disk so i am ending up with 3 disks on 1. Please help

    Hello, I am trying to copy a series of language cd's onto iTunes but each cd will not save separately, instead it is saving all as one disk. So I am ending up with 3 disks on 1 with 3 different track1, 2 etc. Please help as I am sure there is an easy solution to this that I have no clue about. Thanks

    After you insert the CD but before you import it into iTunes, select all tracks and set the disc number to 1, 2, 3 ... as appropriate.

  • Photoshop CS will not "save" or "save as" my canon 5d jpegs

    CS works fine for me. No need to upgrade. But it does not like my jpeg files from a Canon 5d. The program just freezes when I try to save or save as.
    I've looked at the file permissions and preferences. Can't see anything, but who knows? Any advice gratefully received. Tried renaming file, tried converting to TIFF but no luck so far. Argh!
    I'll attach a file if anyone wants to look at the settings.
    Best wishes, Patrick,

    Just replied in the PS forum. Yes reset all tolls works. File opens and Saves As - but on opening gives warning
    "embedded ICC profile cannot be used as is invalid. Ignoring."
    So somewhere - uploading from camera or loading into PS something sometimes goes wrong.
    So I'm not much wiser, but thanks for the fix anyway. Best, P.
    PS Was not a freeze as such, the main screen dims, and I regain control by clicking on a PS window on my second monitor. Did not check what Task Manager has to say - but will next time it goes wrong. Thanks.
    Date: Thu, 28 May 2009 22:18:44 -0600
    From: [email protected]
    To: [email protected]
    Subject: Photoshop CS will not "save" or "save as" my canon 5d jpegs
    When you save "freeze" do you mean that Windows Task Manager says it's "not responding" or is it crashing or what?
    Out of curisity, when you do this, what happens when you press ESC on the keyboard? If the program comes back, then it might just be showing up off the screen.
    You might just try resetting preference per this FAQ:
    http://forums.adobe.com/thread/375776
    >

  • After upgrade to Lion, iPhoto will not save events nor save albums after created.

    After upgrade to Lion, iPhoto will not save events nor save albums after created. Once iPhoto is shut down and re-launched, albums and events created no longer exist. How can this be fixed?
    Also, when attempting to create cards, iPhoto freezes.
    Message was edited by: askgabe

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • X-FI AUDIO CONSOLE WILL NOT LAUNCH

    have ran x-fi card fine for 3 months and after re-installing it after moving it for new graphics card the audio console will not launch ! I get the message device not on this computer even though its working fine i just cannot launch the console to adjust settings ! have checked no old drivers left, onboard sound is disabled and device manager says no probs with x-fi card . HELP ME !!!!!!!!!!

    Mine hasn't been resetting....so far. I know mines a Fatalty but sw wise it should be same for all the cards. The only thing I can think of is that it has something to do with option for syncing with control panel. I have that option unchecked in the creative mixer speakers tab. Maybe try disabling it if its currently enabled and see if that stops the resetting. No idea if it will help but thats the only thing I can think of, can't hurt to at least give it a shot.
    Hope it helps

  • CP will not save after Importing slides

    CP 2 is a flakey one, often requiring 10 times the amount of
    work to do the simplest of things. My project is two steps away
    from CP app-so it shouldn't be getting lost. But, after importing
    only 2 slides into my project it will not save. It just sits and
    spins until I have to crash it using Task Manager. The project is
    not corrupted-it just won't import slides.
    For $600 Adobe should be prepared to release something a
    little more stable than this. For all the problems of Camtasia
    plug-ins, I'm thinking it's still a less aggravating alternative to
    CP.
    Any ideas would be appreciated.
    JT

    You have to download the proper ipsw file again: http://www.ipswdownloader.com/
    And install it on your iPhone, using iTunes.

  • Said you open the Settings Manager will not install.

    Use Google Translate
    Said you open the Settings Manager will not install.
    설정 관리자가 열려있다면서 설치가 되지 않습니다.
    Let me know how the administrator set the end
    설정 관리자 종료법 좀 알려주세요
    In order to provide help as quickly as possible, please put the following information into your post:
        Your operating system & version
    Windows7 Ultimate K
    Service Pack1
    64bit
        Your web browser(s) & version
    IE10.0.9200.16635
    Firefox 22.0
        Your Flash Player version you having problems with
        Explain your problem in details; don't use meaningless words like "can't", "cannot", "unable", "won't work"
        If you get error messages, please quote them exactly, or provide a screenshot: http://forums.adobe.com/thread/1070933
    설치 프로그램에 주의가 필요합니다.
    Setup requires attention.
    Flasg Player 설정 관리자가 현재 열려 있습니다.
    Flasg Player Settings Manager is currently open.
    Flasg Player 설정 관리자를 닫고 다시 시도해 주십시오.
    Close Flasg Player Settings Manager and try again.

    Try the following:
    download both installers from http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header and save them to disk
    restart Windows
    now run both downloaded installers without doing anything else first

  • DRM Event Manager will not restart

    We reloaded the backup from last night into the DRM module to recover from issues within our hierarchy.
    Stopped service including IIS.
    Starting services, the MDM Event Manager will not restart. Seems to be throwing an error about a Unique Constraint violation in MDM N Tier Process Manager as well as a parameter incorrect.
    Any ideas?

    Hi,
    According to your description, my understanding is that you can’t shut down the file server by normal ways, and it hangs at the "shutting down" message for more than 60 minutes. Only way is to press the power button to force the shutdown.
    When Windows Server shuts down, messages are sent to the devices/system services/programs that are installed on the computer to notify them that Windows is preparing to shut down. The operating system waits for responses from programs that are running to
    make sure that the programs save unsaved data to the hard disk and shut down properly.
    Faulty or incompatible device drivers, programs, system services that either do not respond correctly or send busy request messages to the system are typical causes of shutdown problems
    You may use Task Manager to identify the cause of the shutdown behavior. For each program that is listed in Task Manager, manually quit the program, and then shut down and restart the computer to test if the shutdown problem is resolved.
    If the shutdown behavior occurs immediately after you make a change to the computer, undo any recent changes to the computer.
    Use safe mode to restart the server, and confirm that if the problem are caused by faulty drivers, programs, or services that start automatically.
    Best Regards,
    Eve Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Itunes 10.5 update will not save or update!

    Need help!
    My itunes 10.5 update will not save, and i need itunes 10.5 to update my phone HELP!

    Same here - I'm running 64-bit Windows 7 and have had the same problem since just before upgrading to 10.5 (64-bit) and now after too.  Same issue occured a couple months ago (I *think* last when iTunes updated), when I was directed by Apple support to close iTunes, clear all Apple process in Task Manager and try again which fixed everything (also tried suggested fixes of moving old backups, deleting the backup folder, etc).
    Seems like syncing\backups are breaking with every iTunes version upgrade (and only 64-bit Windows systems?)
    This is very frustrating to be left hanging right when big updates are available.

  • RVS4000 Firmware v2.0.0.3 will not save settings

    I have a RVS4000 that will not save any settings. Click on, for instance, Disable WAN requests. Click save and it goes back to Enable.
    If I create a VPN tunnel, click save, it clears all settings like I didn't type anything.
    What is going on?

    I recently purchased the RVS-4000 v2 and setup a single VPN tunnel.  Then I upgraded to the latest firmware v2.0.0.3.  Today, I attempted to add a second tunnel and none of the settings could be saved.  I found that this was not limited to the VPN settings, so the issue is more widespread; although, I was able to do deletions of tunnels, so this appears to be some sort of global-edit-save issue.
    My workaround for the moment was to go back 1 level in the firmware, which of course, is always dangerous with any brand or device.  I was not comfortable doing that, but it works for the moment.
    Looking at the security issues which v2.0.0.3 addressed, I (and other users) are at a severe disadvantage if we are forced to use firmware prior to v2.0.0.3, and if we do, then we lose edit-save, at the least for VPN, which is why I purchased this to begin with.
    So, I'll throw this out to Cisco - the first report of this issue was in August.  It is now almost December and there is NO FIX?  Cisco is supposed to be *the name* in networking devices.  What is going on there?  Was ANY Q/A done on this firmware?  Now that you know it's broken, why isn't it fixed?  I recognize that now you are looking to retire the 4000, but I for one can tell you that this is going to leave a bad feeling with this author if it is done without resolving the obvious issues.  I am very sure you have a firmware engineer who knows what happened here and has a fix.  So, why isn't it out here for end users?  Product manager  - where are you?

  • Muse 2014 will not save changes.

    Muse 2014 will not save changes. Just freezes when asked to save. Cannot do a save as either. However, can still work on file… but unable to save. Very frustrating losing work and wasting time! Any thoughts would be welcomed.

    Zak,
    Thank you for the speedy reply.  I have been having issues since Saturday. Works sometimes and then not. Restarting computer sometimes works… but a pain in the butt to do! Is starting to drive me crazy.
    Also when I try to quit Muse, well it stays open… sort of. Image is on screen, but not functional. Weird, to say the least.
    Attached is a files. I did open it earlier today and managed to do some work and save it. Now nothing after a few hours of work and thought was being saved as I did “command S” very frequently. It is very, very frustrating and brings me back some 25 years ago when crashes were expected and common. Today, not so much!  I am not a rookie and would like to know what the issues are asap… if possible.
    Many thanks for your help.
    Paul
    Paul D. Heaslip  BES, RGD
    Third Wave Creative | Cambridge, ON Canada
    studio: 519.260.2603 | mobile: 647.407.5067
    www.thirdwave2.ca

  • I-phone 4 camera roll will not save pictures sent to me via text messages, it just gives me a message stating it is updating my library, then takes me back to the camera roll where the picture is no where to be found (other than in my original text messag

    I-phone 4 camera roll will not save pictures sent to me via text messages, it just gives me a message stating it is updating my library, then takes me back to the camera roll where the picture is no where to be found (other than in my original text message).

    RESOLVED!!! I logged on to my Straight Talk online account, and did a Tech Chat. They immediately gave me a direct phone number and a Reference PIN number and asked me to contact their iPhone specialty support. I called (of course the gentleman's accent was very difficult for me to understand, but managed with asking continually for clarity). He walked me through several tests, setting changes and had me get on my wifi to obtain the latest APN settings. None of his efforts worked ad it was obviously NOT my Straight Talk iPhone 5, 64GB CDMA (no SIM) - it was something with their setting on their end on my account. I was placed on hold a few times and he would come back on to have me try to get on Safari and even Google... after the 3rd on-hold, he returned and asked me to try to use my data again without the wifi turned on and BINGO it worked... I still do not have my wifi turned on and I'm still receiving texts from YESTERDAY too while I was away from wifi service. IF you come across this issue - please call Straight Talk and/or log on to your Straight Talk online account and talk to an online customer service representative and get their direct line phone number for iPhone support and have your Reference PIN number available. Good Luck

  • Very Strange - Mixer Record Source Setting Will Not Save - defaults to Microphone volum

    This issue has me stumped.. I've even tried a clean boot of XP.
    Firstly, I am using X-Fi Platinum, on XP, ASUS board
    The problem is that both in Control Panel and in Creative Mixer, any changes made to the recording source will not save. In other words, when I close down the Mixer and re-open, the default source is Microphone with volume 0. Even if all I do is increase the microphone volume, when I close that window down, it becomes volume 0 again. When I try the approach through Control Panel it is the same result. The microphone is not "mute" but the volume slider is all the way down to minimum, so its the same result. Also, if I change the recording source to "What You Hear" or "Mic 2" , as soon as I close down the mixer window, it is back to Microphone volume 0
    The strange thing is, I formatted my hard dri've and re-installed XP, and still I'm having the same problem.
    Thanks in advance for your help..

    I finally discovered the problem. It is the BlueBeat player that was responsible.
    Here is an exerpt from a press release:
    "Bluebeat.com uses MRT?s X SeCure technology which makes it next to impossible for an average user to save, record, convert or otherwise ?transcode? the audio streams on the Bluebeat.com"
    But the problem is that it effects the OS at such a low level that doing a "clean boot" still does not fix the issue.
    Keep in mind, that the BlueBeat player wasn't even running when it caused these issues. Fortunately, when I uninstalled BlueBeat, everything works fine again.
    Moral of the story? If you have X-Fi, avoid BlueBeat.com, because you will lose all ability to record, even when not running their player. I hope this helps some people out there.

Maybe you are looking for