Audio Meters "peak indicator" gets stuck after prolonged use of Premiere Pro CC.

Does anyone else have this issue? After using Premiere for a while (maybe an hour or so straight) the audio meters peak indicator will not reset when you start/stop. What do I mean? If your audio level peaks or goes into the red, it stays there like it should letting you know that the levels had hit above +0db. This is normal. This is good. But usually when you stop the timeline and start again, that red peak indicator is reset and disappears. But for me, after prolonged use (which is say about an hour or so), the meters stop resetting and the red does not go away unless I click on the meter to make it disappear. It looks like this even after stopping/starting the timeline:
***Meters work fine for the first 30mins - hour or so of editing. Hitting stop and then start again resets the meters as it should.
***Eventually the peak indicator (see screenshot above) gets stuck and won't go away. The meters continue to work fine, but the red does not go away.
Only way to then reset it is by clicking on the meter itself. Restarting Premiere Pro CC will put everything back to normal again and it should work fine again...for a while...before its starts to lock up again. This issue was present in 7.0.0 as well as the newly updated 7.0.1 I'm on a 2011 27" iMac with 16gb of RAM. (I've submitted a bug report, but curious if this happens to others.)

Jim Simon wrote:
I'm wondering if it's just me.
Maybe it's just you who has that much clipping audio. Most of us tend to avoid that.
#Layers
As much as I wish all my audio were perfectly leveled at all times... You mix live weddings with DJ's that don't know their own equipment with layers of audio in post and its a recipe for some +0db audio.
In all seriousness, I do hope that if others see this bug, they'll chime in and that this bug gets fixed. It's annoying.

Similar Messages

E4200 - Gets hot after prolonged use

Pros: Nice looking. Can turn the back port lights off (but can't turn the glowing white Cisco light off).
Cons: Gets hot (to me) after prolonged use, so I have a side propped up on a coaster pending buying some padded feet for it. Web interface slower to load than expected.
Using with my Dell XPS M1530 with Intel 4965AGN wireless card. Foot away from my router I get about 12MB/sec (about 100mbps). Only saving grace is the range appears to be excellent in my 2000 sq ft townhouse. Router is in one corner 2nd-floor bedroom, and even at the furthest point away in my basement I get about 6 MB/s (about 50 Mbps).
Other Thoughts: Used to stream ISO rips of my legally purchased DVDs & Blu-Rays from my home server to my TVs. DVDs require about 1 MB/s to play without hiccups, which this does fine, but the blu-rays require 5-6 MB/s which this unit can do about 90% of the time. Maybe it's just my approximately 4-year old laptop wireless that can't handle the new speeds?

Did you try changing any settings like the wireless channel manually? Also, if you haven’t already done so, you could try a firmware update. Lots of the initial kinks are usually ironed out with a firmware update.

My iMac keeps on losing internet connection. Webpages get stuck after a minute or so. If I check the internet connection via diagnostics it seems to work just fine. Others, like the iPad use the same wifi connection and never fail. What can I do?

Running 10.6.8 on Intel dual core iMac, it keeps on losing internet connection. Webpages get stuck after a minute or so. If I check the internet connection via diagnostics it seems to work just fine. Others, like the iPad use the same wifi connection and never fail. What can I do?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Safari problem after prolonged use.

Right heres my current annoyance with my iPhone 3G, taken from my actual phone:
http://i35.tinypic.com/1zwlpv9.jpg
Browsing the web via Safari is usually a joy for the first 10 minutes or so continual use. I get no errors, no timeouts and speeds are near enough as quick as my 20mb cable connection whilst browsing on my MacBook.
However, after prolonged use of Safari, I start getting the above error almost every time I click on a link or try to change website. If I click on the link enough it will eventually load though. Not only that, as you can see from the screenshot above of Facebook, you can see Safari will change the font and the layout so it looks like the above. Images also wont load. Turning the phone off and rebooting seems to cure it.
I was hoping 2.0.1 and more recently 2.0.2 would fix this but its still there more than ever.
To combat the problem, I hard reset the phone, did a full restore to 2.0.2 and set up a new phone profile but still got the same problem after prolonged use.
Anyone have the same problem or even better, a solution? Im starting to think I have a fault with my iPhone.
Message was edited by: Nidaro

What happens when you try? Are you getting to the login page?
Try another browser as a test.
Firefox

Fix for crash in After Effects CS5 and Premiere Pro CS5 when Joesoft Hear audio enhancer installed

After Effects CS5 and Premiere Pro CS5 both can crash due to a conflict with the Joesoft Hear audio enhancer.
We've just gotten confirmation from Joesoft that they've released a beta version of Hear that doesn't conflict with After Effects CS5 and Premiere Pro CS5. We're recommending that our customers who also use Hear install the 1.0.5b2 (build 490) beta version of Hear.
Let us know on this forum thread whether this solution works for you. We on the After Effects and Premiere Pro teams will monitor this thread for feedback, and we'll make sure that the folks at Joesoft get the information that they need, too.
When reporting back, be sure to let us know whether you've installed the Premiere Pro CS5 (5.0.2) update and After Effects CS5 (10.0.1) update.

After 2 days trying to get AE and Premiere past the mediacore initialization message, I finally stumbled on this little message. Updating Hear definitely solves the problem!

Why my iPad get hot after 30min use?

Why my iPad get hot after 30min use?

The iPad should not get hot after 30 minutes of use. The new iPad will get warmer that the other two iPads did, but it should never get hot.
If you are playing a HD graphic intense game or watching a HD movie it will get warmer than it does when you are just surfing the web or doing basic functions in word processing apps, or writing emails a but it should still never get hot.
Is your iPad brand new or has this been going on for a while?

I'm using windows 8 and when I open premiere pro then it says i need application manager, so i get it and that says i need adobe support advisor but that is discontinued and now i cant use adobe premiere pro

I'm using windows 8 and when I open premiere pro then it says i need application manager, so i get it and that says i need adobe support advisor but that is discontinued and now i cant use adobe premiere pro. what do i do now?

Do a clean (re)install:
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can initially skip the step to create a new profile, that may not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

After Effects and Adobe Premiere Pro

I thought After Effects and Adobe Premiere Pro were part of the cloud. Neither appeared in the download manager and I'm not able to install.

This question gets asked a lot because, rather than putting a simple, clear explanatory note into the Application Manager, Adobe confusingly opted to simply omit apps not supported by your operating system from the download screen thereby leaving users such as yourself bewildered as to why those apps are not available for you for download.
Many people often think their Application Manager is somehow broken or corrupted.
I take it that you're running Windows XP 32 bit or Windows 7 32 bit?
Neither will run PP or AE unfortunately so those apps are not available for you to download.
64 bit operating systems only.

While editing metadata, "After a serious error, Premiere Pro will now exit."

Hello all,
So here I am, starting on a new project with Premiere Pro CS6.0.0 (319 (MC: 264587)). Using a slightly modified "metadata" workspace, I go on to editing info about all my 300 clips - scene, shot, description, remarks ...
And every now and then (sometimes right after I started, sometimes more than half an hour later, and sometimes anything in between) I get this unhelpful message that "After a serious error, Premiere Pro will now exit. The program will try to save your work" (I'm translating from French, so this might not be 100% accurate). I have not identified a particular action that causes that (i.e. editing a specific metadata field or whatever).
My clips are in a normal folder, nothing fishy here I don't think (except that the search bar is greyed out, which renders my metadata campaign fairly useless - will make another post about that). I am not using any plugin or patch (not knowingly at least). I run Mac OS 10.9.4 without known problems. I have 12 Go out of 621 free on my hard drive, 8 Go RAM, and AMD Radeon HD 6750M graphics card with 1024 Mo VRAM as well as an Intel HD Graphics 3000 with 512 Mo VRAM (chosen depending on energy needs vs. computation needs).
Any clues ? For example, can I find an error or activity log from Premiere Pro ? Thanks in advance.
Charles
EDIT : Here an error log, from the OS : Error log : Premiere Pro Crash - Pastebin.com
EDIT2 : looks like it's scrolling through the clips in my main bin that's the problem ... Is that even possible ?
EDIT3 : Definitely the scrolling.

Your error report indicates that Photoshop is not up to date. Choose Help>Updates... and update to 11.0.2
I'd also try restoring your prefs: http://adobe.ly/PS_Prefs

After Effects CS6 and Premiere Pro CS6 not available for installation for 32-bit systems

After Effects CS6 and Premiere Pro CS6 require a 64-bit operating system and processor to be installed and run.
If you subscribe to Creative Cloud but use a 32-bit computer system, you will not be able to download and install Premiere Pro CS6 or After Effects CS6.
This issue primarily affects users on the Windows operating system, since all supported versions of the Mac OSX operating system are able to run 64-bit applications.
See this document for details:
"64-bit Windows required for After Effects and Premiere Pro CS6"
In general, you can only download and use applications for which your computer system meets the minimum system requirements.
Premiere Pro system requirements
After Effects system requirements

Who's says that Microsoft can't debug?
I used msconfig, first disabling startup items, -same result.
Enabled all startup items, disabled all non-microsoft services - AE worked!
I re-enabled each service in turn until AE crashed.
The fault was related to an item for a video streaming device I have in my house. It was Monsoon-multimedia's Vulkano Service. Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen. It does load a couple of virtual devices in device manager, and uses a proprietary codec.
I uninstalled the vulkano streamer application and rebooted the external Vulkano device. I reinstalled the Vulkano and verified it connected to the device and could stream. Once it did, I tried AE again and IT WORKED!
I wonder if simply rebooting the Vulkano would have fixed it. Its like opening the garage door to turn on the refridgerator.
Thanks for the help!
Jim

Dynamic Link from After Effects CC to Premiere Pro CC Performance Issues

I just updated my After Effects and Premiere Pro to CC and since doing so I've found numerous performance issues. One that is seriously hurting my workflow is the poor performance of the dynamic link with After Effects compositions into Premiere Pro. In CS6, you could make a change to the AE composition, save it, click over to Premiere Pro and it would quickly update and you can play your timeline and preview your changes. You could also move the clips around and add cross dissolves and watch the changes quickly in Premiere Pro CS6. Now, since updating to CC, if you save the composition in AE and click over to Premiere Pro it won't update on its own. Sometimes it just shows a single frame of the AE composition. I found that if you right click and "Edit Original", go into AE and then click back over to Premiere Pro and it will finally update. But if you make any changes to the placement of the AE composition on the timeline, or add a cross dissolve, fade, etc. it again won't play the AE composition any longer. After you make any changes to the AE composition you have to right click and go to "Edit Original", go into AE, and then click back over to Premiere Pro.. Then it will finally update.
iMac
Quad Core 3.4GHz
32G RAM
OS X Mavericks

Thanks Kevin.
Unfortunately in my case the export doesn't solve the issue. The video only looks good while in the composition... I've tried exporting it in all the different formats with several codecs, but to no avail...
You can check my own post in the After Effects forum: AE linked composition looks different in Premiere

After Effects export as Premiere Pro project weird PAL/NTSC problem

This post is not a question. It's here, because I've found a solution and want to share with You.
I've noticed a strange problem during export from AE to PR.
Ok, here I go.
AE = After Effects CS3
PR = Premiere Pro CS3
My AE project is D1/DV PAL Widescreen. It is a sequence of slideshow with some video effects applied. I needed that sequence in PR. I was happy to find a new feature - export as premiere pro project (new for me - i am pretty rookie ;). Thaks to this feature I have saved most of my disk space that is always to low. But, like every first try, this one was not perfect too. I had two problems.
Problem no 1.
I opened exported project in PR and saw message like "video effect AE.CC COMPOSITE not present".
Whole composition was working perfectly except that one video effect that was fundamental for this project.
*Solution was as easy as it can be. I've just copied that effect from AE plugin folder to PR plugin folder. It worked for this.
Problem no 2
Like says AE Help "When you export an After Effects project as an Adobe Premiere Pro project, Adobe Premiere Pro uses the settings from the first composition in the After Effects project for all subsequent sequences."
Project settings in PR was exactly D1/DV PAL Widescreen. So where is the problem You ask?
Therefore why my Timeline works in NTSC 29,97 frame rate if all settings match PAL 25 frame rate?! I don't know.
*Solution to fix this annoying bug is to create a new project in PR with all settings for D1/DV PAL Widescreen in this case. Than just import that PR project exported from AE. Now timeline works like it should in PAL frame rate.
That's it.
I hope this post is helpful, because I didn't find any answer for this here in Adobe forum.
Adam

Who's says that Microsoft can't debug?
I used msconfig, first disabling startup items, -same result.
Enabled all startup items, disabled all non-microsoft services - AE worked!
I re-enabled each service in turn until AE crashed.
The fault was related to an item for a video streaming device I have in my house. It was Monsoon-multimedia's Vulkano Service. Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen. It does load a couple of virtual devices in device manager, and uses a proprietary codec.
I uninstalled the vulkano streamer application and rebooted the external Vulkano device. I reinstalled the Vulkano and verified it connected to the device and could stream. Once it did, I tried AE again and IT WORKED!
I wonder if simply rebooting the Vulkano would have fixed it. Its like opening the garage door to turn on the refridgerator.
Thanks for the help!
Jim

After not using my macbook pro for 10 days, my wireless mouse no longer works. (I had turned the computer off). I've gone in to mouse preferences but the computer won't recoginize the mouse. It worked fine before the trip. Batteries were changed.

After not using my macbook pro for 10 days, my wireless mouse no longer works. I had the computer turned off. I've changed the batteries, gone to universal preferences, mouse preferences but the computer won't recognize the mouse. Any suggestions?

Got it. Thanks. I deleted the mouse (not an apple, but a logitech which has worked fine for me) and then re-discovered it and it's working. Appreciate the advice.

Can Waves audio plug-ins be used with Premiere Pro CC?

Hi folks,
As it says in the thread title, can Waves audio plug-ins be used with Premiere Pro CC?
Cheers!

I dont think so:
http://www.adobe.com/products/premiere/extend.displayTab4.html
http://www.waves.com/support/tech-specs/supported-hosts

After Effects AND/OR Premiere Pro CS5 ?

Hi guys,
I am quite new, I have only done one videoproject and that was in Premiere Pro CS4. Now I got a new machine and have both Premiere Pro CS5 and After Effects. I have started learning AE from some videos and it is quite impressing what you can do there. So I hope I can use AE to improve my videos.
My question is, shall I do the project in PPCS5 and then connect to AE for making special effects on clips or shall I do the whole project in After Effects ?
If I choose AE for the project, will I miss some functions from Premiere Pro?
Many thanks in advance !
Sven

Thank you guys!
You put me on track, expecially with the link!
From beginning I am just taking care of old videos that noone look at because not edited so most of the time just crap.
I want to edit them, try to improve color and sharpness but also add some funny elements so they are more interesting to watch.
I have 30 videos from my daughter, each 1 hour and 8 of my own (really crap) and 8 VHS from a friend. That is just to start with.
Start Adobe Premiere Pro from within After Effects and capture footage for use in After Effects. (See Use Adobe Premiere Pro for capture (Production Premium and Master Collection only).)
Use Adobe Dynamic Link to work with After Effects compositions in Adobe Premiere Pro without first rendering them. A dynamically linked composition appears as a clip in Adobe Premiere Pro.
Use Adobe Dynamic Link to work with Adobe Premiere Pro sequences in After Effects without first rendering them. A dynamically linked sequence appears as a footage item in After Effects.
Start After Effects from within Premiere Pro and create a new composition with settings that match the settings of your Premiere Pro project.
Select a set of clips in Adobe Premiere Pro and convert them to a composition in After Effects. "
So with a testvideo I will start using these 5 different methods so I learn when to use which one!
And I also have 4-5 videolessons to watch.
Thanks again!
I probably be back soon with more questions!

Audio Meters "peak indicator" gets stuck after prolonged use of Premiere Pro CC.

Similar Messages

Maybe you are looking for