Audio-MIDI setup not opening? MIDI device not being seen?

Hello,
I have a big MIDI problem never seen before - just put a new drive into a G5 PPC Quad - I outfitted and loaded up this drive in a G5 dual machine before the Quad came, and everything ran smoothly - logic, MIDI, audio, etc. Now that the G5 Quad's here, that same drive stalls when opening the Audio-MIDI setup and never gets past "looking" for things. Similarly, if I try and open logic, it goes through all the steps until "checking for MIDI drivers" where it just hangs, never to open...I tried reinstalling via the custom install the Unitor drivers from the Logic CD - same problem.
The drive is 250GB SATA, installed OSX 10.4.10, Logic 7.2.3, latest proapps 4.0.1 and other software, hooked up via USB to a Unitor8, FF800 for audio, G5 Quad 2.5Ghz PPC.
Any help is much appreciated - we need this machine as our main sequencer!!
thanks-

Install the Midi driver first before switching on the Midi-Interface,
then after check for the latest up-date on the Driver,
Then Re-boot Machine, plug in Interface and good luck,
Check to see if the CABLE is plugged in properly.
Not sure if this is the same as what you've got,
see site below.
http://www.dontcrack.com/freeware/downloads.php/id/1712/software/Unitor-8-Contro l/
Fr.BlayZay.

Similar Messages

Errors verifying library (opening library: device not ready) (qlm connection)

OSB Version:     10.4.0.3.0
OS Version:          Oracle Enterprise Linux 5.8
Device:               SL3000
Vendor:               STK
Firmware:              4.00
ob> lsdev
library             sl3000           in service
drive 1           tape1            in service
drive 2           tape2            in service
drive 3           tape3            in service
ob> pingdev -a -v
Info: pinging library sl3000.
Info: library    sl3000           accessible.
Info: pinging drive tape1.
Info:   drive 1 tape1            accessible.
Info: pinging drive tape2.
Info:   drive 2 tape2            accessible.
Info: pinging drive tape3.
Info:   drive 3 tape3            accessible.
ob> vfylibs -a -v
collecting dte info...
   library sl3000 ...
   opening library: device not ready
verifying dte definitions against drive objects...
Summary of verify errors:
   library open errors:        1
Command     /usr/local/oracle/backup/.bin.linux86_64/obtool --gui -u 'admin' 'inventory' -L 'sl3000'
Status     Error: unable to open qlm connection - operation timed out
cat /usr/local/oracle/backup/admin/log/device/sl3000/obrobotd
2013/09/26.17:29:45 obrobotd version 10.4.0.3.0 (linuxamd64) -- Wed Jun 5 17:00:12 PDT 2013
Copyright (c) 1992, 2013, Oracle and/or its affiliates. All rights reserved. on <hostname> pid 8740
2013/09/26.17:29:45 on host <hostname>: /usr/local/oracle/backup/.etc.linux86_64/obrobotd sl3000
2013/09/26.17:29:45 listening for requests on port 34160, interfaces:
2013/09/26.17:29:45     eth0 (::ffff:***.***.***.***)
2013/09/26.17:29:45     bondib0 (::ffff:***.***.***.***)
2013/09/26.17:29:45 use_two_request_queues: 1
2013/09/26.17:29:45 process_requests_max_cnt: 17
2013/09/26.17:29:45 sl3000 reserved ok, cookie = 0xf0ad40c
2013/09/26.17:29:52 lm setup failed - device not ready (SCSI library)
2013/09/26.17:29:52 obrobotd exitting

How are your devices configured? Can you supply the output from "obtool lsdev -lvg" please.
Thanks
Rich

Could not open the device file /dev/nvidia0

and yet:
[root@mythfe01 dev]# ls -alh nvid*
crw-rw-rw- 1 root root 195, 0 Mar 26 16:06 nvidia0
crw-rw-rw- 1 root root 195, 255 Mar 26 16:06 nvidiactl
and:
[root@mythfe01 dev]# lsmod | grep nv
nvidia 4083280 0
agpgart 28872 1 nvidia
but:
NVIDIA: could not open the device file /dev/nvidia0 (Input/output error).
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(EE) NVIDIA(0): *** Aborting ***
I am using a homemade kernel, but i can't think of a reason why that would prevent things from working properly considering the module loaded ok.
Any thoughts?

Moo-Crumpus wrote:Do you use udev? Have a look if there is a ruleset for nvidia, I remember there was one. Afaik, nvidia should be owned by the video group - well, once it was, I am not up to date and have no arch machine with nvidia right now.
Could anyone specify how to do that? I have the exact same problem, although I use the default kernel that came with Arch.
NVIDIA: could not open the device file /dev/nvidia0 (Permission denied).
NVIDIA: Direct rendering failed; attempting indirect rendering.
[kristjans@myhost ~]$ cat /proc/driver/nvidia/cards/0
Model: GeForce 6200 TurboCache(TM)
IRQ: 22
Video BIOS: 05.44.02.52.00
Card Type: PCI-E
DMA Size: 39 bits
DMA Mask: 0x7fffffffff
[kristjans@myhost dev]$ ls -alh nvid*
crw-rw---- 1 root 27 195, 0 2007-10-06 19:10 nvidia0
crw-rw-rw- 1 root 27 195, 255 2007-10-06 19:10 nvidiactl
[kristjans@myhost dev]$ lsmod | grep nv
nvidia 6829684 40
i2c_core 20352 2 nvidia,i2c_piix4
agpgart 27224 2 nvidia,ati_agp
Last edited by KSiimson (2007-10-11 04:23:18)

Problem description: mac mail not opening, software updates not working, app store not opening. imac osx 10.9.5

Problem description:
mac mail not opening, software updates not working, app store not opening. 10.9.5
EtreCheck version: 2.0.11 (98)
Report generated 1 December 2014 16:51:49 CET
Hardware Information: ℹ️
iMac (21.5-inch, Late 2009) (Verified)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
12 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
BANK 1/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1920 x 1080
BenQ GL2240 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 1:32:17
Disk Information: ℹ️
WDC WD5000AAKS-40V2B0 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (164.03 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GA11N
USB Information: ℹ️
EPSON EPSON Epson Stylus S22 Series
Canon MX410 series
ASMedia AS2105 1 TB
S.M.A.R.T. Status: Verified
EFI (disk3s1) <not mounted> : 210 MB
Backup (disk3s2) /Volumes/Backup : 999.86 GB (506.24 GB free)
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader 7.95 GB
S.M.A.R.T. Status: Verified
EOS_DIGITAL (disk1s1) /Volumes/EOS_DIGITAL : 7.94 GB (7.83 GB free)
Western Digital My Book 1140 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
2TB (disk2s2) /Volumes/2TB : 2.00 TB (1.50 TB free)
Wacom Co.,Ltd. CTE-450
Contour Design ShuttlePRO v2
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (9.0 24217.979618) Support
[not loaded] com.parallels.kext.hypervisor (9.0 24217.979618) Support
[not loaded] com.parallels.kext.netbridge (9.0 24217.979618) Support
[not loaded] com.parallels.kext.usbconnect (9.0 24217.979618) Support
[not loaded] com.parallels.kext.vnic (9.0 24217.979618) Support
/Applications/Toast 10 Titanium/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4052 - SDK 10.8) Support
[not loaded] xxx.qnation.PeerGuardian (1.1.9) Support
/System/Library/Extensions
[not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) Support
[not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ℹ️
ParallelsDesktopTransporter: Path: /Library/StartupItems/ParallelsDesktopTransporter
WkSvMacX: Path: /Library/StartupItems/WkSvMacX
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist Support
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS4ServiceManager.plist Support
[running] com.epson.epw.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist Support
[failed] com.adobe.fpsaud.plist Support
[loaded] com.adobe.versioncueCS4.plist Support
[loaded] com.barebones.textwrangler.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[not loaded] com.gopro.stereomodestatus.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[invalid?] com.tvmobili.tvmobilisvcd.plist Support
[loaded] fi.polar.libpolar.plist Support
[running] fi.polar.polard.plist Support
[failed] xxx.qnation.PeerGuardian.kextload.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.macpaw.CleanMyMac.helperTool.plist Support
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[running] com.macpaw.CleanMyMac.volumeWatcher.plist Support
[invalid?] com.plexapp.helper.plist Support
[not loaded] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
SmartDaemon Application (/Library/Application Support/CleverFiles/SmartDaemon.app)
SilverKeeper Scheduler ApplicationHidden (/Applications/SilverKeeper.app/Contents/Resources/SilverKeeper Scheduler.app)
Dropbox Application (/Applications/Dropbox.app)
Garmin ANT Agent UNKNOWN (missing value)
Internet Plug-ins: ℹ️
DirectorShockwave: Version: 11.5.7r609 Support
Google Earth Web Plug-in: Version: 6.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
PandoWebInst: Version: 1.0 Support
AdobePDFViewerNPAPI: Version: 10.1.12 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.0 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.239
iPhotoPhotocast: Version: 7.0 - SDK 10.8
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.0.0 Support
AdobePDFViewer: Version: 10.1.12 Support
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User Internet Plug-ins: ℹ️
fbplugin_1_0_3: Version: (null) Support
Safari Extensions: ℹ️
Open in Internet Explorer
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS4 Support
DivX Support
Flash Player Support
Flip4Mac WMV Support
GoPro Support
Growl Support
Java Support
MacFUSE Support
MenuMeters Support
Perian Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: NO - Auto backup turned off
Destinations:
Back Up [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
      12% Google Chrome
      12% WindowServer
      4% Dock
      2% Little Snitch Agent
      2% SystemUIServer
Top Processes by Memory: ℹ️
399 MB iTunes
322 MB mds_stores
216 MB Google Chrome Helper
193 MB Google Chrome
155 MB com.apple.IconServicesAgent
Virtual Memory Information: ℹ️
6.64 GB Free RAM
3.51 GB Active RAM
1.36 GB Inactive RAM
1.11 GB Wired RAM
1.91 GB Page-ins
0 B Page-outs

[not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
Un-install according to the developer's un-install instructions.
You do not need to use cleaning programs. They can destroy your computer operation as they may already have done.
CleanMyMac - Uninstall
CleanMyMac2 Un-install
After un-installing, run this program to make sure you got all the pieces.
EasyFind – Spotlight Replacement
Do a backup.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.appstore.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

Firefox is not opening and is NOT present in task manager

With no apparent reason FF is not opening and is not present in Win Task Manager. I tried to reinstal, reset registry and other common solutions but none of them changed anything. After doubleclick on an icon nothing happens... and thats all.

For some reason it is ok now after I've installed FF 3.0.6 and then made an update to 3.6.

My mail will not open and will not let me quit it. Help?

My mail will not open and will not let me quit it. Ive tried to restart my computer but it wont let me do that because it says the Mail has canceled the restart. It does the same thing when I try to shut it down. Can someone help?

Welcome to Apple Support Communities
Press Alt, Command and Esc keys, select Mail and force close it. Finally, restart or turn off your computer

After trying to down ios 7, iPad will not charge, will not open and will not connect to itunes. The only display I will get is the apple logo, or low battery warning.

After trying to download ios 7, iPad will not charge, will not open and will not connect to itunes. Sometimes, screen will switch from Apple logo to low battery notification, but doesn't look as if battery is charging.

Connect with cable to computer. Your ipad is in recovery mode.
Follow directions to fix
http://support.apple.com/kb/HT1808?viewlocale=en_US

I have an Iphone 4 and the camera shutter wont open, I have tried most things and it has still not opened, it has not worked since I have got it. What should I do?

I have an Iphone 4 and the camera shutter wont open, I have tried most things and it has still not opened, it has not worked since I have got it. What should I do?

Here's basic troubleshooting for iOS:
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/troublesh ooting-ios
(Note that my links to other pages may promote my organization, and this should not be taken as an endorsement by Apple)

Iphone 4 black screen, tried dfu mode, itunes not picking up device. not able to bring up red phone off slide bar or apple logo if any combination of button holding. HELP

iphone 4 black screen, tried dfu mode itunes not picking up device. not able to bring up red phone off slide bar or apple logo if any combination of button holding.
Phone was given to me by apple 2 weeks ago. Last I saw of it working was phone was off so i did the quick reset. Apple logo came up, it started up and keypad for passcode came up. It said 2% battery then went up to 64% a second later. When I was playing wth it not 5mins before it was at 65% so would make sence that later indication was correct. Before I could type the 4 digit passcode in the phone turned off to black screen. Now I have tried all possible reset options incuding the 10 second hold down of both buttons for less than 10 seconds and longer than 10 seconds. Nothing is working. iTunes is not recognising the device at all. Ive had it plugged into a wall socket for three hours and the computer for 2 hours and no signal of life. Ive tried the forums on here and the youtube vidoes and seem to know what im doing with resets. Anyone able to shed some light?

Not being able to get DFU Mode indicates hardware failure. Since you recently received this iPhone from Apple it has at a minimum 90 day Warranty. Make Genius reservation or make service arrangements and take or send to Apple for resolution. Regarding what is actually wrong with the iPhone, it could be possibility of several things. But some of the features point directly to battery. First step in fixing this iPhone would be battery replacement. Then trouble-shooting from there if still problem. Take it to Apple.

Why is my Iphone 5 not opening safari and not recognizing my verizon data plan?

Why is my Iphone 5 not opening safari and not recognizing my verizon data plan?

What did Verizon say when you called them.

HT6114 I have upgraded to OS X Mavericks and my MacBook keeps crashing and my numbers and pages programs will not open as they are being updated continuously.

I have upgraded to OS X Mavericks and my MacBook keeps crashing and my numbers and pages programs will not open as they are being updated continuously

The next time the crash happens, note the date and time the problem occurred, then go to Applications/Utilities/Console and copy the log starting at the time of the crash. Paste the log in a reply. Please do not use a screen shot as they can be hard to read. If there are repeated runs of the same messages, please post only one run. Be selective about what you post and don’t post huge amounts. Make sure there is no personal data visible. Information learned from Linc Davis.

Nvidia Input/Output error. Could not open the device file /dev/nvidia0

Hello, I finally have Arch running on my MacBook pro 3,1 (mid 2007) but when I startx after installing Nvidia drivers it gives the Input/Output error and states "could not open device file /dev/nvidia0." I tried everything from the Nvidia wiki, and nothing seems to work. Does anyone please have any other ideas or things to try? My Nvidia card is 8600M GT and I have installed xorg-server, xorg-apps and Nvidia-utils already. Also is it possible my graphics card is not compatiable with this new kernel? Thank you for your time.

You know that this posts a huge list - and I couldnt remember how to trim for certain keywords (which one would you be interested in?).
So here the last few things regarding Video: from dmesg:
[..] nvidia: module license "NVIDIA" taints kernel.
[..] Disabling lock debugging due to kernel taint.
[..] nvidia 0000:01:00.0: enabling device (0002 -> 0003)
[..] vgaarb device changed decodes: PCI:0000:01:00.0,oldcodes=io+mem,decodes=none:owns=none
[..] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.37 Wed Aug 8 19:52:48 PDT 2012
then comes Swap, wlan, eth0 etc..

Can't get MIDI Setup to open

I am unable to use any of my midi controllers with my new Macbook Pro OS X 10.7.3.
Checked on M-Audio's website to see if I needed any drivers for the controllers and it says that all are class compliant.
I tried to open Audio-MIDI Setup I got this message. "Audio MIDI Setup couldn't open the MIDI Server so you can't view or edit your MIDI configurations. If you recently installed a new MIDI driver, try uninstalling it and then open Audio MIDI Setup again. If Audio MIDI Setup works correctly after that, contact the driver's manufacturer for further support." I never downloaded any MIDI drivers FYI. I will also attached a screen shot of the window that popped up that reads the above statement. What should I do next? How can I get my MIDI Setup?

Hello all,
I was wondering if you ever were able to access your midi setup window? I have the same exact problem. I plan on pasting the kextstat -kl | awk ' !/apple/ { print $6 $7 } ' in my terminal window tomorrow when I can have access to my Mac again (left it at work).
I'm absolutely dying to get this problem solved. I took it back to BestBuy and they told me I should wipe and reinstall everything. I just cannot believe that is the only solution.
Please let me know if there is any information you can give me that might help.
My Mac is only two months old. I was able to access my MIDI setup window for a few days even after I downloaded a digidesign driver. As of last week all I get is the same exact pop up window that you posted last year. Unbelievably frustrating.
Thanks for any help!
-Reid

MacBook Audio/Midi setup crashes in Midi

Hello all,
I have a MacBook C2D and a Korg Microkontrol connected via USB. The MacBook sees the MicroKontrol, but only as midi in and out instead of 5 midi ports it should have. When I click on the Microkontrol icon, Audio Midi setup crashes.
I would like to use the 5 ports - any ideas? I run Ableton Live and it sees all 5 ports and uses them.
thanks,
dustspec

Thanks for that Bob - The article was very helpful but I am still crashing. I'll have another look at the logs and see if I can find the problem.
My MOTU Ultralite is coming up greyed out in the midi devices section so maybe that is part of it?
dustspec

I have a problem in activate Alaaclaud account and I can not open the device

السلام عليكمI have a problem in activate Alaaclaud account and I can not open the device

Standard troubleshooting...
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
If still a problem restore with your backup.
If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
If still a problem, it's likely a hardware issue.

HT201441 Please help me I forgot the password for iclaud I can not open the device I want a solution "

please help me i forgot the password for my iclaoud i can not open my the device

Try to reset your password here: http://appleid.apple.com

Audio-MIDI setup not opening? MIDI device not being seen?

Similar Messages

Maybe you are looking for