Audio missing on video camera

The audio for music, podcasts, ring tones, and even You-Tube work perfectly fine, for both speaker and ear phones, but I cannot get audio when recording video. This problem started a few months ago and seemed to "fix" itself. It's back again and a restore and update have no effect on fixing the problem
Anyone elsehaving the same issue?

bcap wrote:
This seems to be an ok work-around. Didn't take as long as I thought.
Although a 4 minute video is still almost 2GB. Is that normal?
What are the best settings in QuickTime or MPEG Streamclip to export to for YouTube? How about for DVD burning in iDVD?
For iDVD, I would just use the master you already have. iDVD will have to compress it to DVD format. There is no need to do an intermediate conversion, that would add time and degrade quality somewhat.
For YouTube, it is likely that you *do* need to pre-convert, for two reasons: the file is too large, and the format might not be accepted anyway. The most obvious choice is to h264. It will likely be compressed again at their end. I am not sure as to what the best settings might be.

Similar Messages

Audio missing from video recording.

I recorded some camp footage with a canon rebel T2i. there is audio when i play the clip in imovie timline, but when i export it there are peices of the audio missing. I have removed the clip and re-uploaded it several times and the audio is still missing in the same places. Im not sure if maybe i have the setting wrong or if maybe the file from my camera is corrupted.

Same problem with me and it seems a lot more users. Audio and Video are playing fine in other players and other types of video, everything is connected as it should. You would think that something major like this would not get past quality control before it's being released. I'm getting more and more agitated as there has been absolutely no mention of this from Apple, yet this seems to be a wide spread and major problem. I bought Season 1 of The Office tonight and it is rendered useless because audio won't play, and the DRM limits how you can view your videos.

Stereo audio when using video camera? Any way to do this?

Is there any way to record in stereo (2 mics) when recording video with the onboard camera? Can the 30-pin connector receive a stereo signal when videoing? (iPad3, iOS 7)

I figured it out myself so thought I'd share this for anyone else who wants to record video with the audio portion in stereo, you can do this using Sonoma Wireworks' GuitarJack2 in conjunction with a mixer. Keep in mind this isn't a portable solution at all but the resulting audio is excellent, especially in headphones so this is great for doing a video of yourself singing and playing guitar (for example) and you want to capture a good stereo audio signal. Basically, the way is works is you plug your two mics (we're talking recording style microphones with the XLR connectors) into your mixer of choice. You then run a line out of the mixer into the 1/8" audio input jack of the GuitarJack 2 (it's a stereo line-in) and the 30-pin connector goes into your iPhone/iPad. There are a couple of settings you have to make with the software for the GuitarJack but once you've done that, you can then make some videos with terrific stereo sound. You monitor the audio via the headphone jack of your mixer. If anyone knows an easier way to do the same thing, please let me know but this is the only way I've found.

Audio missing during video call

[Topic title updated by moderator to be more descriptive. Original topic title was: "Thank ago"]
I call video call to my sister away, complete with audio accessories, but somehow, I just saw my picture, but no sound is heard, I tell you I still hear normal,
I need your help

when I video call I can hear them but they cannot hear me. But when I call them on there phone no problem

Audio missing from Video Podcasts after upgrade to ITunes 6.02

This seems to be a common problem with no answers from Apple. All my videos have had the sound track rendered silent after downloading 6.02 upgrade. The new downloads are silent as well. Tried reinstalling Quicktime and ITunes to no avail. Program is acting pretty chunky now responding to commands when in video mode also.

Same problem with me and it seems a lot more users. Audio and Video are playing fine in other players and other types of video, everything is connected as it should. You would think that something major like this would not get past quality control before it's being released. I'm getting more and more agitated as there has been absolutely no mention of this from Apple, yet this seems to be a wide spread and major problem. I bought Season 1 of The Office tonight and it is rendered useless because audio won't play, and the DRM limits how you can view your videos.

Ideas for mixing video camera audio??

I know there is not one way to modify the audio from a video camera. I have a (dead room sound, not quiet a hiss); are there any recommendations to modify the sound quality? Everyone tells me that you I have to play around with it... But I have no ideas of where to start???

How someone would decide what adjustments needed to be made is entirely dependent on the condition of the audio as it is. And since we can't hear it, the best advice anyone could offer is just a guess.
You could upload a sample to a website then post a link here so people would be able to hear how it sounds now and then be able to offer more specific suggestions.
-DH

Camera to video camera switch missing on iphone 5/ios6

i have had my iphone 5 since yesterday, and noticed today, that the switch to change from camera to video camera is missing?? I have force quit / closed the application and re-opened the camera... but still the switch is missing?
Sanjay

right. figured it out... weird one... so I have just been on a 3 hour conference call... and as soon as i got off the call.. and then went to camera... the switch appeared?... to test, it - i then called a friend... and went to camera... no switch. it seems that whilst on a call... you cant record video... only take photos through the camera app
sanjay

Share to video camera: audio, but no video

I'm trying to backup my iDVD movie to a videotape like I've done a number of times before. But when I try to "share" the move to the video camera, I get audio coming through but no video. The cable appears to be fine...I can see video from the camera within iDVD when I try to download it from the camera, but there's no video when I try the share option.
Any thoughts on what's up here?
Thanks.

Thanks for the replies.
I mis-wrote in my original post...I'm trying to share back to the video camera in iMovie, not iDVD. Apologize for that.
I've checked that box in preferences as recommended (don't think it was checked before when I've shared this way successfully), but still only getting audio back to the camera, no video.
Any other thoughts? I have ordered a new firewire/DV cable, so I'll get a chance to see if that helps in a day or two.
Thanks again.

Video Filter missing: PR.ADBE Camera View

Hi, I get the following message when I load my premiere project:
Video Filter missing: PR.ADBE Camera View
I know its a filter on windows what is not on a mac because I transferd some files to my mac. I only want to know how do I get rid of this message.
Thanks

Yes, but it will be manual labour. Just go through all your clips and remove each instance where you have used it. Maybe it is shown in the timeline in a different color or with diagonal stripes through it, I don't know.

I have an iMovie that I created 10 years ago. I found the disk and imported. Everything is there except the sound! I converted in Wondershare to MPV4 but still no sound. There is an audio clip that was imported from an analog video camera.

I have an iMovie that I created 10 years ago. I found the disk and imported. Everything is there except the sound! I converted in Wondershare to MPV4 but still no sound. There is an audio clip that was imported from an analog video camera. Does anyone know how I can get the audio back?

Whitelab Records wrote:
So, 20 views and nobody's anybody the wiser?
A small update to this issue....
I have been trawling the forums to find an answer but to no avail...
And... I've tried exporting and bouncing individual stems and the full session, either by muting all bar the stem or soloing the stem.....and still nothing.
Same problems.....everything is audible in audition but nothing plays on playback.
Since the 'prelisten' channel strip is Solo safe this would indicate that you have a track or channel strip soloed somewhere else, out of sight. Are the Mute buttons on your channel strips blinking?
To view all objects in your mixer, click the button. You may have to scroll sideways to check the whole mixer.

HD video shoot on xdcam, channen 2 audio missing. how can i fix it?

HD video shoot on xdcam, channen 2 audio missing. how can i fix it?

XDCAM, and other codecs like AVCHD, have metadata located in the folders on the memory card. Best practice is to copy ENTIRE contents of card directly over to your hard drive, without using any "transfer utility" software. Then in Premiere, import via the "Media Browser" rather than "File > Import". This gives Premiere the very best chance of correctly figuring out what kind of video and audio assets it is dealing with so it can handle them correctly.
Hope this might help
Thanks
Jeff Pulera
Safe Harbor Computers

Why is audio missing from MP4 video?

I am using - - Adobe Premiere Elements 10, Windows OS7
I have 11GBs of high quality (1.5GB = 15 min) mp4 video clips and I would like to edit and burn a couple of DVDs. When I import the clips they look fine, but there is no audio. (Yes, I have audio elsewhere on my computer and can hear these clips when I use any other player.)
I tried converting them to .avi with Format Factory and I *can* hear them when I import to Adobe, but they are now "frozen" or "jumpy" and it is very difficult to navigate through the clips because the Play/Pause button has quite a time lag before responding.
Should I convert to some other format? I'd like to keep as much quality as possible. I did convert them all to VOBs and made a "test" disc, but it dropped 11GB down so low that it will all fit on a 4.7GB disc. I'd rather make 2 discs and keep the quality up (though the one I made looks and sounds pretty good).
Any suggestions would be appreciated. Thanks.

Val8583
Let me recap to make sure we are in sync on this.
Knowing what you started with and the video properties as they evolve through needed conversion....
You come telling us and demonstrating to us that you have source video
AVCHD.mp4 (1920 x 1080 @ 29.97 frames per second) and that has MPEG1 audio.
When you import that into Premiere Elements 10 Windows, you get video but no audio.
The destination for that Timeline is NTSC_Widescreen Dolby DVD.
In terms of setting the correct project settings, it would be important to know if you have
interlaced or progressive video. But, since you not hear audio at that point, more
important/pressing things to pursue.
Aside from the pressing audio issue, at this point the choice of project preset would still be
NTSC/AVCHD/Full HD1080i30 (if you have interlaced video)
or
NTSC/DSLR/1080p/DSLR 1080p30@ 29.97 (if you have progressive video).
Either way, we need a 1920 x 1080 frame size project preset to match the 1920 x 1080 frame size of your source so that
when you are in the Edit area you can edit your video in the correct space there. The final export setting is another matter. You
should not be using a NTSC DV Widescreen project preset for a 1920 x 1080 video import.
AVCHD.mp4 with MPEG1 audio (no Premiere Elements sound) to ????.avi with ???? audio (unstable in Premiere Elements but with sound)
Conversion of the problem file sounds like a reasonable next step. And, you indicate that you do convert
to an ".avi" file which has then has audio with the video in Premiere Elements 10, but the file is highly
unstable in Premiere Elements 10. But, when I ask what video compression goes with the .avi wrapper, you
wrote
I just drag/drop the files to "Convert All to (whatever)" and the software does it.
All .avi files are not created equal. And, AVCHD.avi, if that is what you ended up with, is highly unstable, and for most will
not import into Premiere Elements. So, now the pressing questions include:
a. what is the video compression and audio compression and other properties of this .avi file with the stability problems in Premiere Elements 10
b. again, what are you setting as the project preset to match the properties specific to the source .avi.
Now back to the present
If you use Format Factory you should have control over your conversion settings. AVCHD.mp4 is a stable format for Premiere Elements. I suspect that the MPEG1 is problem. So, we agree conversion is the way.
I would suggest taking the time to set the settings for your converter so that you produce AVCHD.mp4 (1920 x 1080 @ 29.97 progressive frames per second) and use AAC Stereo for the audio. Then bring that file into Premiere Elements 10 with the project preset of
NTSC
DSLR
1080p
DSLR 1080p30@ 29.97
and proceed, ending with the Share/Disc/DVD disc with preset = NTSC_Widescreen_Dolby DVD.
Since this project is destined for DVD-VIDEO widescreen on DVD, you could use your converter to produce NTSC DV AVI Widescreen and then import that into a Premiere Elements 10 project with the project preset =
NTSC
DV Widescreen
and proceed, ending with the Share/Disc/DVD disc with preset = NTSC_Widescreen_Dolby DVD.
As for disc capacity, the standard DVD disc 4.7 GB/120 minutes is in reality 4.38 GB. And the DVD disc double layer single sided 8.5 GB/240 minutes is in reality 7.38 GB. When you get to the burn dialog Quality Area (just before you hit Burn), look to see the values for Space Required and Bitrate (have a check mark next to "Fit Content to Available Space"). If you see a Bitrate reading below the max 8.00 Mbps, then go to the DVD double layer single sided disc or use two DVD standard discs.
Do your intended viewers have players that support playback of DVD double layer single sided discs?
Please review.
I will try to make the reply not so long next time. I wanted to cover all the bases this time.
We will be watching for your progress.
Any quesitons or need clarification on anything, please do not hesitate to ask.
Thank you.
ATR

AVI files loaded in Premier Elements 7 only show audio and not video.

I am a new user of Premier Elements 7 and am having problems getting the video into a new project I set up. I have 6 AVI v1.0 clips that play both audio and video in Windows 7, but when I set up a project and import them, I only get the audio side and not the video side. I can drag the audio to the timeline and can play the audio just fine. But it is missing the video. I must be doing something wrong, but am new enough that I don't know where to turn.
I have been reading the forums and taking tutorials, so I think I know the steps to import a video into PRE7. I've tried many things, but still no video. I downloaded GSpot and found that my files have video H264 (H.264/MPEG-4 AVC) and audio oxooo2 (ADPCM). The codecs seem to be installed on my Windows 7 computer.
Can someone point me in the right direction on what to do next. I'm a computer professional with 50 years of experience, so am no dummy, but am new to PRE7. Thanks in advance.

I found a mini-CD that came with the product. When I loaded it on my computer, one of the options was to install a device driver. I did this and now I can see the video in PRE7. So, I think this solves my problem.
I applaud the mfgr. of the Insignia. This is the way that it should be with ALL cameras, that do not use a miniDV tape, or precise CODEC, that is mainstream. All too often, the mfgrs. tweak an existing CODEC, and just leave the customer hanging, trying to find a way to edit the footage. A couple of major mfgrs. come immediately to my mind.
Others, who use CODEC's, like Xvid, that is so heavily compressed, that even converting it to an editable format/CODEC results in such horrible footage, that no one would ever be satisfied with the finished product.
<Soapbox Mode Off>
Glad that you are now up and editing. For my education, what does G-Spot say about the CODEC in the Insignia footage? At least next time that I encounter it, I can say - "look in the box, and install the driver to get the CODEC."
Thanks for reporting,
Hunt

Download Connect Recordings, Audio but no Video

Hi All
I am using the https://www.example.com/p10101010/output/filename.zip?download=zip method to download recordings from our Connect platform. (note: i am aware of the "make offline" option but this is not a good solution for me)
so, I get a .zip file with some .flv and .xml files but there only seems to be audio content, no video. The file i'm playing is the cameraVoip_0_2.flv which gives me audio, also the recordings i'm trying to download are 1.5 to 2 hours long so i was expecting much larger files than the ones that appear
from looking around the various forums it seems there should be a "screenshare.flv" file present in the downloaded zip, but its missing from my .zip... screenshot below
I have also used the Adobe Desktop client to "fetch" the files for local play back and although the quality is not great, they would be fine for my purposes. However i can not locate the file(s) on my PC, Does any one know the path which the desktop client uses to save the files locally?
I dont think I am alone in having trouble with this issue of downloading recordings, but I have searched extensively for a fix...but no joy :-/
thanks in advance
Dave

Hi Dave,
Regarding the screenshare FLV; this is only present if you have used screensharing in the Meeting you recorded; it is not present by default. How was the video brought into your meeting room, via the camera pod or other?
Is your Adobe Connect site on-premise (hosted yourself) or hosted by Adobe? If the latter, I can take a look at our logs and see what happened here, just send me a private message with your room URL.
As for where the Adobe Connect Desktop offline recordings are stored...
On Windows XP its here: C:\Documents and Settings\user-name\Application Data\com.adobe.connect.desktop\Local Store\
On WIndows 7 it's here: C:\Users\user-name\AppData\Roaming\com.adobe.connect.desktop\Local Store
Lauren

Using a Panasonic HC-V500M video camera with an iMac?

Does Imovie 08 (7.1.4) support a Panasonic HC-V500M video camera? Have been able to transfer movie to Imac with Imovie '08 but audio doesn't transfer. Why? What should I do to get audio?

From what I've found through reading the topic in several digital movie
forums, you should be able to use iMovie and have it import the file
from the camera for use and editing in the Mac.
This path may be version dependent for best results; and I am not
sure which versions of iLife's iMovie would be best for use with the
digital camera and also may be compatible with the older Mac iBook.
Some Panasonic digital video cameras are also seen by iPhoto and
in some cases, that can find the movie file and import it for iMovie.
And there are other Panasonic video devices which create the same
kinds of files, and there is a free or shareware software out there to
help use them. This may include players by third parties and others
which may be able to edit digital movie files.
In some digital movie forums, there is an awareness of Panasonic
products not necessarily being the best supported for Mac OS X;
while many pro users of Panasonic products have Macs, among
them are newer Intel Mac users with Parallels, BootCamp, etc
and they can run XP or Vista-ready software. If this is (still) true,
then Panasonic may be missing out; since modern products
should have support in their retail box for both major platforms.
Some Panasonic products have shipped with Mac software for
several years now; along with Windows software. Some didn't.
Hopefully iMovie can see the Panasonic digital movie files; if the
iBook can support the feature set of iMovie. Some aspects of
this part of iLife require the ability to record to DVD media and
also may require more system assets & resources than you have.
Good luck & happy computing!

Audio missing on video camera

Similar Messages

Maybe you are looking for