Audio monitoring follows video to Firewire Output

I'm a new FCS/Soundtrack Pro user but have been using ProTools LE and HD for some time.
When I select Video Out Firewire to view my video on an external monitor my audio monitoring follows and feeds the firewire device instead of my internal Mac outputs or my DIGI-002R.
I only want to view the vision on the monitor and keep my audio outputs playing through the DIGI002R. Is there any way of achieving this or am I missing something in the setup?

DV-Video to DVI Converter

Similar Messages

Audio not following Video

Hey Guys,
I keep getting this problem. I transfer the files from FCP to DSP.
If I view the video in the time line it looks great. But in the simulator its like an old Japanese movie where the audio voices do not align correctly with the video.
And once its burned it doesn't align up either.
Any tips on how I can fix this?

Take a look here for a recent discussion and some links
http://discussions.apple.com/thread.jspa?threadID=844673&tstart=0
Also note simulator is not 100% reliable, but check out that thread and the others and see if they help

Audio Monitoring, external tv viewer - no sound on tv

Hi.
I'm having trouble getting my tv to play the audio as I view it. Is that normal?
I can hear it on my computer, and i can see it on my tv, but I can't hear it.
When I fiddle with View>Audio settings>Follow video, or >default, best I can do is hear real sketchy sound - almost like I'm listening to the fan on my computer through my camcorder.
Any thoughts? I like the speakers built into my tv better than the ones on my computer.
Thanks!
fcp 5.1.4, Macbookpro w intel; wd 250 passport drive for scratch; firewire ntsc video out to camcorder, rca and dv (roundish jack) into tv.
Using View>all frames, refresh external device, and tried all Audio playback settings.
jc

Audio follows video is the correct setup for sending audio to the camera then on to the monitor.
Are your audio cables connected correctly?
Do you have the camera set up properly to pass through the DV>analog conversion?
Is the audio in 48khz/16bit format?
x

Firewire output option to display to a monitor VANISHED

I seemed to have lost the firewire display "out" in my menu to display to a monitor. I re-installed FCP2 but the problem still exists. I can play the timeline in the canvas, but the choice to display via firewire is missing. How do I re-install this possibility?

Shane's Stock Answer #8: External Monitor Viewing
If you are working with DV, this is simple. First connect your computer to a camera or deck via firewire, Then connect the camera/deck to your TV/Monitor via RCA or S-Video.
Then start up your camera and tv, then open fcp.
Go to the View Menu, choose > External video > all frames
VIEW>Video playback should be Apple firewire NTSC (If you are using an NTSC set)
VIEW>Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section.
If you are working with HDV footage, FCP 6 allows you to view this via firewire, but ONLY as downconverted DV. It won't look the best, but you can see it. To do this,
If you need to view any format other than DV at full resolution, then you need to look into capture cards. Several standard definition and high definition models are available from www.aja.com and www.decklink.com. With these options you'll need a proper monitor to view full broadcast colors, but all models allow for realtime standard definition downconvert, allowing you to view HD on an SD monitor.
The Matrox MXO is another option that is output only, but allows you to view your footage on an Apple Cinema Display at full broadcast quality.

Can't output video to Firewire via Canopus..

Hi all,
All of a sudden today, I am not able to output video via Firewire to my Canopus ADVC-110 with Final Cut Pro 6. I do however have video output when using programs like Logic, so the Canopus appears to be working fine. I checked the Audio/Video settings in FCP and have Firewire as Video playback, but no output is going to my monitor. What settings do I need to be looking at, in FCP. It's clearly something I did, and would like to correct it, so I can monitor video again. Please advise.
Also...one other note, I can't seem to playback video through Firewire in Soundtrack Pro as well. But Logic Pro plays vide through the firewire device just fine. Anyone have any insite on this? Thanx in advance....

Make sure the light is in the DV mode...press the big button a couple times to make sure. Also make sure you didn't switch to PAL mode from NTSC or something. AND...
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane

FCP Problem with Firewire output to external monitor and speaker ???Help

i have a g5 powermac. the problem is when using Final cut pro 4hd. when i output my work through firewire to my external monitor and speaker i have a problem with the audio signal. Theres feedback/noise/hiss from the speakers. The firewire connects to DSR-11 vtr deck which feeds my monitor and speakers. it only happens when in FCP is set to A/V firewire output. does not happen if Video output is not set to firewire.
I Diagnosis is that it is not my dsr-11 deck or firewire i've ruled those out. The problem is either FCP software or Hardware problem with my G5
Does anyone have a similar problem. please respone, i will try to answer any respones,
Thanks
powermac g5 powermac

CaptM
From the firewire that feeds the dsr-11. on the output, i use s-video cable to my monitor (sony pvm-14l) and High Quality rca cables thet feed the audio to the Roland Speakers.
I've changed all wires and still have audio problem. I,ve changed my Dsr-11 deck to my camcorder and still have the problem.
If any of u guys use FCP The problem happens When I select view> external Monitor > and select firewire for Audio/ and video. I have never changed my editing habits, something just went wrong with the signal, I think its a Hardware problem with the firewire connection. I'm Going to have to bring this to a Apple Service Center In my local area one day.

Monitoring HDV through Decklink with Firewire Audio Monitoring - Latency

A question for all you pro's out there...
I am currently using Final Cut Studio on a Mac Pro with a Decklink HD Extreme card for monitoring video and a M-Audio Firewire 410 for audio monitoring. My output settings in FCP are having the Decklink for video viewing on a HD Monitor, and Using the firewire 410 for a multichannel audio output. I seem to be having a sync issue with the video and audio not in sync. Does anyone know how I might can correct this sync issue?
What is everyone doing for Multichannel sound?
Any ideas?
Thanks for any help!
Bob

Did you capture threw the BM Decklink? You might have an issue with sync if you did. If you used firewire then its an adjustment I sure. I'm sure there must be a control panel for the BM Decklink. If you can't find it take two asprins call Black Magic in the morning.
Good Luck
Z1&V1user

Audio Follows Video greyed out

I am working with a sequence that uses clips that were shot DVC Pro 720p 30, NTSC. Suddenly, when looking at interview content in the canvas and viewer, the sync for content from a particular reel is slightly off. I noticed under the view menu / audio playback, audio follows video is greyed out. The only options are default or built in output. At first I thought that was the proglem (can anyone tell me why it is greyed out, and if I need to select this somehow?)
Interestingly, however, other clips in the project, shot on the same day, do not appear to have the same sync problem. What would cause the sync problem on this one reel? I did not notice the sync problem when previously working with the material.
Thank you so much in advance.

I seem to remember this happening before with captured material. Can someone answer the question of whether I should switch the sequence settings to the settings that I used to capture the clip originally?
Or could the clip have been corrupted, and if yes, what to do? Or is the simplest solution to re-sync by eye? It's sort of like when the data flow isn't fast enough and sync is lost.
Thanks to all for your comments.

No Audio When using Video Out to Firewire

I do not get any audio when I use Firewire ntsc as my video out. When I set video out to canvas playback then I get audio. I want to use print to video but I cannot because the audio will not work with Firewire. I get the image on my external monitor but not the audio. I checked to make sure and the audio was not on the recorded dvd. I cannot not use print to video with canvas playback.
My Easy Setup is Format: NTSC, Use DV NTSC DV Converter. I tried using Firewire basic and got the same results.
Please Help
Ken

The audio does not play at all from the timeline if video out is set to Firewire. To answer your question, no the audio does not play in the external monitor when playing back from the timeline when Canvas is used as the video out. However, I don't believe the converter box is the problem. The audio would play in the internal speakers when using firewire as video out but it does not.
Is there a problem with FCE 4?

Firewire Output for Video Preview Intermittent

I'm experiencing a frustrating problem with After Effects these days.
We're producing some video to be projected, so to see what the final output will really look like, I'm doing video previews using FireWire so output goes directly to the projector.
It's been working great up until yesterday. Was working fine until I had to restart my Mac. Upon reboot, my the projector no longer gets any video output.
I've tried restarting numerous times, checked all connections, etc. Got it working again after several restarts, but after switching over to Photoshop momentarily, the video output once again disappeared.
Any suggestions on how to regain consistent Firewire output for Video Previews?
My setup:
After Effects CS6
Mac Pro
OSX Version 10.7.5
Firewire Output of my Mac's monitor is going to the Firewire Input on my Sony Media Converter
RCA Video out (Composite video) going to the projector's video input.
After Effects Video Preview preferences:
Output Device: FireWire
Output Mode: Apple FireWire NTSC

Thanks for your reply, Rick.
I finally figured it out... I had a background application running called iCam that monitors my security cameras. I had forgotten that it uses Firewire and was intermittently hogging the resources. Once I quit that application, everything was good once again.
Thanks for taking the time to respond, much appreciated!
Mike

FCP Crashing When Printing to Tape Using Audio Follows Video Setting

I'm trying to Print to Tape using the Audio Follows Video setting from FCP. I am using a Sony DSR-11 Deck and a Mac Pro. I was able to Print to Tape successfully earlier today, and I have done it successfully many times before. Every time I try to Print to Tape with the Audio Follows Video setting, FCP crashes. Actually, every time I play audio from the timeline using the Audio Follows Video setting, FCP crashes. I have deduced that the problem must be with the Audio Follows Video setting, but I'm not sure what to do to correct the problem. Thanks in advance for the assistance.

Well, what version of FCP are you running?
Final Cut Studio 5
How is your media stored? Number of hard drives, how full are they, ect?
I have two hard drives. One is 250GB the other is 750GB. I have my applications on the 250GB drive. All of my media is on the 750GB drive. My computer is brand new, so I haven't even come close to filling the drives.
What is the format of the media you are trying to send out to the DSR?
I'm going Firewire out of the Mac Pro to the DSR11 to a Mini-DV tape.
Have you tried doing a crash record?
I would rather not do a crash record if at all possible. I know that is a back up option, but I also know that my system is capable of working properly.
I really appreciate you trying to help me out on this.

Simultaneous import of video via firewire and audio via in-line audio port

I have a converter that takes the S-video and audio input from my DVR then converts both to DV format, and then outputs via firewire. I hook the firewire up to my G5, open iMovieHD, and the application recognizes that as a camera and imports wonderfully.
Well, the audio comes through with a MAJOR buzz or hum. It's probably the converter, but the buzz/hum is not enjoyable.
So, I removed the audio from the converter, and the video converts wonderfully in iMovie without the audio. I have the audio coming in through my audio line-in.
I start to import my video, and iMovie starts recording the video. But I want to record the line-in audio at the same time. But when I switch to audio to turn on the input from the line-in, the video stops capturing.
When I start to capture audio first, then switch to capture video, then the audio stops capturing.
Is there any way that I can capture the video via firewire for one "track", and my line-in audio for the other "track", and have them play simultaneously in iMovie during capture??
Any help would be appreciated. thanks Adam

hey there badkitty 42,
i don't think you can do that. it sounds like your issue is electrical. try turning the plug around on each piece of gear in the chain & listen for the buzz. if it's not heard you've found the cause of your ground loop. you can also pick up some of the 3-prong orange or grey electrical adapters from Lowe's or Home Depot to see if you can "lift the ground" to get rid of the buzz. i'd try one on the convertor 1st. one last thing, do you have any flourescent lights in use on the same circuit or in proximity to where you're doing your transcoding? these are notorious for inducing 60Hz hum in audio & video gear.
good luck.

I am trying to display the output from my ipod touch on apple tv. i can get the audio but no video. please help

i am trying to display the output from my ipod touch on apple tv. i can get the audio but no video. Thank you for any advice.

What output are you trying to get to your tv?

How to fix audio of a video captured from DV output of camcorder using Adobe Premiere Elements 8?

Hello,
I purchased Adobe Premiere Elements 8 about one week ago. I installed it and everything seem to work well in my first project. I am new at editing videos but I was succesful in testing it by loading an existing video file in avi format from my computer and then doing some very basic editing (I splitted 2 scenes and added a title).
After my first succesful project (described above) I started a brand new project. Here, I want to capture a one hour video from the dv output of a video camera. So I connected the camera to the PC and then started adobe elements 8. Before starting the capture I only checked the boxes that said "capture video" and "capture audio" (the other 2 boxes that said download to timeline and autoanalyze were left unchecked). After that I started the capture process.
After the video capture was completed, a small window opened at the bottom saying that a PEAK FILE was being generated. After the peak file generation finished, I looked at the captured video. The video looked perfect. However the audio of the video was too fast. By this, I mean that the voices of the people in the movie were like they were speaking at more than twice the normal speed. Or to explain it in a different way, they sounded like the chipmunks.
So now I come to the question of this thread I started. Is there a way that I can fix the audio part of the video I captured? I will appreciate any help on this. Below I listed a few additional details in case this is needed.
Thanks,
ronel_8
PS. Here are some more details about my system:
1) Operating System: Windows XP
2) I am capturing the video on an external drive with 40 GB of available space. The external drive is connected to a PC via a USB connection.
3) Computer CPU: 2.4 GHZ
4) Computer RAM: 1.25 GB
5) Video tape is about one hour long.

Hello Bill and Steve,
Your responses are very helpful. Although I was not able to fix the problem yet I do seem to think from what you both say that my system may be too slow to capture the one hour video. In any case I will copy below more details about the system as you requested:
1) Results from running Gspot:
The audio section of the Gspot window was blank. That is, no information was there. The File and Container sections say:
File Size: 12.6 GB
Note: 7.63 GB unneeded bytes at the end of the file
DV Type1 AVI
2) I did run the Gspot on another good avi file (captured to the PC with same camcorder) and says:
Codec PCM Audio
32kHz 1024 kb/s tot (2 chnls).
I suppose these are the audio settings from the camera.
3) Yes, I am capturing video from a miniDV camcorder (JVC GR-D70U).
4) I did not defragment the external drive prior to capturing the video with the audi problem. So I will give that I try and see if it solves the problem.
5) The external drive I am using is formatted to NTFS.
6) The computer is a Dell Dimension 2400, CPU: 2.4 GHZ, RAM: 1.25 GB
7) HDD Size=74GB and 11 GB of free space. But I am downloading video to external drive that has 60 GB free space.
One last piece of information that may be useful. If I open the AVI file (that I captured with Adobe Premiere Elements) with Windows Media Player, the audi sounds good. However if I open it with Adobe it has the problem I mentioned in my previous e-mail.
I'll aprreciate any further hints.
Thanks again,
ronel_8

Video cable for the Iphone 3G - audio only, no video output to TV

I have been reading that with the iphone 3G you HAVE to buy apples video cables in order to play back video on your TV, is this true?
I just got a cable for christmas and it isn't officially licensed by apple and the video does not output to the TV, only the audio. I hope this isn't the case, but maybe it is true??
If my cable isn't working because of some need (forced on us by apple) to only use "apple" cables I will never purchase videos from itunes. It seems rather trivial to have to buy proprietary cables for more $$ in order to buy videos from itunes doesn't it??
In other words... Give us more money so you can keep buying things from us.
Sorry, I am a bit frustrated.
Message was edited by: zstevek
Message was edited by: zstevek
Message was edited by: zstevek

Let's be constructive:
BUT WHY doesn't it work? and how can we fix it/make it work?
my cheap 'non apple' video cable works fine initially, then a message pops up about it not being an 'offcial' cable or some such, then asks if I want to enable airplane mode (both with or without it already disabled), and disables video out completely. Contrary to the many others that have overpaid for your proprietary cables; I'm NEVER EVER EVER EVER going to pay you for your atrociously overpriced cables, because you're action of 'disabling' 3rd party cables is monopolistic in any sense, destroys any hope competition in this area, hinders innovation by third party peripheral developers, and is downright unamerican imho because it does so. You've gone to far this time apple! I've come to the conclusion, you obviously don't care about functionality, as your hardware is almost always overpriced, proprietary, good looking junk, and you keep shaking my pockets for more money with your overpriced accessories and constant barrage of itunes streamery.
Anyway, how can I use my device to do video out on this officially licensed apple dock I have? It doesn't seem to work; and I paid a lot of money for it. If there isn't a solution; maybe you should give out refunds for all the devices that now don't work? Thanks

Audio monitoring follows video to Firewire Output

Similar Messages

Maybe you are looking for