Audio Monitoring with Guitar input? HELP, please?

Hi.
Running a MacPro, with Logic Pro 7.2.3. I have recently purchased an IK Multimedia STEALTHPLUG, to record electric guitar.
I am able to get the device to operate properly in Garageband, and Ableton Live 5. But, in Logic Pro, i cannot get the audio to be monitored through my USB speakers. I can only hear 'live' guitar/as i play it if i choose the Stealthplug audio 'driver' option in Audio Hardware and Drivers. In this case, the live guitar is heard through the headphones plugged into the Stealthplug's headphone jack. I can also hear the Logic softsynths through the headphones, as well as any audio tracks recorded. When i switch back to the Core Audio driver, i can hear the guitar tracks i've already recorded, as well as the synths. But, the switching back and forth is ridiculous, and Core Audio has to be 're-booted' each time.
But, i need/want to monitor ALL sound through the speakers. I've tried all manner of settings, but i get nada. Spoke with iKMultimedia, but they seem to be shirking responsibility now because the device works with other apps.
I've tried the Audio Midi Setup in Applications>Utilities, as well as System Preferences>Sound. No combination of settings work.
Mac OS X (10.4.7)

You need to setup an Aggregate Device in Audio/MIDI setup. Design it with the Stealthplug as the input and the speakers as the output. Then select that device as the I/O within Logic. (I'm not sure where that particular setting is located, since I'm not in the studio at the moment, but I'm sure that the process is described in the manual.)
Good Luck!

Similar Messages

Beeping noises while recording with guitar. Help, please.

I am trying to record with my guitar in Garageband. There is a constant beeping noise in the backround. I have changed the input to the usb port that is hooked up to the guitar. I have read many forums about this problem, but nothing has helped. I really could use help. Thank you.

Did you ever figure this out? I am getting the same beeps and am at a loss of what to do.
Thanks
~svgklingon

My imessage isn't working when i send messages to people with iphones that have imessage it works with very few people, now it's starting to stop working with those people. help please.

my imessage doesn't work between my friends and i. i have a new iphone 5. my messages only work with some people. with others imessage doesn't work in the first place and now its starting to stop working with other people help please.
& yes we all have imessage on.

Hi there,
I see that you are having IMessage problems. Some of the problems might be:
- Your friends IMessage is not activated (you have to activiate it with your apple id)
- Your IMessage is not activated
Here is some links to another person`s Imessage problems:
https://discussions.apple.com/message/17301880#17301880
https://discussions.apple.com/message/20142285#20142285
https://discussions.apple.com/message/18988318#18988318
Hope that helps!

After mixing a project i select bounce and burn the disc that is burned plays on any cd player but when i try to burn the wav or mp3 file that was created the resulting disc will only play in a computer this also happens with video projects help please

after mixing a project i select bounce and burn the disc that is burned plays on any cd player but when i try to burn the wav or mp3 file that was created the resulting disc will only play in a computer this also happens with video projects help please are there any settings i need to alter as it seems the wav or mp3 file i ceated is being converted to a data file somewhere between the folder and disc drive

Same thing for a movie file.. If you want to play back the movie via a DVD and a DVD player you must create a Movie DVD and not just burn files to a data DVD... as Data DVDs are just storage devices for files and therefore will only work with computers...
Movie DVDs are special formats that include things like menus and special file formats.. so they can playback via a DVD Player...
You will need a 3rd party DVD Burning app like Toast which is what i actually use.... or the more popular DVD Creator app...to create and then burn a Movie DVD that will playback on a DVD Player....
https://answers.yahoo.com/question/index?qid=20101220205435AA70beb

Why can't I use Airplay/Bluetooth audio output and Guitar input at the same time?

Just trying to understand why it is not possible to use one of the 3rd party guitar input devices and have AirPlay/Bluetooth output turned on at the same time. it would be very nice to be able to play wirelessely to the stereo instead of adding yet another cable to the mix.
Thanks

I found the answer:
Use GarageBand for iOS with external output devices
You can use GarageBand for iOS with external devices, including AirPlay, Bluetooth, and HDMI-equipped media devices. When using any of these devices there is no support of audio input.
http://support.apple.com/kb/HT4622

Monitors with Digital Inputs

What monitors are available that accept the Toslink input directly? Do the keyboard and on-screen volume controls still work with this arrangement?

I believe Tannoy make a set of the Elipse range of speaker with digital inputs as well. I have no idea why you would want to do this though. I suspect the gains in quality would be tiny if anything at all. You'd be better to spend more money on something less techy and get something that really sounds great!

Macbook stuck on white screen with apple logo. help please

I have a macbook (black model) and while I was surfing on internet it is frozen. so I shut it down and restarted. When I restarted, it stuck on white screen with gray apple logo and seems like booting but nothing happens.
after that, I restarted again and put installation disc (leopard) without pressing any key and it opened normally. I backed up os with time machine but in one hour it is frozen again.
restarted again but this time it did not boot normally. so i tried booting from cd with c key, it opened installation screen. I have opened disk utility top repair disk, but when I click on disc image, repair / verify disk buttons are unavailable to click and S.M.A.R.T status is not supported.
After all, I tried to erase and install system several times, but after language section when I click agree to terms and conditions, mac freeze again.
So, I do not know what to do. Any help please?
Note: I already tried PRM and Safe Mode. (after safe mode it took me to installation screen again and nothing changed.)
Any help would be much appreciated!
Uptade: Also, opened system profiler and clicked on Serial-ATA, it seems loading but do not show any info. stucked again! help please
Message was edited by: burakbey

HI,
*"I have opened disk utility top repair disk, but when I click on disc image, repair / verify disk buttons are unavailable to click and S.M.A.R.T status is not supported."*
You need to select "MacintoshHD 10.5.8 not "disc image" in order to run Disk Utility and Verify and if necessary, Repair the disk.
That's why you are seeing this dialog.
*are unavailable to click and S.M.A.R.T status is not supported.*
Also, run the Apple Hardware Test.
http://abclocal.go.com/kgo/video?id=7011117
Carolyn

My phone although fully charged has just switched itself off and won't turn back on again! I'm just coming to the end of a 2 year contract and never had any problems with it. Help please!

My iPhone 4 although fully charges has just switched itself off and won't turn back on again. I've tried taking the sim card out but nothing happens. I'm just coming to the end of a 2 year contract and never had any problems with it before. Help please.

Start here
http://support.apple.com/kb/HT1430

Firewire Audio interface with 4 inputs?

Hi, as a band we've decided we want to be able to record our drums and bass tracks on one take, then add the other instruments as tracks afterwards.
Our drum has 4 mics (bass drum, snare, hi-hat, ride) and the bass we'd plug directly into the interface.
I imagine getting an interface with 5 inputs is unlikely, so we could sacrifice the ride and put that on afterwards, which would free up one input for the bass guitar.
We were looking at this interface:
http://www.presonus.com/fp10.html
which I think would work well, but it's 499$ (Canadian) and if we could find a Firewire interface with 4 inputs which are XLR and 1/4", we'd probably go for that instead. Also, two of the microphones are condenser mikes, so they'd need phantom power.
I've done searches online and I seem to only be able to find interfaces that are minimum 8, or max 2 XLRs.

Its there on the link
Inputs 3 and 4 are stunningly flexible balanced universal inputs. Firstly, they operate exactly as inputs 5 to 8 on the rear and can be adjusted to accept standard studio input levels (+4 dBu, LoGain). Furthermore, the input impedance can be switched from Line (10 kOhm) to Instrument (470 kOhm). An additional analog input amplification of up to 18 dB (in steps of 0.5 dB) is also available. In short: There's no signal that these inputs can't deal with perfectly!
Just get two Balance to XLR plug/Cables.
Fr.BlayZay

After recent upgrades Firefox prevents links in several websites from working whilst there is no such problem with other browsers - help please.

Since a recent upgrade of Firefox links in several websites no longer work. They used to be fine and I loved Firefox. The problems do not exist with other browsers e.g. Internet Explorer, Google Chrome. More specifically, on talktalk.co.uk the links to news items do not work, nor do those to "My Account." On Barclays.co.uk the link to print my statement doesn't work - similarly on MBNA.com
There are several suggested solutions around the internet but all are complex, none so far have worked and I don't see why I should need to carry out the suggested tweaks. Firefox used to be great - now it isn't. The problem seems to be with the upgrade. Please help me to get my Firefox to where it should be.

Thank you but please don't waste any more time on this. I have done as I said I would - removed and re- installed Firefox, cleared all cookies and caches (CCleaner) - still doesn't work. As I said at the start, the problem is not confined to Talktalk - it applies to several other sites and links. The problem does not occur with Internet Explorer nor with Google Chrome so I am now using those.

Problem with my Macbook - HELP PLEASE!!!!!!!!

Hello, and please help!
This is my second 1.83ghz 1 gb ram 80 gb hard drive Macbook. The first one mooed and had a buzzy display. This one has been perfect for three weeks. Have loved it. But today, my girlfriend shut it down, apparently properly, we took it out of it's case to use it and the fan was on FULL blast. Even though the computer was off! It then wouldn't turn on for ages. The macbook was very, very hot at this point.
Eventually it restarted when the fan went off ten minutes later. The battery level had gone from 80% to 28%. And then it said 'Mac OS X unexpetedly quit' and carried on as normal.... for the moment.
My girlfriend said 'it's done it once before' too.
Any heads up on this? Many thanks in advance.
Paddy

It definitly sounds like she instructed the computer to shut down, but did not wait for the Mac OS to actually shut off the computer befre closing the lid. Doing so suspends activity and puts the computer into sleep mode where it still uses power. If you put the computer in a bag, the heat will build up, and I would expect it do do as you described.
Ask your girlfriend if she waited for the screen to turn black or not. If she did wait for the screen to turn black, then you definitly have a problem that should be taken up with AppleCare, or Apple.
If this post was helpful, please mark it as such.

Best way to add second monitor with HDMI input

I have a 24-inch Mid 2007 iMac. Processor 2.4 GHz Intel Core 2 Duo Memory 4 GB 667 MHz DDR2 SDRAM Graphics ATI Radeon HD 2600 Pro 256 MB. I need to add a second monitor, and while I'm at it, this new monitor will be an HDTV Monitor with an HDMI input. My iMac has the original USB connections. So I'm thinking an ethernet to HDMI adapter should do the trick.
Is this right? If so, what supplier makes a good ethernet to HDMI adapter?

Hi
I've always thought powered DVI (ADC) was introduced on the Gigabit Ethernet G4s, like your dual 500. It should be easy to check, as the graphics card has an extra power 'stub' which fits into an extra slot on the logic board, between the main AGP slot and the back of the computer. If all the gold connectors on the Radeon 9000 are seated, I think you must have powered DVI/ADC. If some are 'floating' above the logic board, you haven't.

I can't find most of my files for the songs in my iTunes library and so cannot Sync them with my iPhone, Help please

Help please! When I try to sync my iPhone it tells me it can't find most of my files for the songs in my iTunes library, although the songs are there!!

Can anyone help?

I am struggling to know how to download music on to mp3. am useless with computers. simple help please !

am really struggling to transfer music to mp3. not a clue how its done. Help please!

You do not download music from iTunes as an MP3, all music is downloaded as an AAC file.
iTunes 11 for Windows: Save a copy of a song in a new format

My IPhone 4s is stuck in an update can't do anything with it. Help please.

July 2, 2014 I started an update and now it's stuck trying to update. Any help please?

Hi Russ1971 - I apologize for the delay as I understand how time sensitive this is when your phone is not working! Were you completing the update over the air or connected via iTunes? I am eager to get you up and running! May I have your mobile number and account verification (billing password 1-5 characters or if not applicable last 4 of SSN)?
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

Audio Monitoring with Guitar input? HELP, please?

Similar Messages

Maybe you are looking for