Audio (music from camera mic is not matching}

Hi All
I have the Sony dsr 300a I record music from a party on the my camera mic ch1 .Than I got the song from my Itunes libary same song and lenght . I laying the song on track A2 A3 in fcp having A1 camera mic audio it snyns up for a few secs than goes out of sny or flows out from the camera mic audio that was comming from the party/dj .I do bring in from Itunes in at 48k ??

Why would you expect to remain in sync? Unless the music at the party was played back with a timecode-driven device, and then you used that same music cue, WITH TIME CODE, to bring into your show, you'll never have total sync.
Not to mention that I'll bet you don't have sync rights to use the song...

Similar Messages

  • Audio recorded from lavalier mic is not audible when printing to tape

    hello!
    i am very confused : ( i have an edited work with some audio recorded directly from the built-in camera mic, and most of the audio from a lavalier (lapel) mic. all the audio plays fine from the timeline, and from the "print to video" play back option, when the video playback is set to "none" or "preview"; however, when it is set to ntsc (which i believe i need in order to print it back onto a mini DV tape to submit it) only the audio recorded with the built-in camera mic is clear and audible. the other recorded sounds from the lav mic are very quiet (or silent) and have static noises.
    i have exported the timeline and burnt it to a dvd, and all the audio works fine. but i can not seem to print it to a tape without losing most of the audio.
    i have tried all different combinations of settings (audio to built in audio, or to firewire), etc etc and nothing seems to fix this problem.
    any suggestions would be GREATLY appreciated! thanks : )

    You might try highlighting all the audio tracks
    then go to the MODIFY drop down - AUDIO - PAN CENTER.
    This should make sure all your audio tracks are audible.
    Also, I'm not in front of the interface right now,
    but if you go to FINAL CUT PRO drop down - AUDIO / VIDEO
    SETTINGS, somewhere in there (perhaps in a tab or at the bottom) is a drop down for PRINT TO VIDEO, and there are
    some settings there. Make sure it is including all your
    audio channels and not set up in some funky way.
    Message was edited by: brvideo

  • Sample rate off the audio input and out devices do not match - what to do?

    This is fundamental, I know, but nevertheless I can't find my way around it. I get this error message when trying to recor:
    Sample rate off the audio input and out devices do not match
    and am asked to do this:
    Use the appropriate operating system or audio device control panel to adjust the sample rates of the input and output devices to use the same settingt.
    I have defined the sample rate to 44.1/16 bit in accordance with my inbuild soundcardt.
    I am trying to record from LineIn.
    When running on a M-Audio sound card I don't face any problems.
    HP 8560W, sound card IDT/High definition audio Codec
    Any suggestions?
    Knud
    Copenhagen

    You're sure you have set BOTH the input and output settings to 44.1 16 bit?
    Which version of Windows are you running?  There are a number of posts on this forum about how to fully access both the Windows Mixer and the Mixer for your soundcard.  Especially, you need to ensure that all "Windows Sounds" are turned OFF.

  • I accidentally deleted a folder of music from iTunes.  I have Match, and now it seems deleted from all my devices.  How can I get it back?

    I accidentally deleted a folder of music from iTunes.  I have Match, and now it seems deleted from all my devices.  How can I get it back?

    Were you in iTunes or the Finder? If you were in iTunes what exactly did you click? You say "a folder" but the only "folders" in iTunes contain Playlists and deleting a playlist will not delete tracks from the iTunes library.
    When you deleted the music were you prompted to delete the tracks from the cloud? If so, did you do so?
    Were you prompted to move the files to the Trash. If so did you do so? If you did have you emptied the Trash?

  • HT204406 How do you transfer music from your ipod to itunes match?

    How do you transfer music from your ipod to itunes match? I recently bought itunes match and it wont allow me to add songs from my ipod to the music library and match. Before I bought it, it would not allow me to transfer it either. After my purchase, I thought it would solve the problem but it did not. Any solutions?

    You can't do it from an iPod, you can only do it from your computer's iTunes
    http://www.apple.com/itunes/itunes-match/
    http://support.apple.com/kb/HT4914

  • How can I delete some music from my iCloud but not from my iTunes in my computer? please??

    how can I delete some music from my iCloud but not from my iTunes in my computer? please??

    iCloud doesn't store your music.

  • When i download music from internet it is not shown in my phone's music library....what should be done to fix this?

    When i download music from internet it is not shown in my phone's music library....whenever i want to listen that music i have to open that application through which i have downloaded it. What should be done to fix this?

    you can only get music to work if
    1. it was downloaded on the itunes app in the iphone
    2. it was synced from itunes on a computer
    downloading files does not work

  • My photos from camera row are not going all to photostream in any device, iphone 4s and ipad mini What can I do, please.

    My photos from camera row are not going all to photostream in any device, iphone 4s and ipad mini What can I do, please.
    Both devices have the Icloud on.

    Try this on All Devices...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • How do you delete albums from an I-phone 4,only able to delete from camera roll,but not the other albums

    How do you delete albums from an I-phone 4,only able to delete from camera roll,but not the other albums

    How did the photos get onto the phone ? Only photos taken with the phone or saved from emails/websites etc can be deleted directly on the device. Photos that were synced from your computer are deleted by moving/removing/de-selecting them from where they were synced from on your computer and then re-syncing.

  • OB048 - ED Status from valuation type does not match ED Status handling type TE

    Hi,
    Good day!
    We have experienced an error message (# OB048) indicating that ED Status from valuation type does not match ED Status handling type TE.  I have already checked configuration under Tariffs, Duties, and Permits of the Industry Solution Oil & Gas (Downstream) and the following were in order:
    1. Excise Duty Group
    2. Excise Duty Status
    3. Set Handling Type
    4. Set Pricing Indicator
    5. Maintain excise duty/tax status/account determination
    6. Maintain handling type/tax status
    May I know what can be the solution to this error message considering that the above configurations were already accomplished.
    Thanks in advance.
    Regards,
    Vensim
    Note: Attached is the file with screenshots of the error message. FYR.

    EdStevens wrote:
    856483 wrote:
    <snip>
    can i have you mobile contact phone number if possible?
    I have seen some pretty astonishing requests on this board, but this one really raises (or lowers) the bar. Just what is it your boss is paying you to do?
    Some listserves have lots of people giving their number. I find it odd that people would, but not astonishing for someone to ask. Outside the norm here, but how would someone know ahead of time? It's a bravely connected new world.

  • When I download my i tunes music from computer it does not keep my greatest hits albums from certain artists together it scrambles them with other artists is this because of the way I have my music library on my computer set up.

    When I download my i tunes music from computer it does not keep my greatest hits albums from certain artists together it scrambles them with other artists is this because of the way I have my music library on my computer set up.

    See Grouping tracks into albums.
    tt2

  • How do i move music from iphone to pc - not all downloaded from itunes store?

    how do i move music from iphone to pc - not all downloaded from itunes store?

    iTunes includes an option to transfer content that was purchased from the iTunes Store from an iPod or iPhone, but this is for content that was purchased from the iTunes Store only.
    With your iPhone connected and without syncing, at the iTunes menu bar go to File and select Transfer Purchases From - the name of your iPhone.
    This is one of the reasons why maintaining a backup of all your important data (including your iTunes library) stored on an external drive used for backup purposes only, or on other media such as CD or DVD is so important.

  • Music files from zune (pc) does not match info whe...

    why is it that in the zune software the music artists does not match the lists from my collection (pc) to the contents in the phone, this is getting frustrating.
    in my computer there are a total of 264 artist and over 400+ songs. but checking the phone 52 artists only appear, though the songs are there but all the others excluded from the 52 artists are classified as unknown.
    i have manually edited it from my computer and from zune as well. so its impossible to have missed labeling the artist etc etc. any help here?

    Whaaaaaat...???????
    It is not compatible?  How do i transfer my music, pictures, videos.???   Cant beleive it..!!
    HELP HELP

  • How do I make two audio clips from different mics sound the same in premiere?

    I have a video I am working on. we used two different mic and camera options. One is a lavaliere mic that was too hot and picked up a lot of fuzz, and the other was an on board mic that was just a little echoey from the office walls. I found that some clips were better on different versions. so I want to put the two different sets next to each other in video and make the sound be the exact same. That way no one notices the differences in audio.
    Any help is appreciated.

    Hi. Although not perfect, I'd add an audio mixer effect and adjust the highs, mids & lows on both of them to help their audio, respectively, sound more similar. Often when I shoot, my Boom mike (backup) is much fuller sounding than the lavs. are. Lavs are inherently lacking in the low end, and the boom is often too hot on the low end. So I would add Audio Mixer effect, and lower the low end on the boom slightly, and highten the low and mids just a bit on the lavs. Even taking a little highs off the lavs makes it sound a bit more like the boom. 
    As far as echo is concerned, you probably can't do to much about that unless you have an external graphic equalizer/limiter. Lot's of times I just add  some music in the background, which helps a lot to hide echo from the mics.
    Finally if you tape/record/film in a location that has lots of background noise like, background people, cars or rain or wind or general white noise "hiss", then you should record a minute or two of the location without any dialogue. This is is known as "Wala" recording. You can add a little of this to your whole track, or just on the mike track that doesn't seem to pick up the ambient sound, thus making it sound more like your other mike.
    I hope this helps.

  • Need help Syncing audio/music from my computer with Vista to my Palm Centro....

    When I use Windows Media Player 11 that came with my computer and attempt to load/sync music from the computer to the Centrol into Ptunes v4.0 I get an error message on the computer screen stating the version I am using is not compatible.  I have also tried Windows Media Player 10 and it also states not compatible.
    Help, I need a fix.  Anyone able to help me?
    kd302
    Post relates to: Centro (Unlocked GSM)

    Hello kd302 and welcome to the Palm forums.
     I don't use Windows Media Player, but I was under the impression that to use WMP 11, you needed to upgrade Pocket Tunes on the Centro.
     The NormSoft knowledge base can be found here.
     I would use the check for updates feature in pTunes on your Treo to see if there is an update available for your install of pTunes 4.x.  To do this, open pTunes, and select Menu > Help > Check for Updates...
     I'm running version 4.0.7 on my Treo 755p and I know that version 5.0 has been relesed for Palm OS devices.
    Alan G
    Message Edited by AlanG on 07-20-2009 09:19 PM

Maybe you are looking for

  • Verizon representatives are committing fraud!

    I currently have my line with a smartphone and two other lines both with basic phones, my mom's and my grandmas. Both basic phones will never need a smartphone due to the complexity. I have been a Verizon Wireless customer since my first cell phone a

  • How to block task bar notification for a specific program?

    Hello all.  We are rolling out a new web based program that uses a thin client.  This thin client checks the server on a regular interval.  If it finds a new version of the thin client, there is an alert in the Windows 7 task bar.   The problem with

  • How to populate custom fields for Outbound delivery header (LIKP)

    Hi All, I have added one field in the structure LIKP using APPEND structure. Now want to populate this field from a batch program. I have delivery number. Is there any API or BAPI. I already tried using the FM BAPI_OUTB_DELIVERY_CHANGE by populating

  • Workflow starts only when initiated by specific user

    hello, Workflow starts only when initiated by specific user...need to get started  who ever initiates it.... any help would be appreciated !!! Thanks regards, Vignesh.

  • How to install .pfm Fonts on Mac?

    Is there a way to convert the .pfm PC Type 1 font files I have purchased so they can be used on my OSX Mac? I need to use the font in Photoshop CS4 but it's not showing up after copying to HD>Library>Fonts folder. Thanks.