Audio needs to be rendered every time

I did a project this week which required me to change my sequence settings to PAL, 44.1KHz audio. I since changed back the sequence settings to easy setup DV NTSC, so I shouldn't have any problem with new sequences. Even so, any time I drop a QT movie into a new sequence, the audio needs to be rendered just to hear it. These are movies that play fine in QT. They are DV-NTSC movies with the audio rate at 44.1KHz. The latest is a project from iMovie; the audio rate on that project is 32KHz. Any setting suggestions so that I no longer need to render every imported clip?

I understand. I have the sequence settings at easy setup NTSC. When I bring in CD tracks, they are 44.1kHz and I recognize that they will eventually need to be rendered, but they should at least play and not give me a red bar.

Similar Messages

My tabs will not restore after starting Firefox -- even with the option to restore my tabs and windows is checked in the "options" window. I'm losing tabs from previous sessions that I need to keep open every time I need to restart. Thanks for any advice!

Is there something else I need to tweak to get rid of this annoyance instead of simply clicking the check box? I'm losing tabs from previous sessions that I need to keep open every time I need to restart. Thanks for any advice!

Make sure that you do not use Clear Recent History to clear the <i>Browsing History</i> when you close Firefox.
*https://support.mozilla.com/kb/Clear+Recent+History
It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the sessionstore.js [2] file and possible sessionstore-##.js [3] files with a number and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
See also:
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js
* [3] http://kb.mozillazine.org/Multiple_profile_files_created

HT1414 why does my iPhone 5s shut down unpredictably and needs to be reset every time to start back up?

why does my iPhone 5s shut down unpredictably and needs to be reset every time to start back up?

Hi Cyprus11,
Thanks for visiting Apple Support Communities.
If your iPhone is shutting down unexpectedly, I recommend going through these troubleshooting steps:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Best,
Jeremy

White keyboard needs to toggle power every time computer is started

I need to toggle power every time computer is started. OSX doesn't 'see' the keyboard when restarting or starting.
ALSO
When running XP in bootcamp, I can get XP to 'see' the keyboard, but I can't get it to work at all.
Please help.

Hello tak:
I am assuming your Bluetooth module is built-in.
There is no software setting to address what you describe. The KB may have a problem. However...
Instead of switching the device on and off, try tapping a key or two.
Try installing new batteries and/or removing and reinstalling them.
I do not run Windows (and never plan to do so) so I have no feedback on the XP issue.
Barry

I need more storage but every time i try to buy it says payment method declined however i can buy any app from the app store with the same method

i need more storage but every time i try to buy it says payment method declined however i can buy any app from the app store with the same method

Make sure there is enough funds for storage. Contact your bank and verify they are not stopping transaction.

Ever sense I updated Safari, I need to log on every time I visit a forum, what happened?

Ever sense I updated Safari, I need to log on every time I visit a forum, what happened?

Open Keychain Access located in /Applications/Utilities
Select Passwords on the left.
Use the search field top right corner of that window to find the MLB keychain. Now right or control click that keychain then click Delete.
Now in Safari go to the Safari menu bar top of your screen, click Safari > Preferences then select the Autofill tab.
Make sure User names and passwords is selected.
Navigate to the MLB site (forums), login with your user name and password. You should be prompted to save that data to a new keychain. Click Yes.
Sometimes keychains can become corrupted and need replacing. The next time you revisit that site you should not have to enter the password.

ALSA audio problem (need to run alsaconf EVERY time!)

Hi there I've been messing around with Arch for a lil while now and it works great and all for me but I'm dealing with one problem that kind of ticks me off - I have to run alsaconf every time when I boot up my machine. I tried it as root, user, with sudo.. nothing.. it just resets everytime to such low levels that I have to krank my amp all the way up even with all aumix levels maxed out.. what's going on here? Does anyone have similar issues? How can I fix this?

> I tried it as root, user, with sudo.. nothing.
Have you tried reading the wiki?
http://wiki.archlinux.org/index.php/Beginners'_Guide#Step_1:_Configure_sound_with_alsamixer

IPod needing to be restored every time plugged in

I have had my 120 gig iPod classic for a little under a year. I updated my iTunes and now, every time I plug it in, it needs to be restored. Once I restore it, it is fine, takes a million years to reload all of my music and is fine until the next time I plug it in. I have tried reinstalling iTunes and the same problem still happens. Can't figure it out. Any advice would be greatly appreciated because I don't live anywhere near an Apple store.

Doublechecking something known to cause those symptoms.
By any chance, do you have a copy of WinAmp installed on that PC?
If so, try slim's suggestion from the following post:
http://discussions.apple.com/post!reply.jspa?messageID=11170851

My bluetooth needs to be paired every time I start the car

can anyone give me any help with the problem that my new 3G iphones needs to be unpaired and paired again every time I start the car (Range Rover). My original iphone (once paired) connected automatically each time. Has the bluetooth way of working changed on the 3G. Any advice appreciated.

The bluetooth stack of the iPhone 3G is not working. if you check on the www.bluetooth.com web site, iphone 3G IS NOT APPROVED for bluetooth compatibility ...
After debugging, I found that the L2CAP of the iPhone 3G is not answering properly the Bluetooth request from the hand free profile.
Apple should not advertise bluetooth 2.0, they are not compatible.
PS: the admin deleted my previous post, explaining the detal about it.
Is Apple aware of the problem?
<Edited by Moderator>

My iMac needs to be rebooted every time I put it to sleep

My iMac needs to be rebooted almost every time when I wake it from sleeping. Is this normal? Ether the screen darkens and it will tell me to reboot by holding down the power button or the screen is just totally blank. It's been doing it for a long time and I thought it was just mac security updates running in the backgrownd or something but it seems to be getting worse.
Thanks

Do this:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.

Mail needs to be restarted every time I awake my computer from sleeping,

Every time I awake my computer from sleeping, Mail needs to be restarted.
Why's that?
The problem is that if I'm not aware of i it, my Mail stays offline.
Any help?
Thanks
Nico

This is a bug that doesn't affect everyone. I can't reproduce it and I don't know what triggers it. The following steps have been reported (but not confirmed by me) to work around it in some cases:
Turning off Dictation
Turning off the built-in firewall
Turning off the Energy Saver setting to allow hard drives to spin down when idle
Changing DNS servers
That's all I've been able to find out.

Time Capsule needs to be reset every time I print wirelessly or watch Apple TV

Hello all!
My Time Capsule keeps dropping my wireless printer and Apple TV. Every time I want to stream a movie to my Apple TV it needs to be reset, and everytime I want to print wirelessly it needs to be reset. However, my internet connection remains constant and never has any interuptions.
Please help, it's getting really annoying to run upstairs to reset the time capsule every time I wanna watch a movie.
Thanks

It is reported here all the time that the TC needs daily reboots.. you are highly fortunate that it is only weekly..
The fact is the old TC using 7.5 firmware was probably hugely more reliable than the current one which is not able to be flashed back beyond 7.6. There is a bug.. and as yet no Apple confession of issues.
But most people can get away without a reboot.. you just need to disconnect all users.. which was an option in the v5 utility.. now left out of v6.
Strongly recommend you install v5 utility.
(Or get electrical timer to restart the TC on a nightly basis).
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0
Most common message in history of the TC.. something has failed to unmount.. Lion and esp. Mountain Lion are affected.
Simple way.. reboot the TC to lose the connections..
Might take a network reboot.
But from 5.6 utility you can disconnnect all users.
Read C12 here. http://pondini.org/TM/Troubleshooting.html

Rendering every time I add a clip?

Hello,
I am puzzled why I have to render my sequence every time (if I want to see it in real time) after I added it to the timeline. This happens with ordinary dv, 29.97 clips, audio clips etc. Does it have to do with preference settings somewhere? Do you have recommendations to optimize editing? I have selected "unlimited RT" to avoid the nasty "red bar" at the top, but still have to render it to see it in real time on an NTSC monitor.
Thanks,
Jordan

In my employment contract; section C, paragraph 2, sub-para f states: "If settings of said aforementioned system are not returned to the exact state to which the party of the first part (aka ME) left them, the party of the first part is indemnified against any prejudicial outcome from stomping the crap out of the party of the second part (any one else) who screwed up said aforementioned system."
If you do not have such language in your contract, you should think about getting it included in the next re-negotiation. The piece of mind it generates is enormous.
x

My Windows 2012 ISCSI Target service needs to be restarted every time the server starts.

Every time I restart my Windows 2012 server, the ISCSI Target Service is unavailable to the clients even though it appears to be running.
I have to restart the service, then the clients can connect to it.
I tried to change the startup Type to Delayed, but I get an error 87: parameter is incorrect.
I've tried to delete and recreate the VHD and ISCSI Target.
I've tried to uninstall the Role, and reinstall it.
Anybody have any additional ideas to try and troubleshoot this?
Thank you
James Roper

The service is not starting correctly, even though it does start. If I restart the service, everything works correctly. Here is the event in the ISCSI Target.
Log Name: Microsoft-Windows-iSCSITarget-Service/Admin
Source: Microsoft-Windows-iSCSITarget-Service
Date: 5/8/2013 3:11:10 PM
Event ID: 10
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: SRV-ISCSI1
Description:
The Microsoft iSCSI Software Target service could not bind to network address 10.5.4.31, port 3260. The operation failed with error code 10049. Ensure that no other application is using this port.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-iSCSITarget-Service" Guid="{13953C6E-C594-414E-8BA7-DEB4BA1878E3}" />
<EventID>10</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-05-08T22:11:10.899843800Z" />
<EventRecordID>38</EventRecordID>
<Correlation />
<Execution ProcessID="976" ThreadID="1448" />
<Channel>Microsoft-Windows-iSCSITarget-Service/Admin</Channel>
<Computer>SRV-ISCSI1</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="IpAddress">10.5.4.31</Data>
<Data Name="dwPort">3260</Data>
<Data Name="Error">10049</Data>
</EventData>
</Event>

Changes made on firefox arent registered and need to change again every time firefox restarts.

Since I installed firefox on my new PC nothing seems to register. Every time I start it, it wants to give me a tour like the first time I installed it. Fond size on same pages change every time I open them. Change of the home page doesn't register, meaning after I change it on the options it will not remember it next time I restart the program.
On top of that, even though its shows that I am signed it for syncing, it actually does not sync anything from my older PC.

It could be the work of one of your add-ons, or even add / mal-ware.
Look thru your add-ons list and make sure you know what each one is
and what it does.
Some added toolbar and anti-virus add-ons are known to cause Firefox issues.
Open the '''Add-ons Manager <Control><Shift> A''' and '''disable All of them.'''
Also, check the programs that are on your computer
'''Windows:''' Start > Control Panel > Uninstall Programs.
'''Mac:''' Open the "Applications" folder.
'''Linux:''' Check your user manual.
Go thru the list. If you find something that you don't
know what it is, use a web search.
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-caused-malware Troubleshoot Firefox Issues Caused By Malware]''' {web link}

Audio needs to be rendered every time

Similar Messages

Maybe you are looking for