Audio not appearing in Audio track

When I drag a clip from the viewer, I don't see audio in the audio track, but the video contains audio. Somehow they are not linked together. How can I bring video/audio together?

Also make sure your edit buttons look like this and you don't have video only selected.

Similar Messages

  • Audio track not playing back (appears greyed out)...

    I just recorded a bass part and the region appears in the track with Audio Data but doesn't play back within the context of the song (arrange window), but does play when I double-click the region and scrub through the Audio window. The region appears greyed out in the Arrange window. It's really weird because everything else plays fine including loops I am using in the other Audio tracks.

    Sounds like the region may be muted. Try using the mute tool and click on the region to unmute (or select the region and type 'm' on your keyboard).
    Hope it helps...
    jord

  • Audio appears on two seperate Audio Tracks but they are not routed together

    Hi folks,
    Sorry for this, I have done a search of the forum but couldn't find what I am looking for answer wise so I need some help.
    1. I load up an Apple loop onto track one
    2. I then create a new audio track
    3. I then load a new Apple loop
    When I load the second Apple loop, the first one not only plays through audio track 1's output but also audio track 2's output.
    If I solo the second loop I can still here the first.
    Any ideas?

    If I solo the second loop I can still here the first
    Aside from what Sam said, it's also possible that you have soloed loop 2 while playing loop 1 in the Loops browser. The solo in the Arrange track will not silence what might be playing in the Loops browser.

  • Audio Tracks do not have sound?

    I opened one of my Garageband projects in Logic and found out that none of my audio tracks have sound when played. The software instruments work just fine, and nothing is soloed or muted. Pretty sure audio is routed to the right output as well. What am I missing? I am new to Logic so I don't have it quite figured out yet.

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Can't edit audio line - it will not appear

    For some reason my edit line will not appear in the audio track. I can't fade down or out the audio tracks downloaded from my iTunes library.
    Note: This is just one of the problems I've had since installing iLife 08. I did not care for '08 and deleted it but I believe parts of it still lingers somewhere.
    I will only use my version 6, but can't go further with four 'in progress' movies.
    Harold

    Phone EE to delete you old a/c. Then you will be able to create your new 1. Stupid, innit? They can't do this auto when you upgrade.

  • Quicktime Video Conversion Not Preserving Multiple Audio Tracks

    Hi All,
    I'm trying to convert a H.264 video file to a ProRes MOV using quicktime pro 7.
    This is a video file that was created using Handbrake.
    In Handbrake I am able to rip several audio tracks from a VOB. In this case I need to rip both the 5.1 audio and 2.0 audio. Instead of splitting this up into separate exports, I can attach both audio tracks to the H.264 mov. I can view and edit them in the Properties window of the video in quicktime.
    So what I'm starting with is a video file with two Audio tracks:
    5.1 Surround: C,L,R,Ls,Rs,LFE + 2.0 Stereo: L, R
    What I'd like to do is unite the two audio files to create an 8.0 track: L,R,C,LFE,Ls,Rs,Lt,Rt
    By changing the naming of the stereo track from L,R to Lt,Rt in the properties windown, an option appears in the audio export settings to use the SMPTE DTV audio output (L,R,C,LFE,Ls,Rs,Lt,Rt). But when I use it, assuming it will recognize my naming structure and rearrange the tracks according, the export results in a stereo file.
    What am I doing wrong?? All logic makes me assume that this should work...
    I should note that when I open the H.264 in quicktime the 5.1 audio track is not enables (or clicked on) in the properties tab. I must turn it on for quicktime to recognize it in the inspector window. However, when I try to save the video it requires me to save my file in an MOV container.
    When I try to simply export the file as a 8 discrete channels, it will export with 8 channels, but the first two are a stereo pair and the other 6 are silent tracks.
    The only way I've found to keep these audio tracks together is to extract each audio unit separately (5.1 and 2.0) and then add one of the audio tracks to the other using the copy and "Add to Movie" feature. This is not my preferred workflow since I'd like to keep the audio and video together. I'm creating a workflow that will be repeated several times so the more I can streamline this process the better.
    Please help. Any ideas would be great.

    I don't think Quicktime Pro is able to export individual audio tracks.  It sounds like Handbrake create an AC3 sound track and a 2.0 channel stereo track.  I don't think iMovie will handle multi-track audio and Final Cut Pro X won't let you assign audio channels to individual outputs.
    If you have the original VOB file, DVDxDV Pro will break it out to individual audio channels into separate AIFF audio files which you can then import into Final Cut Pro 7 and remix the audio that way.

  • I can't get the audio Playhead menu to appear so I can trim an audio segment in a secondary audio track.  I see others are having Trimming Issues, but I can't even get the menu to appear.....

    I need to trim off the front and back of audio segments (pulling from iTunes)
    The instructions seems quite clear on how to do this, but the Playhead Control does not appear when selecting and item in the secondary audio track.  It seems pretty basic, but how do I even get the Playhead to appear?
    I'm in hurry to finish a slideshow for a wedding (why I bought it to begin with) - any help will be appreciated.

    That's the for the secondary track.  But how do I trim the primary audio song from itunes.  I did find a work around. 
    select  the song in itunes.
    command + I to get the information screen.
    Under one of the tabs there is a "start" and "end" timer.  Trial and error will put allow you to start and stop at the time specifed.
    I renamed it " trimmed" so I knew it was a timmed version...then I inserted it into aperture the normal way...
    A pain, but it works...

  • Monitor audio tracks not currently being captured?

    While logging and/or capturing, I would like to be able to hear what's going on in an audio track I have not currently selected for log or capture. This way, I can keep an eye -or rather ear- on whether the sound man added a second mic between takes or something interesting has developed with the boom audio.
    It appears as if I can only monitor what I've selected to log or capture in the Audio portion of the Clip Settings tab of the Log and Capture tool. Is that true? If I think I don't want it, I don't get to hear it?
    Martin

    That is the FIREWIRE feed. There are still audio outputs on the back of the deck. If there are more than two, you are in luck. If there aren't, then SOL.
    Shane

  • Audio track will not record - picture is fine PE9

    PE9 audio track will not record. Tried in several projects - audio gets through to computer - but the audio is not being recorded. Help please.

    Hi ATR
    Was transferring a client's DVD-R into my Adobe PE9 to do some editing requested by client.
    The audio from the DVD was coming through clearly on my computer speakers but when I finished tranferring I stopped recording and discovered the video track was fine but there was no audio track.
    Tried recording said DVD into some of my other files on PE9 but same thing.
    Since posting my cry for help I uninstalled PE9 and reinstalled it.
    This appears to have fixed the problem as I am now transferring client's DVD-R once again.
    A quick check after a few minutes revealed the audio track is now being recorded with no problems!
    Thanks for your interest.
    Kind regards
    David

  • FAQ: Why does audio or video not go to the track where I drop it?

    (Premiere Pro CS5.5, and earlier)
    See this video:
    Why does audio not go to the track where I drop it?

    Premiere Pro CS6, and later
    Update
    We have Standard Tracks as the default audio track type for most sequence presets in Premiere Pro CS6, and CC so the situation described in the above video does not happen too frequently any more.
    A related issue does happen with frequency, however:
    Issue
    Some users have trouble dragging a clip into the Timeline with audio. Only the video or audio portion of the clip appears.
    Solution
    Make sure video and audio is patched in the Timeline, then drag the clip to the Timeline. In certain cases it is not automatically patched.

  • I've been using Ringtone Maker to add ringtones to my iPhone. The app is now telling me my music I bought from the iTunes store is not exportable. I downloaded a new app called Ringer and it says my song "has no audio tracks". What am I doing wrong?

    I've been using Ringtone Maker to add ringtones to my iPhone. The app is now telling me my music I bought from the iTunes store is not exportable. I downloaded a new app called Ringer and it says my song "has no audio tracks". Wha am I doing wrong??

    never mind.  i think it just makes you review the information -- it looks like you have to click through everything.

  • When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    Hi Brian,
    Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
    Thanks for your help though!
    Pernille

  • How do i get itunes to play in 5.1 on windows, 5.1 works on everything else on my comp, blueray,dvd,games... just not itunes. even though the things i am trying to play have a 5.1 audio track.

    on the files that have multiple audio tracks the option to switch pops up but i am unable to select it.
    i've tried talking to an apple tech at an apple store, independent tech at mac dealer, i have spent countless hours surfing forums, and even managed to talk to some condicending jerk at an apple customer service number"just because you spent a lot of money converting you're media to itunes doesn't mean you get support" i was told "  aslo while in itunes looking at where the option to go 5.1 is i was told" there is nowhere in itunes to set that setting" i'll mention again i had itunes in fullscreen and was looking at the damm option while he said that.
    feeling really ripped off here bought system for media and would have been better off buying dvds
    spent about 3 hours last night surfing forums, took a few hours to find a number at apple where i could talk to a real person just to be brushed off.

    i just tried disabling adblock and checking if i had any no script or noscript sort of addon. i do not have a script killer. disabling adblock did not solve the issue.

  • Audio Tracks will not play

    Hi there,
    I'm using FCP 7 for a project that was originally edited in Final Cut 6 (I had to switch to 7 because BOTH my computers at home have crashed today which use FCP6, now I'm up at my office and have to use 7 - bad day, I know).
    I'm trying to do some sound edits and only one audio track is playing (tracks 3 and 4) which are the source audio from the XDCAM Footage (note, these tracks have not been soloed - if that's a word). All my other tracks are not working. When played they produce no sound, but the audio meters to the right are moving. When played in quicktime, iTunes, or Finder they do indeed still work.
    Audio Output has been set to Default, though I've also tried Built-in Audio Output. I'm using headphones, but it also does not play through the computer. I've also tried speakers. All other audio on the computer is fine - my volume is up.
    Sometimes I can get tracks one and two to play after re-rendering.
    RT is set to Unlimited, but it also doesn't work with Safe RT.
    Any insight into this issue would be much appreciated!
    Thanks

    Go to Sequence Settings...then the AUDIO TAB. How many tracks of audio do you have? More than 2 and STEREO?
    If you right-click on the track patch area on the timeline, you can assign these tracks to audio ouputs...are they set to anything other than 1 or 2?
    Shane

  • Importing a project into PE 12 trial version, not all audio tracks play back!

    I'm trying the trial vesion of PE 12.  Imported a project that I had created with PE 9.  Everything appears to have been imported, including all the audio tracks.  But when i play it back, some of the audio tracks are completely muted, while others, are fine and I can hear it.
    Any idea what can cause this?

    With "muted" Audio Tracks, I would look at a few possibilities, and especailly with a Project created in an earlier version of PrE:
    Open Audio Mixer, and look to see if any Tracks are Muted.
    Play the Timeline, and observe the Levels in Audio Mixer, and also whether there is any movement of the "sliders" in Audio Mixer.
    Observe which Audio Tracks your Audio Clips are, in the Timeline, and report those please.
    Making sure that Keyframe Display is set to Volume in your Audio Clips, are there any Volume Keyframes?
    I am sure that others will have a few more ideas, and questions.
    Good luck,
    Hunt

Maybe you are looking for