Audio not correct

Hi! I have multiple sequences in FCP I want to export to DVDSP. One video is 30 mins. another is 12 mins, and the last is 5 mins. The video compresses correctly, but when I bring the audio in DVDSP it is the audio from the first video. But it is the length of the video I want to use (IE the first 12 min of the 30 min audio). How can I fix this? I'm using the 120 16:9 AC3 to compress. Thanks!

A quick fix would be to select each sequence then Export > Audio to AIFF, then take the resulting AIFF file into Compressor for the AC3 encode. See if that works.

Similar Messages

Length of audio file not correct in Firefox, Safari, and Chrome. Why?

Hello,
I created a mp3 player that loads the file, displays the sound length, and plays the audio file. I have notified that on Firefox, Safari, and Chrome browsers, the length of audio file is not correct. I have uninstalled and installed flash plugin and activex control but no luck. Any ideas why I am experiencing this behavior?
Regards,
Nilang

As a test, try putting an empty JSP in front of it that triggers the session to be created, and then redirects (with a HTTP meta refresh for example) to the frameset jsp to see if that fixes anything.
If that fixes it, then I guess the pages load too quickly.

AUDIO IN EXPORTED MOVIE IS NOT CORRECT!!! HELP ASAP

I have finished editing and making about a 30 minute movie for a project I am working on, when I view the movie through iMovie on full-screen, everything is fine.
When I finally export the movie (No matter how I export it) the audio is not correctly placed.
For example, I will hear the audio from a clip 20 minutes into the movie in the beginning of the movie and a lot of parts of the movie are muted, The audio is scattered throughout the entire clip with no pattern at all. I have no clue what this could be and I need help as soon as possible, I appreciate all responses.
Thank You
Andy

Hi
• Free Space on internal boot hard disk. How much ?
Else read my list
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Delete iMovie pref file - or rather start a new user/account - log into this and re-try
iMovie pref file resides.
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named. *com.apple.iMovie.plist *
While iMovie is NOT RUNNING - move this file out to desk-top.
Now restart iMovie.
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Garageband-fix. Start it, Play a note and Close it. Re-try (Corrects an audio problem that hinders iMovie)
• Screen must be set to Million-colors
• Third party plug-ins that doesn't work OK (not relevant for iMovie’08 or 09)
iMovie updated ?
QuickTime updated ?
Mac OS version ?
• Program miss-match. iMovie 5.0.2, up to Mac OS X.4.11 AND QuickTime 7.4.1 - is OK
• Program miss-match. iMovie 6.0.3 or 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
• Program miss-match. iMovie’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (might work under Leopard)
From LKN 1935. (in this case = iMovie HD (5), I tried it all, but nothing worked.
Your answer (above) has been helpfull insofar as all the different trials led to the conclusion that
there was something wrong with my iMovie software. I therefore threw everything away and reinstalled
iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos)
to my Sony camcorders worked properly as it did before.
Lennart Thelander
I run "Cache Out X", clear out all caches and restarts the Mac.
Yours Bengt W

Audio not working on iPad

I have been experimenting with converting some Flash animations to JavaScript with Flash CC, and so far I am impressed!
One issue I'm having is that the audio plays correctly in the desktop browser, but the audio does not play on the iPad.
Any ideas? Here's a link to one:
http://dev.riverrockcreative.com/clients/hwt/keyboarding/JavaScript_testing/forkliftJS/for klift.html

Thanks for the reply. I am not publishing via AIR or packaging for IPA. I am just trying to convert to HTML5, which creates image, and sound directories. It works fine in desktop browser, but you can't hear the audio in Safari on iPad.
I don't see an "included files" area in the Canvas publish setting, like there is in AIR.

QuickTime movie made in QuickTime 7 audio not playing back in qt 10

I made a qt using qt 7 pro, H.264 with the AAC audio compressor and that qt will not play back audio in QuickTime 10 which is what my client has on his computer.

The point being here is that I rendered out a movie in QuickTime pro 7 and the audio isn't being resolved in QuickTime 10, even on my own computer.
Does the audio play correctly in the QT 7 Player? Have you determined if this is a playback or a conversion problem? I asked about the source file since some source compression formats will not convert the audio using QT 7 Pro. In a similar manner, some AAC data rate and sampling rate combinations are not supported on the Mac which is why QT is programmed to disallow their use. (Unfortunately, I do not know what would happen if a source file using such audio settings were to be used as a source for a QT 7 Pro conversion.)
How is this possible and should I just remove qt10 altogether?
As already indicated, there are a number of "normal" problems that could give these results. In addition, QT changes made as part of the most recent Lion OS update seem to have had adverse effects on QT 7 Pro features (as evidenced by the loss of the "loop" playback feature and "green screen" problems on some platforms). As to the removal of QT 10, the embedded structures cannot be removed without corrupting the operating system. And, while the QT X player can be removed/deleted, why bother since you can just as easily opt not to use it for manual playback and restoring it, should you later change your mind, may present a problem.
I am a professional editor, have been working on Macs since 1992 (Avid and FCP7) and have never had a compatibility problem like this before within the Mac environment.
Have you made any recent changes to your normal work flow that might account for this problem and is the problem consistently repeatable?

I am using elements 10 and only getting audio not video. Can anyone please explain why? I am a total newbie to video.

I am using elements 10 and only getting audio not video. Can anyone please explain why? I am a total newbie to video.

greenfrogstone
Just saw your thread, and it looked like a candidate for the Premiere Elements 10 NVIDIA GeForce Roll Back the Driver issue. If your computer uses a NVIDIA GeForce video card/graphics card, then the following applies to you. You do not want to update the driver. Rather you want to roll back the driver version, probably to about May 2013. For your convenience I have done a copy/paste of the forum announcement which gives all the details and fix of the matter.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
This matter has been very specific to the Premiere Elements 10 NVIDIA GeForce card user. So, if your computer is using other than a NVIDIA GeForce card, it is likely that the message does not apply to you, and we can then explore other troubleshooting possibities.
Looking forward to your follow up. Do not hesitate to ask for clarification on anything written here.
Thanks.
ATR

AppleTV will only play audio, not video

My AppleTV will only play audio, not video via Airplay. I've verified correct settings, reset iPad, AppleTV and router with no success. Please help!

Welcome to the Apple Community.
What is it that you were playing, some providers block their content from AirPlay.

Audio not working on one slide when publishing to HTML5

I'm in Captivate 8. In one slide in my project no slide audio will play when published to html5. I've tested in Chrome and IE 11. In Chrome, I see the 'speaker' icon that appears when audio or video is running but no sound comes up. (The speaker appears for the length of the audio file ~5 sec) All other slides are fine, and the slide audio plays correctly if I use F3 or F10 to preview the slide inside Captivate.
The slide in question is a 'menu' only reached via an advanced action. I know the advanced action is not the culprit - if I change it to jump to a different slide, the audio on that slide plays without problem.
Similarly, I've verified that if I place this audio file on a different slide, it plays fine, but if I add a different audio file to this slide the problem remains. If I create a button on the problem slide to trigger the audio it plays, (but is unhelpful since I want the audio to play automatically when the user enters the slide).
I've tried removing/re-adding the audio, recreating the slide from a copy, setting the audio to play via an "on enter" advanced action, and adding a play trigger to the advanced action that jumps to this slide. Nothing I've tried gets the audio to play.
I'd welcome any suggestions of what might be happening or how to fix this.
Thank you,
Jenny Nilsson

Hi Lieve,
Thank you, yes, if I view using f12 the audio works correctly.
The "exitBranch" action is associated with a continue button at the end of each branch. If all branches have been visited, it jumps to a new slide, if there are unvisited branches, it jumps back to the menu slide where the audio is not working. (If I edit the action to jump somewhere else the audio will work for the different slide.)
The action was created from a shared action and my colleague and I have used it in multiple other modules without this error.
Thanks,
Jenny N

Audio Note Failure?

I am not able to use my audio note on whatsapp post the ios 7 update.It says failed to save the audio note.When i used ios 6 i had no such issues.Its also quite baffling seeing my friends using ios 7 having no issues with this.
So any suggestions to rectify it?

Go to settings-privacy-microphone and turn whatsapp slider on. Voila
Read more: On the iPhone5 I`m getting error failed to save audio note on whatsapp? - On whatsapp I tried recording and sending an audio note but I`m getting a message that says error failed to save audio note. How do I correct this? :: AskMeFast at http://www.askmefast.com/On_the_iPhone5_Im_getting_error_failed_to_save_audio_no te_on_whatsapp-qna7276397.html

Audio not synching during publish

Hello everyone. I'm working in Captivate 4, (purchased, not
trial). I'm relatively new user, but have been working intensely
for about a month developing my tutorial.
My project previews correctly, (entire file is 117 slides, 9
minutes long.)
However, after publishing to an AVI file, the audio does not
match up with the video - the audio playback is slightly slower,
and after 2 minutes, has lapped the slide.
I tried different publish settings, but have not found
anything to work, although changing some settings have improved the
output somewhat.
Does anyone have any suggestions for me?
This file will be published on YouTube. This is a
demonstration video only.
My audio was developed using text to speech, (so no music
quality sound is required) and each slide has one audio file per
slide, (nothing embedded.)
Settings I chose were:
Video Format: MJPEG Compressor (tried Indeo, but syncing was
worse)
Audio: PCM (only choice)
Encoding: FM Radio (64) and 11.025 KHz Frequency
Encoding Speed 5
I restarted, and do not have any other program actively
running (except Kasperski)
We recently reformatted the hard drive on this machine, took
every program off, defragmented, so the system is very lean and
clean.
Added more memory, so now we have 3 GIG of memory.
Running XP, the only installed programs are MS Office,
Kasperski, and Captivate.
Any help would be greatly appreciated!
Thanks!

Sorry everyone, I posted this in the wrong forum.
I reposted this in Captivate - General Discussion, titled
Audio not synching when published.
I did not know how to delete this post. Thanks!

Exporting video holds on the second 'clip', but audio exports correctly

i'm exporting a project from imovie, i have a number of clips in there (which was originally a single video, but split up) and an audio track. when i first exported it as 'web', it worked fine, but when i tried to increase the quality settings via exporting to quicktime, it exports video up until the end of the first clip, and then just holds on that frame until the end of the video. the length is correct, and the audio exports correctly, but the video is just still.
any thoughts?

EmmaBean
What version of Premiere Elements and on what computer operating system is it running? Have you created the narration in Premiere Elements
using the Narration Tool? Do you have the problem in the export if you move the narration clip to one of the numbered Audio Tracks before export?
Are you using the SmartFix feature in this project? If so, have you checked your background foreground settings?
But, before that, is the sound on all the audio tracks OK when evaluated in the Edit area? Is the sound a problem only in the export?
If you are having sound problems in the Edit area before export, are you adjusting the volume while viewing the Audio Meters
typically found under Window Menu/Audio Meters.
Let us start here and then decide what next.
Any questions, please do not hesitate to ask.
Thank you.
ATR

Teleconferencing app - Video/Audio not synced

I have a Flex based application which is using Flash Media Server (FMS) server (version 4.0) for live video streaming between two users (i.e. a one to one teleconferencing service). This streaming is one-to-one, as defined by business rules, so that no third person can join a teleconference. Either person can start the video stream via a browser-based Flex client and communication gets established once the second user joins. Validation for connecting the streams of the two users is implemented on the FMS server (as server side scripting defined in main.asc).
Almost every teleconference has video/audio sync issue of anywhere between 2-10 seconds (i.e. the audio and video feeds are not synchronized).
Question - any suggestions on how this can be corrected, either client or server side?
Thanks for the ideas...
Jonathan

Re: Video/Audio not synced when viewing on computerT I'm using the HD+ mode and it is in synch. After more playing around I noticed that I sometimes experience the stop motion but then it quickly returns. It only happens when I have other programs open. If I close all programs and just have open the video, it works well. Again, this is a limitation of my computer power.
Try this... Open up the Task Manager and then play a video. See how much of the computers power you are utilizing when the video plays. Look at the processes that are open and close anything you don't need. Most people have too much stuff running in the background on their computers that slows it down. They usually come preloaded from the manufactor that way. I have set up my computer so that nothing runs automatically when you start-up. It makes the computer much faster.
Also, are you running Vista? Vista is a memory hog. Try messing around with Vista's settings. Vista can limit your computer power. With your computer power, you shouldn't be having such a problem. Maybe switch back to XP.

Audio not working on channel 5 and 7,, okay on all others????

audio not working on channel 5 and 7,, okay on all others????

dalharris wrote:
audio not working on channel 5 and 7,, okay on all others????
Without knowing all of the specifics in your situation, you may want to try these options:
- If you have a DTA, and your remote control has a LANG button on it, press it.
- If you have an HD or SD full cable box:
Most low or no audio issues can be corrected by setting the Optimal Stereo output of the cable box. Here are the steps: Press the Menu button twice on your remote control. Select Setup. Select Audio Setup Under the Optimal Stereo setting, choose "Select to Optimize" and press OK/Select on the remote control
- The audio settings on your cable box may have accidentally been changed:
Press the Menu button twice on the Comcast Universal Remote Control. A new screen below will appear, with the top-left option automatically selected.
Use the down-arrow key (above the Info button) to navigate to Setup and press OK/Select (the center key on the remote control in the middle of the 4 arrow/directional buttons).
Use the down-arrow key (above the Info button) to navigate to Audio setup and press OK/Select.
The Default Audio Track will default to the first option–Channel default–which which is always the channel’s main audio track (unless it was previously changed).
Press the right-arrow navigation key to change the audio track. Changing this selection will instantly change the audio.
1. Press once for English
2. Press twice for Spanish (Español) OR to activate Video Description (DVS)
3. Press three times for French (Français) 4. Press four times for Portuguese (Portugues).
5. Then press the Exit button (above the Volume button) to resume program viewing
Please note: These audio options can only be heard if the program provider or cable channel is providing that additional audio option.
- If the above does not help, look at the remote control for your TV set (not your cable box) as the TVs language settings may have been accidentally changed (sometimes labeled as MTS or SAP on the remote or via your TVs settings menu).

Z97-G45 7.1 audio not working

I have the Z97-G45 motherboard with the Razer Tiamat 7.1 Headphones. When I plug in all 4 3.5mm headphone jacks (5 if you count the mic input, which I'm not using) into the corresponding outputs on the motherboard, the 7.1 audio does not work no matter what settings I change in Realtek HD Audio Manager or Sound Blaster Cinema. Even when I turn on the 7.1, if I play some music and unplug one of the outputs, like the center/sub, rear etc, the audio for those specific drivers does not cut out. If I unplug all the cables except the Line Out, the audio still sounds the same; then when the Line Out gets unplugged, then all the audio is gone. This tells me that it's not outputting the audio through all 4 3.5mm outputs. Do I have to enable something differently/did I do something wrong? I've been at this for two days, some help would be greatly appreciated!
Thanks!

Quote from: JLio01 on 22-April-15, 11:07:19
I think you can try uninstall the SBC. When you plug them in, does realtek detect them and pop out the selecting window? I just did a search on the web, this headset can be switched between 2.0 and 7.1, are you sure you set them up correctly? Also try in the playback settings--configure--7.1 test, which ones have no sound?
When I do the 7.1 test, I hear all the speakers correctly and how they are suppose to sound. But when I start listening to music or playing a game, the sound is not how it used to be when I used the same headset on my old motherboard. I have tweaked every setting I could in Realtek and SBC and I could not get the audio to sound correct no matter what the game or music, even games that support 7.1 sound are not correct. I have no clue what is making the sound messed up.

Getting error while creating a new web app saying "The password supplied with the username domainname\username was not correct. Verify that it was entered correctly and try again"

Hi ,
I am trying to create a new web app using Central Administration in Sharepoint 2010 and getting an error "The password supplied with the username was not correct. Verify that it was entered correctly and try again".
I tried running this command also "stsadm -o updatefarmcredentials -userlogin <domain\username> -password <newpassword>" but when it got executed it showed me "Access Denied".
What should i do ??
Thanks in advance.
Regards, Anurag

HI,
right click on command icon and click run as administrator then use above stsadm commend to update credential. If still you face same issue then try with powershell as mention in below link: (make sure that you open sharepoint powershell as run as administrator)
http://smartrider.wordpress.com/2010/07/15/powershell-script-to-create-web-application-and-site-collection-in-sharepoint-2010/
let us know your result
Hemendra: "Yesterday is just a memory,Tomorrow we may never see"
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer

Audio not correct

Similar Messages

Maybe you are looking for