Audio not exporting properly

I created a movie that I exported to MPEG-4 but when I open the exported video only the first 8 minutes of audio can be heard and then silence. Does anybody have any idea on why this is happening and what I can do so I get the entire audio?

I am having a similar problem. My first MOV export created AAC audio track fine, I uploaded to Facebook and everything worked. My second export of the same MOV file (edited) creates the audio track, but the audio track cannot be heard. I uninstalled-reinstalled the QT application and re-activated the Pro options - but the problem still exists. So, in a nutshell, I was only able to create ONE working video. ANYONE? Any ideas? I can load the first m4v file in and hear the audio fine. What's going on here?

Similar Messages

HT201210 AUDIO NOT WORKING PROPERLY AFTER INSTALLED IOS7

After installed ios 7
photos not able to see fully
audio not working properly.... [no treble, no depth in sound, very low soung even the volume is full]
get strucks while playing games

This board is full of people that are update crazy...
even when they have perfectly good working systems.
i know i thought well it's just a security update not a major update.
Best advice... whenever updating the OS, unplug all
firewire devices.
will take note of that from now on.
Was this auto-update? Try downloading the file and
running the update again with all firewire devices
unplugged.
While the 828 is disconnected perform the factory
reset
again.
Disconnect the firewire cable from the 828mkII
-Press the Setup knob
-Turn the Setup knob all the way to the right
-Press the Select knob
-Press the Value knob
-Power off the interface and plug the firewire cable
back
in
-Power the interface back on
i have the original 828 not mark 2, so no reset i know of, just power on off.
After the Mac updates... reboot and plugin the 828,
see if that doesn't get you going.
pancenter-
cheers pancenter, i'll give it a whirl updating without the interface plugged in. thanks for all your help.

After the 10.9.3 update my Adobe Premiere does not export properly.

After the 10.9.3 update my Adobe Premiere does not export properly. Someone HELP!
Can anyone help?
Thanks!
<Edited by Host>

Having the same problem yesterday I spent 2 hours
Contacting tech support Apple and Adobe.
Apple says clearly that it is Adobe responsibility
and Adobe tells to contact Apple...
And none of the companies are telling when and if there will be a fix.
I'm ready to go back to PC where hardware companies
are not trying to boycot software companies. That's my opinion.
I already lost one job because of this.

Audio not exporting with photos from iPhoto to QuickTime

I have QuickTime 6.5.3 and have been making slide shows of my photos with a music background. I had no previous difficulty exporting both the photos and audio as long as the background song was taken from my own CD (not downloaded from iTunes).
That is no longer happening. When I export the photo album to QuickTime, the audio will not export. It starts to play a second of the song, then the sound disappears. What am I doing wrong?

You might be correct, Terrence.
I have only had this new Mac for a week and I simply followed my usual procedure. I'm now wondering if I should just let Lightroom import the RAW files from my camera, do all of the editing and discarding over there, and so forth.
It's funny, after I posted that I looked at my own question to the forum and realised that I was creating a redundancy that was unnecessary.
My previous MAC was manufactured in 2009, so my iPhoto in there was the 2009 version.
Ah well -- guess I got my answer in a sort of self-administered smack on the hand manner!
Thanks.

Flash CS3 Animation and Audio not timed properly when packaged.

I am trying to create a simulation with audio, mouse movement, mouse clicks and screen changes. When I play the movie in Flash, the animation and the audio are timed properly. However, when I package it, the animation falls behind the audio. I am using wavs for the audio - I've tried mp3s also.
I have a screen displayed with a mouse. The audio and a highlight indicate the next step, then the mouse moves and clicks the desired area - with a audio mouse click. The first "click" sound is pretty close to where it is supposed to be, but as the movie plays, it begins to occur earlier and earlier. So much so, that the audio starts to begin prior to animation is complete later in the move. This is not a real long demonstration, only about 1100 frames, but I notice the problem around frame 180.
Any suggestions?

IE stinks. There's a huge performance difference when playing
SWFs in
Firefox and IE. We have seen SWFs reach 100fps in FF 3.0
while the same SWF
taps out at around 40fps in the latest IE browser. It's not
Flash, it is the
browser.
Adobe Certified Expert
www.keyframer.com
www.mudbubble.com
(if you want to email me, don't look)
"AMK4" <[email protected]> wrote in message
news:gfk9ls$6kf$[email protected]..
> This has me baffled to no end. I have a flash file
that's behaving rather
> odd.
> Even the original author doesn't have an answer. I work
on a WinXP system,
> if
> that matters. When I test the movie within Flash CS3, it
works as
> expected: the
> animations ends as the audio fades out. When I publish
it, and I open it
> up in
> Firefox, it works as expected. But that's where it ends.
On the same
> machine,
> if I view it in Internet Explorer, the animation takes
longer - it plays
> slower. Consequently the audio ends before the animation
is done.
>
> I've tried multiple WinXP machines, they all do the same
thing. In Firefox
> it
> works as expected and the same way as previewed within
Flash CS3. But,
> viewing
> it in IE, and the animation plays longer.
>
> Wanna see it for yourself? Look at the original author's
page:
>
http://www.flashmo.com/preview/flashmo_137_intro/
>
> Open it up in IE and Firefox, side by side if you can.
Does it play
> correctly
> in both (animation ends as the music fades) ?
>
> Suggestions anyone?
>

Audio not exporting with video

Hello-
I am having trouble exporting a H.264 video using the YouTube HD 24 preset, which I have done dozens of times previously. The footage was captured on a DSLR with external sound and synced via plural eyes.
The problem is that the audio, which I can hear in the time line, is not exporting with the video. So far I have tried deleting all project and associated files and starting from scratch but to no avail. Does anyone know why this is happening or what I need to do to troubleshoot/fix?
Many thanks...

Thanks for the reply. I was checking them by playing the export on my iMac. I just imported the video back into PP and there is no audio when played in the system either.

MSI 865PE NEO FISR2 Audio not working properly

The audio on my board is not working properly. I have it set for 6 channel and am using Creative Labs Inspire 5.1 Speakers that have 3 inputs that match the 3 output jacks on the mobo. However, its just not right. It is sending anything to all 5.1 speakers and also to the proper speaker at same time. So every sound is coming through all speakers and it a tad louder on the speaker it should be coming out on. Anyone else have any clue as to what setting I can change to correct this or is this something wrong with the cmedia drivers?

The answer to all your suggestions is yes, already did it and in the demo app the sounds work fine. Its just so odd, I may just go to Circuit City tomorrow and buy another set of speakers and see if it is possibly them that are causing the issue. Then if so, I'll just return the Creative Labs ones as I just bought them 2 weeks ago and CC has great return policy
Actually, one of your questions I did not either understand what you meant or did not see the option Quote
Did you enable the output port correctly - LR to LR, surround to surround, center/lfe to center/lfe
The only thing I see is setting phones, 2, 4 or 6 channel in the cmedia control panel and then I plugged in the proper cables.

Illustrator not exporting properly

After exporting a gradient the color didn't seem to be exported properly:

Yes, it's a gradient on a stroke. I think you helped me make it. I saved or exported it under just about every type of format and they all seemed to have those white triangles. I fixed a JPG version in photoshop with the content aware tool but if Illustrator has a bug I thought I should post it.

Cuts from Screen Recording do not export properly

I did a simple screen recording using Quicktime X. I used Mpeg Streamclip to convert it to the codec of my timeline. I inserted a few short cuts from the screen recording. Everything looked great. However, when I export the timeline, the cuts from the screen recording do not export with the set in and out points they were cut to. The cuts, and only the cuts, from the screen recording seemed to shift in time. Its as if FCP did a random slip edit to the screen recording cuts. really weird.
I then exported each cut to an individual self-contained quicktime file, and I got the exact same results. And the shifts in time were also exactly the same. really weird. Did Apple put some kind of restriction on using the screen recordings in FCP??
any suggestions on a workaround?

I sorta found a workaround myself. Instead of converting the entire screen recording clip in Mpeg Streamclip, I simply set the specific in and out points I wanted in Mpeg Streamclip and exported the clips that way. Once in FCP, there was no extra footage for the random slip edits to occur and the final export looked as it was intended. I am still interested in any other possible solutions.

Audio not working properly on exporting keynote to Quicktime

Hello everybody,
I've created a Keynote presentation, with voiceover. It runs perfectly when launched in keynote, standalone, but as I try to export it to quicktime, the audio from an embedded video clip (just one out of 3 clips embedded in the whole presentation) stops after a few words (while the other work perfectly).
I'm going nuts! I tried saving the file afresh under different name, redoing the voiceover, tossing and reinserting that clip that stops, and save again, no luck!
Anyone experiencing the same issue?
thanks,

Hello, I have the same problem, my Quicktime movie has some of the audio files but not others. This is for a professional job so the delay while I try various settings is not helping my cause. I thought Quicktime was a well-proven solution!

Exporting to PDF from rpt file and charts within not exported properly

I am having issues when export .rpt file to pdf report using crystal report java. When exporting from Crystal Report, it displays the charts and boarders properly but when exporting using Java application the back ground colors and boarders disappears or fades. It makes the report look unprofessional. I am using version 2.0.
Looking at this release note at the this link (http://www.businessobjects.com/products/dev_zone/eclipse/cr4e-updates-readme.pdf ) I see a reference to "JRC SDK RTF exporting is not consistent with CR RTF exporting" has been fixed in Release Update 8. I tried the latest release but it seems it has release update 4 only. So, my question is where do I get Release update 8? I am hoping that will fix my issue or if anybody has any suggestions that will help me resolve it. If you can reply at your earliest, I would really appreciate it.
Thanks for your help in advance.
Edited by: selomabebe on Jul 6, 2010 8:18 PM

Here is snippet of code how I am exporting rpt file to pdf file. I didn't include every code here but I am hoping this will give you the idea. Please let me know if you need more info.
public byte[] runReport(RPTParameters para) throws SQLException {
byte[] reportData = null;
ReportClientDocument reportClientDocument = null;
try {
     reportClientDocument = new ReportClientDocument();
     reportClientDocument.setReportAppServer(ReportClientDocument.inprocConnectionString);
     reportClientDocument.open(ReportDataConstants.CPS_RPT_FILE, OpenReportOptions._openAsReadOnly);
     ExportOptions exportOptions = new ExportOptions();
     PDFExportFormatOptions pdfOptions = new PDFExportFormatOptions();
     exportOptions.setExportFormatType(ReportExportFormat.PDF);
     exportOptions.setFormatOptions(pdfOptions);
     ParameterFieldController paramFieldController = reportClientDocument.getDataDefController().getParameterFieldController();
     paramFieldController.setCurrentValue("", "@ba", para.getBusinessAgreement());
     paramFieldController.setCurrentValue("", "ReportMonth", para.getMonth());
     paramFieldController.setCurrentValue("", "ReportYear", para.getYear());
     InputStream reportInputStream = reportClientDocument.getPrintOutputController().export(exportOptions);
     reportData = new byte <reportInputStream.available()>;
     reportInputStream.read(reportData);
catch (ReportSDKException e) {
finally {
return reportData;

GPS metadata not exporting properly to JPEG

I'm shooting in RAW (Nikon NEF) and using a third party tool to geotag my photos. It creates an XMP file for each of my raw images and includes the keywords and GPS coordinates. Lightroom is able to read and display this content properly.
When I export my photos to JPEG, however, the GPS data seems to be getting "corrupted". If I look at the JPEG properties in Windows Explorer, here's what I see:
There's something wrong with the latitude and longitude, but altitude appears OK. When I upload the files to SmugMug, it doesn't seem to recognize any GPS data either.
Is this a bug in Lightroom, or am I doing something wrong? FWIW I am using version 2.4 64-bit.

I had been experiencing this very same problem, and it drove me crazy. Luckily, after searching for the answer on multiple forums, I found a solution. MetaX is a program designed specifically for tagging iTunes movies. Not only can you manually input all the required information, but you can also automatically input all the information from outside sources from within the program. It worked beautifully for me with my copy of Donnie Darko, which I ripped using HandBrake.

Slideshow - Stills/Audio Not Exporting Correctly

I have a problem with a slideshow project I’ve been working on for a few days in Premiere Elements 10.
First, my system:
Dell Studio XPS 9100
Intel Core i7 @ 2.67Ghz
12Mb DDR3 SDRAM (1333Mhz)
ATI Radeon HD 5800 video card 1GB RAM
Windows 7 64Bit
750Gb Seagate ST3750528AS HD, 7200RPM
I insert the soundtrack in Audio 1 and then insert about 100 photos one at a time. When inserting each photo, I adjust the still duration manually to match the rhythm of the soundtrack. When I’m done, it all lines up beautifully when I play it in the app. Then I save it as an MPEG and play it back, but the still transitions are off from the rhythm by a few milliseconds; just enough to be unusable.
It’s a little frustrating that what I see in the app is different from what the app outputs. I’ve tried different MPEG formats (NTSC DVD Standard to HDTV 1080P 29.97 High Quality).
Any suggestions would be greatly appreciated.

Ah. Sorry about that! I know just enough about this program to get a headache
Stills were larger than 1000x750.
Sizes of imported photos: 4288x2848, 2848x4288
PROJECT SETTINGS
General:
Editing Mode = HDV 1080i
Timebase = 29.97 frames/second
Playback settings = Desktop video display during playback (checked), External Device (none), 24p Conversion Method (Interlaced Frame), Aspect Ratio Conversion (Hardware if supported, Desktop Audio radio button selected), Export (external device = none), Disable video output when in the background (checked).
Frame size = 1440 x 1080
Pixel Aspect Ratio = HD Anamorphic 1080 (1.333)
Fields = Upper Field First
Display Format = 30fps Drop-Frame Timecode
Title Safe Area = 20 & 20
Action Safe Area = 10 & 10
Audio:
Sample Rate = 48,000 Hz
Display Format = Audio Samples
Capture :
Capture Format = HDV
Video Render:
Video Rendering = Maximum Bit Depth (unchecked)
File Format = I-Frame Only MPEG
Compressor = MPEG I-Frame
Optimize Stills = Checked
I’m not sure how to share or export as .avi.
Thanks!

Audio not rendering properly

I am experience some strange audio issues, I have not changed any settings but for the last few exports the audio got all screwed up especially when exporting either via compressor or Quick time. I have a AUparametricEQ filter on my audio and it worked fine in the past but now when exporting the video with the audio the audio is all mumbled, it takes audio from earlier in the track or it goes back and forth at one note. The audio normally plays fine when just playing back in Final cut. Even though yesterday it also got messed up when playing back, I took the Filter of and reapplied the filter on the spot which played back bad and it was fine. It usually happens when final cut renders in the background and the files have the light blue strip on the top which i never really saw.
any idea what the issue can be. As said earlier i have not changed any settings also i was using the filrer in the past all the time and no problems .

Hi
Have you tried this:
http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/lost-sound/m-p/4231472
Regards
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Audio not exporting from Keynote to Quicktime

I have recorded a 50 minute slideshow with a voice-over narration in Keynote. There are mp3 sound files on some of the slides, i.e. short clips of various sounds. When I play back the recorded slideshow in Keynote, my voice-over and the sound clips and visuals work perfectly fine. However, when I export my recorded presentation to Quicktime, only my voice-over and the slides are included in the movie, the sounds clips are missing. All of the transitions and effects work perfectly fine in the movie, it is just the sound clips that are missing. No matter how I save the file in Quicktime I cannot get the mp3 sound clips into the QuickTime movie. My computer is a MacbookPro running OSX 10.9.4 Mavericks, using Keynote 6.2. I just bought Quicktime Pro7 to see if that would help, but it did not. Would greatly appreciate advice on how to get all of audio into a movie, I've spent more than a hundred hours on this presentation. Many thanks.

Yeah, me too. Bump. Can anybody explain this behavior?!?

Audio not exporting properly

Similar Messages

Maybe you are looking for