Audio not importing from MTS files

I have AME CS6, and when I import an MTS video, the audio does not get included for some reason.
After installing AME CC, when I import the same MTS file, the audio does get included.
Does anyone know how to correct this in AME CS6?
First image is from AME CS6:
This image is from AME CC:

Changing the Import method can sometimes resolve these types of issues. With any of the "memory card" cameras, important to use this method -
1) Copy ENTIRE contents of SD card to your hard drive, all folders intact (do not use "transfer utility/conversion" software)
2) In Premiere, use the MEDIA BROWSER to find and import media (usually tabbed at lower left side of Premiere interface).
Hope this helps.
Jeff Pulera
Safe Harbor Computers

Similar Messages

  • Audio not importing from PP to AE (5.5)

    I am baffled and hope that some one can help. I am working with a third party AE Template (No pluggins) and I have tried several ways but still no audio imports to AE. Original footage is from an HD Camera CF card and was pulled into my Mac as options: .CIF, .CPF, .XML, .MXF & .SIF.  The MXL (VLC File) is what I used for import into PP, which works great, however, when I start working in AE, no audio is pulled in. I have check on RAM Preview and even the Waveform is blank in the comp???
    Any ideas, project due 7/10/13, starting to panic!
    Robert

    I did a quick search and found that there's a Canon import utility to wrap all of these files up in a package that can be easily read. You'll find a doc here that explains it.
    There are also several discussions about workflow with this camera on the net. There are discussions in the Premiere forum suggesting that a good alternative workflow is to use the Media browser to import your files into Premiere Pro. From there you could right click on a clip and select Create After Effects Composition.
    This camera is not unlike others that split audio and video into separate files. Before they can be effectively used in production the elements need to be combined into a single container. That's what import utilities are for.

  • I am not being able to play sound when I import a .MTS file from my folder

    I am not being able to play sound when I import a .MTS file from my folder on my sequence bar of my Premiere Pro CS6. Even if I use my Media Browser to import the file, the video plays fine, but the audio is disabled it seems. I don't know what to do since I have used .MTS files before without hassle on CS5.5. It is quite frustrating. What can I do?

    Hi debesh05,
    Please mention the Operating System that you are using and also make and model of the Camera that was used to capture those clips. Also, try to make another folder with the same name in the same location where the .MTS files are and move all the clips into the new folder and then try to import the files again using Media Browser in Premiere Pro CS6. If this doesn't work then make a copy of one file and rename it as .M2TS and then import that single file into Premiere Pro CS6. Please update if either of the solution works for you.
    Regards,
    Vinay

  • Audio component not apearing when importing AVCHD .MTS files

    When importing AVCHD .MTS files into Premiere Pro the Audio component is not available (also in After Effects and Media Encoder)
    What am I doing wrong :/

    You could most likely convert them using a program like 5DTORGB, and then pull them back into Premiere. Although there is a chance this won't work, however in most cases I find it usually does work. Just be prepared to lose your metadata.
    If your on a PC I'd recommend downloading their beta version it will allow you to transcode your AVCHD to ProRes HQ.
    http://rarevision.com/5dtorgb/
    All you have to is provide them a correct email address and they'll send you a download link. When you transcode though keep in mind that it's going to make your file sizes much much larger, however this because ProRes is much less compressed than AVCHD video is. You do need to keep in mind though that ProRes HQ is visually lossless. If you chose to use another free converter program you'll most likely get stuck chosing a lossy format. Another nice thing though, is that it works on MAC too. Your shooter needs to know not to do this again though, because as you already know at this point. It can cause big issues...

  • Can I import Sony .mts files with seperate audio layer into AE?

    I can import .mts files from my Sony SR11 OK but the audio is in the same layer as the video content.
    When I go to Edit/Edit in Adobe Audition and Audition opens Audition reports in details box, "Error:File not supported by any currently registered plug-ins."
    The Audition Audio Plug-in Manager shows no available plug-ins.
    Can I import the .mts file as seperate layers as one can with Premiere Pro? Alteratively perhaps, what plug-ins should I look for to add to Audition?

    AE doesn't separate audio. You'll have to do it elsewhere, possibly in Premiere Pro or tools like ffmpeg/MPEGStreamclip. It's odd, though. since these components are the same in all the suite apps, a file that works in AE should just the same open in AU (without showing teh video in teh worst case). .mts is just MPEG2 or AVCHD in disguise, anyway, which the apps should open without a hitch - if it's not out of spec. I'd look into your camera settings, though. maybe you recorded to the wrong channels or an odd audio sampel rate and it's messing things up.
    Mylenium

  • Import From CSV File statement runs forever, no error, does not finish

    Hello,
    I am trying to import a CSV file in a JAVA program, with the following statement:
    IMPORT FROM CSV FILE '/debug/testdatabase/FILE.csv'
    INTO "JOSEPH"."TEST_TABLE"
    WITH COLUMN LIST IN FIRST ROW
    RECORD DELIMITED BY '\n'
    FIELD DELIMITED BY '\t' ERROR LOG '/debug/testdatabase/file.err'
    THREADS 10
    BATCH 10000
    I have two HANA instances on different machines A and B:
    Both machines run HANA version 1.00.74.00.389160 (NewDB100_REL), while the OS is
    SUSE Linux Enterprise Server 11.1 on machine A and
    SUSE Linux Enterprise Server 11.2 on machine B.
    The statement above runs fine on machine A and the rows are imported properly from JAVA as well as when executed from HANA Studio SQL console.
    If I copy the file to machine B and try the exact same statement with the same file, it does not finish (neither from JAVA nor from HANA Studio SQL console). There is no error either. It cannot be cancelled, only a HANA restart stops the statement. Also the sample file I use has only 2 rows, and memory does not seem to be a problem.
    I seem to have a similar problem to the one described here, but the answers there do not help me: http://scn.sap.com/thread/3396582 I specified the record delimiter, and I used a python script to check for any strange characters that are not supposed to be there, but didn't find any.
    If I copy the file to my windows PC and use the "File Menu -> Import -> SAP Hana Content -> Data from Local file" function, it imports the file correctly into B, but I need to be able to do it from JAVA.
    Machine A administration view:
    Machine B administration view:
    If you have any idea what might cause this behavior or where I can find more information on this problem please give me a hint.

    Hi Joseph,
    First from the pics, the revision of your SAP HANA instance is 73 instead of 74. Since I have no identical environment, I cannot test it for you. But can you try the simplest scenario? You can create a table with only one column table try to import a CSV file with only one row.
    Best regards,
    Wenjun

  • "Import from Text File" & "Upload from Clipboard" icon not appearng in F110

    Hi Experts,
    While making the payment to the vendors through TN F110, in "PARAMETER" screen just next to 'STATUS' screen, there is a vendor field for selection in range and just ahead of this there is an icon for multiple vendor selection ( Bold arrow mark ). If I click on that multiple vender selection icon ( on bold arrow mark ), an another screen opens for multiple selection for vendors. In this screen 'Enter, Copy, Delete etc' icons are appearing at the bottom of the screen but "Import from Text File" & "Upload from Clipboard" icon are not appearing there.
    Can you please let me know how to bring that icons there?
    Points would be awarded.
    Rgds,
    Shailesh

    Hi Ravi,
    I have not yet created anything and have just entered the parameter. In the multiple screen for vendors there are 5 fields for individual and 5 for range selection. Even you can put more than five range selections or individual selections by clicking on the page button but there I am not finding these two icons.
    Can you please check at your end and let me know if you are getting or what to do to bring those two icons in F110.
    Rgds,
    Shailesh

  • Using Firefox 3.6.20 and Windows XP Home SP3. Firefox sporatically deletes bookmarks from the bookmarks toolbar. Additionally, when I try to import from a saved HTML file, Firefox does not import the complete file. Results are inconsistent.

    Using Firefox 3.6.20 and Windows XP Home SP3. Firefox sporatically deletes bookmarks from the bookmarks toolbar. Additionally, when I try to import from a saved HTML file, Firefox does not import the complete file. Results are inconsistent.

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

  • Hi, i've imported some mts files from my camera on fcpx 10,04 then i erase them (also from the trash). now if i try to reimport them, the import from camera doesn't see them anymore even if i see the files in the finder. someone could help me??

    Hi, i've imported some mts files from my camera on fcpx 10,04 then i erase them (also from the trash). now if i try to reimport them, the import from camera doesn't see them anymore even if i see the files in the finder. someone could help me??
    ps
    i got a backup for the files but even if they are on the mmc, when camera is connected fcpx doesn't see them. if i try to import a new shoot it works!!

    Thx a lot Salty. As you suggest I found other staff on support pages. I deleted AVCHD structure and kept only .mts... Now what I need to do is to convert those files with handbrake or similar tool in .mp4 or .mov to make them digest to FCPX.

  • Does Final Cut 7 support direct importing of MTS files from an HD Camera

    I have Final Cut Express 4.0.1 and have been importing MTS files from my Camera's Hard Drive to my Mac through the Log and Transfer feature. However, during the upload it converts the files to .MOV. The resulting .MOV files are much larger than the original MTS files. I am interested in learning if the latest Final Cut Studio with Final Cut Pro 7 allows for a direct import of MTS files as well as editing this native format without the need to convert to a .MOV?
    Also, I have many MTS files that are now MT2S originally imported onto my old PC that are now stored on Data Discs. Is there any way possible to bring those MT2S files onto my Mac and edit in their native format or will I need to convert them through some third party software to have them editable on by Final Cut Pro?
    Any insight is appreciated!

    You can, if you want to jump through some hoops, edit your native AVCHD footage in Final Cut (there is no direct import option but you can capture it into Toast, export that as an .mp4 and bring that into Final Cut Pro.) That being said, it is a very bad idea plus its clunky and slow.
    Long story short: Use Log and Transfer and get a big hard drive.

  • No sound imported with mts file

    I've a paid subscription version of  CS6. I'm trying to import an mts file but no audio will show in the timeline panel. This worked perfectly yesterday. I can preview in bridge with no problem. I can play back with vlc player no problem. What's going on

    Sorry my friend. I did not mean to insult your intelligence in any way. I'm on Lynda.com a lot. Just did the one on updates to CS6 Premiere and I've been working professionally in the industry for over 20 years. Sorry I can't help much with this issue.
    I am wondering from other posts I've seen, if the problem is with third party cards, AJA, BMD, Matrox, etc, even the CUDA cards. Don't know if you use these. Our CS6 Premiere is only on a MacBook Pro at the moment, so none of the third party concerns and it's working fine with AVCHD, ProRes, HDV. I did have one file go offline, but easily relinked it and all it good. All the best!

  • Error While Importing from EIF file into AW

    Hi All,
    I am facing the following error while importing from EIF file into AW using AWM as well as from sql prompt.
    java.sql.SQLException: ORA-36786: (IOSEC04) File POCAW/abc.eif does not exist or cannot be accessed.
    ORA-06512: at "SYS.DBMS_AW", line 42
    ORA-06512: at line 1
    at oracle.olap.awm.eif.eifimport.ImportDialogActionThread.doExportOrImport(ImportDialogActionThread.java:172)
    at oracle.olap.awm.eif.EifDialogActionThread.doAction(EifDialogActionThread.java:58)
    at oracle.olap.awm.ui.dialog.ThreadedDialogActionThread.run(ThreadedDialogActionThread.java:49)
    i have already created the directory pocaw.
    i have done the following steps :
    CREATE OR REPLACE DIRECTORY POCAW as 'D:\Olap_POC\export';
    GRANT all ON DIRECTORY POCAW to PUBLIC;
    execute dbms_aw.execute ('aw create ''POC_AW''');
    execute dbms_aw.execute('cda pocaw');
    execute dbms_aw.execute('dtb attach POC_AW rw');
    execute dbms_aw.execute('import all from eif file ''/abc.eif'' dfns update ');
    any idea or thought would be appreciable.
    thanks n advance
    anwar

    execute dbms_aw.execute('import all from eif file''/abc.eif'' dfns update ');
    Maybe one of the following file names could help
    (have never tried it):
    ''abc.eif''
    ''POC_AW\abc.eif''Yes,
    you don't need the slash. CDA is like setting a default directory.

  • IPhoto will not import certain JPG files

    I have just migrated to a 2012 Retina 15" MacBook Pro from a 13" MBP. I am using Mavericks 10.9.1 and iPhoto 9.5.1. The MBP is a 2.7gHz quad core with 16GB of memory and a 768GB SSD. I was trying to tidy up my hard disc and import some .jpg files from the output folder on my Capture One Session. iPhoto will not import certain jpg files but will import others. The message I get is as follows  The following file could not be imported.  The file is an unrecognised format. Then shows below for example /Users/xxxx/Pictures/Capture One Session/Output/L1000212.jpg.
    I first tried creating a new library and importing to that with no success. I then rebuilt the database. I repaired permissions. I deleted the iPhoto.plist and its caches and restarted - no success. I then deleted iPhoto and reinstalled from App Store after deleting the plist and caches again. Still no luck. The .jpg files in question open perfectly in Photoshop CC and Preview. I tried altering them slightly and resaving but still they would not import. I reinstalled Mavericks - no improvement. If I reconvert the files from the original DNG's into TIFF files, then they will import to iPhoto
    Any ideas anyone?
    Wilson

    I just recorded an action in Photoshop CC to assign ProPhoto colourspace save and close. Then copied all the problem jpegs into a temp file and ran the action. With this super fast machine, It only took a few minutes to convert 500+ files and they have now all imported perfectly. I have changed my JPEG recipe to convert DNG's from embedded to ProPhoto.
    Thanks again. Colourspace would never have occurred to me.
    Wilson

  • Error importing from BIAR file (BO XI 3.0)

    Dear BO community,
    I am using the BIAR tool for backup purposes. For my backup, I use a properties file as input which looks like the one shown below:
    action=exportXML
    exportBiarLocation=C:/Temp/BOBackup.biar
    userName=Administrator
    password=XXX
    CMS=XXX:6400
    authentication=secEnterprise
    includeSecurity=true
    exportDependencies=true
    exportQuery1=select * from ci_infoobjects
    exportQuery2=select * from ci_systemobjects
    exportQuery3=select * from ci_appobjects
    exportQueriesTotal=3
    The file creation seems to work without any problems. A file is created. However, when importing the file into another CMS, I am getting the following error:
    Failed to open the BIAR file. Reason: com.businessobjects.sdk.biar.om.internal.iw.ObjectManagerIWException:Input/Output exception occurred: 'Couldn't find entry 'BusinessObjects.xml'.
    I have opened the BIAR file using a ZIP program and checked that there is no "businessobjects.xml" file in there. When creating BIARs using only a single query, this file exists and the import is no problem.
    Does anyone have an idea what's happening and can help me?
    Thank you and best regards!

    Hello ALL,
    I have the same problem when I am trying import from BIAR file. Please tell me how you resolved this issue.
    I did not understand much from your previous message.
    We are using BO XI R3.1 and below is the error message that Import Wizard is throwing.
    Failed to open the BIAR file. Reason: com.businessobjects.sdk.biar.om.internal.iw.ObjectManagerIWException:required dependencies not found target system : 'AWAS3XkMSEtGn1TXI370kAU'
    In both pc  BO version is boxir3.1 sp3 and currently i m using windows xp professional version 2002 sp3
    Thanks
    Saurabh shivam

  • Can you use a subquery when importing from a file?

    I was wondering if the DBMS_DATAPUMP API allows using a subquery (DATA_FILTER) when executing an import from a file?
    I am unable of limiting my data when creating the export file because my subquery requires a database link, which is not an option on the server I'm working on. So I'm wondering if I can limit my data on the import from a file, rather than the export?
    Thanks for any advice...
    ivalum21

    I was wondering if the DBMS_DATAPUMP API allows using a subquery (DATA_FILTER) when executing an import from a file?From the documentation I would say yes:
    SUBQUERY:
    Specifies a subquery that is added to the end of the SELECT statement for the table. If you specify a WHERE clause in the subquery, you can restrict the rows that are selected. Specifying an ORDER BY clause orders the rows dumped in the export which improves performance when migrating from heap-organized tables to index-organized tables.
    «

Maybe you are looking for