Audio not in sync - help please

This never happened before. I drag my Quicktime movie into the Assets tab and then into the editor. The audio and video are in sync for about the first 5 mins. of the half hour production, and then it goes out of sync. Can't understand it.
I made a new QT mov. and the video and audio tracks are exactly the same length. When I play the movie in the QT player it's fine all the way through. But in DVDSP I have the sync problem. Never did before.
What is going on? Any help appreciated!

Dear Sir,
When I look at my IPAD contents when it is connected via USB to my PC in the ITines Left Panel THe book shows with 2 greyed out circular small icons. When I look in my IPAD the book shows but it does not play.
I have tried 10 times syncing but the book just does not come on my IPAD and Play. The book is showing on my IPAD MUSIC-> More -> AudioBooks but it does not play
regards
Bikram

Similar Messages

My macbook pro is not charging - any help please!?

My macbook pro is not charging - any help please!?
<Edited by Host>

Hi sdennisonta,
If you are having an issue with charging your MacBook Pro, I would suggest that you troubleshoot using the steps in this article -
Mac notebooks: All about batteries - Apple Support
If the battery appears to be working correctly you may want to see if the issue lies with your power adapter. Use the steps in this article -
Apple Portables: Troubleshooting MagSafe adapters - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

Video and audio not in sync

Anybody else experiencing video & audio not in sync since upgrading to Lion? I have a MacBook Pro 15-inch, Early 2011 with
AMD Radeon HD 6490M 256 MB graphics. I mostly stream You Tube, Netflix, & news videos and occasionally watch movies I have in iTunes or on DVD, and since upgrading, I've seen out of sync video and audio in every one of these situations. Sometimes it starts out OK and then slowly deteriorates. Other times it just starts out that way and stays that way. Happens with all browsers as well as iTunes and DVD Player. Tried a few Google searches but haven't come across any postings reporting this with Lion, so I thought I would try here. Thanks for any confirmations and/or pointers to a solution if there is one.

Ahh...boom. I have it too. Forgot it was even there. I had it turned off back when running Snow Leopard since it was glitchy. Apparenty, I somehow reenabled it and wasn't even aware it was on since its volume was turned down. After disabling it, all video & audio appears to be in sync.
boom...the sound you'll hear as I nuke it from my system.
Thanks efrancis76 for figuring this out. Much appreciated!

Rebuild screen freeze - unable to update firmware as not docking. Help please

Hello, I've got an 8gb Zen.
Always worked fine til I tried one of those hand crank chargers, since then I turn it on and it will freeze on the rebuilding screen.
Ran scandisk on it - no joy.
Wanted to try and update firmware to see if that helped but it will not connect to computer via USB. It will charge from the usb but just not connected, nothing.
Any help appreciated. Thank you

QRe: Rebuild screen freeze - unable to update firmware as not docking. Help please? So, it freezes on the rebuilding screen after formatting? It is very odd. Just to make sure... you have formatted (not cleaned up) the device from the Recovery Mode menu, right?
My only suggestion now is trying to mount the device on another computer (try one with a BSD or Linux operating system) and format it from here. With some luck, you should be able to see it as a new USB dri've. I am suggesting one of these operating systems, as you have a chance to mount your player on them even if it does not boots up properly. (I did it to recover mine just before suspecting there was a discrepancy on the FATs stored of the filesystem.) In your case, you will have a chance to format the device (using a FAT filesystem, of course) from these operating systems. I am, however, surprised to see that the Recovery Mode format function does not do its work on your player.
If your device does not boot up and freezes on the scanning/rebuilding processes there is a chance you have a problem with your filesystem instead of a fried USB port. So, there is a chance you can fix this device yourself yet.

SB X-fi Xtreme Audio PCI-E Not working correctly help please

Hi i have a SB X-fi Xtreme Audio PCI-E card on my pc , i have currently installed windows 7 and for months now i am trying to make the card work .. I have a poor sound especially when there is bass, the card is not detected by windows 7, its detected as a high definition audio device , when i plug my mic is not found..and i cant use the creative applications because is says its not supported or i have no creative poroducts on my pc ... I have tried all the latest drivers and stil have the same problem.. HELP PLEASE !!

First, uninstall all creative drivers, console, from add/remove. Restart computer install: . X-Fi Xtreme Audio Series Driver .04.0000 from creative website. 2.X-Fi Xtreme Audio Pack .03.0002 from creative website. 3. install Creative Console from here: http://forums.creative.com/t5/Sound-Blaster/PAX-Console-Launcher-V-0/td-p/549970 * PAX Console, Modded Original Console, but newer then Creative) or this creative console: CSL_PCAPP_LB_2_6_09.exe ( it creative original console) With this console you will have bass, treble, etc, BUT you need to open ConsoLCu.exe from Program Files/Creative/Console Launcher. ConsoLCu.exe have all the options you need. Creative forget about thier sound board, thier drivers, bass, treble, etc, about customers. If you install thier drivers from their website you will not have BASS, and also an crappy sound. You need to install Creative Console from google, or from http://forums.creative.com/t5/Sound-Blaster/PAX-Console-Launcher-V-0/td-p/549970 to have bass, crystalizer, etc. I also have Creative Audio PCI-e board..... crappy chipset, just like Sb Li've 24 biti PCI.

Video and audio not in sync. Other answers here do not help.

My audio and video are not in sync in many streams but some are OK.
I do not have any extensions, add-ons and I am using the default theme. I have disabled hardware acceleration. I am now running in Safe Mode and the problem persists.
The video and audio sync for the first few minutes and then they work their way futhter and further apart, usually several seconds out of sync. I don't think this particular situation has been covered in the other posts.

You can check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting

When I try to sync my I phone 4 to my mac air it won't show up only my iPad not the phone help please

When I try to sync my iphone to Itunes on my mac air ti will not come up
My ipad works ok but not the phone help please

Hello Canonball,
It sounds like your iPhone is not showing in iTunes so it will not sync, but your iPad works fine. If you have already restarted your phone, (Turn your iOS device off and on (restart) and reset, http://support.apple.com/kb/ht1430), I recommend the troubleshooting from the following article named:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Check USB connections. iOS devices require USB 2.0 to function properly. If you're not sure your Mac has USB 2.0 ports, refer to the computer's specifications.
Disconnect other USB devices and connect your device directly to a USB port on your Mac.
Restart your Mac.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Encore CS5 audio not in sync

Hi,
I'm hoping someone can help me soon. I have multiple timelines that I created in Encore. I have noticed about 25% of them have their audio out of sync. There is nothing complicated with how I built the timelines. All I did was create a timeline and drop in the original video that came off the SD card. All the timelines have video from the same source. I did not even mess with the audio and I don't know if you can for that matter because I'm new with this program. Anyway, the original videos play just fine in the finder. I'm using an iMac with OS X 10.7
I've been trying to figure this out for hours and researching on Google to no avail. I'm so frustrated right now with Adobe products. Adobe staff, if you are reading this, I beg of you to please slow down. Quite trying to make more features. I bet I could safely say that 95% of your faithful users would rather have working software rather than more features. We waste so much time trying to resolve these "little" issues, because they put a halt to productivity. Time is money Adobe. This is so sad. As I'm writing this, I'm realizing that my begging or ******** will do absolutely nothing. I'd probably have better luck playing pick up sticks with my *** cheeks. You should study Luxology's way of handling customer support. Each and every email goes to the present and he replies back. They also make adjustments based off of what other customers are saying. I can't say one bad thing about their forums either. If I have issues, I don't get directed to anyone in India. I don't even have enough time to tell you how one of my last calls went with them. They are not experts. Not even close. I was pissed.
Okay, enough ranting for now. Adobe, if you want to contact me, you know how to get a hold of me.
Thanks to those that are willing to help.

Hi John,
Thanks for getting back to me.
1. I looked at that program and it doesn't get good ratings. I found one other one that does get good ratings for the same price and from what I could tell, it does the same thing with different options. That being said, I don't know if all that collected data is really going to help out in this scenario. The video is an .AVI, 640x480, 1.0 ratio, at 30 fps. A lady took the video using her little pocket camera. I did right click on it and picked Interpret Footage but nothing seemed to happen. It is a very short clip, so maybe something happened but I didn't see it. And it didn't help anyway. Like I said, all the other ones are the exact same type of file and they work fine. I don't see any kind of warning to alert me as to what could be wrong. Taking a screen shot isn't going to do anything in this case either. Simply put, if the video is a minute long, the sound lasts half of that time. There is nothing that a screen shot will help explain. If I had a symbol or a weird glitch of some kind, I would record the video and post that.
EDIT: Okay this is weird. As I went to try that Transcode thing, which wasn't highlighted anyway (and all the timelines say "untranscoded"), I double clicked the timeline in question and went to the point where the sound was ending and now it plays fine. WTH? I hope when I finally get this DVD done, the audio is in sync. I've read a lot of forum posts where it's off AFTER they burn a disc. Damn Apple for ditching iDVD. Their stuff worked for me all the time. No problems. Arrrrg.
2. Thank you for the link to the huge list of tutorials. I am new and have watch videos from Lynda.com and YouTube.com, but unfortunately all these video are perfect world scenarios. That would be cool, if these videos had situations like mine, but they focus on how easily a person can get up and running with these programs, that I don't believe they want to show these situations as they might overwhelm the customer and then won't sell as many tutorials. But I do believe they should have a whole series on problems. Believe me there would be plenty to do just from Adobe's software.
3. Here's an extra question. I own the whole CS5.5 Master Suite. I've spent thousands of dollars over the years since 1996 on their software. Shouldn't there be the ability to check the Codec information like that $3 program you pointed me to?
Thanks.

Firewire Port not working, URGENT help please¡¡¡

Hello People, i´ve just got a new Mac Mini last week, and i´ve been trying to get my Alesis MasterControl audio interface, and is just a complete mess.
This happened right after i´ve upgraded to 10.8.3 so i don´t know, the weird thing is that if i connect my old iBook to the Mac Mini the FW800 port works, but everytime i connect the audio interface, nothing happens, also the drivers from alesis, are up to date. i first thought about the port of the Mixer went bad, but it has 2 and non of them works, also thought about the cable but the same cable works when i connect my iBook, and the mixer is not bus powered, it has it´s own power supply.
Needless to say i´ve already done the usual reset PRAM, turn of the Mac unplugged for 30 hour to reset the bus. etc.
This is the usual firewire only system log that i get:
31/03/13 08:01:20.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 08:01:30.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 11:33:23.529 system_profiler[528]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 11:35:43.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:38:55.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:42:08.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:44:39.124 CleanMyMacHelperTool[583]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.3.8671"
31/03/13 11:44:39.146 CleanMyMacHelperTool[583]: Wont clean /Volumes/AlesisFirewire-3.5.3.8671 because disk image
31/03/13 11:44:39.148 CleanMyMacHelperTool[583]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.3.8671"
31/03/13 11:44:39.149 CleanMyMacHelperTool[583]: Wont clean /Volumes/AlesisFirewire-3.5.3.8671 because disk image
31/03/13 11:44:52.727 coreservicesd[62]: Application App:"AlesisFirewireUninstaller" [ 0x0/0x7f07f] @ 0x0x7fb5c8c30050 tried to be brought forward, but isn't in fPermittedFrontASNs ( ( ASN:0x0-0x80080:) ), so denying.
31/03/13 11:44:52.727 WindowServer[85]: [cps/setfront] Failed setting the front application to AlesisFirewireUninstaller, psn 0x0-0x7f07f, securitySessionID=0x186a5, err=-13066
31/03/13 11:47:28.533 CleanMyMacHelperTool[656]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.3.8671",
    "/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:47:28.544 CleanMyMacHelperTool[656]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.3.8671",
    "/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:49:26.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:52:39.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:57:22.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 11:57:34.000 kernel[0]: Alesis Firewire - 3.5.3.8671 preliminary - x86_64 CJ - May 3 2010 02:43:28
31/03/13 11:58:36.982 com.apple.launchd.peruser.501[155]: ([0x0-0x1d01d].tc.tctechnologies.AlesisFirewire.controlpanel[238]) Job appears to have crashed: Abort trap: 6
31/03/13 11:58:37.252 ReportCrash[242]: Saved crash report for AlesisFirewire Control Panel[238] version 3.5.3 (3.5.3.8671) to /Users/m1kygarcia/Library/Logs/DiagnosticReports/AlesisFirewire Control Panel_2013-03-31-115837_Mac-mini-de-Miguel.crash
31/03/13 11:58:39.831 system_profiler[267]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 11:58:50.676 com.apple.launchd.peruser.501[155]: ([0x0-0x23023].tc.tctechnologies.AlesisFirewire.controlpanel[274]) Job appears to have crashed: Abort trap: 6
31/03/13 11:58:50.837 ReportCrash[242]: Saved crash report for AlesisFirewire Control Panel[274] version 3.5.3 (3.5.3.8671) to /Users/m1kygarcia/Library/Logs/DiagnosticReports/AlesisFirewire Control Panel_2013-03-31-115850_Mac-mini-de-Miguel.crash
31/03/13 11:58:53.638 system_profiler[277]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 11:59:09.747 CleanMyMacHelperTool[300]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:59:09.905 CleanMyMacHelperTool[300]: Wont clean /Volumes/AlesisFirewire-3.5.6.11675 because disk image
31/03/13 11:59:09.906 CleanMyMacHelperTool[300]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:59:09.907 CleanMyMacHelperTool[300]: Wont clean /Volumes/AlesisFirewire-3.5.6.11675 because disk image
31/03/13 12:00:47.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:00:59.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:01:56.720 system_profiler[269]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 12:05:40.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:08:52.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:12:42.277 AlesisFirewire Control Panel[245]: -_continuousScroll is deprecated for NSScrollWheel. Please use -hasPreciseScrollingDeltas.
31/03/13 12:12:42.277 AlesisFirewire Control Panel[245]: -deviceDeltaX is deprecated for NSScrollWheel. Please use -scrollingDeltaX.
31/03/13 12:12:42.278 AlesisFirewire Control Panel[245]: -deviceDeltaY is deprecated for NSScrollWheel. Please use -scrollingDeltaY.
31/03/13 12:13:53.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:25:29.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:25:38.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:28:30.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:28:33.906 system_profiler[273]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 12:31:41.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:35:16.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:35:26.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:37:53.513 system_profiler[266]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 12:39:36.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:39:49.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:42:55.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 53 bus resets in last 3 minutes.
31/03/13 12:46:50.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 68 bus resets in last 3 minutes.
31/03/13 13:01:30.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 13:01:41.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 13:05:27.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 79 bus resets in last 3 minutes.
31/03/13 13:06:31.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:09:43.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:13:31.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 13:13:45.006 com.apple.kextd[11]: Can't load /System/Library/Extensions/IOFireWireIP.kext - ineligible during safe boot.
31/03/13 13:13:45.008 com.apple.kextd[11]: Load com.apple.iokit.IOFireWireIP failed; removing personalities from kernel.
31/03/13 13:13:54.818 com.apple.kextd[11]: Can't load /System/Library/Extensions/AlesisFirewire.kext - ineligible during safe boot.
31/03/13 13:13:54.823 com.apple.kextd[11]: Load tc.tctechnologies.driver.AlesisFirewire failed; removing personalities from kernel.
31/03/13 13:13:56.372 com.apple.kextd[11]: Can't load /System/Library/Extensions/AlesisFirewire.kext - ineligible during safe boot.
31/03/13 13:13:56.375 com.apple.kextd[11]: Load tc.tctechnologies.driver.AlesisFirewire failed; removing personalities from kernel.
31/03/13 13:15:40.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:18:46.763 com.apple.kextd[11]: Can't load /System/Library/Extensions/IOFireWireIP.kext - ineligible during safe boot.
31/03/13 13:18:46.768 com.apple.kextd[11]: Load com.apple.iokit.IOFireWireIP failed; removing personalities from kernel.
31/03/13 13:18:46.797 com.apple.kextd[11]: Can't load /System/Library/Extensions/AlesisFirewire.kext - ineligible during safe boot.
31/03/13 13:18:46.800 com.apple.kextd[11]: Load tc.tctechnologies.driver.AlesisFirewire failed; removing personalities from kernel.
31/03/13 13:18:50.775 system_profiler[221]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 13:18:52.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:21:03.488 system_profiler[235]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 13:22:37.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:24:07.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 13:24:19.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 13:31:00.926 system_profiler[316]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 13:33:03.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 134 bus resets in last 3 minutes.
31/03/13 13:35:11.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:38:24.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:41:36.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:44:48.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:58:13.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 14:01:25.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
Can somebody help, please i´d gladly appreciate it.

I have this
System Profiler[170]
SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
& this
kernel FireWire (OHCI) Lucent ID 5901 built-in: no valid selfIDs for more than 3 minutes after bus reset.
Pls, help!!

IPod Nano 6th gen won't sync - help please!

I lost my iTunes and all my music when my laptop died, but managed somehow to get it all back onto my new laptop - none of my music is purchased though iTunes but downloaded separately or from CDs. However when I sync my iPod it doesn't actually change anything or add new songs from my iTunes, and playlists on my iPod do not appear in my iTunes. Help please! I've tried manually managing my music and syncing but that doesn't work either, and when I plugging it into my computer it says on the iPod screen that its syncing but it doesn't show that it is in iTunes.

Depending on how you add content to your iPod, have you seen this article?
iTunes: Error 13019 during sync
B-rock

Green & Pink horizontal Lines? and Audio Sample Rate? Help, Please!

I have just successfully completed one short film. I'm believe I'm doing exactly the same as before but I'm running into problems. Used a Panasonic PV-GS300 camcorder with mini DV. Then a Sony DSR-11 deck. When I capture there are green and pink bars within horizontal lines over the image in the viewer. When I end the capture I get the message 'the audio sample rate of captured media files does not match the sample rate on you source tape. Video and audio out of sync.' The captured film clip audio rate is 48.0 KHz, the audio format is 16-bit integer, the audio is 2 Mono and the tracks are 1V 2A. Any suggestions, help would be greatly appreciated.
1.8 GHz Power PC G5, 2GB DDR SD RAM Mac OS X (10.4.9) FCP 5.1.4

Sorry about that, I'm away from my FC system, so I can't refer to it. You should choose DV-NTSC in Easy Setup as a starting point, then if the audio settings of your footage are different from 48kHz 16-bit, then you can easily change the capture settings to match.
tim

I am running windows 7. We updated firefox and it would no longer open. I uninstalled it and reinstalled from firefox website. I click on the firefox icon and it will not open. Help please

It installs and I attempted to launch the browser and it never starts. I tried to uninstall, but it says firefox is running. I restart my computer and uninstall and try again. It still will not open after install is complete. Why won't it ever open up? Help please!

Right-click on your Windows Taskbar and select Start Task Manager. Look in Task Manager for processes running that are Firefox-related, such as Firefox.exe or plugin-container.exe. If you see either of those, right-click each of them and select "End process". Then try again to start Firefox in [[Safe Mode]]. 
*If Firefox will start in Safe Mode, select the option you are presented with to disable your add-ons and plug-ins and restart Firefox normally. You likely have a plug-in, add-on, or a combination of two or more that is causing the problem. Because Firefox allows users to customize endlessly, sometimes there can be conflicts between customized items. From the Firefox menu bar, go to Tools -> Add-ons then re-enable them one by one, restarting Firefox after each and testing after each one to see which one or combination of two or more is causing the problem. 
*If Firefox will not start in Safe Mode, make sure you again check Task Manager and end any running instances, then uninstall Firefox and download a fresh copy from mozilla.org/firefox using another browser temporarily. Re-install Firefox (see: [[Installing Firefox on Windows]] for more help ) and try running Firefox again.
Please report back your progress.

Accidentally deleted bonjour from my computer. iTunes will not open. Help Please.

Accidentally deleted Bonjour from my computer. iTunes will not open. Running Windows XP. Help please.

Uninstalling and then reinstalling your iTunes should also get your Bonjour reinstalled.
For the reinstall, use an installer downloaded from the Apple website:
http://www.apple.com/itunes/download/
... or you could get it back via your Apple Software Update for Windows.
If you'd prefer not to uninstall iTunes, try the following procedure.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the Bonjour.msi (or Bonjour64.msi) to do a standalone Bonjour install.

My ipod touch is connected to the computer but itunes is not recognizing it. help please !

My ipod touch is connected to the computer but itunes is not recognizing it. I need help please. I've tried restarting both my ipod & the computer and also unistalling itunes and loading it again, nothing is working.

Assuming you have a PC, start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

My macbook pro external speaker not working! help please

My macbook pro external speaker not working! help please

1. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
     Pllug in the speakers.
     Do they show up?
     Make sure that Mute is not enabled.
2. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
Best.

Audio not in sync - help please

Similar Messages

Maybe you are looking for