Audio not panning

When playing back a time line in FCPro 7, the audio is not panning...
1. had stereo clip
2. unstereo linked it (ch1 lav/ch2shotgun
3. set clip in viewer (from timeline) to center
4. playback is still on L channel, not center.
Please help
Thanks,
Shane

Assuming you changed from stereo to mono correctly, are both mono clips now panned to 0?
-DH

Similar Messages

Macbook pro 17" digital audio option not showing in Audio preference pane

I seem to be having a problem with the Digital Audio setup with my macbook Pro 17" 2006, running Snow Leopard, when I go to select the SPDIF option in the Audio Prefernce Pane it doesn't give that option!, like it did in Leopard and Tiger of which I had running on this Macbook pro.
Running Snow Leopard this option seem to be missing, I looked in the Midi Setup etc in Utilities as that how I worked around it in Tiger as well as Leopard.
I also have the same problem with my other newer and last of the Macbook Pro 17" model as ti doesn't show in the Audio Preference pane either. Is this an omission in the OS or with my hardware as had no proble,s connectiong to a Sony MD and Tascam MD rack system before. I can always go back to using the older OS if thats the problem but find it hard to believe that All of my Laptops 15" & 17" are all up the swany with the same SPDIF problem.

also posted this question in the MacBook forum. Problem eventually solved by trashing iTunes preference files & the iTunes application, then re-installing iTunes.

With 10.2 I can only use system speaker output for audio, NOT my RME FF400 I used previously. The FF400 works fine with other apps. How can I set this device in FCP 10.2? (it is set in both system preferences and midi)

With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.

From the fcp.co forum. See if this does anything for you.
simon_hutchings
OFFLINE
Junior Boarder
Posts: 24
Thank you received: 5
Karma: 1
I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
1. Open the application Audio Midi Setup (located in Applications : Utilities)
2. Select the Output Tab for the current output device
3. Select the Configure Speakers option
4. Select the Multichannel tab
5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked.

Final Cut Pro X - Share - Export Media - H.264 - Audio is panned to the left?!

My video has a soundtrack that is a stereo .WAV that I can play in QuickTime with no problem.
I added the .WAV to my FCPX project, exported H.264 of the finished video, and when I play the resulting file in QuickTime, the audio is panned to the left. There is still some stereo separation but it's like the right channel has been turned down. Alternately playing the video and the original .WAV in QuickTime makes it extremely obvious, but it's actually noticeable (and very annoying) even without the comparison.
Does this happen to anyone who exports H.264 via the Share -> Export Media menu item, or is it something in my project? (I didn't do anything to the audio apart from dragging it onto the timeline - I tried deleting the audio and dragging the file back on again but it still ends up panned to the left in the output).

It was set to Surround and 48Khz. I set it to Stereo (and 44.1Khz for good measure, as that is the sample rate of my soundtrack) and then re-exported to H.264, and now the audo is perfectly centered.
So that's perfect, thanks.
Now the only thing wrong with FCPX is how it crashes every ten minutes or so!

Video and audio not in sync

Anybody else experiencing video & audio not in sync since upgrading to Lion? I have a MacBook Pro 15-inch, Early 2011 with
AMD Radeon HD 6490M 256 MB graphics. I mostly stream You Tube, Netflix, & news videos and occasionally watch movies I have in iTunes or on DVD, and since upgrading, I've seen out of sync video and audio in every one of these situations. Sometimes it starts out OK and then slowly deteriorates. Other times it just starts out that way and stays that way. Happens with all browsers as well as iTunes and DVD Player. Tried a few Google searches but haven't come across any postings reporting this with Lion, so I thought I would try here. Thanks for any confirmations and/or pointers to a solution if there is one.

Ahh...boom. I have it too. Forgot it was even there. I had it turned off back when running Snow Leopard since it was glitchy. Apparenty, I somehow reenabled it and wasn't even aware it was on since its volume was turned down. After disabling it, all video & audio appears to be in sync.
boom...the sound you'll hear as I nuke it from my system.
Thanks efrancis76 for figuring this out. Much appreciated!

Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

Basics from the User Guide are restart, reset, restore from backup, restore as NEW. Unless you've tried ALL of these, you're not done troubleshooting.

Ac3 dts audio not working in my iphone but it works in my friends samsung mobile?pls help me.

Iam using o player... Ac3 dts audio not working msg showing

Settings > General > Reset > Reset Network Settings
Contact the carrier.

Audio not in Sync with Video in FCP

Hi People, i'm new to this, hoping to find some support.
I have Final Cut Studio 2, im doing an Apple Pro Training series book - 'Final Cut Pro-Beyond the Basics' and im having a problem of the audio not syncing with the video. If i simply play the sequence, the video is ahead by about 7 seconds, and if i stop and start playback (edit) it remains out of sync. However, if i let the sequence play through and loop, when it restarts at the beginning, it appears fine and all fixed, until i stop plyback and start it again. So, the only way to have it work right (to check my edit) is to continue to let the sequence loop and it fixes itself?? In QT it says the clip is DV 720 * 480, 23.98 fps, and so ive checked that in FCP, the settings are the same, and ive played around extensively with the real time plyback settings and sequence settings, but nothing fixes it apart from letting it play til it loops!!!???
Has anyone had this??
Am i missing a setting here?? It seems to have been like this since the update to 10.5.3
Thanx!

Hi People, i have found the answer to my question and thought i might post the cause so anyone else who gets caught can get it sorted.
The answer ended up being that i had an aggregate device as my audio interface (because i have 2 audio interfaces) and so the audio was being delayed in being processed. So i deleted the device in my Audio MIDI Setup (audio page) and thhus, its all good. Quite painfull after a FC reinstall! Ha!!
Cheers

Audio note in whatsapp is too low

i have a problem with my audio notes in whats app, when i receive an audio note i can open it but i can barely hear what is playing the sound is too low

Take a look at a program called Boom on the App store. It gives you more volume than Apple allows.

Content is not Panning while softkeyboard appears in GPU and Direct Mode (Adobe Air SDK 4.0.0.1390)

Hi,
My content is not panning while softkeyboard appears in GPU and Direct Mode(I have placed my input textfield at the bottom of the screen) it is working fine with the CPU and AUTO Mode. I am using Air sdk v 4.0.0.1390. I have checked my manifest file also and have added '<softKeyboardBehavior>pan</softKeyboardBehavior>' still it is not panning my content while keyboard appears.
Has anybody faced this problem earlier?
(On Android i am getting this problem on iOS it is working fine)

Could you please open a new bug report on this over at https://bugbase.adobe.com? When adding the bug, please include some sample code or a sample application so we can quickly test this out internally. If you'd like to keep this private, feel free to email the attachment to me directly ([email protected]).
Once added, please post back with the URL so that others effected can add their comments and votes.
Thanks,
Chris

HT201210 AUDIO NOT WORKING PROPERLY AFTER INSTALLED IOS7

After installed ios 7
photos not able to see fully
audio not working properly.... [no treble, no depth in sound, very low soung even the volume is full]
get strucks while playing games

This board is full of people that are update crazy...
even when they have perfectly good working systems.
i know i thought well it's just a security update not a major update.
Best advice... whenever updating the OS, unplug all
firewire devices.
will take note of that from now on.
Was this auto-update? Try downloading the file and
running the update again with all firewire devices
unplugged.
While the 828 is disconnected perform the factory
reset
again.
Disconnect the firewire cable from the 828mkII
-Press the Setup knob
-Turn the Setup knob all the way to the right
-Press the Select knob
-Press the Value knob
-Power off the interface and plug the firewire cable
back
in
-Power the interface back on
i have the original 828 not mark 2, so no reset i know of, just power on off.
After the Mac updates... reboot and plugin the 828,
see if that doesn't get you going.
pancenter-
cheers pancenter, i'll give it a whirl updating without the interface plugged in. thanks for all your help.

Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?

Hi. I have a OS X Yosemite Version 10.10.1 Mac Book Air, Processor 1.86 GHz Intel Core 2 Duo.
Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?
The video starts out fine, but if I click on the expand icon in the lower right corner of the screen the audio won't keep up.
Refreshing the page don't help at all. In fact, nothing seems to help once it starts.
I did not have this problem at all using Mavericks. The problem started after installing Yosemite.
Any way to fix it?

only $99, i thought it was closer to $175.

Can I transfer notes from the app Audio Note Taker on to my MacBook??

I have Audio Note Taker and I am trying to find Audio Note Taker Sync Utility so that I can transfer notes to my Macbook. Does anyone know where I can find that or another way to transfer my Audio Notes to my Mac???

I have no experience with the App, so I don't know how the actual notes are saved.
Try using Evernote. It's free, and has audio note support. It has a PC/Mac app, so syncing is very easy.

I am using elements 10 and only getting audio not video. Can anyone please explain why? I am a total newbie to video.

I am using elements 10 and only getting audio not video. Can anyone please explain why? I am a total newbie to video.

greenfrogstone
Just saw your thread, and it looked like a candidate for the Premiere Elements 10 NVIDIA GeForce Roll Back the Driver issue. If your computer uses a NVIDIA GeForce video card/graphics card, then the following applies to you. You do not want to update the driver. Rather you want to roll back the driver version, probably to about May 2013. For your convenience I have done a copy/paste of the forum announcement which gives all the details and fix of the matter.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
This matter has been very specific to the Premiere Elements 10 NVIDIA GeForce card user. So, if your computer is using other than a NVIDIA GeForce card, it is likely that the message does not apply to you, and we can then explore other troubleshooting possibities.
Looking forward to your follow up. Do not hesitate to ask for clarification on anything written here.
Thanks.
ATR

Why when mixing down video, audio gets panned to left?

I don't know why it happens. I've checked and it's not panned at all before the mix down/render. Any help?

I think it figured it out. If you're doing a stereo project but have the project set to Surround it will mix down with an odd pan to the left. Just an FYI.
I fixed the project properties and now it mixed down with no pan.

Audio not panning

Similar Messages

Maybe you are looking for