Audio not played for Motion Background

I have created a movie in my NLE as a motion background for a menu in Encore 2.0. When I preview the dvd project after rendering the audio plays fine but when I burn to dvd the audio is missing but the motion video still plays.
Why is this audio not playing on the burned dvd

In what form is the motion background when you bring it into Encore? Is it an avi? Is it compressed?
Is the audio stream a separate file?
If separate, is the audio stream a different length to the video file? Is the audio stream just a .wav file or what?

Similar Messages

My e-learning consists of 40 slides. I am publishing the project as HTML5, while previewing, when I use the back button on the playbar, there is an audio mismatch. Some other audio is played for that slide. Please help.

My e-learning consists of 40 slides. I am publishing the project as HTML5, while previewing, when I use the back button on the playbar, there is an audio mismatch. Some other audio is played for that slide. Please help.

Hi there,
Can you please share your Captivate version?(Help>About Adobe Captivate)
Thanks,
Nimmy Sukumaran.

Premiere CC 2014 audio not playing

Audio not playing in some projects, either in reference mon or timeline, but plays in other projects.
Premiere CC latest
MAC 2.66 Gh i7 8GB RAM NVIDIA GeForce GT 330M 512 MB
OSX Mavericks /256GB SSD (P
1TB HD write disc

Moving to Premiere forum

Bought a ipod nano 6th and is not playing for more than 2 min?

bought a ipod nano 6th and is not playing for more than 2 min?

The most likely problem is that the headset is not inserted fully. When you insert the headset, you should feel and hear a "Click" to let you know it is inserted all the way.
The problem is that if it is not inserted all the way, the nano does not detect it. If it is not detected, it will pause playback when the screen goes dark. This is to keep your battery from draining when there is nothing connected to listen to the music.
i

Songs stop playing on my iphone I try to start it again and it will not play for more than 2-4 seconds, does anyone have the solution to this problem?

I have Imatch and songs stop playing on my iphone I try to start it again and it will not play for more than 2-4 seconds, does anyone have the solution to this problem?

By "hard reset" you mean hold down the Home and power buttons until the iOS device restarts, correct?

Background Audio not playing in Captivate 4

I imported a background audio track to my Adobe Captivate project, and I can see it in the background audio menu, however, when I preview or publish the project, it does not play. When I am in the import menu, it plays, but only there. I have done this many times before without issue. Any ideas?

Hi there
I am not sure if I understood the problem correctly. I tried to add a background audio to a test project and it worked fine for me in preview and publish.
When you say "I can see it in the background audio menu" are you meaning the following?
Audio->Background Audio... ==> Audio Background Dialog opens up and the audio track is shown properly. In library, the use count of this audio is non-zero and when you right click on the audio and select usage, "Project" is listed as one of the users.
When you say "When I am in the import menu, it plays, but only there", which import menu are you taking about?
Can't the audio be played from the library preview or from audio properties dialog or from Audio Background dialog?
Do you have this problem with any project that you are creating or is the problem happening in one particular project only? If it is only a particular project, can you share the CP project?
Cheers
Siva

Captivate 7 HTML5 background audio not playing

The issue seems to be related to a slide with background audio that plays after a Random Question slide. I can see the playhead moving but the audio is muted. It seems to be a bug with Captivate 7.
To duplicate the issue, create a new Captivate 7 project, insert 2 Blank slides, each with Background Audio. Create a question pool with 2 multiple choice questions and insert a Random Question slide between the 2 previously created Blank slides. When playing in HTML5 from the start (F11), the second background audio does play (is muted).
I'm using Chrome in Windows 7.

Sreekanth,
I think I've found a workaround for this issue. I’m finding when audio is placed on each question slide in the pool, the audio on subsequent slides play. The audio on the question slides has to be different from audio used on non-question slides (but all the question slides can use the same audio). Also, the question slide audio can be a very short and silent piece of audio, so nothing is heard on the question slide itself.
Bruce

Getting Audio to play in the Background but only over a small selection of slides?

Hope someone can help with this. I have a module at the moment which I have created and I want to run some cheesy suspense driven quiz show music over my end of module quiz. I have to admit to being fairly new to a lot of Captivate and I have looked at Audio options and am struggling a bit. I want to add Audio to just ten or eleven slides of the 100 odd in my project. If I add to my project audio as background audio it plays over everything. I see the button to stop it but it appears to be per slide and that seems crazy when I only want it on a small percentage of the project. I also see I can add audio to individual slides but then the audio stops as the slide pauses which when doing a quiz just doesnt work. Does anyone know if and if so how I can audio to play over just these ten slides without the playing of the music being affected by the playhead. I would have thought multiple audio sources as background music must be something lots of peopel want and use. It cant just be me? Any help woudl be massively appreciated.
Thanks in advance
Jay

Huh. I could have sworn I'd done it before, but I just tried in 5.5 and a 6.0 trial, and the audio section in the properties panel completely disappears when I select mutliple slides... Strange.
It's a shame you had to go through such a long project slide by slide, Jay; I feel your pain. I'm not sure what else to suggest for future projects if that method doesn't work...
If your project doesn't have any other audio, you could perhaps mute the project audio on the slides that you don't want background audio (the Action section in properties allows you to set an "on enter" action when you have mutliple slides selected). Or if you have audio on all your slides but the background audio slides, you could configure the background audio when importing to have 0% volume on slides with audio. But those are two rather specific cases.

Audio not playing in mov format K'08

Ive seen a lot of threads but none had a solution to this.
With the slides, I included an mp3 from within itunes
dragged it from the media window into the documents soundtrack box
clicked looped
and played just fine throughout the manual presentation.
clicked export to .mov
checked include audio files
when the mov plays it is silent.
I tried one workaround, using the newly recorded audio file reimported into keynote 08 and exported again - still silent
has anyone figured out how to get the audio to play in .mov?
thanks

Believe it or not, I've been having this same problem since I bought my Imac G5 a few years ago. It just happened to my MacBook Pro, as well. Along with the fact that mpg audio is gone, so is flash audio. It seems to happen every so often, usually after one of my computers hang while loading a preview for a flash movie. The problem actually seems to correct itself after a few restarts, or loading of some programs.
In the process of writing this post, I regained support for mpg audio, and flash audio - and in quicktime player for that matter. When I started writing this, it didn't work. I dunno, quicktime is weird that way. The longest time I was without flash or mpg audio was for a period of 3 weeks. After which, it somehow was magically there again. I wish that wouldn't happen, as it usually happens at the most inconvenient times. The whole way flash is not supported through newer versions is rather irritating as well isn't it? Use SAFlash player for mac for those if you can: http://www.adobe.com/support/flashplayer/downloads.html
(sorry a little off topic there)
MacbookPro17" Mac OS X (10.4.7) Imac G5, PowerMac G3, Mac LC

QuickTime movie made in QuickTime 7 audio not playing back in qt 10

I made a qt using qt 7 pro, H.264 with the AAC audio compressor and that qt will not play back audio in QuickTime 10 which is what my client has on his computer.

The point being here is that I rendered out a movie in QuickTime pro 7 and the audio isn't being resolved in QuickTime 10, even on my own computer.
Does the audio play correctly in the QT 7 Player? Have you determined if this is a playback or a conversion problem? I asked about the source file since some source compression formats will not convert the audio using QT 7 Pro. In a similar manner, some AAC data rate and sampling rate combinations are not supported on the Mac which is why QT is programmed to disallow their use. (Unfortunately, I do not know what would happen if a source file using such audio settings were to be used as a source for a QT 7 Pro conversion.)
How is this possible and should I just remove qt10 altogether?
As already indicated, there are a number of "normal" problems that could give these results. In addition, QT changes made as part of the most recent Lion OS update seem to have had adverse effects on QT 7 Pro features (as evidenced by the loss of the "loop" playback feature and "green screen" problems on some platforms). As to the removal of QT 10, the embedded structures cannot be removed without corrupting the operating system. And, while the QT X player can be removed/deleted, why bother since you can just as easily opt not to use it for manual playback and restoring it, should you later change your mind, may present a problem.
I am a professional editor, have been working on Macs since 1992 (Avid and FCP7) and have never had a compatibility problem like this before within the Mac environment.
Have you made any recent changes to your normal work flow that might account for this problem and is the problem consistently repeatable?

Merged clips audio not playing

Is there a reason why my merged clips no longer play audio?
Also is there a way to batch merge clips? I had to individually sync my whole project one video/audio clip at a time...a little disappointing to do all that work and come back to my project where the audio won't play.

Might be a good idea for a feature request.
Adobe - Feature Request/Bug Report Form
On the not playing issue, I'm sort of stumped. It's just always worked for me, and it's not an issue I recall seeing reported here by others.
Maybe try recreating the merge?

Embedded Audio not playing - Flash Player 10.0.45.2

Hi
With the recent update of the Flash player I noticed that random *.swf files containing just embedded *.wav files will not play.
The only things that seem to fix this problem are;
Change the audio publish settings and republish
Or createa new *.fla and republish
Can anyone explain why this is happening? Is this bug temporary?
Thanks,
Joseph

Hi, the Flash forum was down in my area. Here is a link that you may just bookmark as it most likely have everything FP, just something to keep handy:
http://www.adobe.com/devnet/flashplayer/articles/flash_player_admin_guide.html
This is the FP Installer for Internet Explorer that you download to and run from your Desktop:
http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe (Not the debugger version)
This is the FP Installer for Firefox(or other browsers that FP supports) Download to the Desktop & run from there.
http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player.exe
When that Uninstaller was used for the 10.1, if I'm not mistaken it Uninstalls FP from all browsers.
I'm sure you are familiar with the ActiveX Settings and using the Administrator account to have the permissions to Install the ActiveX Control and write to the Windows Registry. Adblock in FF will need to be disabled if you use it and any pop up blocker software installed. You may want to refer to the Uninstall instructions for further info:
http://kb2.adobe.com/cps/141/tn_14157.html
You may also want to review the Troubleshooting guide to head off any issues before rather than after:
http://kb2.adobe.com/cps/191/tn_19166.html
Usually I cover the "prep" info but since we didn't discuss that, thot I'd post it, so if you need it you have it.
If you have any questions, just post. If you want the debugger version, I'll need to find the link.
Thanks,
eidnolb

Captive 6 audio not playing in preview

I am having an issue with audio playing on some of the slides in preview mode, other slides the audio works fine. On the problem slides, I am able to play the audio on the slide or timeline but in preview mode it will not play.

Which Preview mode? If it's the "Play this slide" preview, perhaps you have managed to mute the audio?
Look at the image below for reference.
Cheers... Rick

SWF Audio not playing in Captivate

Hi everyone,
I have created a button panel in Flash. The panel is a
recreation of an A/V control system panel used in classrooms on
campus. I am using a Captivate presentation to teach university
professors how to use the panel, so they can use technology to aide
teaching in classrooms.
As soon as the swf loads (in flash player) a sound begins to
play. You can then press the volume and mute buttons to increase,
decrease, or mute the sound. The button panel works properly in
flash player, however, when I import the swf into Captivate and
preview or publish the slide, the sound does not play. The buttons
depress, the lights change, but no sound is heard.
1) What, if anything, am I doing wrong?
2) What can I do to fix it?
I've only been working with Captivate for a few months now,
so this is my first real challenge. Any help you could offer would
be great. Let me know if you need anymore information. I have
exported the swf using flash 9,8,7, and 6 and that has not solved
the problem.

Okay, so here's the deal,
I used a flash 6 version of the panel and exported project
into a flash 7 version. when I play it, the sound still does not
work, but here is where it gets funny:
When I exported the project to include the html I also got a
version of the project without the captivate skin. When I open
that, the sound from the 16th slide (button panel) begins to play
on the first slide and continues to play. when I get to the 16th
slide and press the volume and mute buttons, they control the sound
perfectly.
So,
1. How/why is the captivate skin killing my audio?
2. What can I do about it?
3. How do I get the audio to start playing when I enter the
16th slide only?

Audio not playing in FLV export

I created a video with seperate narration place in it. when i export the file to an FLV, not changing any of the settings for the widescreen ntsc preset. the exported file does not play the audio.

Which player is set as the default for FLV file types?
I have seen similar issues with VLC Player (normally a great software player), but when played in Adobe Flash, or MediaPlayer Classic HC, they played just fine. That is why I was asking about the player program used.
Also, when you run one of the FLV's through MediaInfo, what are the details of the Audio Stream?
Good luck,
Hunt

Audio not played for Motion Background

Similar Messages

Maybe you are looking for