Audio not playing in clips in exported movie

Hi,
I have a 4 minute movie made up of a load of clips, and two iTunes mp3s. All the clips are muted and the music plays over them - except for a short section in between the two songs, where the clips are unmuted. The movie plays as it should in the application, but when exporting it out, the clips I want to hear between the songs are muted and there is no audio.
Any suggestions on how to fix it?
Richard

Do not use MP3's convert them to AIFF files with QT
Daniel C. Slagle
Keeper of the "Unofficial" iMovie FAQ
I may receive some form of compensation, financial or otherwise, from my recommendation or link

Similar Messages

Audio not played for Motion Background

I have created a movie in my NLE as a motion background for a menu in Encore 2.0. When I preview the dvd project after rendering the audio plays fine but when I burn to dvd the audio is missing but the motion video still plays.
Why is this audio not playing on the burned dvd

In what form is the motion background when you bring it into Encore? Is it an avi? Is it compressed?
Is the audio stream a separate file?
If separate, is the audio stream a different length to the video file? Is the audio stream just a .wav file or what?

Premiere CC 2014 audio not playing

Audio not playing in some projects, either in reference mon or timeline, but plays in other projects.
Premiere CC latest
MAC 2.66 Gh i7 8GB RAM NVIDIA GeForce GT 330M 512 MB
OSX Mavericks /256GB SSD (P
1TB HD write disc

Moving to Premiere forum

HT1657 my movie rental downloaded but it will not play. I rented a movie yesterday so I know that my laptop is capable. I can see images of each chapter but the movie won't play. Any idea?

my movie rental downloaded but it will not play. I rented a movie yesterday so I know that my laptop is capable. I can see images of each chapter but the movie won't play. Any idea?

Hi there kirk279,
You may find the troubleshooting steps in the article below helpful.
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
-Griff W.

Everything plays perfect (audio & video). Mute clips after exporting (sounds fine when not exported)

Alright... this is the 1st time I use Adobe Premiere CS5.5, and I´m using the trial version.
I hope the image I uploaded is clear, but if I click PLAY while I ´m using the program, everything plays absolutely perfect.
Problem is when I export. If you can see there, there are like 7 audio bars there, I don´t know if that could be a problem, but I can´t seem to put all of them into a single track.
The main audio files DO play in the exported movie, but many others do not...
Any help??? I really need to fix this.

Microsoft AVI
preset: custom
Audio coded: uncompressed
Channels : stereo
sample type: 16bit
Video codec: DV PAL
ASPECT: D1/DV PAL(1.0940)
(CHECKED): use max. render quality
use frame blending
use previews
(not checked) render at max. depth
I hope this is helpful

Audio not playing in mov format K'08

Ive seen a lot of threads but none had a solution to this.
With the slides, I included an mp3 from within itunes
dragged it from the media window into the documents soundtrack box
clicked looped
and played just fine throughout the manual presentation.
clicked export to .mov
checked include audio files
when the mov plays it is silent.
I tried one workaround, using the newly recorded audio file reimported into keynote 08 and exported again - still silent
has anyone figured out how to get the audio to play in .mov?
thanks

Believe it or not, I've been having this same problem since I bought my Imac G5 a few years ago. It just happened to my MacBook Pro, as well. Along with the fact that mpg audio is gone, so is flash audio. It seems to happen every so often, usually after one of my computers hang while loading a preview for a flash movie. The problem actually seems to correct itself after a few restarts, or loading of some programs.
In the process of writing this post, I regained support for mpg audio, and flash audio - and in quicktime player for that matter. When I started writing this, it didn't work. I dunno, quicktime is weird that way. The longest time I was without flash or mpg audio was for a period of 3 weeks. After which, it somehow was magically there again. I wish that wouldn't happen, as it usually happens at the most inconvenient times. The whole way flash is not supported through newer versions is rather irritating as well isn't it? Use SAFlash player for mac for those if you can: http://www.adobe.com/support/flashplayer/downloads.html
(sorry a little off topic there)
MacbookPro17" Mac OS X (10.4.7) Imac G5, PowerMac G3, Mac LC

QuickTime movie made in QuickTime 7 audio not playing back in qt 10

I made a qt using qt 7 pro, H.264 with the AAC audio compressor and that qt will not play back audio in QuickTime 10 which is what my client has on his computer.

The point being here is that I rendered out a movie in QuickTime pro 7 and the audio isn't being resolved in QuickTime 10, even on my own computer.
Does the audio play correctly in the QT 7 Player? Have you determined if this is a playback or a conversion problem? I asked about the source file since some source compression formats will not convert the audio using QT 7 Pro. In a similar manner, some AAC data rate and sampling rate combinations are not supported on the Mac which is why QT is programmed to disallow their use. (Unfortunately, I do not know what would happen if a source file using such audio settings were to be used as a source for a QT 7 Pro conversion.)
How is this possible and should I just remove qt10 altogether?
As already indicated, there are a number of "normal" problems that could give these results. In addition, QT changes made as part of the most recent Lion OS update seem to have had adverse effects on QT 7 Pro features (as evidenced by the loss of the "loop" playback feature and "green screen" problems on some platforms). As to the removal of QT 10, the embedded structures cannot be removed without corrupting the operating system. And, while the QT X player can be removed/deleted, why bother since you can just as easily opt not to use it for manual playback and restoring it, should you later change your mind, may present a problem.
I am a professional editor, have been working on Macs since 1992 (Avid and FCP7) and have never had a compatibility problem like this before within the Mac environment.
Have you made any recent changes to your normal work flow that might account for this problem and is the problem consistently repeatable?

Merged clips audio not playing

Is there a reason why my merged clips no longer play audio?
Also is there a way to batch merge clips? I had to individually sync my whole project one video/audio clip at a time...a little disappointing to do all that work and come back to my project where the audio won't play.

Might be a good idea for a feature request.
Adobe - Feature Request/Bug Report Form
On the not playing issue, I'm sort of stumped. It's just always worked for me, and it's not an issue I recall seeing reported here by others.
Maybe try recreating the merge?

Audio not playing in FLV export

I created a video with seperate narration place in it. when i export the file to an FLV, not changing any of the settings for the widescreen ntsc preset. the exported file does not play the audio.

Which player is set as the default for FLV file types?
I have seen similar issues with VLC Player (normally a great software player), but when played in Adobe Flash, or MediaPlayer Classic HC, they played just fine. That is why I was asking about the player program used.
Also, when you run one of the FLV's through MediaInfo, what are the details of the Audio Stream?
Good luck,
Hunt

Audio not playing in Time line

I am using CC and just imported a project in to begin editing. I have been using Premiere since 2010 and never experienced this. In the project monitor everything plays fine but in the timeline I ge no audio. When I drag the clip in the audio will not stay synched and I can not drag the audio separately. The clips are AVCHD. What am I doing wrong?

And what exactly do you mean with "audio separately"? If you do a right-mouseclick on the clip, you can remove the link between audio- and videoclip (in the german version it's called "Verknüpfung aufheben"; Unfortunately I don't know, how it's called in the english Premiere Version...). After, you can move the audioclip separately from the videoclip.

Audio not playing in CC 2014

Hi all,
I have seen a few threads with the problem I am having, but not exactly. And still no solutions.
So often, like 3-4 times a day when I open an existing project or even start a new one the audio will not play from any of the clips I am using. This happens both in the timeline and in the source viewer. I can see the waveforms, I can see he meters going, just can't hear anything
Here's what I have done:
Checked audio hardware in PP and on my system. Audio plays fine out of the system and the audio hardware is set to the correctly.
Changing the audio hardware output does not help. I use a Bose Speaker system, but changing to internal speakers does not help.
I am waiting the required time to allow the project to conform.
The problem arises in every clip in the project, which include a number of different sources.
I have trashed preferences in PP. Did not help.
The only way I can get it to work is to reboot, and even then that does not always work. Sometimes I have to reboot a few times.
SYSTEM
10.8.5
MacPro 2x2.66GHz 6-Core Intel
Current version of Premier Pro CC 2014
Any suggestions would be appreciated. Thanks.

I'm having an issue where some of or all of the audio tracks just drop out during playback (green bar). I have to stop/start the playback and all is fine until the next random time it does it.

SWF Audio not playing in Captivate

Hi everyone,
I have created a button panel in Flash. The panel is a
recreation of an A/V control system panel used in classrooms on
campus. I am using a Captivate presentation to teach university
professors how to use the panel, so they can use technology to aide
teaching in classrooms.
As soon as the swf loads (in flash player) a sound begins to
play. You can then press the volume and mute buttons to increase,
decrease, or mute the sound. The button panel works properly in
flash player, however, when I import the swf into Captivate and
preview or publish the slide, the sound does not play. The buttons
depress, the lights change, but no sound is heard.
1) What, if anything, am I doing wrong?
2) What can I do to fix it?
I've only been working with Captivate for a few months now,
so this is my first real challenge. Any help you could offer would
be great. Let me know if you need anymore information. I have
exported the swf using flash 9,8,7, and 6 and that has not solved
the problem.

Okay, so here's the deal,
I used a flash 6 version of the panel and exported project
into a flash 7 version. when I play it, the sound still does not
work, but here is where it gets funny:
When I exported the project to include the html I also got a
version of the project without the captivate skin. When I open
that, the sound from the 16th slide (button panel) begins to play
on the first slide and continues to play. when I get to the 16th
slide and press the volume and mute buttons, they control the sound
perfectly.
So,
1. How/why is the captivate skin killing my audio?
2. What can I do about it?
3. How do I get the audio to start playing when I enter the
16th slide only?

Why does my audio not play from an imported pptx slide +

I created a slide with Images, animations and audio in PowerPoint (2010) and then imported into Captivate 7 as a single slide*. When I publish the slide into an swf file and play, the follows issues occur:
One of the images does not display as contained in the pptx file - it does however show in the swf file in the same dimensions in alight wood grain image (like pine). This image is in one corner of the slide. The image below is that corner...!
The audio does not play when the swf is played. No audio content is shown in the library list
Also, the program I wish to insert the slides into requires individual slides - not whole presentations (it is not SCORM compliant). What is the quickest way of publishing a multi-slide presentation into individual .swf slides?

reinstall the movie, something crazy may have happened during the download, reinstalling it should fix the problem

Quicktime X will not play some Apple Mpeg 4 Movie Files

Hi,
Having a strange issue. Quicktime X will not play some of my Apple Mpeg 4 Movie files anymore.
The files open fine in Quicktime 7, but not Quicktime X.
I receive the error message "The document could not be opened. A required Codec is not available"
I have installed other codecs (Flip4Mac as well as Perian), but no luck. Have re-installed Quicktime X (10.1) and software is all up to date (running Lion 10.7.2). The movie file works fine if I import it to iTunes as well.
Called AppleCare Support and they could not come up with an solution. Does anyone here have any ideas?
Thanks!

(BTW, I just realized this was an MPEG-4 topic - my issue wasn't necessairly centered around that architecture)
Yes, I naturally assumed that you were having problems at some point with MPEG-4 Part 2 or Part 10 content.
Since I mentioned "from," I should have mentioned what the codec/wrapper was (it was captured into a .mov file using DV/NTSC via "Capture Now" in Final Cut Pro studio V7, via an analog-to-digital converter). What makes this confusing is that files captured with the same settings sometimes open right into QuickTime X with their audio/video intact, and at other times, only the audio shows up (where upon opening that same file in QT 7, we can see both audio and video). Interestingly, the problem files icon shows up on the desktop as the generic movie icon, whereas the "normal" files' icon is the first frame of the video.
May we assume at this point that the source video data is DV-25 with 16-bit Interger (Linear PCM) audio sampled at 48.0 KHz and it is the scratch MOV file that may or may not open/play correctly in QT X but always opens correctly in QT 7?
Ultimately, though, this is an unimportant point in solving my issue. Why? Well, if I can successfully open the problem files in Compressor (e.g., see/hear the video/audio), then I can theoretically re-compress (or "re-wrap?") them to whatever codec I want - ideally one 100% compatible with QuickTime X.
I took a test file, placed it into Compressor, and applied the DV/NTSC setting to it (yes, I know, the same setting the file already had). After re-encoding (which took very little time), the file was perfectly executable in QuickTime X - both Audio and video showing as to be expected, and no real difference in quality (not that VHS source is quality to begin with).
This sounds as if the "problem" file's container may be the source of the problem. As I don't know if your Compressor test is passing the data through to a new faile container, I would make an additional test here. If your version of QT 7 is keyed for pro use, I would simply use the "Save As..." File menu option to to create a new file container. In fact, I would probably just create a "reference" file rather than another "standalone" file here—a very, very fast operation—and then open the secondary file in the QT 7 "Properties" window to ensure all of the data tracks (1 video, 2 audio, and 1 timing) are present. If all looks good, I would then try opening the reference file in QT X to see it it now plays. (I.e., whether you use a reference file here or a standalone file, the object is to see if the QT X player will now recognize all contained data tracks whether resourced by reference or physically contained in/via the new wrapper.)
Could this have been answered without knowing the complete "from" specs? Probably… which is why I posted to the help forum in the first place - the goal being some other reader may have had the same issue, and had a handy solution or suggestion, saving me the time of experimentation (what forums are great for).
I don't know about you, but I would still be looking at profile/level combination settings to see if an an assumed MPEG-4/AVC video and/or AAC audio settings had been properly encoded for QT playback.
I have no doubt that there's a technical difference between the files that created this issue in the first place. But, the solution of re-compressing with an identical codec did the trick, which for this project is good enough for me.
Recompressing data is slower than rewrapping data which is slower than rereferencing the data pointers. But, if your solution works, then that is all that matters.

Voice Over Audio Not Playing

iMove crashed and after restore voiceover audio and any new audio recorded does not play. I can see the wave form there but no audio plays from it. Same with music track.
How do I recover my audio tracks?

SOLVED
Found ONE short audio voiceover that showed a yellow triangle. I removed it and the whole projects audio was restored.
Really stupid that one bad clip takes out all the audio in a project.

Audio not playing in clips in exported movie

Similar Messages

Maybe you are looking for