Audio not playing in Preview

I have a slide that audio was recorded within Captivate. When I play the slide the audio does play, but when I preview/publish, the audio is not there. I have three caption boxes that fade in during the slide presentation. Not sure if this could be affecting it. Any ideas out there?

Check under Preferences > Project > Publish Settings to see if the box for Include Audio is checked.

Similar Messages

Captive 6 audio not playing in preview

I am having an issue with audio playing on some of the slides in preview mode, other slides the audio works fine. On the problem slides, I am able to play the audio on the slide or timeline but in preview mode it will not play.

Which Preview mode? If it's the "Play this slide" preview, perhaps you have managed to mute the audio?
Look at the image below for reference.
Cheers... Rick

Captivate 6 Audio not playing in preview

I have been inserting audio recordings into my Captivate 6 project slides with no problem. I inserted them, clicked play, and they worked. This morning, however, I found none of my audio would play when I click Play at the bottom of my Timeline. It will play from the slide audio window when I double click the audio. It will play when I click the Preview button under the Insert Menu. So why will it not play from the play bar under the timeline? Any Ideas?
Thanks,
Darin

Hi there
When this happens to you next time, perhaps it would be helpful to double check a place you may have clicked and not realized it. Sure, clobbering the preferences nailed it, but that's a bit like using a bazooka to kill the fly in the room.
Too late now, but my guess is that this is what happened.
If you look at the Timeline area you should see a small speaker icon as shown below:
It's easy to click this and there isn't much of an indication you have muted the slide. My guess is that you managed to click this earlier. Too bad you had to clobber preferences to get it back.
Cheers... Rick

Captivate 3 Text/Audio NOT playing when previewed

I am able to see text boxes and hear the audio by playing the slide in edit mode but when I go to preview - no matter how - they do not present themselves. The timing of the slide is still the same length as if they did play (i.e. 60 seconds of text/audio in edit mode...60 seconds of silence and blankness in preview mode).
Thank you for your wisdom
JC

How did you preview? Have you tried to publish and do you the same issue then?
Lilybiri

Audio not played for Motion Background

I have created a movie in my NLE as a motion background for a menu in Encore 2.0. When I preview the dvd project after rendering the audio plays fine but when I burn to dvd the audio is missing but the motion video still plays.
Why is this audio not playing on the burned dvd

In what form is the motion background when you bring it into Encore? Is it an avi? Is it compressed?
Is the audio stream a separate file?
If separate, is the audio stream a different length to the video file? Is the audio stream just a .wav file or what?

Premiere CC 2014 audio not playing

Audio not playing in some projects, either in reference mon or timeline, but plays in other projects.
Premiere CC latest
MAC 2.66 Gh i7 8GB RAM NVIDIA GeForce GT 330M 512 MB
OSX Mavericks /256GB SSD (P
1TB HD write disc

Moving to Premiere forum

IMovie, some photos on timeline will not play in preview window

There are a bunch of photos on the timeline that will not play in preview window.
I've tried all the tricks that were suggested in other posts. (moving photo to the desktop and then reimporting, etc)
several hours have been lost on this problem.
IOS 10.7.5
iMovie '11 rev. 9.0.9

I think it's a bug. It happens to me as well. You have to switch between windows, refreshing it.

Captivate 4 TTS Audio not playing in published or preview ok in edit

While viewing my project in published view, audio did not play on 5 of my 70 slides. (It worked fine previously). It played Ok in edit but no sound in preview or published. I tried to replace the audio using the Convert TTS button, and the audio would not replace the previous audio. Even removing the audio and dragging the new audio to the timeline would not work. I reinstalled Captivate 4 and TTS, and it seems to work fine on new a new projects but I can not seem to get it to fix my current project. Can anyone advise if I can fix those slides, or have I somehow corrupted those slides? It's a big project. Thanks in advanced

If I ever see dodgy behaviour like this on a slide, and it doesn't resolve easily with a reboot or republish, I just recreate the slides and delete the old ones. It's often far quicker to do this than muck around trying to fix them. If there is corruption in a slide, you don't want it anywhere in your project.

Audio file not playing when previewed or pulised on only one slide

I have one slide that the audio will not play unless the you click on the play button in preview or when published. All other slide audios are working fine and will play automtically when the next button is clicked on the previous slide. I have tried changing the name of the audio file, deleting the sled and the fiel and staring over etc. the audio file were created in another program and then brought into Captivate but thia has not been a problem with any other production up to this point. Any suggestions?

I will be out of the office starting 22/10/2009 and will not return until
28/10/2009.
If you require urgent assistance then please contact Emma Dawson on 15832
alternatively I will respond to your query on my return.

Audio not playing in mov format K'08

Ive seen a lot of threads but none had a solution to this.
With the slides, I included an mp3 from within itunes
dragged it from the media window into the documents soundtrack box
clicked looped
and played just fine throughout the manual presentation.
clicked export to .mov
checked include audio files
when the mov plays it is silent.
I tried one workaround, using the newly recorded audio file reimported into keynote 08 and exported again - still silent
has anyone figured out how to get the audio to play in .mov?
thanks

Believe it or not, I've been having this same problem since I bought my Imac G5 a few years ago. It just happened to my MacBook Pro, as well. Along with the fact that mpg audio is gone, so is flash audio. It seems to happen every so often, usually after one of my computers hang while loading a preview for a flash movie. The problem actually seems to correct itself after a few restarts, or loading of some programs.
In the process of writing this post, I regained support for mpg audio, and flash audio - and in quicktime player for that matter. When I started writing this, it didn't work. I dunno, quicktime is weird that way. The longest time I was without flash or mpg audio was for a period of 3 weeks. After which, it somehow was magically there again. I wish that wouldn't happen, as it usually happens at the most inconvenient times. The whole way flash is not supported through newer versions is rather irritating as well isn't it? Use SAFlash player for mac for those if you can: http://www.adobe.com/support/flashplayer/downloads.html
(sorry a little off topic there)
MacbookPro17" Mac OS X (10.4.7) Imac G5, PowerMac G3, Mac LC

SWF Audio not playing in Captivate

Hi everyone,
I have created a button panel in Flash. The panel is a
recreation of an A/V control system panel used in classrooms on
campus. I am using a Captivate presentation to teach university
professors how to use the panel, so they can use technology to aide
teaching in classrooms.
As soon as the swf loads (in flash player) a sound begins to
play. You can then press the volume and mute buttons to increase,
decrease, or mute the sound. The button panel works properly in
flash player, however, when I import the swf into Captivate and
preview or publish the slide, the sound does not play. The buttons
depress, the lights change, but no sound is heard.
1) What, if anything, am I doing wrong?
2) What can I do to fix it?
I've only been working with Captivate for a few months now,
so this is my first real challenge. Any help you could offer would
be great. Let me know if you need anymore information. I have
exported the swf using flash 9,8,7, and 6 and that has not solved
the problem.

Okay, so here's the deal,
I used a flash 6 version of the panel and exported project
into a flash 7 version. when I play it, the sound still does not
work, but here is where it gets funny:
When I exported the project to include the html I also got a
version of the project without the captivate skin. When I open
that, the sound from the 16th slide (button panel) begins to play
on the first slide and continues to play. when I get to the 16th
slide and press the volume and mute buttons, they control the sound
perfectly.
So,
1. How/why is the captivate skin killing my audio?
2. What can I do about it?
3. How do I get the audio to start playing when I enter the
16th slide only?

Background Audio not playing in Captivate 4

I imported a background audio track to my Adobe Captivate project, and I can see it in the background audio menu, however, when I preview or publish the project, it does not play. When I am in the import menu, it plays, but only there. I have done this many times before without issue. Any ideas?

Hi there
I am not sure if I understood the problem correctly. I tried to add a background audio to a test project and it worked fine for me in preview and publish.
When you say "I can see it in the background audio menu" are you meaning the following?
Audio->Background Audio... ==> Audio Background Dialog opens up and the audio track is shown properly. In library, the use count of this audio is non-zero and when you right click on the audio and select usage, "Project" is listed as one of the users.
When you say "When I am in the import menu, it plays, but only there", which import menu are you taking about?
Can't the audio be played from the library preview or from audio properties dialog or from Audio Background dialog?
Do you have this problem with any project that you are creating or is the problem happening in one particular project only? If it is only a particular project, can you share the CP project?
Cheers
Siva

Audio not playing - i have already checked publish settings

I am using Captivate 5. My project was working fine, but I had to go in and re-record a few slides. I saved my audio file and then went to preview my project. No audio will play. My highlights, click boxes, buttons, etc still come up at the right time, but there is no audio.
The audio plays when i am not previewing it, and just click to play the audio. It also plays when i go in to edit audio. The only time it doesn't seem to work is when i am previewing the project.
There must be a setting I accidently changed somewhere when updating my recording?

I closed out of the project completely and reopened it. Now the audio is working again.... weird, but I guess problem solved.

Audio wont play in preview

Hi
I have dropped and dragged a 'aiff' audio file into the preview drop zone audio box, but the audio just wont play during the DVD preview.
Any ideas?

Hi Mantas65
Welcome to apple discussions. Assuming the stop motion button within preview is not currently activated, are both sliders for audio at least half way? There's a slider for the preview that controls audio level and also one within the audio well for the aiff you are planning to use. Let's take an example (as in the photo below of preview within iDvd):
click here:
At the foot of the above image, move the slider to the right so you can listen to the current audio for Revolution Main for example. Now drag and drop the desired audio file you wish to replace it with. In the example below I've chosen "Bittersweet Symphony" but you also must make sure the slider in this audio well is not set to its lowest level which iDvd at times will default to. So simply drag the slider to the right half way or higher.
click here:
If you have already done both the above steps and you still have no audio, then it's very possible the audio file is corrupted. Try a different audio file to make sure.
Hope this helps but if not just come on back.
Message was edited by: SDMacuser

ITunes 10.6.3 not playing song previews at all

Since Wednesday my iTunes 10.6.3 is not palying song previews at all. Clicking the play radio button shows it response as poitning at it I can see teh stop button. But no sound no movement on the playback progress bar at the top. I have upgared to Mountain Lion but this problem started a week before the upgrade. I have reinstalled iTunes twice and checked on my other Macbook same problem. Frustrating as one cannot buy song beofre previewing.

Hi,
yes I understand that. I assume that your mac is "authorized"? You might also have a problem with IPV6 causing interferrence. Have a look here: https://discussions.apple.com/thread/3202188?start=0&tstart=0
to turn off IPV6.

Audio not playing in Preview

Similar Messages

Maybe you are looking for