Audio not rendering in FCP 5.0.1

I'm not able to render any audio in the Timeline. The clips are brought in as QT files (not captured). When trying to audio render as is, the audio render window quickly flashes w/no change in render status. (line at top remains red). Video renders OK, but even de-linking the audio isn't working. When attempting to Export (hoping audio will render then) I get "General Error -36" I was able to render one audio clip by de-linking ONCE, but that doesn't work either. If there was a patch/fix placed online pls advise.
Thanks!
TTYL
AP

I am also having a similar problem. While things were working fine for awhile, I tried to add a new audio track and now nothing will render. It flashes as if it will render and then disappears without anything. Ive tried exporting the project as a .mov and re-opening in a new sequence, but even there the audio is causing a need to be rendered. Ive switched music files into aiff form, and done everything else I could think of.. as well as looking on forums for hours. If you have any suggestions, that would be fantastic.
Thanks

Similar Messages

Audio not rendering

Using Final Cut Pro 4.5, and a lot of the time the audio simply refuses to render. A render box will pop up on the screen for a split second and then disappear.
I thought I was using the wrong render option, but I tried a whole stack and nothing worked. Has anyone else experienced this? Is there a way around it?

sometimes the audio does not render in fcp if it's an mpeg. i noticed that with my fcp. i always use a wav. or aif. file to use music and it renders find. or you can convert it in soundtrack pro (if u have this software or another audio software to do this).

Audio not rendered - but when I tell FCE to render it, nothing happens

When I pull in some DV files, FCE shows my audio as not rendered, with that red line. So I tell it to render it, and nothing happens. I get a very brief flash of the rendering progress bar, the red line disappears, but the audio remains unrendered because when you play it you get silence (I have turned off the annoying "beeping").
Even if I save the project, or quit and restart, or tell FCE to render everything, my audio remains stubbornly unrendered.
Any suggestions?

Hey, I had the same thing happen to me. I'm not sure if this is the best answer, but in order to get it to render, i had to select the audio in the timeline and in the menu, i select Render Only --> Needs Render. That worked for me. Hopefully that will solve your problem too. Good luck!

Importing files, audio not rendered

Hi, I am new to final cut. I am in the middle of something and need a hand. I have footage that was captured with imovie that I want in my final cut project. I open the package content of the imovie project, made an alias of the media folder and placed it on desktop so when I was in final cut and went to import files I could select the ones i NEEDED. However, and its not only with the imovie files but all video files in general is that k, when I double click and view in my edit monitor, there is audio, when I drag the clip into the timeline, I get the red line at top and beep noise cause my audio is unrendered. Any help with this work around or am i FORCED to work with imovie on this one. Cause there is alot of pffotage and I bet rendered this much footage would take along time. Thanks

Well, I tried what you said but no go. Basically what I did to was I astarte a whole new project with nothing imported from a camera or anything. I then went to import, files, clicked a the quicktime dv file. it added it ot my project folder. I then double clicked it, pressed play, audio there, then brought it into the timeline, render bar still there. So I am not suer what the problem is here. as I said before, this happens to any file that is quicktime or avi, etc. why does it want to render the audio so bad, why wouldn't it just play it in the time line like it does in the editor panel

Audio not rendering properly

I am experience some strange audio issues, I have not changed any settings but for the last few exports the audio got all screwed up especially when exporting either via compressor or Quick time. I have a AUparametricEQ filter on my audio and it worked fine in the past but now when exporting the video with the audio the audio is all mumbled, it takes audio from earlier in the track or it goes back and forth at one note. The audio normally plays fine when just playing back in Final cut. Even though yesterday it also got messed up when playing back, I took the Filter of and reapplied the filter on the spot which played back bad and it was fine. It usually happens when final cut renders in the background and the files have the light blue strip on the top which i never really saw.
any idea what the issue can be. As said earlier i have not changed any settings also i was using the filrer in the past all the time and no problems .

Hi
Have you tried this:
http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/lost-sound/m-p/4231472
Regards
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Audio not working in FCP 7 viewer

I was working on a project on FCP 7 and everything is fine. I stepped away from my computer for a few minutes and now the audio on the viewer doesn't work! The audio on the sequence works fine. But the audio from a clip on the viewer isn't working. Could it be a KONA LHe issue?
Can anyone help? Much thanks!

Whenever FCP begins to act in unexpected ways, usually the first step is to trash your FCP preferences.
You can download Preference Manager (free) from Digital Rebellion and it will do it for you.
http://www.digitalrebellion.com/prefman/
Your preferences will be reset to default values the next time you launch FCP.
MtD

Extracted Audio Not Rendering?

I use Premiere Pro in conjunction with Audition for making videos on my YouTube channel. Recently, I have tried to render videos and all the audio that I have right-clicked and hit "Edit in Adobe Audition", then edited, is rendering as silence. It all plays back perfectly, with the effects in the timeline, but when I render, there's nothing. I'm using the same preset as I always do and has worked before, but to no avail. If I don't edit the clip in Audition, it renders fine, but if I do, there's just silence. I'm rendering in .mp4 in 1280x720 and have plenty of hard drive space, and like I said, I'm using the same preset, so I don't know what is wrong. I've been researching for a few days now and haven't found anything. Thanks for the help!

Under the Sequence menu, make sure all the appropriate render types are checked.
-DH

Export Quicktime movie is not rendering video track, just the audio track. However, everything works when using Quicktime Conversion menu options. What is wrong with my setting for Export Quicktime movie?

Export>Quicktime movie is not rendering video track, just the audio track. However, everything works when using Quicktime Conversion menu options. What is wrong with my setting for Export>Quicktime movie?

When you converted the original files via MPEG Streamclip, what did you convert them to?
Have you tried trashing your preferences in FCP? Trashing FCP prefs is usually the first step when FCP is performing strangely.
Download Preference Manager from Digital Rebellion (free) at:
http://www.digitalrebellion.com/prefman/
It will allow you to archive your current preferences if you wish to restore them later.
MtD

With 10.2 I can only use system speaker output for audio, NOT my RME FF400 I used previously. The FF400 works fine with other apps. How can I set this device in FCP 10.2? (it is set in both system preferences and midi)

With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.

From the fcp.co forum. See if this does anything for you.
simon_hutchings
OFFLINE
Junior Boarder
Posts: 24
Thank you received: 5
Karma: 1
I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
1. Open the application Audio Midi Setup (located in Applications : Utilities)
2. Select the Output Tab for the current output device
3. Select the Configure Speakers option
4. Select the Multichannel tab
5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked.

Audio not in Sync with Video in FCP

Hi People, i'm new to this, hoping to find some support.
I have Final Cut Studio 2, im doing an Apple Pro Training series book - 'Final Cut Pro-Beyond the Basics' and im having a problem of the audio not syncing with the video. If i simply play the sequence, the video is ahead by about 7 seconds, and if i stop and start playback (edit) it remains out of sync. However, if i let the sequence play through and loop, when it restarts at the beginning, it appears fine and all fixed, until i stop plyback and start it again. So, the only way to have it work right (to check my edit) is to continue to let the sequence loop and it fixes itself?? In QT it says the clip is DV 720 * 480, 23.98 fps, and so ive checked that in FCP, the settings are the same, and ive played around extensively with the real time plyback settings and sequence settings, but nothing fixes it apart from letting it play til it loops!!!???
Has anyone had this??
Am i missing a setting here?? It seems to have been like this since the update to 10.5.3
Thanx!

Hi People, i have found the answer to my question and thought i might post the cause so anyone else who gets caught can get it sorted.
The answer ended up being that i had an aggregate device as my audio interface (because i have 2 audio interfaces) and so the audio was being delayed in being processed. So i deleted the device in my Audio MIDI Setup (audio page) and thhus, its all good. Quite painfull after a FC reinstall! Ha!!
Cheers

APE 12 exporting to MPEG only the audio is rendered not the video. Exports to other formats.

When exporting (rendering) a HD video through Adobe Premier Elements 12 to MPEG only the audio is rendered not the video. Exports to other formats.

I'm actually surprised that you can playback ProRes files in Windows Media Player, which normally exploits neither QuickTime components, nor reverse-engineered decoders from ffmpeg library... So as to be able to successfully import ProRes media into Adobe products you have to get QuickTime 7 installed (the latest version is 7.7.4). If your files are not corrupted and you didn't somehow install something like K-Lite codec pack on your machine, you should be good to go.

Turning off App Nap is not fixing my FCP rendering issue

I noticed that Mavericks was killing my rendering in FCP. I like to let it run overnight, and it was simply shutting off.
I did some research and learned about app nap, and how it was shutting down my rendering.
I went to finder, found FCP, and disabled app nap... but I'm STILL having problems with the rendering. It just stops! This is adding days and days to my production time, and I don't know how to fix it.
This is really really throwing a cramp in my work, and I'm really not please with apple for this one.

I switched MacBooks to complete my rendering... I will set up a new project tonight and let you know if adjusting these settings helped.
That said... I have to NEVER allow my computer to sleep, just so this rendering can take place? That's a little bit absurd.

.mov file will not open in FCP X?! codec unavailable? help!

I am trying to edit a short .mov file in FCP X. It was sent to me via YouSendIt. Once it has completed downloading, a message reads:
" The document “S-T3RRA Video Heads by FLOOD(1)-2.mov” could not be opened. A required codec isn't available. To see if additional software is available that will enable QuickTime Player to open the movie, click Tell Me More. "
When I click tell me more, Apple provides me with some additional media support for QuickTime, however I should not need this for a .mov file correct? The file will not open in FCP X or QT. Any ideas? Suggestions? Was this file incorrectly exported by the creator?
Help!!
Thank you!
Diego Lopez-Videla
Houston, TX

Yes, it will be encoded using a codec that's not on your system.
That is a common misunderstanding with .mov - it's not a format, it's a container.
It basically contains video & audio streams that may be mp4, mjpeg or just about anything.
In this case, the "anything" is what we need to find out, so we can work out what you need to read it.
You could try opening it using VideoSpec - it will tell you everything.

PE8 - No audio in rendered clip

I'm getting no audio after rendering, but do have sound before rendering. I've checked all the settings I know to check!
The PE8 audio hardware preference is set to 'Premiere Elements WDM Sound'. Is this a device that should show up in Device Manager? If so it isn't there. No problems with sound on any video except for PE8 rendered clips. I'd appreciate some help.
System:
Win7 Pro, 64-bit
ATI Radeon HD5850, Catalyst 10.2 driver
ASUS P6T motherboard
6 GB DDR3
Core i7 950 (stock clock)
BTW, PE8 bombs from time to time for no apparent reason. I gather from reading other posts that nobody else is having this problem? Ha! Also have Cyberlink PowerDirector but it rarely crashes. Sorry, had to get some gigs in.
Thanks,
Justin-H

As far as PowerDirector goes, I have an older version (think it is 10, but cannot recall clearly), and it has actually crashed more than my PrE 4. Now, in all fairness, I use it to handle some really odd CODEC files, and basically convert with it, for editing in PrPro. My observations do not reflect either the newer versions, do not compare with PrE 8, and also include some very difficult footage. Still, it goes down about 1:5 sessions, while PrE 4 has only "hung it up" twice, and at least one was OE on my part, while the other was definitely a resource issue, as I did not utilize my own tips in this ARTICLE.
Just some personal observations and not a controlled test,
Hunt

[SOLVED] Some text not rendering in Gnome after update

After a recent update some text is not rendering in Gnome. For example, look at the url bar of chromium in this screenshot: http://i.imgur.com/A2Qyw.png
Here's a "screenshot" of some text not rendering in gnome-terminal:
$ echo -e "I like pizza\nI like pizza\nI like pizza"
...blank line...
...blank line...
...blank line...
...blank line...
It basically renders my desktop environment worthless. I don't see anything suspicious in /var/lob/Xorg.0.log. Here are some of the packages I've updated recently:
[2012-05-10 23:05] Running 'pacman -Suy'
[2012-05-10 23:05] synchronizing package lists
[2012-05-10 23:05] starting full system upgrade
[2012-05-10 23:06] upgraded pygobject-devel (3.2.0-2 -> 3.2.1-1)
[2012-05-10 23:06] upgraded python2-gobject (3.2.0-2 -> 3.2.1-1)
[2012-05-12 10:49] Running 'pacman -Suy'
[2012-05-12 10:49] synchronizing package lists
[2012-05-12 10:49] starting full system upgrade
[2012-05-12 10:55] upgraded cairo (1.10.2-3 -> 1.12.2-1)
[2012-05-12 10:55] upgraded openssl (1.0.1.b-1 -> 1.0.1.c-1)
[2012-05-12 10:55] upgraded git (1.7.10.1-1 -> 1.7.10.2-1)
[2012-05-12 10:55] upgraded java-jline (1.0-1 -> 1.0-2)
[2012-05-12 10:55] upgraded kmod (8-1 -> 8-2)
[2012-05-12 10:55] upgraded libpulse (1.1-4 -> 2.0-1)
[2012-05-12 10:55] upgraded libusb-compat (0.1.3-2 -> 0.1.4-1)
[2012-05-12 10:55] upgraded libxi (1.6.0-1 -> 1.6.1-1)
[2012-05-12 10:55] upgraded man-pages (3.39-1 -> 3.40-1)
[2012-05-12 10:55] upgraded mpfr (3.1.0.p7-1 -> 3.1.0.p10-1)
[2012-05-12 10:55] installed webrtc-audio-processing (0.1-1)
[2012-05-12 10:55] upgraded pulseaudio (1.1-4 -> 2.0-1)
[2012-05-12 10:55] upgraded taglib (1.7.1-1 -> 1.7.2-1)
[2012-05-12 10:55] upgraded xorg-server-common (1.12.1-1 -> 1.12.1-2)
[2012-05-12 10:55] upgraded xorg-server (1.12.1-1 -> 1.12.1-2)
I'm not running [testing]. I don't know which of the two recent upgrades introduced the regression, but I'm guessing it was the one with all the xorg stuff...
Any ideas what's going on here? Thanks!
Last edited by mitch_feaster (2012-05-13 04:01:08)

Here's what I upgraded lately:
[2012-04-30 09:02] upgraded automake (1.11.5-1 -> 1.12-1)
[2012-04-30 09:02] upgraded libxfce4util (4.8.2-1 -> 4.10.0-1)
[2012-04-30 09:02] upgraded xfconf (4.8.1-1 -> 4.10.0-1)
[2012-04-30 09:02] upgraded libxfce4ui (4.8.1-1 -> 4.10.0-1)
[2012-04-30 09:02] upgraded exo (0.6.2-3 -> 0.8.0-1)
[2012-04-30 09:02] upgraded fuse (2.8.7-1 -> 2.9.0-1)
[2012-04-30 09:02] upgraded garcon (0.1.12-1 -> 0.2.0-1)
[2012-04-30 09:02] upgraded vim-runtime (7.3.495-2 -> 7.3.495-3)
[2012-04-30 09:02] upgraded gvim (7.3.495-2 -> 7.3.495-3)
[2012-04-30 09:02] upgraded libcanberra (0.28-2 -> 0.28-3)
[2012-04-30 09:02] upgraded libxfcegui4 (4.8.1-4 -> 4.10.0-1)
[2012-04-30 09:02] upgraded xfce4-panel (4.8.6-1 -> 4.10.0-1)
[2012-04-30 09:02] upgraded orage (4.8.3-1 -> 4.8.3-2)
[2012-04-30 09:02] upgraded terminal (0.4.8-1 -> 0.4.8-2)
[2012-04-30 09:02] upgraded thunar (1.2.3-5 -> 1.4.0-1)
[2012-04-30 09:02] upgraded thunar-media-tags-plugin (0.2.0-1 -> 0.2.0-2)
[2012-04-30 09:02] upgraded thunar-volman (0.6.1-1 -> 0.8.0-1)
[2012-04-30 09:03] upgraded ttf-dejavu (2.33-2 -> 2.33-3)
[2012-04-30 09:03] upgraded upower (0.9.15-1 -> 0.9.15-3)
[2012-04-30 09:03] upgraded xfburn (0.4.3-5 -> 0.4.3-6)
[2012-04-30 09:03] upgraded xfce4-appfinder (4.8.0-2 -> 4.10.0-1)
[2012-04-30 09:03] upgraded xfce4-session (4.8.3-1 -> 4.10.0-3)
[2012-04-30 09:03] upgraded xfce4-battery-plugin (1.0.1-1 -> 1.0.1-2)
[2012-04-30 09:03] upgraded xfce4-clipman-plugin (1.2.3-1 -> 1.2.3-2)
[2012-04-30 09:03] upgraded xfce4-cpufreq-plugin (1.0.0-2 -> 1.0.0-3)
[2012-04-30 09:03] upgraded xfce4-cpugraph-plugin (1.0.1-3 -> 1.0.2-1)
[2012-04-30 09:03] upgraded xfce4-datetime-plugin (0.6.1-2 -> 0.6.1-3)
[2012-04-30 09:03] upgraded xfce4-dev-tools (4.9.1-1 -> 4.10.0-1)
[2012-04-30 09:03] upgraded xfce4-dict (0.6.0-2 -> 0.6.0-3)
[2012-04-30 09:03] upgraded xfce4-diskperf-plugin (2.5.1-1 -> 2.5.2-1)
[2012-04-30 09:03] upgraded xfce4-eyes-plugin (4.4.1-2 -> 4.4.1-3)
[2012-04-30 09:03] upgraded xfce4-fsguard-plugin (1.0.0-2 -> 1.0.0-3)
[2012-04-30 09:03] upgraded xfce4-genmon-plugin (3.3.1-1 -> 3.3.1-2)
[2012-04-30 09:03] upgraded xfce4-mailwatch-plugin (1.1.0-4 -> 1.1.0-5)
[2012-04-30 09:03] upgraded xfce4-mixer (4.8.0-2 -> 4.8.0-3)
[2012-04-30 09:03] upgraded xfce4-mount-plugin (0.6.3-1 -> 0.6.3-2)
[2012-04-30 09:03] upgraded xfce4-mpc-plugin (0.4.0-1 -> 0.4.0-2)
[2012-04-30 09:03] upgraded xfce4-netload-plugin (1.1.0-1 -> 1.1.0-2)
[2012-04-30 09:03] upgraded xfce4-notes-plugin (1.7.7-3 -> 1.7.7-4)
[2012-04-30 09:03] upgraded xfce4-notifyd (0.2.2-2 -> 0.2.2-3)
[2012-04-30 09:03] upgraded xfce4-power-manager (1.0.11-2 -> 1.2.0-1)
[2012-04-30 09:03] upgraded xfce4-quicklauncher-plugin (1.9.4-6 -> 1.9.4-7)
[2012-04-30 09:03] upgraded xfce4-screenshooter (1.8.0-2 -> 1.8.0-3)
[2012-04-30 09:03] upgraded xfce4-sensors-plugin (1.2.3-4 -> 1.2.3-5)
[2012-04-30 09:03] upgraded xfce4-settings (4.8.3-2 -> 4.10.0-1)
[2012-04-30 09:03] upgraded xfce4-smartbookmark-plugin (0.4.4-1 -> 0.4.4-2)
[2012-04-30 09:03] upgraded xfce4-systemload-plugin (1.1.0-1 -> 1.1.0-2)
[2012-04-30 09:03] upgraded xfce4-timer-plugin (0.6.4-1 -> 0.6.4-2)
[2012-04-30 09:03] upgraded xfce4-verve-plugin (1.0.0-2 -> 1.0.0-3)
[2012-04-30 09:03] upgraded xfce4-wavelan-plugin (0.5.10-2 -> 0.5.10-3)
[2012-04-30 09:03] upgraded xfce4-weather-plugin (0.7.4-2 -> 0.7.4-3)
[2012-04-30 09:03] upgraded xfce4-xkb-plugin (0.5.4.3-1 -> 0.5.4.3-2)
[2012-04-30 09:03] upgraded xfdesktop (4.8.3-2 -> 4.10.0-1)
[2012-04-30 09:03] upgraded xfwm4 (4.8.3-1 -> 4.10.0-1)
[2012-04-30 09:03] upgraded xfwm4-themes (4.6.0-2 -> 4.10.0-1)
[2012-04-30 13:59] upgraded inetutils (1.9.1-1 -> 1.9.1-2)
[2012-04-30 13:59] upgraded libical (0.46-2 -> 0.48-1)
[2012-04-30 13:59] upgraded libusb (1.0.8-2 -> 1.0.9-1)
[2012-04-30 14:00] upgraded linux (3.3.3-1 -> 3.3.4-1)
[2012-04-30 14:00] upgraded mdadm (3.2.3-1 -> 3.2.3-2)
[2012-04-30 14:00] upgraded openssh (6.0p1-1 -> 6.0p1-2)
[2012-04-30 14:00] upgraded xfce4-artwork (0.1-7 -> 0.1.1a_git20110420-1)
[2012-04-30 14:00] upgraded xfce4-power-manager (1.2.0-1 -> 1.2.0-2)
[2012-05-01 10:42] upgraded chromium (18.0.1025.162-1 -> 18.0.1025.168-1)
[2012-05-01 10:42] upgraded imagemagick (6.7.6.5-1 -> 6.7.6.8-1)
[2012-05-01 10:42] upgraded libldap (2.4.30-1 -> 2.4.31-1)
[2012-05-01 10:42] upgraded upower (0.9.15-3 -> 0.9.16-1)
[2012-05-01 10:42] upgraded xfce4-battery-plugin (1.0.1-2 -> 1.0.2-1)
[2012-05-01 10:42] upgraded xfdesktop (4.10.0-1 -> 4.10.0-2)
[2012-05-02 20:01] upgraded bzip2 (1.0.6-3 -> 1.0.6-4)
[2012-05-02 20:01] upgraded dconf (0.12.0-1 -> 0.12.1-1)
[2012-05-02 20:01] upgraded e2fsprogs (1.42.2-1 -> 1.42.2-2)
[2012-05-02 20:01] upgraded syslog-ng (3.3.4-5 -> 3.3.5-1)
[2012-05-03 07:24] upgraded binutils (2.22-6 -> 2.22-7)
[2012-05-03 07:24] upgraded linux (3.3.4-1 -> 3.3.4-2)
[2012-05-03 07:24] upgraded xfce4-screenshooter (1.8.0-3 -> 1.8.1-1)
[2012-05-03 07:24] upgraded xfce4-settings (4.10.0-1 -> 4.10.0-2)
[2012-05-03 07:24] upgraded xfdesktop (4.10.0-2 -> 4.10.0-3)
[2012-05-03 18:21] upgraded libcanberra (0.28-3 -> 0.28-4)
[2012-05-03 18:21] upgraded mercurial (2.1.2-1 -> 2.2-1)
[2012-05-04 05:51] upgraded babl (0.1.6-1 -> 0.1.10-1)
[2012-05-04 05:51] upgraded gtk3 (3.4.1-1 -> 3.4.2-2)
[2012-05-04 05:52] upgraded ttf-freefont (20100919-2 -> 20120503-1)
[2012-05-04 20:58] upgraded nss (3.13.4-1 -> 3.13.4-2)
[2012-05-04 20:58] upgraded flashplugin (11.2.202.233-1 -> 11.2.202.235-1)
[2012-05-04 20:58] upgraded xfce4-artwork (0.1.1a_git20110420-1 -> 0.1.1a_git20110420-2)
[2012-05-05 10:57] upgraded attr (2.4.46-1 -> 2.4.46-2)
[2012-05-05 10:57] upgraded acl (2.2.51-1 -> 2.2.51-2)
[2012-05-05 10:57] upgraded zlib (1.2.6-1 -> 1.2.7-1)
[2012-05-05 10:57] upgraded consolekit (0.4.6-2 -> 0.4.6-3)
[2012-05-05 10:57] upgraded udev (182-1 -> 182-2)
[2012-05-05 10:57] upgraded device-mapper (2.02.95-2 -> 2.02.95-4)
[2012-05-05 10:57] upgraded filesystem (2012.2-4 -> 2012.2-5)
[2012-05-05 10:57] upgraded gegl (0.1.8-2 -> 0.2.0-1)
[2012-05-05 10:57] upgraded gimp (2.6.12-1 -> 2.8.0-1)
[2012-05-05 10:57] upgraded gnome-keyring (3.4.1-1 -> 3.4.1-2)
[2012-05-05 10:57] upgraded initscripts (2012.03.2-1 -> 2012.04.1-1)
[2012-05-05 10:57] upgraded libcap (2.22-2 -> 2.22-3)
[2012-05-05 10:57] upgraded libjpeg-turbo (1.2.0-1 -> 1.2.0-2)
[2012-05-05 10:57] upgraded libwbclient (3.6.4-2 -> 3.6.5-1)
[2012-05-05 10:57] upgraded linux-firmware (20120227-1 -> 20120227-2)
[2012-05-05 10:57] upgraded lvm2 (2.02.95-2 -> 2.02.95-4)
[2012-05-05 10:57] upgraded mdadm (3.2.3-2 -> 3.2.3-3)
[2012-05-05 10:57] upgraded mercurial (2.2-1 -> 2.2.1-1)
[2012-05-05 10:57] upgraded mkinitcpio (0.8.7-2 -> 0.8.8-1)
[2012-05-05 10:57] upgraded pam (1.1.5-2 -> 1.1.5-3)
[2012-05-05 10:57] upgraded smbclient (3.6.4-2 -> 3.6.5-1)
[2012-05-05 10:57] upgraded sysfsutils (2.1.0-7 -> 2.1.0-8)
[2012-05-05 10:57] upgraded usbmuxd (1.0.7-2 -> 1.0.7-3)
[2012-05-05 10:57] upgraded v4l-utils (0.8.6-1 -> 0.8.8-1)
[2012-05-05 10:57] upgraded xfsprogs (3.1.8-1 -> 3.1.8-2)
[2012-05-06 10:05] upgraded initscripts (2012.04.1-1 -> 2012.05.1-1)
[2012-05-06 10:05] upgraded unrar (4.1.4-2 -> 4.2.1-1)
[2012-05-06 19:49] upgraded bash (4.2.024-2 -> 4.2.028-1)
[2012-05-07 07:37] upgraded pygobject2-devel (2.28.6-5 -> 2.28.6-6)
[2012-05-07 07:37] upgraded python2-gobject2 (2.28.6-5 -> 2.28.6-6)
[2012-05-07 07:38] upgraded texlive-bin (2011.3-5 -> 2011.3-6)
[2012-05-08 07:36] upgraded libpurple (2.10.3-2 -> 2.10.4-1)
[2012-05-08 07:36] upgraded pidgin (2.10.3-2 -> 2.10.4-1)
[2012-05-08 19:03] upgraded cifs-utils (5.3-2 -> 5.4-1)
[2012-05-08 19:04] upgraded libmysqlclient (5.5.23-1 -> 5.5.24-1)
[2012-05-08 19:04] upgraded ntfs-3g (2012.1.15-2 -> 2012.1.15-3)
[2012-05-08 21:05] upgraded me-tv (1:1.3.6-1 -> 1:1.4.0.9-1)
[2012-05-09 06:36] upgraded gcc-libs (4.7.0-5 -> 4.7.0-6)
[2012-05-09 06:36] upgraded gcc (4.7.0-5 -> 4.7.0-6)
[2012-05-09 06:36] upgraded gmp (5.0.4-1 -> 5.0.5-1)
[2012-05-09 06:36] upgraded isl (0.09-1 -> 0.09-2)
[2012-05-09 20:05] upgraded chromium (18.0.1025.168-1 -> 18.0.1025.168-2)
[2012-05-09 20:05] upgraded glib2 (2.32.1-3 -> 2.32.2-2)
[2012-05-09 20:05] upgraded linux (3.3.4-2 -> 3.3.5-1)
[2012-05-09 20:05] upgraded qtcreator (2.4.1-1 -> 2.5.0-1)
[2012-05-10 06:28] upgraded libcups (1.5.2-1 -> 1.5.2-2)
[2012-05-10 06:28] upgraded cups (1.5.2-1 -> 1.5.2-2)
[2012-05-10 06:28] upgraded ffmpeg (20120317-1 -> 20120509-1)
[2012-05-12 09:12] upgraded libpulse (1.1-4 -> 2.0-1)
[2012-05-12 09:12] upgraded libusb-compat (0.1.3-2 -> 0.1.4-1)
[2012-05-12 09:12] upgraded mpfr (3.1.0.p7-1 -> 3.1.0.p10-1)
[2012-05-12 09:12] upgraded openssl (1.0.1.b-1 -> 1.0.1.c-1)
[2012-05-12 17:02] upgraded cairo (1.10.2-3 -> 1.12.2-1)
[2012-05-12 17:02] upgraded kmod (8-1 -> 8-2)
[2012-05-12 17:02] upgraded man-pages (3.39-1 -> 3.40-1)
[2012-05-12 17:02] upgraded taglib (1.7.1-1 -> 1.7.2-1)
[2012-05-12 17:02] upgraded xorg-server-common (1.12.1-1 -> 1.12.1-2)
[2012-05-12 17:02] upgraded xorg-server (1.12.1-1 -> 1.12.1-2)
[2012-05-12 20:52] upgraded libxi (1.6.0-1 -> 1.6.1-1)
[2012-05-12 20:52] upgraded xfce4-genmon-plugin (3.3.1-2 -> 3.4.0-1)
[2012-05-12 22:28] upgraded libvpx (1.0.0-1 -> 1.1.0-1)
[2012-05-13 08:33] upgraded gtk3 (3.4.2-2 -> 3.4.3-1)
[2012-05-13 08:37] upgraded libxi (1.6.1-1 -> 1.6.0-1)
[2012-05-13 08:40] upgraded libxi (1.6.0-1 -> 1.6.1-1)
[2012-05-13 09:40] upgraded cairo (1.12.2-1 -> 1.10.2-3)
I suspected libxi first but a downgrade did not resolve the problem. So you may very well be correct by connecting this to the xserver. I'm using nouveau by the way.

Audio not rendering in FCP 5.0.1

Similar Messages

Maybe you are looking for