Audio not stored in audio track

I am a new user of Premiere Pro CS3 and did just a few projects. So far I did not have problems storing my comments to a sequence in the specified audio track. But with this project I did not succeed. The function works still works fine for other - new or old - projects but not for this one.
I think I have the same settings. My equipment works fine. But my comments are not stored in the audio track. I think that must be a problem of a setting. but which one. Of course I activated the track for the storing of audio. But nothing happens.
Any ideas? Thanks for any hints.

Be sure you're using the correct
type of
audio track.
Cheers
Eddie
Forum FAQ
Premiere Pro Wiki
- Over 250 frequently answered questions
- Over 100 free tutorials
- Maintained by editors like
you

Similar Messages

  • Are audio tracks in LP8 stored in RAM?

    Are audio tracks in LP8 stored in RAM?
    I'm just trying to work out whether it's worth upgrading the RAM on my Powermac G5 Dual 2.3 from 4gb to 6gb.

    *When using Samplers like Kontakt in DFD mode sample headers (just the attacks of samples) are being loaded into physical RAM
    *Using Kontakt in Sampler mode will load all Samples into RAM
    *Processing Plug Ins like Reverbs delay etc. work with the available RAM
    So yes upgrading to 6 Gigs will do you some good - note that there is a limit for 32-Bit applications which is around 2,7 Gigs for physical RAM and 3,7 Gigs for virtual RAM. You can check this by monitoring your RAM in the activity monitor.

  • I've been using Ringtone Maker to add ringtones to my iPhone. The app is now telling me my music I bought from the iTunes store is not exportable. I downloaded a new app called Ringer and it says my song "has no audio tracks". What am I doing wrong?

    I've been using Ringtone Maker to add ringtones to my iPhone. The app is now telling me my music I bought from the iTunes store is not exportable. I downloaded a new app called Ringer and it says my song "has no audio tracks". Wha am I doing wrong??

    never mind.  i think it just makes you review the information -- it looks like you have to click through everything.

  • When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

    Hi Brian,
    Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
    Thanks for your help though!
    Pernille

  • How do i get itunes to play in 5.1 on windows, 5.1 works on everything else on my comp, blueray,dvd,games... just not itunes. even though the things i am trying to play have a 5.1 audio track.

    on the files that have multiple audio tracks the option to switch pops up but i am unable to select it.
    i've tried talking to an apple tech at an apple store, independent tech at mac dealer, i have spent countless hours surfing forums, and even managed to talk to some condicending jerk at an apple customer service number"just because you spent a lot of money converting you're media to itunes doesn't mean you get support" i was told "  aslo while in itunes looking at where the option to go 5.1 is i was told" there is nowhere in itunes to set that setting" i'll mention again i had itunes in fullscreen and was looking at the damm option while he said that.
    feeling really ripped off here bought system for media and would have been better off buying dvds
    spent about 3 hours last night surfing forums, took a few hours to find a number at apple where i could talk to a real person just to be brushed off.

    i just tried disabling adblock and checking if i had any no script or noscript sort of addon. i do not have a script killer. disabling adblock did not solve the issue.

  • Audio Tracks will not play

    Hi there,
    I'm using FCP 7 for a project that was originally edited in Final Cut 6 (I had to switch to 7 because BOTH my computers at home have crashed today which use FCP6, now I'm up at my office and have to use 7 - bad day, I know).
    I'm trying to do some sound edits and only one audio track is playing (tracks 3 and 4) which are the source audio from the XDCAM Footage (note, these tracks have not been soloed - if that's a word). All my other tracks are not working. When played they produce no sound, but the audio meters to the right are moving. When played in quicktime, iTunes, or Finder they do indeed still work.
    Audio Output has been set to Default, though I've also tried Built-in Audio Output. I'm using headphones, but it also does not play through the computer. I've also tried speakers. All other audio on the computer is fine - my volume is up.
    Sometimes I can get tracks one and two to play after re-rendering.
    RT is set to Unlimited, but it also doesn't work with Safe RT.
    Any insight into this issue would be much appreciated!
    Thanks

    Go to Sequence Settings...then the AUDIO TAB. How many tracks of audio do you have? More than 2 and STEREO?
    If you right-click on the track patch area on the timeline, you can assign these tracks to audio ouputs...are they set to anything other than 1 or 2?
    Shane

  • Audio tracks not playing

    A really odd thing keeps happening to me.
    When I open my Logic projects it often doesn't play all the audio tracks. If I double-click a region and open it in sample editor I can play it from there but still it doesn't play the track in arrange. And the weird thing is it's not always the same track.
    Has this happened to anyone else? It doesn't even bounce the tracks offline, the tracks are absolutely mute.

    do they play when moved to another track?
    are they light gray in color? select track or segment and hit the m key.
    are they assigned to a bus?

  • Audio Tracks can be Heard but not Seen

    I am using Logic Studio 9 and in Logic Pro all the sudden I have had a problem with my audio tracks. When I record the tracks I can see the track audio waves being cut but once I hit stop the track visual go to a straight line with no feature. If I back up the play head and press play I can hear the audio of the track, but not see it. I can even bounce the track and use it in iTunes or WaveBurner, but still I cannot see the track visual info. This just recently started. ANY ANSWERS to this mystery would be greatly appreciated.
    Thanks

    http://discussions.apple.com/thread.jspa?threadID=2371889&tstart=0

  • Audio Tracks do not have sound?

    I opened one of my Garageband projects in Logic and found out that none of my audio tracks have sound when played. The software instruments work just fine, and nothing is soloed or muted. Pretty sure audio is routed to the right output as well. What am I missing? I am new to Logic so I don't have it quite figured out yet.

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Audio Tracks Not Sounding

    Hello,
    I have several clips (and audio tracks) in a sequence that won't play audio all the sudden. I have no idea why. The problem audio tracks are darkened, and play fine outside the sequence. I'm working in FCP v. 6.0.1.
    Does anyone know what could be causing this? I can't find anything in the manuals -- any help would be greatly appreciated.
    Thanks,
    Therese

    Hi Therese,
    Make sure your audio tracks are not muted. On the left of the tracks there are green buttons for muting, toggling them will mute/unmute your audio.
    Also, if you have an icon of a tiny pair of headphones to the left of these buttons make sure these are not enabled (showing orange).
    DM
    Message was edited by: David Mclaine

  • Audio tracks not lined up and no sound

    For some reason my audio tracks for my clips are on different tracks. Most are on a5/a6 and a3/a4 - those play with sound. The audio on a1/a2 is not heard when I play the clip??? When I try to move the audio to different tracks it messes up my video.
    What I want to do is either figure out how to get the audio on a1/a2 to be heard OR move the audio to tracks that I know work without moving the video.
    Can anyone help?

    No mute. Maybe the tracks are off - but I don't think so? I have a screen capture -- although I cannot figure out how to add that to the post - can you do that???
    the only thing that is different is that the source for the ones that don't work A1/A2 havea source of a1/a2 that is connected. Even if I 'break apart' the a1 from the A1 and the a2 from the A2 still no sound...

  • Audio Tracks not showing in itunes.

    Dear All
    After transferring audio tracks to itunes library I am manually dragging them to my ipod shuffle and the songs are shown in the shuffle but when I am deleting the tracks from the itunes library then nothing is shown in the ipod shuffle folder of itunes but the settings tab shows the amount of space used and the songs are present in the ipod as I can play them. I am not able to manage or change the sequence of song in shuffle since it is not shown in the device folder of itunes.How will I be able to see the list of songs presently transferred in my ipod shuffle if I delete them from the itunes library ?
    Help please.
    Thank you.

    Deba007 wrote:
    Actually I dont keep my audio tracks in my Hard Drive but its in DVDs and CDs. Therefore I import them into the itunes library and transfer them to shuffle manually and then delete them from the itunes library.
    When I am deleting them from my itunes library I cannot see them in the shuffle folder though I can play all the songs in ipod shuffle.This problem does not happen in my Ipod classic 160GB.
    Help Please.
    Shuffle works differently from the "Ipod classic 160GB". There is NO additional help for this issue.
    Message was edited by: 0Ari0

  • Logic Pro X keeps sending C0 notes to midi out when record is armed on a audio track

    I have a annoying problem with Logic Pro X, which I bought a month ago. Here's al little scenario that describes the problem.
    I disconnect my audio interface, so that Logic Pro has to rely on my MacBook Pro's internal audio. This way I exclude my RME-FF800 from being of any influence.
    I start up the Midi Monitor tool, to analyse what comes out of Logic; MIDI-wise.
    I start up Logic set up a small test project in Logic Pro X, that contains:1 audio track
    There's little button on the audio track with a red-colored "R". This is the button to "arm" this track for recording audio.
    I push the little "R" button, the R-character turns white, the button as a whole turns red. The button starts blinking.
    From this moment on Logic starts sending MIDI messages ....... huh?  Every second or so ... a low C.
    In my regular studio setup this means that I hear a low repeated note coming out of my piano, every time I record audio.  How annoying!!
    By the way ... a Guitar/Bass track has the same problem. All the other track types (External midi, software instrument, drummer) don't have this problem.
    Help is deeply appreciated, because it drives me crazy and if I can't fix this .... I think I have to return to my previous DAW-of-choice (Cubase 7.5).
    Here's the Midi Monitor output.
    20:46:01.241          To MIDI Monitor (midi monitor)          Note On          2          C0          127
    20:46:02.008          To MIDI Monitor (midi monitor)          Note Off          2          C0          0
    20:46:02.774          To MIDI Monitor (midi monitor)          Note On          2          C0          127
    20:46:03.541          To MIDI Monitor (midi monitor)          Note Off          2          C0          0
    20:46:04.308          To MIDI Monitor (midi monitor)          Note On          2          C0          127
    20:46:05.075          To MIDI Monitor (midi monitor)          Note Off          2          C0          0
    20:46:05.841          To MIDI Monitor (midi monitor)          Note On          2          C0          127
    20:46:06.608          To MIDI Monitor (midi monitor)          Note Off          2          C0          0
    20:46:07.374          To MIDI Monitor (midi monitor)          Note On          2          C0          127
    20:46:08.140          To MIDI Monitor (midi monitor)          Note Off          2          C0          0
    20:46:08.908          To MIDI Monitor (midi monitor)          Note On          2          C0          127
    20:46:09.675          To MIDI Monitor (midi monitor)          Note Off          2          C0          0
    20:46:10.441          To MIDI Monitor (midi monitor)          Note On          2          C0          127
    20:46:11.208          To MIDI Monitor (midi monitor)          Note Off          2          C0          0
    20:46:11.975          To MIDI Monitor (midi monitor)          Note On          2          C0          127
    20:46:12.741          To MIDI Monitor (midi monitor)          Note Off          2          C0          0
    20:46:13.507          To MIDI Monitor (midi monitor)          Note On          2          C0          127
    20:46:14.274          To MIDI Monitor (midi monitor)          Note Off          2          C0          0
    20:46:15.043          To MIDI Monitor (midi monitor)          Note On          2          C0          127
    20:46:15.808          To MIDI Monitor (midi monitor)          Note Off          2          C0          0
    20:46:16.574          To MIDI Monitor (midi monitor)          Note On          2          C0          127
    20:46:17.341          To MIDI Monitor (midi monitor)          Note Off          2          C0          0
    Logic Pro X = version 10.0.6
    Mac Book Pro = late 2008.
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro5,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2,53 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache:          6 MB
      Memory:          4 GB
      Bus Speed:          1,07 GHz
      Boot ROM Version:          MBP51.007E.B06
      SMC Version (system):          1.33f8
    Mac OSX = 10.9.1
      System Version:          OS X 10.9.1 (13B42)
      Kernel Version:          Darwin 13.0.0
      Boot Volume:          Macintosh HD
      Boot Mode:          Normal
      Secure Virtual Memory:          Enabled

    The note is likely being sent out because of a Control Surface you have installed or used.... be it a hardware keyboard, controller or even an ipad controller app... such as Logic Remote or TouchOSC for example... or even an iOS software synth app that is sending midi over wireless....
    So.. first make sure you have force quit any iPad/iPhone Logic/midi related apps and not just closed them..
    Then if that doesn't fix things.. delete Logic's CS preferences... and Logic's own user preferences too...as described here..
    Delete the user preferences
    You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
    In the Finder, choose Go to Folder from the Go menu.
    Type ~/Library/Preferences in the "Go to the folder" field.
    Press the Go button.
    Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
    If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
    Restart the computer.
    Do not forget to Quit Logic before doing this and then restart the Mac after doing this....

  • Additional audio tracks not showing up in my movie library. Thoughts?

    I have movies in both .mp4 and .m4v format with multiple audio tracks (all AAC 96kbps; 48kHz - video is .h264). When imported into iTunes, I cannot choose the alternate video tracks. However, i know that they work, because I check them in both VLC and Plex and everything is as it should be. I have made sure that the formats meets the specs of both iTunes and the AppleTV 3rd generation (which displays the same issue).
    I have accomplished this in iTunes a few weeks ago successfully so I am not sure what I am doing wrong this time. My goal is to build a collection with available audio commentaries. I am starting to Winder if iTunes holds a limit on audio track in a video. For instance - The Matrix has an addition 4 audio commentary tracks.
    I remuxed all of these myself and have a history in digital video production. If anyone has any suggestions for something simple (or not) that I may be overlooking I would greatly appreciate your input.
    Thank you!

    Hi drak0772,
    If you are having issues using Disney Movies Anywhere through iTunes, you may find the following article helpful:
    Apple Support: About Disney Movies Anywhere and iTunes Store
    http://support.apple.com/kb/HT6129
    Regards,
    - Brenden

  • Just got fcp, how do mute the sound on the video clip so it does not come through the audio track?

    just got fcp, how do mute the sound on the video clip so it does not come through the audio track?
    Please help

    Don't edit the audio into the timeline. Or pull the audio level down to zero in the inspector or on the audio waveform in the timeline.

Maybe you are looking for

  • UoM field in A/P Credit Memo

    Hello Gurus, I'm currently using SP01 PL04.  Programmatically saved a A/P Credit Memo in draft with Base Unit=tYes, the quantity is fine but the UOM is still the purchase UoM.  Please Help...

  • How do I make space on my MBP and transfer old files to External Hard Drive?

    I recently ran out of the 250 GB space on my 2010 Macbook Pro, so I bought a non-apple external hard drive. I plugged it in and Time Machine automatically popped up. I just wanted to know what the correct way to transfer all my old files that I'm not

  • Adobe PDF Document error pop ups while web surfing

    I have a strange issue with either Adobe Reader or Adobe Acrobat. Randomly while looking at websites or loading a website an Adobe error pops up that says, "The Adobe Acrobat/Reader that is running can not be used to view PDF files in a Web Browser.

  • XP and Acrobat 7.0

    We recently upgraded 3 pcs to XP sp2. They all had Acrobat 7.0 on them. one was professional, 2 were standard. Each one of them has the c:\program files\common files\adobe\color\ folder missing. This folder just doesn't exist, so there are no icc pro

  • How do you get the Genius Sidebar back on iTunes 11

    How do you get the Genius Sidebar back on iTunes 11.  How is clicking on a arrow that sometimes you miss and it wants to rename the file an improvement.  then I have to click 3 times deep to get to the hidden genius recommendations? Again explain to