Audio not sync with video using photo booth since os moutain lion was installed

Since OS Moutain Lion was installed my photo booth no longer function well, audio is not sync with video, the sound delay is obvious with the video outut wha can I do to correct this?

I've seen that problem in several threads, both here and in the Mountain Lion forum. I tried to replicate the problem but was unable to do so... so it's not a problem effecting all Macs. Try posting here - in the Mountain Lion forum - and see what you get as a search. There's one specific "More Like This" to the right on this thread but there doesn't seem to have been a solution posted.
Good luck,
Clinton

Similar Messages

Audio not synced with video on movie downloads

The audio is not synced with video on movie downloads from the ITunes store. I have downloaded many movies in the past from the same PC with no problem.

Hi Jimmyjoefl,
I understand that you are having playback issues with videos you have purchased from the iTunes Store. After doing some research, I found the following resource that describes your exact symptoms:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Here are some things to check if, when viewing a movie in iTunes for Windows Vista or Windows 7, you notice that a video appears distorted, intermittently pauses, or has audio that is out of sync with the image on-screen.
Thanks,
Matt M.

My audio isn't in sync with video on photo booth

Ever since I installed Mountain Lion on my 2012 MBP (No retina display), I haven't been able to have my audio and video synced on Photo Booth. Any suggestions on how I can tweak it or fix it? Thanks a bunch.

Ok, I've discovered that it's not Captivate that is causing the mismatch in audio/video. The fault lies with the Adobe Media Encoder.
I tried bringing in the .Mov's into another convertor and they worked perfectly.Basically, I really like the AME when it's working properly, as it has a very good range of custom options. I guess that I'll need to take it up with Adobe Support and hope they can sort it out.
Has anyone else experienced any problems with AME?

Audio not sync with Video

I am using a Sony DVMC-DA1 to convert VHS tapes into Final Cut Express. After I finish capturing is says,
"The audio sample rate of one or more of your captured media files does not match the sample rate on your source tape. This may cause the video and audio of these media files to be out of sync. Make sure the audio sample rate of your capture preset matches the sample rate of your tape."
I have looked in books and feel that I have tried everything. The audio is still not in sync with the video. I am out of ideas. Does anyone know how to fix this?

What is the audio settings of your sequence? It has to match that of the video you're importing
I'm not familiar with the unit you're using to import but basically, if your video is 16 Bit 48K then your sequence, your timeline, as to be the same, say NTSC (or PAL) DV. If the video is being captured at 12 Bit, your sequence should be NTSC (or PAL) 32K.
Having mismatched audio rates in your timeline will usually lead to out of sync audio

Audio Not Syncing with video

When I go to test my video the audio and video are playing at different playback speeds. I'm trying to
create a video using Flash that requires events based on the song itself. Any idea how to make the audio and video play at the
same speed during Timeline playback and testing?

Syncing sound with animation in Flash is not an easy thing to do. First, understand that there are three ways of playing sound in your movie:
Placing sound directly in the timeline
Placing sound in the library and accessing it via ActionScript
Placing a sound file on the hard drive (locally or on a web server) and accessing it via ActionScript
Sound that's in the timeline can be synced precisely, but you can't use a sound clip that's very long. It's meant for beeps and such, not for an entire song. But if you use sound like this, set it to Stream for best results.
Sound in the library has a chance of syncing if you load it as a SoundChannel. Remember to import flash.media.SoundChannel at the beginning of your ActionScript.
AFAIK, there is no reliable way of syncing an external sound file.

Audio not syncing with Video when live streaming.

Hello, i was wondering if i could get a possible fix for a problem that's been keeping my streaming back. I am using a Dazzle capture card to stream video games, and Flash Media Live Encoder 3.2 to send out the feed. My video source is of course the capture card and i use a MAC program called "Audio Midi Setup" to create an aggregate device of both the dazzle audio and my microphone as an audio source for FMLE. This way, the viewers could hear both my voice and the game audio.
Everything works really well, except for one problem. The audio always occurs 6 seconds before the actions in the game that correspond to it, and my voice will mention something first before it happens, again off by 6 seconds. I've played around with a couple of the settings for audio and video, but no matter what, it's always a 6 second delay. I've had this problem for a while and am unsure if the problem stems to FMLE at this point, but would appreciate any possible help. Thank you

This is common for separately recorded audio. Sync the start of both clips. then go to the end and adjust the speed of the audio clip until it get's back in sync at the end. It should then be in sync throughout. You'll have to experiment to get just the right adjustment. My device's clips had to be adjusted to 100.4% speed to keep sync.

Audio not syncing with video in itunes

Just upgraded iTunes (to sync wiht my iphone 5C) -- after a few playbacks the audio stopped playing while video would continue (no issues with music or in any other video playback outside of itunes). I turned off the equalizer, which returned the audio track to syncing with the video, except when i expand to full screen viewing -- the audio gets off track again and never catches up. In looking through user comments this seems a frequent problem for iTunes with Windows, but I have OS X 10.8.3.

Just upgraded iTunes (to sync wiht my iphone 5C) -- after a few playbacks the audio stopped playing while video would continue (no issues with music or in any other video playback outside of itunes). I turned off the equalizer, which returned the audio track to syncing with the video, except when i expand to full screen viewing -- the audio gets off track again and never catches up. In looking through user comments this seems a frequent problem for iTunes with Windows, but I have OS X 10.8.3.

Audio not synced with video

I imported from avchd (Panasonic Lumix) format and the video was all speeded up and the audio was not in sync. I have imovie 08, 7.1.4. It seems I should be able to use it. Your feedback is appreciated.

I have seen this article around but there hasn't been a correct answer. I have the waterproof Panasonic Lumix TS2 and I upgraded to iLife 09 because the guy on the phone said that's the only way I could retrieve my videos. Then after doing so, my videos play way too fast and the audio seems normal. In the other forum topics like this they all say that you need to upgrade to iMovie 09, same with Apples response to the Lumix cameras, but I have it and it still doesn't work or fix the problem.
Love this camera, love my mac, but now I am hating both haha.

Digital recorder audio not syncing with video footage

Am I missing the obvious and easy method? When we shoot weddings, we always use a separate digital audio recorder and lav in the groom's pocket as a backup device. When it comes time to use that audio, it always goes askew compared to the video's audio. My guess is this happens because the video is only recording 29.97 frames per second and not a full 30, whereas the digital recorder provides a real-time recording. So, I end up having to shorten the audio every 10 seconds or so (by cutting out a few frames worth of audio) to keep everything synced. Is there a way to convert the audio from the pocket recorder to a video format so it will stay in sync without the need for editing it? Thanks!

I tried the resampling and even though original file was 44.1khz and I did convert it to 48khz, after a few minutes go by the file still goes seriously out of sync. It's a 34 minute audio clip, and by the end of the clip, its about 3-4 seconds out of sync. Any other thoughts? Thanks!

PVC2300 recorded audio is not sync with video

Hi all,
I have a big big problem with my new PVC2300 network camera:
when I recording (from browser interface) the audio of the .avi file is not sync with video... in details in a record of 12-13 minutes the audio ends 8-10 seconds before the video... and I suppose that more lenght is the recorded file and more lenght is the desync between audio and video.
I use MPEG4 video stream at 640x480 30 fps and audio G.711 A-Law in mode "simplex - listen only".
For my usage this is a very big isssue... I hope there is a way to fix it.
Thanks in advice
Robert

I tried for 2 days for all possible configurations, editing: frame rate, quality, resolution. and type of stream (MPEG4 or MJPEG).
The only case that the recorded audio and video is sync is setting the SMB protocol to autorecord to a NAS.
But this mode have a lot of problems (.asf format, large file size and continuos recording without the ability to start and stop the recordings).
I think that the desync is a bug (a very big bug) of yours activex control that makes the recording.
I have find more or less a workaround using the Cisco Client... the program get an error on start (after unintall and install few times, and a lot of test, I understand that the only way to use the Cisco Client is running it as administrator.
Ok finnaly the cisco program works, but using it I found another problems:
after recorded, I tried to export a part of recording for testing the audio-video sync... the program gives me 2 format: AVI (without the ability to choose any other options) and ASF (with quality options). I tried first AVI format... the result sucks: bad video quality, 1,8 GB every 20 minutes and audio desync... no comment! ...then I tried the second export format: ASF...thats OK, the result is good... audio finally is syncronized with video.
My system is Windows Vista SP2 (32bit) and Internet Explorer 8... I tried also from an other pc with Windows 7... same problems recording from browser interface. I have installed on my system the lastest video codecs (for example: divx etc.).
For my usage I can use the Cisco Client but my ideal usage will be recording from browser.
I think these problems are very serious for a product as is this camera.
I hope there is a way to resolve they... maybe with a future firmware update or installing an other software.
Thanks
Robert

HT4589 When using compressor voice is not sync with video. What causes this and how to fix it, please?

When using compressor voice is not sync with video. What causes this and how to fix it, please?

Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
Let us know how you get on.

Make a Video using Photo Booth?

I once made a video using photo booth and the built in isight camera. However, today I opened photo booth and cannot figure out how to switch it to video mode. It just takes pictures. I believe there use to be a switch on the interface to change it to video mode but I can't seem to find it anyway.
How do I do this? Did they update photo booth and remove that feature?
I want to use photo booth to shoot my quick online reviews and not imovie.

Hello Derek
dolbinau is right! You need Leopard to use Photo Booth 2.
If you want to keep Tiger and still record video with "effects", take a look at WebcamTweaker
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.1) External iSight
Message was edited by: EZ Jim

Monitoring audio in sync with video when capturing in FCP studio

Is there a way I can monitor audio in sync with video when capturing in FCP Studio? I know you can plug headphones into your tape deck but that sound is not in sync with the video in the capture window due to time delay. I tried plugging the headphones into my Powerbook but could not get any audio coming through these, nor audio through the Mac's inbuilt speakers.

The preview checkbox is ticked and the audio monitor indicates that sound is being picked up (the levels rise and fall) but I still can't hear anything! The audio/video sync on the external monitor is ok, but because there is a time delay between that and the video capture window, I can't use that as a reliable monitor for sound sync. If I could resolve the video sync problem there, then I could monitor the sound through the external monitor.

HT3964 Hello, my isight camer is not working properly, i was using photo booth and suddenly the image was black or too dark and also ichat and facetime are too dark as well, please helpme out i can not find any solution.

Hello, my isight camer is not working properly, i was using photo booth and suddenly the image was black or too dark and also ichat and facetime are too dark as well, please helpme out i can not find any solution.

read this and see if it helps: http://support.apple.com/kb/ht2090

I upgraded my software on my Dell Desktop and now my iPad and iPhone calendars are not syncing with my desktop calendar. I have uninstalled and re-installed my apple software. What am I missing?

I upgraded my software on my Dell Desktop and now my iPad and iPhone calendars are not syncing with my desktop calendar. I have uninstalled and re-installed my apple software. What am I missing?

I recommend reaching out to Citrix via their support system -
http://www.citrix.com/products/receiver/resources-and-support.html
The receiver app has a specific list of servers it's compatible with, if the server is not on the list the app won't work in OS X.
http://support.citrix.com/servlet/KbServlet/download/28492-102-671726/Receiver%2 0for%20Mac%2011%204%20FAQ%20v1_1235.pdf
Do you know what server you're connecting to?

Audio not sync with video using photo booth since os moutain lion was installed

Similar Messages

Maybe you are looking for