Audio not synced with video

I imported from avchd (Panasonic Lumix) format and the video was all speeded up and the audio was not in sync. I have imovie 08, 7.1.4. It seems I should be able to use it. Your feedback is appreciated.

I have seen this article around but there hasn't been a correct answer. I have the waterproof Panasonic Lumix TS2 and I upgraded to iLife 09 because the guy on the phone said that's the only way I could retrieve my videos. Then after doing so, my videos play way too fast and the audio seems normal. In the other forum topics like this they all say that you need to upgrade to iMovie 09, same with Apples response to the Lumix cameras, but I have it and it still doesn't work or fix the problem.
Love this camera, love my mac, but now I am hating both haha.

Similar Messages

Audio not sync with video using photo booth since os moutain lion was installed

Since OS Moutain Lion was installed my photo booth no longer function well, audio is not sync with video, the sound delay is obvious with the video outut wha can I do to correct this?

I've seen that problem in several threads, both here and in the Mountain Lion forum. I tried to replicate the problem but was unable to do so... so it's not a problem effecting all Macs. Try posting here - in the Mountain Lion forum - and see what you get as a search. There's one specific "More Like This" to the right on this thread but there doesn't seem to have been a solution posted.
Good luck,
Clinton

Audio not synced with video on movie downloads

The audio is not synced with video on movie downloads from the ITunes store. I have downloaded many movies in the past from the same PC with no problem.

Hi Jimmyjoefl,
I understand that you are having playback issues with videos you have purchased from the iTunes Store. After doing some research, I found the following resource that describes your exact symptoms:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Here are some things to check if, when viewing a movie in iTunes for Windows Vista or Windows 7, you notice that a video appears distorted, intermittently pauses, or has audio that is out of sync with the image on-screen.
Thanks,
Matt M.

Audio not sync with Video

I am using a Sony DVMC-DA1 to convert VHS tapes into Final Cut Express. After I finish capturing is says,
"The audio sample rate of one or more of your captured media files does not match the sample rate on your source tape. This may cause the video and audio of these media files to be out of sync. Make sure the audio sample rate of your capture preset matches the sample rate of your tape."
I have looked in books and feel that I have tried everything. The audio is still not in sync with the video. I am out of ideas. Does anyone know how to fix this?

What is the audio settings of your sequence? It has to match that of the video you're importing
I'm not familiar with the unit you're using to import but basically, if your video is 16 Bit 48K then your sequence, your timeline, as to be the same, say NTSC (or PAL) DV. If the video is being captured at 12 Bit, your sequence should be NTSC (or PAL) 32K.
Having mismatched audio rates in your timeline will usually lead to out of sync audio

Audio not syncing with Video when live streaming.

Hello, i was wondering if i could get a possible fix for a problem that's been keeping my streaming back. I am using a Dazzle capture card to stream video games, and Flash Media Live Encoder 3.2 to send out the feed. My video source is of course the capture card and i use a MAC program called "Audio Midi Setup" to create an aggregate device of both the dazzle audio and my microphone as an audio source for FMLE. This way, the viewers could hear both my voice and the game audio.
Everything works really well, except for one problem. The audio always occurs 6 seconds before the actions in the game that correspond to it, and my voice will mention something first before it happens, again off by 6 seconds. I've played around with a couple of the settings for audio and video, but no matter what, it's always a 6 second delay. I've had this problem for a while and am unsure if the problem stems to FMLE at this point, but would appreciate any possible help. Thank you

This is common for separately recorded audio. Sync the start of both clips. then go to the end and adjust the speed of the audio clip until it get's back in sync at the end. It should then be in sync throughout. You'll have to experiment to get just the right adjustment. My device's clips had to be adjusted to 100.4% speed to keep sync.

Audio not syncing with video in itunes

Just upgraded iTunes (to sync wiht my iphone 5C) -- after a few playbacks the audio stopped playing while video would continue (no issues with music or in any other video playback outside of itunes). I turned off the equalizer, which returned the audio track to syncing with the video, except when i expand to full screen viewing -- the audio gets off track again and never catches up. In looking through user comments this seems a frequent problem for iTunes with Windows, but I have OS X 10.8.3.

Just upgraded iTunes (to sync wiht my iphone 5C) -- after a few playbacks the audio stopped playing while video would continue (no issues with music or in any other video playback outside of itunes). I turned off the equalizer, which returned the audio track to syncing with the video, except when i expand to full screen viewing -- the audio gets off track again and never catches up. In looking through user comments this seems a frequent problem for iTunes with Windows, but I have OS X 10.8.3.

Audio Not Syncing with video

When I go to test my video the audio and video are playing at different playback speeds. I'm trying to
create a video using Flash that requires events based on the song itself. Any idea how to make the audio and video play at the
same speed during Timeline playback and testing?

Syncing sound with animation in Flash is not an easy thing to do. First, understand that there are three ways of playing sound in your movie:
Placing sound directly in the timeline
Placing sound in the library and accessing it via ActionScript
Placing a sound file on the hard drive (locally or on a web server) and accessing it via ActionScript
Sound that's in the timeline can be synced precisely, but you can't use a sound clip that's very long. It's meant for beeps and such, not for an entire song. But if you use sound like this, set it to Stream for best results.
Sound in the library has a chance of syncing if you load it as a SoundChannel. Remember to import flash.media.SoundChannel at the beginning of your ActionScript.
AFAIK, there is no reliable way of syncing an external sound file.

Digital recorder audio not syncing with video footage

Am I missing the obvious and easy method? When we shoot weddings, we always use a separate digital audio recorder and lav in the groom's pocket as a backup device. When it comes time to use that audio, it always goes askew compared to the video's audio. My guess is this happens because the video is only recording 29.97 frames per second and not a full 30, whereas the digital recorder provides a real-time recording. So, I end up having to shorten the audio every 10 seconds or so (by cutting out a few frames worth of audio) to keep everything synced. Is there a way to convert the audio from the pocket recorder to a video format so it will stay in sync without the need for editing it? Thanks!

I tried the resampling and even though original file was 44.1khz and I did convert it to 48khz, after a few minutes go by the file still goes seriously out of sync. It's a 34 minute audio clip, and by the end of the clip, its about 3-4 seconds out of sync. Any other thoughts? Thanks!

PVC2300 recorded audio is not sync with video

Hi all,
I have a big big problem with my new PVC2300 network camera:
when I recording (from browser interface) the audio of the .avi file is not sync with video... in details in a record of 12-13 minutes the audio ends 8-10 seconds before the video... and I suppose that more lenght is the recorded file and more lenght is the desync between audio and video.
I use MPEG4 video stream at 640x480 30 fps and audio G.711 A-Law in mode "simplex - listen only".
For my usage this is a very big isssue... I hope there is a way to fix it.
Thanks in advice
Robert

I tried for 2 days for all possible configurations, editing: frame rate, quality, resolution. and type of stream (MPEG4 or MJPEG).
The only case that the recorded audio and video is sync is setting the SMB protocol to autorecord to a NAS.
But this mode have a lot of problems (.asf format, large file size and continuos recording without the ability to start and stop the recordings).
I think that the desync is a bug (a very big bug) of yours activex control that makes the recording.
I have find more or less a workaround using the Cisco Client... the program get an error on start (after unintall and install few times, and a lot of test, I understand that the only way to use the Cisco Client is running it as administrator.
Ok finnaly the cisco program works, but using it I found another problems:
after recorded, I tried to export a part of recording for testing the audio-video sync... the program gives me 2 format: AVI (without the ability to choose any other options) and ASF (with quality options). I tried first AVI format... the result sucks: bad video quality, 1,8 GB every 20 minutes and audio desync... no comment! ...then I tried the second export format: ASF...thats OK, the result is good... audio finally is syncronized with video.
My system is Windows Vista SP2 (32bit) and Internet Explorer 8... I tried also from an other pc with Windows 7... same problems recording from browser interface. I have installed on my system the lastest video codecs (for example: divx etc.).
For my usage I can use the Cisco Client but my ideal usage will be recording from browser.
I think these problems are very serious for a product as is this camera.
I hope there is a way to resolve they... maybe with a future firmware update or installing an other software.
Thanks
Robert

Monitoring audio in sync with video when capturing in FCP studio

Is there a way I can monitor audio in sync with video when capturing in FCP Studio? I know you can plug headphones into your tape deck but that sound is not in sync with the video in the capture window due to time delay. I tried plugging the headphones into my Powerbook but could not get any audio coming through these, nor audio through the Mac's inbuilt speakers.

The preview checkbox is ticked and the audio monitor indicates that sound is being picked up (the levels rise and fall) but I still can't hear anything! The audio/video sync on the external monitor is ok, but because there is a time delay between that and the video capture window, I can't use that as a reliable monitor for sound sync. If I could resolve the video sync problem there, then I could monitor the sound through the external monitor.

HT4589 When using compressor voice is not sync with video. What causes this and how to fix it, please?

When using compressor voice is not sync with video. What causes this and how to fix it, please?

Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
Let us know how you get on.

Voice does not sync with video

How do I sync voice with video when sky ping?

Hello @sudharma99,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your streamed videos do not sync with the audio, and that the playback is choppy. I would be happy to assist you in this matter!
To reduce the buffering time when streaming, I recommend following the steps in this document on How to Turn off Hardware Acceleration. I also suggest updating Java and Adobe Flash Player on your computer.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Voices are not sync with video after upgrade to imovie11

After the upgrade to Imovie11, the voices are not sync with the movie.
I digitaled a lot of Sony Handicam Video 8 (HI8) tapes, also many other tapes.
All the movies, incl. the new ones, has the problem with de voices.

I gather you are using DV files. Here's what you should expect after upgrading to version 9.0.2 of iMovie '11: if you have event-clips that are longer than an hour and half you will have a noticeable lack of synchronization near the end of the clip. The only way I know of reducing the gap between audio and video while still using iMovie '11 is to open the file in QuickTime 7 (not X) and trim the file so that only the footage your tying to fix is left. Save that shortened file and import it into iMovie. It should seem synchronized now. But there is probably a remaining problem: the picture quality is has been lowered by being in iMovie. To check this, open you DV files in MPEG Streamclip. If there is no improvement in quality, you're lucky. When I play my DV files (from Video8--the original analog 8mm video) in MPEG Streamclip the color and tones are much richer. In iMovie '11 (and, I think, iMovie '09), the picture is washed out, lacking color saturation and general subtlety. This makes all makes iMovie '11 (at least) essentially useless for DV files--if my experience is generalizable. What I don't know at this point is whether these two kinds of problems (lack of synchronization and picture degradation) are avoidable by using iMovie '06 or Final Cut Express.
Message was edited by: Paul Bullen

ITunes 11.01 on Windows 8 audio will not sync with video

I have a new computer that is running Windows 8, and I have had no issues with iTunes 11.01 thus far on it other than the fact that when playing videos, the audio will not sync up with the video.
With the ineptitude that seems to define Apple as of late, there does not seem to be any actual support for Windows 8, and the "support" channels do no good at all.
Any ideas as how to fix this problem?

I think Microsoft made the Windows 8 incompatible with Apple products on purpose, they want windows users to have to download apps from their paid service which is more expensive than Apple's App/iTunes Store

Audio loses sync with video on HD footage (CS5.5). 'MPEG decode error'

HI All,
I'm trying to cut this vox pops video together but the audio seems to lose sync. i noticed that there was a red circle in the bottom right of the screen with a cross in the centre. After clicking on it, i was greeted with this message...
I have a fairly powerfull machine so I'm unsure as to what the problem is. Any suggestions as it's making this task virtually impossible!!!
machine specs...
Please, any help appreciated!!!

Had this occasionally myself.
For me it was drop-out on the tape (at the very start of some sections luckily), even though CS5.5 did not register any drops when capturing.
If you're not using tape then you've got a card error. Checkout the video at or about Frame 32106. Check out the source material. Although Windows 7 Media Player is likely to show no errors and with your audio in sync - very mis-leading - a false positive.
Fix for me was to simply re-sync audio/video manually but upstream of the error. If not, you will likely find you will also get export errors when trying to export via AME.

Audio not synced with video

Similar Messages

Maybe you are looking for