Audio not working in media applications

So my audio works, all the little kde sound affects are there. but when I try to open a file in kaffiene or amarok it says "all audio drivers failed to initialize" or something along those lines. I don't know what else to do

Configure it to use the running Soundserver or disable the Soundserver and let dmix handle the mixing.

Similar Messages

Sound/audio not work

sound/audio not work
Model- Compaq M2000.
S/N; CNF550117L,
P/N-EE462Pa#UUF
M2235

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Search function in Help not working in any application

The Search function is not working in any application's Help. Upon entering the terms I need help for I get a hang at "Searching..." but never any result. This problem started sometime in the last year or so. Prior to that the search function in Help worked fine. My network connectivity is excellent.
I recently reinstalled OS X 10.5 but I'm sure the problem existed before that and persisted after the reinstall.
The reinstall was due to upgrading to 10.7 and only then finding that I had lost needed functionality, but I don't think this has anything to do with the current problem. All other aspects of Help seem to be working fine
I don't find any reference to this problem anywhere so I'm hoping someone can help with my Help(!) problem. Thanks in advance.

Try running your Leopard install disk again, as well as the 10.5.8 combo updater. This might reinstall any 'missing bits'.
You can do this without deleting the hard drive, just install straight over your existing system, but close all applications and external devices first.
Or you could also do this via an Archive and Instal:
How to Archive & Install:
http://support.apple.com/kb/HT1710
and this also:
http://support.apple.com/kb/HT2196?viewlocale=en_US
This document explains how to correctly reinstall a prior version of Mac OS X in the event that other troubleshooting does not resolve an issue:
http://docs.info.apple.com/article.html?artnum=25404
BUT: Don't install older versions of Mac OS than what came with your computer:
http://support.apple.com/kb/HT2186?viewlocale=en_US

FaceTime HD Camera (Display) not working with most applications

The Thunderbolt 27" LED Cinema displays built in camera is not working with most applications. The camera does not work with FaceTime, iChat, Skype and Google Talk. FaceTime says "There is no connected camera", even though there is. Weird thing is it DOES work at http://www.testmycam.com. I can't get it to work with any other flash based apps, just testmycam.com.
My MacBook Pro 17" (late 2011) built in camera works perfectly with everything.
Things I've already tried:
- Shutdown
- Restart
- disconnect/reconnect
- removing power from display
lame, lame, lame. $1k monitor, flippin' webcam doesn't work.

I think I have found the problem. I decided to go page by page through the forums and found this argument when running a Java program through the console:
-Dsun.java2d.noddraw=true
So it would be like:
java -Dsun.java2d.noddraw=true SwingSet2
That works flawlessly, so it has to do with direct draw (So it's either DirectX or my video card drivers which are up to date).

Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

Basics from the User Guide are restart, reset, restore from backup, restore as NEW. Unless you've tried ALL of these, you're not done troubleshooting.

Ac3 dts audio not working in my iphone but it works in my friends samsung mobile?pls help me.

Iam using o player... Ac3 dts audio not working msg showing

Settings > General > Reset > Reset Network Settings
Contact the carrier.

Debugger not working for BSP application

Hi All,
I have 4.6C sap installation and the debugger is not working for BSP Application even when i hard code the break points.
Can anyone help me on this issue.
Thanks and Regards
Shilpa

Hi Shilpa,
How many number of sessions are open ? If there are already six sessions open and then you try and get the debugger, it will not start, and you won't be able to catch that error also...!
Other than that there is no possibility that the debugger doesn't start, unless ofcourse, the logic doesn't reach the debugger point....
Hope this helps.
<b><i>Do reward each useful answer..!</i></b>
Thanks,
Tatvagna.

[svn:fx-trunk] 5019: ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/ AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spa

Revision: 5019
Author: [email protected]
Date: 2009-02-19 13:17:21 -0800 (Thu, 19 Feb 2009)
Log Message:
ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spark equivs
QE Notes: None
Doc Notes: None
Bugs: -
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Box.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Canvas.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Tile.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.as

Hi DST
This is a great effort and gesture. thank you on behalf of all the newbies.
PJ

HT201210 AUDIO NOT WORKING PROPERLY AFTER INSTALLED IOS7

After installed ios 7
photos not able to see fully
audio not working properly.... [no treble, no depth in sound, very low soung even the volume is full]
get strucks while playing games

This board is full of people that are update crazy...
even when they have perfectly good working systems.
i know i thought well it's just a security update not a major update.
Best advice... whenever updating the OS, unplug all
firewire devices.
will take note of that from now on.
Was this auto-update? Try downloading the file and
running the update again with all firewire devices
unplugged.
While the 828 is disconnected perform the factory
reset
again.
Disconnect the firewire cable from the 828mkII
-Press the Setup knob
-Turn the Setup knob all the way to the right
-Press the Select knob
-Press the Value knob
-Power off the interface and plug the firewire cable
back
in
-Power the interface back on
i have the original 828 not mark 2, so no reset i know of, just power on off.
After the Mac updates... reboot and plugin the 828,
see if that doesn't get you going.
pancenter-
cheers pancenter, i'll give it a whirl updating without the interface plugged in. thanks for all your help.

Windows 8.1 beats audio not working

Product name: HP ENVY TouchSmart Sleekbook 4
after update windows 8.1 beats audio not working
This question was solved.
View Solution.

Download the file below and instll , Restart and give your beats a try again. If you cant find Beats go to (Control Panel) and search (Beats Audio) then right click on it and create a shortcut, you should now have a shortcut to Beats Audio on your (Desktop)...
Let me know if this helps ...
DOWNLOAD LINK
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=ob-124012-1

(not working)Creative Cloud applications unexpectedly revert to trial mode

I have an Creative Cloud accound but photoshop keeps gooing back to the trail mode. I have tried the help provided bij Adobe but this does not work ( Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM ). There should be an deactivate option in the help section but this is nowhere to be found. Hope there is an other sallution or maybe i should just delete and reinstall everything. But then i need a way to recover my action's.

in cc apps there is no deactivate option. that's been changed to a 'sign out' option.

Laptop left Speaker audio not working

Sir,
I have dv-5 1102 tu model laptop, in that left speaker audio not working. But, in headphones & Speakers have no problem in both left & right audio.
Kindly do the needful

Hey @KKVK ,
Welcome to the HP Forums!
I understand your left speaker is not working on your dv5 notebook.
If the headphones are working it would tell us the sound card is fine. The same properties are applied to the speakers and the headphones in your audio control settings.
You could try a system restore to before the issue started to make sure it's not something in the operating system. To perform a system restore see the following guide: Using Microsoft System Restore (Windows 8) or Using Microsoft System Restore (Windows 7).
If this fails I would suggest contacting HP Phone Support to send the notebook for service. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Sound not working on some applications for iPhone 4S

I have an iPhone 4S, the sound is not working on some applications like music, videos when I press the + and - buttons, the volume icon appears but the slider is empty. The weird thing its ringing normally, working properly during phone calls even when on speakers. The mute switch isn't on, I have tried to reset it and restart it, nothing happened

Sensor works very well, both on 4S and 5 but people do not know how to set it correct.
1. You need to set slider on minimum brightness
2. Turn auto-brightness one ON/OFF and set it on ON, than it will adjust automaticly
"Auto-Brightness:
The auto-dim feature got significantly improved in iOS 6. The best improvement is brightness adjustment in the lock screen. Before, in a dark room, I would be blasted with the iPad or iPhone’s default brightness before sliding to unlock and having it dim down to match the room’s brightness. Now, from the moment the screen turns on, the brightness is appropriate.
In all previous versions of iOS, the light sensor would sense the room’s brightness and then suddenly make the brightness adjustment. In iOS 6, the auto-brightness adjustment is gradual and much more subtle, like the Mac. "

Audio not working on channel 5 and 7,, okay on all others????

audio not working on channel 5 and 7,, okay on all others????

dalharris wrote:
audio not working on channel 5 and 7,, okay on all others????
Without knowing all of the specifics in your situation, you may want to try these options:
- If you have a DTA, and your remote control has a LANG button on it, press it.
- If you have an HD or SD full cable box:
Most low or no audio issues can be corrected by setting the Optimal Stereo output of the cable box. Here are the steps: Press the Menu button twice on your remote control. Select Setup. Select Audio Setup Under the Optimal Stereo setting, choose "Select to Optimize" and press OK/Select on the remote control
- The audio settings on your cable box may have accidentally been changed:
Press the Menu button twice on the Comcast Universal Remote Control. A new screen below will appear, with the top-left option automatically selected.
Use the down-arrow key (above the Info button) to navigate to Setup and press OK/Select (the center key on the remote control in the middle of the 4 arrow/directional buttons).
Use the down-arrow key (above the Info button) to navigate to Audio setup and press OK/Select.
The Default Audio Track will default to the first option–Channel default–which which is always the channel’s main audio track (unless it was previously changed).
Press the right-arrow navigation key to change the audio track. Changing this selection will instantly change the audio.
1. Press once for English
2. Press twice for Spanish (Español) OR to activate Video Description (DVS)
3. Press three times for French (Français) 4. Press four times for Portuguese (Portugues).
5. Then press the Exit button (above the Volume button) to resume program viewing
Please note: These audio options can only be heard if the program provider or cable channel is providing that additional audio option.
- If the above does not help, look at the remote control for your TV set (not your cable box) as the TVs language settings may have been accidentally changed (sometimes labeled as MTS or SAP on the remote or via your TVs settings menu).

My camera works with the photobooth and with skype but does not work with online applications such as "lolcam from facebook" or "faceonthehole" application. Please help

My camera works with the photobooth and with skype but does not work with other applications like the "lolcam" from facebook or the " faceonthe hole" application. Can anyone help?

There was a issue with school computers being used to spy on kids in their bedrooms, Mac's were involved.
So Apple most likely tightened the API's to only select, trustworthy companies as not to abuse the web cam access priviledge.
If you want to use a web cam with these other programs and services, you'll likely have to buy a third party USB one, so you can manually disconnect it.
There isn't a way to physcially disconnect the built in web cam on Mac's without busting open the machine.

Audio not working in media applications

Similar Messages

Maybe you are looking for