Audio not working once i upgraded to windows 7

Once i upgraded, i cant hear any sound from my internal speakers, i can only hear sound from my headphones, can someone please help.
i have a HP pavillion dv7 notebook
my speakers and dual speakers are
IDT high definition audio codec as my default device
i dont know a whole lot about computers, i pretty much know the basics, so getting into the area of downloading new software and drivers does get confusing for me because i dont know which software to download or install. can someone please help me.

Here is a guide for No Sound From Speakers Win7.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

Trackpad Not Working Properly Following Upgrade to Windows 7

I recently did an in-place upgrade from Vista 32 bit to Windows 7 32 bit on my Lenovo T61p. I also updated all the Thinkvantage drivers and software and have been checking daily for additional updates. Following the upgrade I noticed that the trackpad is not working properly. When I'm typing an email message in Outlook 2007, the trackpad and buttons will not work in the body of the message. I can click on the icons in the ribbon, but nothing works in the body of the message. Same behaviour in MSWord 2007 and Excel 2007. I uninstalled and re-installed both the Ultranav drivers and software utility, using the Windows 7 32 bit versions posted on the Lenovo website, without any improvement.
I contacted Microsoft technical support and spent an hour on the phone with a Windows 7 technician. He concluded that the problem was with the trackpad driver and was Lenovo's responsibility to address. I then contacted Lenovo technical support and the technician said there was nothing he could do to help me. Disappointing response from both organizations. I've reverted back to the Windows PS2 mouse driver for the time being.
Any suggestions would be most appreciated. Thanks

In fact, the problem could be due to the installation of Client Security Solution 8.3 for Windows 7 (http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73785). It has been discussed here: http://forums.lenovo.com/t5/Windows-7-Discussion/CSS-8-3-64-bit-WIN7-Office-2007-Mouse-issues/td-p/1...

Beats/IDT Audio not working on Pavilion dv6 running Windows 7

A few months ago my speakers would stop responding midway through audion or video. I assumed a restart was in order and did just that. Problem solved, many times over. Tonight, however, my audio would not work upon restart plus iTunes wouldn't open claiming an issue with my computer's sound properties. I uninstalled/reinstalled IDT audio, tried updating the drivers, updated just about everything else on my computer yet still no sound. My computer relates to me that everything is okay and in perfect working order while the diagnostics state that my sound is not working.
Headphones also don't work. Any thoughts?

Hi,
The following package is for Windows 7 64bit:
http://ftp.hp.com/pub/softpaq/sp59501-60000/sp59882.exe
for both 32bit and 64bit (older):
http://ftp.hp.com/pub/softpaq/sp56501-57000/sp56996.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Plug and play speakers not working properly after upgrading to Windows 8.1

After upgrading to Windows 8.1, my plug and play speakers do not work properly. I have uninstalled and reinstalled them, and restarted. When I try to play music, nothing comes out. If I turn them off and back on, music will play for approximately 30 seconds, only from one speaker, then it turns off and fades to no sound. They worked fine until I upgraded to Windows 8.1. The manufacturer has not been able to successfully assist me. Has anyone else reported a similar issue after upgrading OS software? Any suggestions? These are fairly new speakers, less than 2 years old, and not used very much. I do have them installed via a K-V switch, and all other devices linked to the K-V switch are functioning properly (monitor and wireless keyboard). Any suggestions would be greatly appreciated.

@sisboldt ,
Hello and thank you for posting on the HP support forums.
So that I can better help you with your sound issue. Please post back with your full model and product number. Use this link to help you find the information.
HP Notebook PCs - How Do I Find My Model Number or Product Number?
Here is another link you may find useful. Please give it a read before posting back with your system information.
Advice for asking the "Very Best Question"
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Presonus firebox will not work once i upgraded and they have no addl driver

my MACPro with firebox always worked with LEOPARD
steady blue light on
now i get a click every 3 seconds
once i upgraded to snow leopard
has this happened to any of you
in audi midi the presonus is not recognized
nor in SOUND in syst prefs
any help id appreciate very much
gl

First, update iTunes, then connect the phone to the computer and do a restore. This will also get your iOS up to date. Your phone should operate correctly after doing this, if not, you will most likely need to have the phone serviced or replaced.

HD Audio not working on Macbook Pro via Windows 8

I've tried nearly everything to get the driver working, Windows states that the best driver is in use.
http://i.imgur.com/FmQtV.jpg Here is a screen shot of the device manager.
I've tried realtek hd drivers, Cirrus drivers, enableing, disabling the driver just about everything.
Bootcamp is useless too.

Try install the newest Intel® HD Graphics Driver.
http://downloadcenter.intel.com/Detail_Desc.aspx?lang=eng&changeLang=true&Dw nldId=22376
It includes the Intel displayaudio driver and some people solve the audio problem on Windows 8 after install this driver.
Rember backup first before test the driver.

TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix. I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z. Any help? Thanks.

after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
basically everything is clean now. At least i hope and works fine. touch wood!

Windows 8.1 beats audio not working

Product name: HP ENVY TouchSmart Sleekbook 4
after update windows 8.1 beats audio not working
This question was solved.
View Solution.

Download the file below and instll , Restart and give your beats a try again. If you cant find Beats go to (Control Panel) and search (Beats Audio) then right click on it and create a shortcut, you should now have a shortcut to Beats Audio on your (Desktop)...
Let me know if this helps ...
DOWNLOAD LINK
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=ob-124012-1

Dv3-4103TX audio not working

i upgraded my dv3-4103TX which was originally a windows 7 to windows 8 several months ago. One day the audio and the volume keys suddenly stopped working. The keys for audio are not functioning such as play,pause,stop,volume -,+ and etc. i tried troubleshooting and updating but it could not fix the problem. I tried plugging in an earphone but still there is no sound

It would seem that a Windows update may have disabled the sound.
Your notebook does not have support for Windows 8.
There are two ways to approach this. Method 2 is the simpler method.
1)
You can try installing the quick launch software for Windows 7 in compatibility mode.
You can go to the Intel download center to see if the Intel IDT audio driver is available for your notebook.
2)
If you can remember more or less when the audio stopped working, then you can use Windows System Restore to attempt to return your notebook's OS to a restore point dated before the sound issue began. That will return your notebook's OS to the state it was in when the audio worked and the audio keys worked as well. System Restore will not delete any of your data files (photos, movies, music) so those are safe. . Do not use Windows 8 Refresh to do this. You will use all of your private data with Refresh unless you are using a custom Refresh image.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

HP ProBook 440 G2, Finger print reader not working when I upgraded form Win 7 Pro to Win 8.1 Pro

My HP ProBook 440 G2, Finger print reader not working when I upgraded form Win 7 Pro to Win 8.1 Pro.
In device manager showing that biometric reader is working properly. But actually the finger printer reader is not reading or senseing. It seems like "dummy" part. Please help me to correctly configure step by step for this issue.
thankyou
Hillet
This question was solved.
View Solution.

Have you installed the Validity Sensor Fingerprint driver software for Windows 8.1?
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943811&swItemId=ob_134806_1&swEnvOid=415...
See page 64 in the following Windows 8.1 user manual for Validity Fingerprint setup information
http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=6943810&docId=emr_na-c04371762&docLocale...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Product key will not work with this edition of Windows 7

I received a product key for Windows 7 Professional N whilst I was at University via Dreamspark. I'm building a new computer and when it's come to inputting the product key, it comes up saying Product key will not work with this edition of Windows 7.
The version I installed was Windows 7 Professional using an iso and a USB. I rang the phone activation number and when I got through to a representative, I gave him the product key and he said it is valid and should be working. He transferred me to technical
services but instead I got cut off.
At this point I'm really not sure what the issue is, the key was for Windows 7 Professional N, I installed Windows 7 Professional and customer support confirmed it as a valid key. Am I missing something?

Post your issue to the Windows 7 Genuine Issues forum. Here are the instructions on how to produce a diagnostic:
MGA
Diagnostic Report:
To properly analyze and solve problems with Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
Once downloaded, run the tool.
Click on the Continue button, after a short time, the Continue button will change to a Copy button.
Click on the Copy button in the tool (ignore any error messages at this point), and then paste (using either r-click/Paste, or Ctrl+V ) into your post.
One
Issue Per Thread:
Most Activation and Validation issues look the same, on the surface, but can have many different causes and fixes. This is why we ask for a diagnostic report and this is also why we ask that you create your own thread for your issue (in other words,
don't post your issue in another person's thread).
It just becomes too complicated to try to troubleshoot multiple different issues in the same thread.
New
to the Forums?
Instructions
by Kamin of Ressik
Wanikiya and Dyami--Team Zigzag

Will my F-Secure security product keep working when I upgrade to Windows 10?

QuestionWill my F-Secure security product keep working when I upgrade to Windows 10?
AnswerYes. All supported versions (12.1 or newer) of F-Secure security products are automatically migrated when you upgrade from Windows 7, Windows 8 or Windows 8.1. However, there are two conditions that may result in Windows 10 to remove your F-Secure application:
If you are upgrading from Windows Vista or earlier to Windows 10, all applications are removed. You will then need to reinstall your F-Secure security product manually after the upgrade.
If you are upgrading from Windows 7, 8, or 8.1, F-Secure security product might get removed depending if you do not have the supported version of F-Secure installed. You will then need to reinstall your F-Secure security product manually after the upgrade.
Note: Make sure that you download the latest version of our product when reinstalling the product on Windows 10.

You will likely find that drivers are not readily available for Windows 10 on HP site. When Windows 8 was released it was a slow process rolling out drivers and many early adopters were not happy. I agree with -wait for a few months at least. Check your models support page for release of Win 10 drivers also before deciding.

Laptop left Speaker audio not working

Sir,
I have dv-5 1102 tu model laptop, in that left speaker audio not working. But, in headphones & Speakers have no problem in both left & right audio.
Kindly do the needful

Hey @KKVK ,
Welcome to the HP Forums!
I understand your left speaker is not working on your dv5 notebook.
If the headphones are working it would tell us the sound card is fine. The same properties are applied to the speakers and the headphones in your audio control settings.
You could try a system restore to before the issue started to make sure it's not something in the operating system. To perform a system restore see the following guide: Using Microsoft System Restore (Windows 8) or Using Microsoft System Restore (Windows 7).
If this fails I would suggest contacting HP Phone Support to send the notebook for service. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Audio not working on channel 5 and 7,, okay on all others????

audio not working on channel 5 and 7,, okay on all others????

dalharris wrote:
audio not working on channel 5 and 7,, okay on all others????
Without knowing all of the specifics in your situation, you may want to try these options:
- If you have a DTA, and your remote control has a LANG button on it, press it.
- If you have an HD or SD full cable box:
Most low or no audio issues can be corrected by setting the Optimal Stereo output of the cable box. Here are the steps: Press the Menu button twice on your remote control. Select Setup. Select Audio Setup Under the Optimal Stereo setting, choose "Select to Optimize" and press OK/Select on the remote control
- The audio settings on your cable box may have accidentally been changed:
Press the Menu button twice on the Comcast Universal Remote Control. A new screen below will appear, with the top-left option automatically selected.
Use the down-arrow key (above the Info button) to navigate to Setup and press OK/Select (the center key on the remote control in the middle of the 4 arrow/directional buttons).
Use the down-arrow key (above the Info button) to navigate to Audio setup and press OK/Select.
The Default Audio Track will default to the first option–Channel default–which which is always the channel’s main audio track (unless it was previously changed).
Press the right-arrow navigation key to change the audio track. Changing this selection will instantly change the audio.
1. Press once for English
2. Press twice for Spanish (Español) OR to activate Video Description (DVS)
3. Press three times for French (Français) 4. Press four times for Portuguese (Portugues).
5. Then press the Exit button (above the Volume button) to resume program viewing
Please note: These audio options can only be heard if the program provider or cable channel is providing that additional audio option.
- If the above does not help, look at the remote control for your TV set (not your cable box) as the TVs language settings may have been accidentally changed (sometimes labeled as MTS or SAP on the remote or via your TVs settings menu).

My outgoing mail is not working after the upgrade OS to mavericks. my mail client version is 7.1 . please help me resolve this issue

My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue

Please let me know , How we can reinstall apple mail ? .
1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
2. After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
a)Not showing any SMTP connection in TCP trace ,
b) Connection docter every time Says "Connecting to the server "
3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
Please help me .
Thanks,
Ranesh..

Audio not working once i upgraded to windows 7

Similar Messages

Maybe you are looking for