Audio Not Working with my iChat Video

I have been using my iChat with my iSight for over a year and all of the sudden when I am attempting to chat with my pal, the video works, but my audio isn't.
What is also strange is that for the last few days, I wasn't even able to get into video chatting because of Bandwidth problems.
I haven't made any changes recently...hmmm?
In my Sharing:
I have listed for my TCP Port Numbers:
5060, 5190, 5220, 5222, 5298, 5353, 5678, 16384-16403
Can anyone help?

Hi Christine,
Not sure what you meant by your "modem not being active".
A Modem is the device that connects you to the internet.
With a dial-up modem this just makes the conversion bewteen the computer's signals to those acceptable over the telephone system.
ADSL and cable modems do a similar job in an "always on" way.
However most of these device can route as well.
Now it is possible on some devices to set them so that they are in Bridge mode. This means they act more like a dail up device and do not route.
Moving on from this, we have some devices that although, the pass on the the login to the internet responsibility to the next device in line (an additional router or a computer), also require the ports to be opened.
Soooo. With me so far ?
These ports can be opened by different methods (depending on the devices capablilities).
One method is Port Forwarding.
This reqires that you list the ports you wnat open and it gets pointed to a IP address on your local network (Computer).
I was aksing if anything likel this last stage ahd ever been done to your Modem ?
4:15 PM Friday; June 9, 2006

Similar Messages

Audio not working in Photo Booth, video works fine

When I record video in Photo Booth the video works fine, the audio does not work. I have looked through other forums and tried what they have suggested but nothing is working. I sware it worked once but now I can't figure it out.

Lance Mcvickar wrote:
I have listed it with google and you would think with the .com we would come in first in a search but we are slowly going further and further back in the listings and never made it to the top. Any insight as to why that might be.
Lance ~ It could be because iWeb websites are not made to be search engine friendly. See this article:
_SEO For iWeb: How to get your iWeb Websites into Google & Other Major Search Engines_
By the way, a tip... Instead of posting your site's URL like this:
www.thehorseyourodeinon.com
...include the prefix like this:
http://www.thehorseyourodeinon.com
...then it will be easily clickable in your post. And before posting, you can switch from Compose mode to Preview mode to verify that the hyperlink actually goes to your site when clicked.

IPhone 5 Bluetooth Audio not working with stock Toyota radio

I have a 2010 Toyota 4Runner Limited which has the premimum JBL radio in it. Up until recently, I have had an iPhone 4 which worked well with both hands free phone features, along with Bluetooth Audio so I can stream my music from iTunes or Amazon Cloud Players. I dont use the feature all the time, so I am not sure when it stopped working (after upgrading to IOS6 or upgrading to an iPhone 5) but bluetooth audio no longer works. I can still use the bluetooth phone features, but if I go to the bluetooth music tab on my stereo, it states that the portable player is not connected. Siri also works fine through bluetooth, as it it can read my text messages, ask and answer questions through the car stereo, though I cannot make an outgoing call with Siri because after it shuts off siri and starts to dial, my stereo disconnects.
I know Apple updated the bluetooth, but you would think the new version would be backwards compatible, right? Is there a plan from Apple to fix this, because I am sure Toyota isnt going to update the firmware on their stereos just to fix an issue with one phone...

Actually, as an update, mine is now working (the BlueTooth Audio part, Siri still cannot place calls).
I have done this on my first (now smashed) iPhone 5 and my new iPhone 5. It takes a lot of trial and error, but you can get it to work.
First thing is with the iPhone 4, all I had to do was connect the phone in the phone connect screen and it just worked for both. Not so with the 5. With the 5, I have to register it both in the Audo Settings> Bluetooth Audio Settings menus as well as the phone settings on the radio. I didnt know there were two different connections with two different pins. (0000 and 1212). I forget which one you have to connect first, but again, I tried it so many times both installs and it eventually worked. It may be easier to change the name of either the Phone or Bluetooh Audio name from Car Multimedia, so the iPhone can easily connect to one or the other, but I left them both with the same name. I can now play music, and when the phone rings, automatically swaps over to that one.
Play with it and you will get it to work. If I have time, i will remove it and do it again and write down the steps.

ALL flash audio not working with G930 headset unless audio jack plugged in once and activated

Problem: Inexplicably and sporadically, ALL flash audio is mute in FF when using a wireless G930 headset connected to USB dongle (physically or wireless), but everything plays fine in Chrome and Explorer. I'm here to tell you what worked for the sake of others, and to make the FF team aware of a problem worth their attention.
Statement: Everything is up to date. FF, extensions, Flash, Java, Windows. I uninstalled flash on FF and my machine and reinstalled on both. My headset audio device is correctly activated in WIndows Audio Devices - all other devices are deactivated.
My current solution: I learned from a prior FF issue involving YouTube videos that YT has something called DASH playback, requiring you to plug in an audio cable to your machine, or the video won't play (WTF right?). An extension called "YouTube Center" fixes this by allowing you to turn off DASH playback. After plugging in a set of earphones into my computer's audio jack, I activated the audio device on the machine, and got audio through the earphones and headset. I then disconnected the earphones, and disabled the audio jack. Audio now works fine on the headset, and I've rebooted the machine, turned the audio jack back on, rebooted firefox multiple times to make sure. Currently, things are fine, but I'm reluctant to plug anything back into the jack.
For some strange reason, FF seems to have trouble recognizing my G930 headset as a valid audio device, or that's my guess. The fact that everything is peachy in other browsers should narrow down the culprit.
Hopefully this helps someone else, and we can find out what the core bug is to make things right.
Ask any questions if you have them and I'll try to get back.

Very nice work.

MSI GT70 audio not working with hmdi after windows 8.1 update

When I connect my laptop to the TV, the video comes out fine, but the audio for the TV does not show up in playback devices. It worked fine with windows 8, but after the windows 8.1 update it stopped.
I have tried updating realtek drivers, but it still doesn't show up. updating other drivers also doesn't work. plugging the cable into the computer then booting it up also doesn't work like it did for other people. This is really making me mad... any help would be appreciated.

Quote from: zipper.sippola on 16-December-14, 23:25:58
Pah, no probs to my ext. monitor speakers via HDMI, GT70 0NE, Win 8.1.
Have you tried assigning HDMI one on audio tab as default and see if sound will come out to tv? if so then that was the problem.

Macbook OS X Yosemite - Logitech headset output audio not working with Rosetta Stone

So I got my macbook air 2014 with Yosemite software and I installed Rosetta Stone and I couldn't get the Logitech Headset (H540) to get the output audio through it. The software will accept the microphone audio, but it will send the output audio throughout the internal speakers of my macbook air, or even worse, it will freeze the program until I disconnected the headset (as soon as I unplugged it from the usb, the software will continue like a nothing was going on).
So I look in dozens of webpages trying to find a solution, but I there was none. I read that for some people creating a "multi-output device" in audio midi resolved the issue, but for most people including myself, it didn't work.
So after trying different options in the Audio MIDI setups, I found the solution!! : If you change the "format" from the default 16000.00 Hz to one higher, it will work like a charm! Now everything is working perfectly for me, including the main reason of this research: Rosetta Stone program.
I hope this post helps and saves a lot of time to any of you having this same problem.
If any other questions (or thanks ) reply to this post.

This is great! I've got one follow-on problem to this, though: My format rate seems to keep snapping back to 16000, and breaking until I go back and fix it again (32000 works fine for me). Any idea how to twiddle things so that 32000 is the default for my device?

Why Firefox not working with many Youtube videos?

I use Firefox 13.0.1 on a Mac OS X 10.6.8. Beginning from August, many of the Youtube videos cannot be played, with the error message:
" The Adobe Flash Player is required for video playback. Get the latest Flash Player"
I clicked the clickable "Get the latest Flash Player" and installed it. But the same error message continues to show up. I repeated the process 3 times, the problem remains.
The Safari on my machine, however, has never had the above problem.
Could you let me know how to make these Youtube videos play with Firefox?
Thank you!

You could try uninstalling Flash completely and go directly to the Adobe website and download it. If that doesn't work I would uninstall Firefox and re-install it and see if the problem continues.
All the best,
Knownware

Hp Dv6700 Special edition Laptop audio not working with Television Via HDMI

I have a HP Dv6700 Laptop Special edition laptop windows 7 64 bit which is connected to my Emerson 32" Flatscreen TV,
The Picture is working perfectly fine, but there is no audio being tranferred, nor is there a device in the sound devices listed as "Hdmi"
I checked both the realtek and the other device for driver updates and both were up to date.
Anything else I can provide, please let me know.
His Majesty,
Fwish

Hello @Lord_Fwish,
Welcome to the HP Forums, I hope you enjoy your experience!
I have read your post on how there is no sound coming from your HDMI TV connecting to your notebook computer, and I would be happy to assist you in this matter!
To correct this issue, I recommend following this document on Resolving HDMI Display and Sound Issues (Windows 7 and Vista). This should help to correctly produce sound from your HDMI connected TV from your computer.
For further assistance, I will need to know:
The Product and Model Number of your notebook computer.
The version of Windows you have installed on your computer.
If your computer has completed all of its important Windows Updates.
If you have updated your HP drivers using the HP Support Assistant.
If this is an on-going, or recent issue.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Audio not working with Skype

after downloading skype from its website, the microphone or the incoming volume isnt working on skype calls. i tried calling my friends and nothing... i couldnt hear them, they couldnt hear me

I have the same issue. We were approved for PIC federation yesterday. I ran through the Microsoft provisioning guide and removed the existing Skype federated provider "Remove-CsPublicProvider -Identity skype" and added it again "New-CsPublicProvider
-Identity Skype -ProxyFqdn federation.messenger.msn.com -IconUrl "https://images.edge.messenger.live.com/Messenger_16x16.png" -VerificationLevel 2 -Enabled 1". I added my hotmail.com email address which had long since been linked to my Skype account.
I signed out of Lync and then back in. I can see the new Skype icon in the Add a contact outside your organisation wizard. It allowed me to add the contact but it appears offline. If I try to IM it tells me that the contact is offline.
However I can place an audio call from Skype to Lync and from Lync to Skype with no issues. I guess I will wait a little while (as many are suggesting) and see if that fixes it. I'm at a loss as to why else it wouldn't work.
Best Regards Randy Chapman

MUSIC VIDEO -SURROUND SOUND NOT WORKING WITH 7.0

My surround sound 5.1 does not work with downloaded music video playblack on windows iTunes 7.0. It used to work before I updated to 7.0. At first, my surround sound would not work with 7.0 for any iTunes songs, not just downloaded videos. However, that was corrected with the version 7.0.1 update. However, surround sound still does not work on videos I am trying to play back. This includes music videos that I purchesed both before and after downloading iTunes update 7.0.1. Has anyone got any suggestions for how to fix this problem so that my surround sound 5.1 will work on playback of the music videos?

I have an Airport Express that is linked to my TV. It is interfaced to my Denon AVR. To get surround sound I had to just select the correct output option via the Denon. Then the speakers set up for SS would work.
MJ

FaceTime HD Camera (Display) not working with most applications

The Thunderbolt 27" LED Cinema displays built in camera is not working with most applications. The camera does not work with FaceTime, iChat, Skype and Google Talk. FaceTime says "There is no connected camera", even though there is. Weird thing is it DOES work at http://www.testmycam.com. I can't get it to work with any other flash based apps, just testmycam.com.
My MacBook Pro 17" (late 2011) built in camera works perfectly with everything.
Things I've already tried:
- Shutdown
- Restart
- disconnect/reconnect
- removing power from display
lame, lame, lame. $1k monitor, flippin' webcam doesn't work.

I think I have found the problem. I decided to go page by page through the forums and found this argument when running a Java program through the console:
-Dsun.java2d.noddraw=true
So it would be like:
java -Dsun.java2d.noddraw=true SwingSet2
That works flawlessly, so it has to do with direct draw (So it's either DirectX or my video card drivers which are up to date).

Video & Voice Chat Not Working With ichat

Voice Chat and Video Chat is not working with ichat 6 in booth google and yahoo. One side is ichat and the other side is yahoo & google talk clients, Please confirm whether its a workable scenario or it only supports ichat to ichat.
Thanks & Regards
Sreejith R

Hi
Other alternatives based on the amount of info in your post.
Has she set up her Google Name in iChat or is she logged on via the Web Site (Google Mail page) ?
iChat cannot Video to the Google Mail Login page chat option or to the app called GoogleTalk on a PC.
Another thing.
If you login to the GoogleMail Web pages you will get logged out of iChat (GoogleTalk account) to a partial extent which may explain the loss of Video or Audio iCons.
iChat reports in a Text chat window that you have Logged Off.
However you seem to be able to continue the chat - but it separate from the web Page chat - You send from the web page and that chat will get the next response, send from iChat and it gets the next response (I can't remember if the Buddy told me he got two Chat windows at his end)
9:26 PM Wednesday; May 12, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

HDMI Audio not working on Q190 (along with all higher level Audio Formats)

Help, I have been given the run around via support, I cannot get the HDMI audio to work with my Pioneer Surround Sound, only the Intel display audio shows in control panel (Win 8 X64) and the RealteK S/P Dif port and it is not capable of supporting 7.1 sound or bitstreaming or DTS, Dolby HD, Etc. Tec support appears not capable of fixing the issue and wanted to send me to software support and pay. I have only had the machine for 4 days and it has never supported higher level sound.
Every other device I have (had or currently) connected to the receiver works just fine. I have to figure this out or return the machine, the audio is the most important aspect for me. Besides when you advertise 7.1 support the machine you sell should be able to do it.

Hey guys,
I have had this Q190 with the Celeron CPU since last week and I am using XBMC Frodo and the HDMI is connected to my AVR Onkyo TX-NR809 and from the Onkyo to the TV. And the sound is 7.1 with PLIIZ. It works fine. I think it may be some driver problem because Realtek Audio which is in the Q190 works fine with the Win8 preinstalled. Realtek is kind of bad with driver because I lost my wifi after upgrading to Win 8.1. After a few days with no wifi, I found out that the driver was bad, yes it was a Realtek wifi driver but posted by Lenovo for W 8.1.
I have another friend who also just bought the Q190 and he reported no audio problem so I think it is just a matter of trouble shooting the drive and configuration. I do love the form factor of the Q190.

Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

Basics from the User Guide are restart, reset, restore from backup, restore as NEW. Unless you've tried ALL of these, you're not done troubleshooting.

M-Audio MIDISPORT UNO USB Not Working With Snow Leopard

My Snow Leopard installation worked fine except until I plugged in my MacBook to my Casio Privia with the M=Audio MIDISPORT UNO USB cable to run GarageBand. I'm getting a MIDI error which states it can't work with the latest operating system. It doesn't surprise me though for all the software and hardware driver updates that have to catch up to such a new OSX 10.6. I went to the M-Audio site to download the latest driver, but the drivers only were compatible with OSX10.5.8.
This is an alert at the site
Mac OS X 10.6 Snow Leopard Support Coming Soon
Avid/M-Audio working closely with Apple to offer support for OS X 10.6
Avid/M-Audio is pleased to hear that Apple has released Mac OS X 10.6 Snow Leopard. We’ve been working closely with Apple to bring Snow Leopard support to the M-Audio® product line, as well as the Pro Tools® product line and extended product families. We ask that all existing Mac users please wait to upgrade until we officially announce Snow Leopard support. Stay tuned for more information in the coming weeks.
This is a bit of a concern, because I need to get GarageBand running again with the MIDI hook ups. Is there a work around anyone knows about to get MIDI working with Snow Leopard.
Thanks Steve

I ran into a similar problem. I discovered one thing which may help you out though. It works OK with my Yamaha P200 keyboard but it does not work with my Yamaha NP30 keyboard. I looked at the MIDI stream and the only difference seems to be that the NP30 sends a continuous stream of MIDI clock, whereas the P200 does not. My theory is that this clock stream is somehow confusing the driver. I can't seem to disable the MIDI clock on my NP30 but if your Privia has the ability to disable MIDI clock, then it may be worth a try as it will probably fix the problem until they come out with the proper drivers.

Audio Not Working with my iChat Video

Similar Messages

Maybe you are looking for